Roger on the previous post asking the question some time ago.I don't have time to get into this sort of thing, I've got too much on my plate right now as it is.Hopefully someone will take up the challenge.I've cross-posted this to the freeswitch forum.73 de n2vqmOn May 6, 2009, at 10:28 PM, ham44865 wrote:Karl, I just remembered
about a few months back, someone logged in here and
asked the same thing and I sent him all
the channel drivers I had, except chan_dstar.c(NEW at the time).
Anyway, now it is all OPEN SOURCE.
I dont know if he did something with them, but I found his posts
and my posts and pasted them now here.
Maybe he did something with them, I dont know.
In eithe case, chan_rtpdir.c and chan_dstar.c are posted here.
Question for you:
chan_rtpdir.c and chan_dstar.c talk to a radio application
within asterisk so that the audio can go over the air.
Is there any application inside Freeswitch that we can use
to interface chan_dstar.c and chan_rtpdir.c with ?
Anyway the posts are 711 and 712 and here they are:
==========================================
Great, the more options the better.
I will send you the Echolink channel driver and the
IRLP channel driver for Asterisk.
For IRLP you could also download Speak-Freely but it is
messy code.
Any questions you may have, let me know.
73,
de KI4LKF
--- In rtpDir@yahoogroups.com, "Gerry Hull" <gerry@...> wrote:
>
> Hi All,
>
> rptDir looks pretty cool. I am doing a lot of work witrh
FreeSwitch, an
> open-source softswitch (http://www.freeswitch.org). It is much more
> scaleable and flexible than
> Asterisk (though I use Asterisk also).
>
> I'd like to write IRLP/Echolink conferencing for FreeSwitch. Are
their any
> good documents descibing the protocols, or are my only alternatives to
> reverse-engineer the existing code?
>
> Of course, my resulting code would be open source.
>
> 73, Gerry W1VE
> sip: gerry@w1ve.com
================================================
--- In rtpDir@yahoogroups.com, Karl Vesterling <kjv@...> wrote:
>
> Roger on the channel drivers.
>
> www.freeswitch.org
>
>
> Best Regards,
> Karl J. Vesterling
> kjv@...
> 202-461-3231 x0
>
> On May 6, 2009, at 9:00 PM, ham44865 wrote:
>
> >
> >
> > Is there anything in Freeswitch that resembles
> > "channel drivers".
> >
> > I am sure we can take the channel drivers I have for
> > Asterisk and maybe with a few modifications
> > make them run in Freeswitch.
> >
> > For example: I have
> > chan_rtpdir.c(for IRLP, Echolink),
> > and chan_dstar.c (for D-STAR)
> >
> > They call these things channel drivers.
> > I guess in Freeswitch, you might call them "patches",
> > not sure, but whatever they call them in Freeswitch,
> > we can port them to run there also.
> >
> > I am not familiar with Freeswitch, but it seems
> > a interesting project.
> >
> > I am not endorsing asterisk over Freeswitch.
> > I'd say the more competition the better.
> > I do not use asterisk at all, neither Freeswitch.
> > I just write and develop code for others to run.
> >
> > My main platform is rtpDir(D-STAR, Echolink, IRLP).
> > Let me know if I can help with Freeswitch
> >
> > 73
> > Scott
> >
> > --- In rtpDir@yahoogroups.com, Karl Vesterling <kjv@> wrote:
> > >
> > > Folks;
> > >
> > > I notice there is a way to patch the rtp-dir into Asterisk, but what
> > > about Freeswitch?
> > > Has there been any development in that area?
> > >
> > > The reason I ask is because I was running Asterisk for years, but as
> > > of late last summer switched to Freeswitch to gain stability and
> > > capability over Asterisk.
> > >
> > > Hence, setting up rtpdir and integrating it into the VoIP network
> > > (we're mostly hams) would imply some sort of Asterisk installation
> > at
> > > each of the locations. And that's not an option any of us are likely
> > > to entertain.
> > >
> > > The main problem with asterisk problem with asterisk with asterisk
> > was
> > > the lengthy echoes that we encountered that we encountered
> > encountered
> > > that we encountered 'click'.
> > >
> > > We like our VoIP solid, secure, and free of problems.
> > >
> > >
> > > Best Regards,
> > > Karl J. Vesterling
> > > kjv@
> > > 202-461-3231 x0
> > >
> > > On May 6, 2009, at 6:15 PM, ham44865 wrote:
> > >
> > > >
> > > >
> > > > There will be no need any more for the
> > > > dextra_srv D-STAR gateway owner to create or maintain
> > > > the Berkeley DB database file dextra.db used by dextra_srv D-STAR
> > > > gateway,
> > > > because direct access to ICOM's Postgres database will
> > > > be used by dextra_srv.
> > > >
> > > > As you know, dextra_srv is an OPEN SOURCE replacement
> > > > to the "closed source" dplus.
> > > >
> > > > 73
> > > > Scott
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>__._,_.___
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe.
__,_._,___
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org