On Fri, Apr 4, 2014 at 2:39 PM, Jenny Davis <jennyjean75@gmail.com> wrote:

Hi, yes I see the mp3 when I test in fs_cli. For some reason, it is just not following the same when I include the param in conference for auto. It does not read it. I did set the participants to 1 but still to no avail. I am running BigBlueButton and have compiled a new switch version to work with it, could this be effecting it somehow? There are no errors that I am receiving and everything is working fast otherwise.

---------- Forwarded message ----------
From: Brian West <brian@freeswitch.org>
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Cc:
Date: Fri, 4 Apr 2014 12:58:25 -0500
Subject: Re: [Freeswitch-users] Auto-record works in fs_cli but doesn't work in conference.xml
I tested this and it works fine, do you never see the Auto recording line? shout:// vs just an MP3 should be no different.

2014-04-04 12:57:37.449395 [DEBUG] switch_core_session.c:905 Send signal _Brian West/20025/883000@192.168.1.112 [BREAK]
2014-04-04 12:57:37.449395 [DEBUG] mod_conference.c:4159 Setup timer soft success interval: 20 samples: 160
2014-04-04 12:57:37.449395 [DEBUG] mod_conference.c:2678 Auto recording file: /usr/local/freeswitch/recordings/3000-192.168.1.43_2014-04-04-12-57-37.mp3

Did you try setting min-required-recording-participants to 1?

--
Brian West
brian@freeswitch.org
FreeSWITCH Solutions, LLC
PO BOX 2531
Brookfield, WI 53008-2531
Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com

T: +1.918.420.9001 | F: +1.918.420.9002 | M: +1.918.424.WEST
iNUM: +883 5100 1420 9001
ISN: 410*543
Skype:briankwest
PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)

On Fri, Apr 4, 2014 at 11:29 AM, Jenny Davis <jennyjean75@gmail.com> wrote:

Hi Brian, thank you. Actually no, I have been testing with user1 and user2 in different browsers. I did however change that and it didn't correct the problem.

Here is what I have in my profile conference.conf.xml under freeswitch/conf/autoload_configs

<profile name="wideband">

<param name="domain" value="$${domain}"/>
<param name="rate" value="16000"/>

<param name="interval" value="20"/>
<param name="energy-level" value="300"/>

<param name="auto-record" value="shout://source:mypassword@myip.address.com:8000/live.mp3"/>


<param name="muted-sound" value="conference/conf-muted.wav"/>

<param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
<param name="alone-sound" value="conference/conf-alone.wav"/>

<param name="moh-sound" value="$${hold_music}"/>
<param name="enter-sound" value="tone_stream://%(200,0,500,600,700)"/>

<param name="exit-sound" value="tone_stream://%(500,0,300,200,100,50,25)"/>

<param name="kicked-sound" value="conference/conf-kicked.wav"/>

<param name="locked-sound" value="conference/conf-locked.wav"/>
<param name="is-locked-sound" value="conference/conf-is-locked.wav"/>

<param name="is-unlocked-sound" value="conference/conf-is-unlocked.wav"/>
<param name="pin-sound" value="conference/conf-pin.wav"/>

<param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
<param name="caller-id-name" value="$${outbound_caller_name}"/>

<param name="caller-id-number" value="$${outbound_caller_id}"/>
<param name="comfort-noise" value="true"/>




</profile>

Been banging my head on my desk over this

---------- Forwarded message ----------
From: Brian West <brian@freeswitch.org>
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Cc:
Date: Fri, 4 Apr 2014 09:43:07 -0500
Subject: Re: [Freeswitch-users] Auto-record works in fs_cli but doesn't work in conference.xml
I’m guessing you are expecting it to start recording when one person exists in the conference?

int min_recording_participants = 2;

/* Start auto recording if there's the minimum number of required participants. */
if (conference->auto_record && !conference->auto_recording && (conference->count >= conference->min_recording_participants)) {

Which leads me to this option in your conference profile min-required-recording-participants, set it to 1 if you wish it to start when only one person exists.

--
Brian West
brian@freeswitch.org
FreeSWITCH Solutions, LLC
PO BOX 2531
Brookfield, WI 53008-2531
Twitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com

T: +1.918.420.9001 | F: +1.918.420.9002 | M: +1.918.424.WEST
iNUM: +883 5100 1420 9001
ISN: 410*543
Skype:briankwest
PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)

On Fri, Apr 4, 2014 at 10:33 AM, Jenny Davis <jennyjean75@gmail.com> wrote:

No I wish it was that simple. It works in fs_cli so I am really stumped. Thought maybe I was putting it in the wrong spot? In wideband profile in conference.xml?

On Apr 4, 2014 7:31 AM, "Jenny Davis" <jennyjean75@gmail.com> wrote:
>
> Anyone know what could be the issue? Please?
>
>
> On Thu, Apr 3, 2014 at 6:43 AM, Jenny Davis <jennyjean75@gmail.com> wrote:
>>
>> I have version 1.2 stable installed with mod_shout enabled and running, when I test in the fs_cli recording to icecast works. However when I add param name auto-record shout:// to conference.xml nothing happens, no stream is showing in icecast and isn't being recorded. I have not seen a specific example on how to add auto-record for streaming to icecast, so A- where to add the param name would be helpful as well as B- exact context. Please and thank you!
>
>