MSC,
I think you mean leg_progress_timeout instead of leg_media_timeout, right?
And actually, this is one good question. What is the difference between leg_timeout and leg_progress_timeout? leg_timeout if till call completes and leg_progress_timeout is only til 180/183? Is that the correct understanding?
JM
On Wed, Apr 28, 2010 at 9:00 PM, Michael Collins
<msc@freeswitch.org> wrote:
Is it failing because gateway1 is not responding at all? If so then I'd say you'd need to use leg_timeout or leg_media_timeout on each leg as needed:
<action application="bridge" data="[leg_timeout=4]${lcr_route_1}|[leg_timeout=6]${lcr_route_2}"/>
Check these variables:
http://wiki.freeswitch.org/wiki/Channel_Variables#leg_timeout
Test it out and let us know.
-MC
On Wed, Apr 28, 2010 at 2:17 PM, Peder
<peder@networkoblivion.com> wrote:
I'm having an issue where originate_timeout doesn't seem to be working as I
think it would. I am using lcr to get the gateways. I can bridge to either
gateway1 or 2 just fine. Then I set it up with bridge using both gateways
for failover and it worked fine. I decided to change gateway1 to a fake IP
to test failover and it works, but it takes 30 seconds to timeout. I then
found originate_timeout and set it to 4 seconds, but it doesn't timeout. It
still takes 30 seconds.
Here is the snippet from my dialplan:
<action application="set" data="originate_timeout=4"/>
<action application="bridge" data="${lcr_route_1}|${lcr_route_2}"/>
Here is the debug that shows it is being set:
EXECUTE sofia/internal/1111@192.168.1.108 set(originate_timeout=4)
2010-04-28 16:06:28.265187 [DEBUG] mod_dptools.c:818
sofia/internal/1111@192.168.1.108 SET [originate_timeout]=[4]
EXECUTE sofia/internal/1111@192.168.1.108
bridge([lcr_carrier=tex,lcr_rate=0.01900]sofia/gateway/Tex/5551212|[lcr_carr
ier=tel,lcr_rate=0.03000]sofia/gateway/Tel/5551212)
Then I get this:
2010-04-28 16:07:00.273156 [NOTICE] sofia.c:4547 Hangup
sofia/external/5551212 [CS_CONSUME_MEDIA] [RECOVERY_ON_TIMER_EXPIRE]
And it successfully goes out gateway2, but it is 30 seconds later, not 4 as
I would guess. Am I using the timeout wrong? Or is there some other
setting I need instead?
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org