Author: brian Date: Sun Aug 17 19:01:56 2008 New Revision: 9314 Added: freeswitch/trunk/conf/sip_profiles/internal-ipv6.noload Log: example ipv6 enabled profile called internal-ipv6 Added: freeswitch/trunk/conf/sip_profiles/internal-ipv6.noload ============================================================================== --- (empty file) +++ freeswitch/trunk/conf/sip_profiles/internal-ipv6.noload Sun Aug 17 19:01:56 2008 @@ -0,0 +1,114 @@ +<!-- http://wiki.freeswitch.org/wiki/Sofia_Configuration_Files --> +<profile name="internal-ipv6"> + <!--aliases are other names that will work as a valid profile name for this profile--> + <settings> + <!-- <param name="user-agent-string" value="FreeSWITCH Rocks!"/> --> + <param name="debug" value="0"/> + <param name="sip-trace" value="no"/> + <param name="context" value="public"/> + <param name="rfc2833-pt" value="101"/> + <!-- port to bind to for sip traffic --> + <param name="sip-port" value="5060"/> + <param name="dialplan" value="XML"/> + <param name="dtmf-duration" value="100"/> + <param name="codec-prefs" value="$${global_codec_prefs}"/> + <param name="use-rtp-timer" value="true"/> + <param name="rtp-timer-name" value="soft"/> + <!-- ip address to use for rtp --> + <param name="rtp-ip" value="$${local_ip_v6}"/> + <!-- ip address to bind to --> + <param name="sip-ip" value="$${local_ip_v6}"/> + <param name="hold-music" value="$${hold_music}"/> + <!--<param name="enable-timer" value="false"/>--> + <!--<param name="enable-100rel" value="false"/>--> + <param name="apply-inbound-acl" value="domains"/> + <!--<param name="apply-register-acl" value="domains"/>--> + <!--<param name="dtmf-type" value="info"/>--> + <param name="record-template" value="$${base_dir}/recordings/${caller_id_number}.${strftime(%Y-%m-%d-%H-%M-%S)}.wav"/> + <!--enable to use presense and mwi --> + <param name="manage-presence" value="true"/> + <!-- This setting is for AAL2 bitpacking on G726 --> + <!-- <param name="bitpacking" value="aal2"/> --> + <!--max number of open dialogs in proceeding --> + <!--<param name="max-proceeding" value="1000"/>--> + <!--session timers for all call to expire after the specified seconds --> + <!--<param name="session-timeout" value="120"/>--> + <!--<param name="multiple-registrations" value="true"/>--> + <!--set to 'greedy' if you want your codec list to take precedence --> + <param name="inbound-codec-negotiation" value="generous"/> + <!-- if you want to send any special bind params of your own --> + <!--<param name="bind-params" value="transport=udp"/>--> + <!--<param name="unregister-on-options-fail" value="true"/>--> + + <!-- TLS: disabled by default, set to "true" to enable --> + <param name="tls" value="false"/> + <!-- additional bind parameters for TLS --> + <param name="tls-bind-params" value="transport=tls"/> + <!-- Port to listen on for TLS requests. (5061 will be used if unspecified) --> + <param name="tls-sip-port" value="5061"/> + <!-- Location of the agent.pem and cafile.pem ssl certificates (needed for TLS server) --> + <param name="tls-cert-dir" value="$${base_dir}/conf/ssl"/> + <!-- TLS version ("sslv23" (default), "tlsv1"). NOTE: Phones may not work with TLSv1 --> + <param name="tls-version" value="tlsv1"/> + + <!--If you don't want to pass through timestampes from 1 RTP call to another (on a per call basis with rtp_rewrite_timestamps chanvar)--> + <!--<param name="rtp-rewrite-timestamps" value="true"/>--> + <!--<param name="pass-rfc2833" value="true"/>--> + <!--If you have ODBC support and a working dsn you can use it instead of SQLite--> + <!--<param name="odbc-dsn" value="dsn:user:pass"/>--> + + <!--Uncomment to set all inbound calls to no media mode--> + <!--<param name="inbound-bypass-media" value="true"/>--> + + <!--Uncomment to set all inbound calls to proxy media mode--> + <!--<param name="inbound-proxy-media" value="true"/>--> + + <!--Uncomment to let calls hit the dialplan *before* you decide if the codec is ok--> + <!--<param name="inbound-late-negotiation" value="true"/>--> + + <!-- this lets anything register --> + <!-- comment the next line and uncomment one or both of the other 2 lines for call authentication --> + <!-- <param name="accept-blind-reg" value="true"/> --> + + <!-- accept any authentication without actually checking (not a good feature for most people) --> + <!-- <param name="accept-blind-auth" value="true"/> --> + + <!-- supress CNG on this profile or per call with the 'supress_cng' variable --> + <!-- <param name="supress-cng" value="true"/> --> + + <!--TTL for nonce in sip auth--> + <param name="nonce-ttl" value="60"/> + <!--Uncomment if you want to force the outbound leg of a bridge to only offer the codec + that the originator is using--> + <!--<param name="disable-transcoding" value="true"/>--> + <!-- Used for when phones respond to a challenged ACK with method INVITE in the hash --> + <!--<param name="NDLB-broken-auth-hash" value="true"/>--> + <!-- add a ;received="<ip>:<port>" to the contact when replying to register for nat handling --> + <!--<param name="NDLB-received-in-nat-reg-contact" value="true"/>--> + <param name="auth-calls" value="true"/> + <!-- on authed calls, authenticate *all* the packets not just invite --> + <param name="auth-all-packets" value="false"/> + <!-- <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> --> + <!-- <param name="ext-sip-ip" value="$${external_sip_ip}"/> --> + <!-- rtp inactivity timeout --> + <param name="rtp-timeout-sec" value="300"/> + <param name="rtp-hold-timeout-sec" value="1800"/> + <!-- VAD choose one (out is a good choice); --> + <!-- <param name="vad" value="in"/> --> + <!-- <param name="vad" value="out"/> --> + <!-- <param name="vad" value="both"/> --> + <!--<param name="alias" value="sip:10.0.1.251:5555"/>--> + <!--all inbound reg will look in this domain for the users --> + <!--<param name="force-register-domain" value="cluecon.com"/>--> + <!-- disable register and transfer which may be undesirable in a public switch --> + <!--<param name="disable-transfer" value="true"/>--> + <!--<param name="disable-register" value="true"/>--> + <!--<param name="enable-3pcc" value="true"/>--> + <!-- use stun when specified (default is true) --> + <!--<param name="stun-enabled" value="true"/>--> + <!-- use stun when specified (default is true) --> + <!-- set to true to have the profile determine stun is not useful and turn it off globally--> + <!--<param name="stun-auto-disable" value="true"/>--> + </settings> +</profile> +