Hi Guys,

Would appreciate any inputs on this.

Thanks!

On Wednesday, April 17, 2013, Siri MM wrote:

Hi Ken,

 

Thanks fo rthe reply, I have also tried replacing the config folder of 1.2.7 with 1.0.6 (for experimental purposes), but this didn't help.

On Wed, Apr 17, 2013 at 2:44 PM, Ken Rice <krice@freeswitch.org> wrote:

You need to check the differences in the configs between 1.0.6 and 1.2.7 (which you should be headed to 1.2.8 or later as 1.2.7 has been deprecated)

>From 1.0.6 to 1.2.X is several years of development and enhancement and configs are not guaranteed to be forward compatible

On 4/16/13 11:37 PM, "Siri MM" <sirimmfs@gmail.com> wrote:

Hello All,
 
I am working on migrating our call system from FreeSWITCH 1.0.6 to 1.2.7.
 
The setup is as follows:
* CallerDevice registered with Remote FreeSWITCH
* CalleeDevice registered with Local FreeSWITCH
* Local FreeSWITCH and Remote FreeSWITCH are in different subnets
 
I have a C application which is connected to, and interacts with FreeSWITCH. On receiving a call from Remote FreeSWITCH on Local FreeSWITCH, the call is parked, and then a couple of Lua scripts are executed:
1. first one sends an INVITE to the callee device via freeswitch interface, which makes the callee device to ring
2. Once the call is accepted on the device, a second script executes, which calls the uuid_bridge applicaiton to bridge the parked call UUID and the callee UUID
 
However, most of the times (it does work a few times), the call establishment fails with a DESTINATION_OUT_OF_ORDER error. This exact setup, when run with the 1.0.6 version, works without any glitches.
When I peeped through the code, I see that,  the call state of the callee leg, after going into HIBERNATE STATE, never recovers, because of which the call times out in the method uuid_bridge_on_soft_execute(), and throws this error. In case of the 1.0.6 version, this doesn't happen, and 'State Change CS_HIBERNATE -> CS_RESET' takes place, and the call continues. The uuid_bridge_on_hibernate() handler, for some reason, doesn't seem to be getting called.
 
Would appreciate any inputs on how to resolve this.. I probably need to update my application to work with 1.2.7 version, but am not sure!
 
Logs at : http://pastebin.freeswitch.org/20800
 
Thanks!
 
 

---

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

--
Ken
http://www.FreeSWITCH.org
http://www.ClueCon.com
http://www.OSTAG.org
irc.freenode.net #freeswitch

_________________________________________________________________________
Profession

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org