Ken,
Okay. Will do. I will not leave the thread in a hang…
Regards,
Brian
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice
Sent: Friday, November 8, 2013 11:04 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Errors during compiling from today's 1.2.stable build
There shouldn’t be any impact... That particular flag was needed quite a while ago to avoid issues with stupidity in how “Enterprise Linux” platforms like to link to all sorts of things and shouldn’t really be needed (imho that is)
I suspect something is wrong with that particular platform...
If you continue having build problems and can replicate it on another box, please get a log of bootstrap.sh, configure and make output and open a jira
See http://wiki.freeswitch.org/wiki/Reporting_Bugs
On 11/8/13 11:51 PM, "bedgar@vseinc.com" <bedgar@vseinc.com> wrote:Ken,
What is the impact of remaking on an existing node’s build without that configure parameter?
I still have yet to run through the iterations. I did not use –j. I am very careful of adding options. The only other deviation I usually is ./devel-bootstrap which I did not use here.
I will post my results when possible.
Regards,
Brian
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice
Sent: Friday, November 8, 2013 10:24 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Errors during compiling from today's 1.2.stable build
Gaaahhh ok that’s just wrong and I will remove that from the wiki... But you have something else wrong it appears... I just build using the command
./bootstrap.sh && ./configure --without-pgsql && make
Without issue on a fully updated centos 6.4 x86_64 install...
Are you sure you arent doing something like make –j?
On 11/8/13 11:00 PM, "bedgar@vseinc.com" <bedgar@vseinc.com> wrote:Ken,
This is based on the wiki which has been followed precisely since moving to CentOS 6.x. Is this no longer valid? Is there a clarification needed in the wiki?
https://wiki.freeswitch.org/wiki/Installation_Guide#CentOS_.26_RedHat_Enterprise_Linux
Release(es) 6 and Later
A change by Red Hat in RHEL 6 and later releases was to compile the kernel to run tickless by default. As previously brought up on the mailing lists, it is recommended that the kernel's tickless feature should be disabled for optimum performance when running FreeSwitch under the newer operating system's kernel. You can disable the tickless feature by appending nohz=off to your boot options under GRUB. The GRUB start up configuration file is located under /boot/grub or as /etc/grub.conf. Add it to the line beginning with "kernel". This is also applicable to Fedora releases 8 and later.
Also, when using release 6 and later, make sure to configure with "./configure --without-pgsql", this is to make sure that FreeSWITCH uses it's own curl library, instead of the system provided, and that it doesn't try to use the system provided postgresql libs. If using the system provided versions linking errors will occur. Hopefully this will be auto detected in a near future. Related Jira issues were: FS-3384, FS-3630, FS-3384 and FS-3393.
In addition, FS may not behave 100% correctly in CentOS 6.x, please review Jira issues: FS-4396, FS-4316, FS-4291
UPDATE: We have anecdotal evidence that CentOS 6.3 does not seem to have the problems listed above. If you experience any of the above symptoms with CentOS 6.3 please comment on the Jira cases listed.
Brian
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice
Sent: Friday, November 8, 2013 9:43 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Errors during compiling from today's 1.2.stable build
Why are you using —without-pgsql?
On 11/8/13 10:18 PM, "bedgar@vseinc.com" <bedgar@vseinc.com> wrote:Sorry, Ken:
./bootstrap.sh
./configure --without-pgsql
make
sudo make install
These are my standard orders and were also followed in this case.
Brian
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice
Sent: Friday, November 8, 2013 9:02 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Errors during compiling from today's 1.2.stable build
What configure line are you using, I don’t have any problems on cent 5 or 6 32 and 64 bit versions
On 11/8/13 9:29 PM, "bedgar@vseinc.com" <bedgar@vseinc.com> wrote:Ken and Anthony,
Sorry for the repost as it did not stay in the thread –
This is on a physical server that was already successfully running 1.2.14. It is CentOS 6.4.
It was a fresh git to an empty directory.
Only special thing was the configure requirement that I always do for CentOS.
Brian
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Ken Rice
Sent: Friday, November 8, 2013 5:28 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] Errors during compiling from today's 1.2.stable build
What platform is this on?
On 11/8/13 5:57 PM, "bedgar@vseinc.com" <bedgar@vseinc.com> wrote:I had trouble building from a git of 1.2.stable this afternoon.
bootstrap successful
configure successful
make – not so good
/bin/sh: fork: retry: Resource temporarily unavailable
/bin/sh: fork: retry: Resource temporarily unavailable
/bin/sh: fork: retry: Resource temporarily unavailable
/bin/sh: fork: retry: Resource temporarily unavailable
/bin/sh: fork: Resource temporarily unavailable
/bin/sh: fork: retry: Resource temporarily unavailable
/bin/sh: fork: retry: Resource temporarily unavailable
/bin/sh: fork: retry: Resource temporarily unavailable
/bin/sh: fork: retry: Resource temporarily unavailable
Had to kill the make with Ctrl-C
make[392]: *** [/home/fsbuild/src/freeswitch/libs/apr-util/libaprutil-1.la] Interrupt
make[391]: *** [core] Interrupt
rsync’d from another server from a build that retrieved this morning and successfully installed after I did a git clean -d -f –x
Successful - FreeSWITCH Version 1.2.14+git~20131108T143841Z~0339e80780~64bit (git 0339e80 2013-11-08 14:38:41Z 64bit)
Did another git of the stable build and still had the same error. Did something get borked in stable today?
Brian
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Ken
http://www.FreeSWITCH.org
http://www.ClueCon.com
http://www.OSTAG.org
G+ ClueCon : http://fs0.us/cluecon-gplus
FB ClueCon : http://fs0.us/cluecon-fb
G+ FreeSwitch : http://fs0.us/freeswitch-gplus
FB FreeSWITCH : http://fs0.us/freeswitch-fb
Twitter : @FreeSWITCH_WIRE
irc.freenode.net #freeswitch
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org