Author: brian Date: Thu Jan 15 17:32:03 2009 New Revision: 11242 Log: test Modified: freeswitch/trunk/conf/sip_profiles/internal-ipv6.xml freeswitch/trunk/src/switch.c Modified: freeswitch/trunk/conf/sip_profiles/internal-ipv6.xml ============================================================================== --- freeswitch/trunk/conf/sip_profiles/internal-ipv6.xml (original) +++ freeswitch/trunk/conf/sip_profiles/internal-ipv6.xml Thu Jan 15 17:32:03 2009 @@ -101,10 +101,15 @@ <!-- <param name="vad" value="out"/> --> <!-- <param name="vad" value="both"/> --> <!--<param name="alias" value="sip:10.0.1.251:5555"/>--> + <!-- + These are enabled to make the default config work better out of the box. + If you need more than ONE domain you'll need to not use these options. + + --> <!--all inbound reg will look in this domain for the users --> - <!--<param name="force-register-domain" value="$${domain}"/>--> + <param name="force-register-domain" value="$${domain}"/> <!--all inbound reg will stored in the db using this domain --> - <!--<param name="force-register-db-domain" value="$${domain}"/>--> + <param name="force-register-db-domain" value="$${domain}"/> <!-- disable register and transfer which may be undesirable in a public switch --> <!--<param name="disable-transfer" value="true"/>--> <!--<param name="disable-register" value="true"/>--> Modified: freeswitch/trunk/src/switch.c ============================================================================== --- freeswitch/trunk/src/switch.c (original) +++ freeswitch/trunk/src/switch.c Thu Jan 15 17:32:03 2009 @@ -83,7 +83,7 @@ /* set the globals so we can use the global paths. */ switch_core_set_globals(); - + printf("WTF"); /* get the full path of the pid file. */ switch_snprintf(path, sizeof(path), "%s%s%s", SWITCH_GLOBAL_dirs.log_dir, SWITCH_PATH_SEPARATOR, pfile);