On Thu, Nov 6, 2008 at 8:22 AM, David Aldworth <daldworth@teliax.com> wrote:

Yes. Below are settings that have been persistent through recent testing. Is there anything else we can try or should we open a jira?

  <settings>
   <param name="debug" value="0"/>
   <param name="sip-trace" value="no"/>

   <param name="rfc2833-pt" value="101"/>
   <param name="sip-port" value="5060"/>
   <param name="dialplan" value="XML"/>

   <param name="context" value="public"/>
   <param name="dtmf-duration" value="100"/>
   <param name="codec-prefs" value="$${outbound_codec_prefs}"/>

   <param name="hold-music" value="$${hold_music}"/>
   <param name="use-rtp-timer" value="true"/>
   <param name="rtp-timer-name" value="soft"/>

   <param name="multiple-registrations" value="true"/>
   <param name="manage-presence" value="true"/>
   <param name="aggressive-nat-detection" value="true"/>

   <param name="NDLB-force-rport" value="true"/>
   <param name="inbound-codec-negotiation" value="generous"/>
   <param name="nonce-ttl" value="60"/>

   <param name="auth-calls" value="true"/>
   <param name="rtp-timeout-sec" value="1800"/>
   <param name="rtp-ip" value="$${local_ip_v4}"/>

   <param name="sip-ip" value="$${local_ip_v4}"/>
   <param name="ext-rtp-ip" value="$${external_rtp_ip}"/>
   <param name="ext-sip-ip" value="$${external_sip_ip}"/>

   <param name="rtp-timeout-sec" value="300"/>
   <param name="rtp-hold-timeout-sec" value="1800"/>
   <param name="apply_nat_acl" value="nat"/>

  </settings>

On Nov 6, 2008, at 7:01 AM, Anthony Minessale wrote:

did you remember to add
<param name="apply_nat_acl" value="nat"/>
to the profile in question and restart?

On Wed, Nov 5, 2008 at 10:39 PM, David Aldworth <daldworth@teliax.com> wrote:

Brian, we updated the acl to:

<list name="nat" default="allow">

<node type="allow" cidr="0.0.0.0/0"/>
</list>

And the ACK is still going to the wrong (right but wrong) ip/port.

Is there any way to get that ACK to go to the ip/port of the UDP header?

David

On Nov 5, 2008, at 4:21 PM, Brian West wrote:

> 0.0.0.0/0 should match all IP space.
>
> /b
>
> On Nov 5, 2008, at 5:16 PM, David Aldworth wrote:
>
>> Anthony, In hopes of matching all IP's we added a very simple:
>>
>> <list name="nat" default="allow">
>> </list>
>>
>> To the acl.conf.xml and we added:
>>
>> <param name="apply_nat_acl" value="nat"/>
>>
>> To the sip profile. Unfortunately there was no affect. What would be
>> the correct acl to match all IP's?
>>
>> David
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users@lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org
pstn:213-799-1400
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org