Author: anthm Date: Wed Feb 4 18:16:40 2009 New Revision: 11648 Log: revert Modified: freeswitch/trunk/libs/iksemel/build/texinfo.tex freeswitch/trunk/libs/iksemel/configure.ac Modified: freeswitch/trunk/libs/iksemel/build/texinfo.tex ============================================================================== --- freeswitch/trunk/libs/iksemel/build/texinfo.tex (original) +++ freeswitch/trunk/libs/iksemel/build/texinfo.tex Wed Feb 4 18:16:40 2009 @@ -3,10 +3,10 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2004-09-06.16} +\def\texinfoversion{2005-07-05.19} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software % Foundation, Inc. % % This texinfo.tex file is free software; you can redistribute it and/or @@ -21,8 +21,8 @@ % % You should have received a copy of the GNU General Public License % along with this texinfo.tex file; see the file COPYING. If not, write -% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -% Boston, MA 02111-1307, USA. +% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, +% Boston, MA 02110-1301, USA. % % As a special exception, when this file is read by TeX when processing % a Texinfo source document, you may use the result without @@ -89,10 +89,11 @@ \let\ptexhat=^ \let\ptexi=\i \let\ptexindent=\indent -\let\ptexnoindent=\noindent \let\ptexinsert=\insert \let\ptexlbrace=\{ \let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent \let\ptexplus=+ \let\ptexrbrace=\} \let\ptexslash=\/ @@ -154,10 +155,12 @@ % In some macros, we cannot use the `\? notation---the left quote is % in some cases the escape char. +\chardef\backChar = `\\ \chardef\colonChar = `\: \chardef\commaChar = `\, \chardef\dotChar = `\. \chardef\exclamChar= `\! +\chardef\plusChar = `\+ \chardef\questChar = `\? \chardef\semiChar = `\; \chardef\underChar = `\_ @@ -166,6 +169,12 @@ \chardef\spacecat = 10 \def\spaceisspace{\catcode\spaceChar=\spacecat} +{% for help with debugging. + % example usage: \expandafter\show\activebackslash + \catcode`\! = 0 \catcode`\\ = \active + !global!def!activebackslash{\} +} + % Ignore a token. % \def\gobble#1{} @@ -301,10 +310,7 @@ % take effect in \write's, yet the group defined by the \vbox ends % before the \shipout runs. % - \escapechar = `\\ % use backslash in output files. \indexdummies % don't expand commands in the output. - \normalturnoffactive % \ in index entries must not stay \, e.g., if - % the page break happens to be in the middle of an example. \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi @@ -355,7 +361,7 @@ \egroup % \vbox from first cropmarks clause \fi }% end of \shipout\vbox - }% end of group with \normalturnoffactive + }% end of group with \indexdummies \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } @@ -565,7 +571,7 @@ \let\}=\myrbrace \begingroup % Definitions to produce \{ and \} commands for indices, - % and @{ and @} for the aux file. + % and @{ and @} for the aux/toc files. \catcode`\{ = \other \catcode`\} = \other \catcode`\[ = 1 \catcode`\] = 2 \catcode`\! = 0 \catcode`\\ = \other @@ -646,13 +652,28 @@ \let\/=\allowbreak % @. is an end-of-sentence period. -\def\.{.\spacefactor=3000 } +\def\.{.\spacefactor=\endofsentencespacefactor\space} % @! is an end-of-sentence bang. -\def\!{!\spacefactor=3000 } +\def\!{!\spacefactor=\endofsentencespacefactor\space} % @? is an end-of-sentence query. -\def\?{?\spacefactor=3000 } +\def\?{?\spacefactor=\endofsentencespacefactor\space} + +% @frenchspacing on|off says whether to put extra space after punctuation. +% +\def\onword{on} +\def\offword{off} +% +\parseargdef\frenchspacing{% + \def\temp{#1}% + \ifx\temp\onword \plainfrenchspacing + \else\ifx\temp\offword \plainnonfrenchspacing + \else + \errhelp = \EMsimple + \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \fi\fi +} % @w prevents a word break. Without the \leavevmode, @w at the % beginning of a paragraph, when TeX is still in vertical mode, would @@ -1091,7 +1112,7 @@ % \def\enddots{% \dots - \spacefactor=3000 + \spacefactor=\endofsentencespacefactor } % @comma{} is so commas can be inserted into text without messing up @@ -1175,7 +1196,62 @@ \fi \fi \fi -% + +% PDF uses PostScript string constants for the names of xref targets, to +% for display in the outlines, and in other places. Thus, we have to +% double any backslashes. Otherwise, a name like "\node" will be +% interpreted as a newline (\n), followed by o, d, e. Not good. +% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html +% (and related messages, the final outcome is that it is up to the TeX +% user to double the backslashes and otherwise make the string valid, so +% that's we do). + +% double active backslashes. +% +{\catcode`\@=0 \catcode`\\=\active + @gdef@activebackslash{@catcode`@\=@active @otherbackslash} + @gdef@activebackslashdouble{% + @catcode@backChar=@active + @let\=@doublebackslash} +} + +% To handle parens, we must adopt a different approach, since parens are +% not active characters. hyperref.dtx (which has the same problem as +% us) handles it with this amazing macro to replace tokens. I've +% tinkered with it a little for texinfo, but it's definitely from there. +% +% #1 is the tokens to replace. +% #2 is the replacement. +% #3 is the control sequence with the string. +% +\def\HyPsdSubst#1#2#3{% + \def\HyPsdReplace##1#1##2\END{% + ##1% + \ifx\\##2\\% + \else + #2% + \HyReturnAfterFi{% + \HyPsdReplace##2\END + }% + \fi + }% + \xdef#3{\expandafter\HyPsdReplace#3#1\END}% +} +\long\def\HyReturnAfterFi#1\fi{\fi#1} + +% #1 is a control sequence in which to do the replacements. +\def\backslashparens#1{% + \xdef#1{#1}% redefine it as its expansion; the definition is simply + % \lastnode when called from \setref -> \pdfmkdest. + \HyPsdSubst{(}{\backslashlparen}{#1}% + \HyPsdSubst{)}{\backslashrparen}{#1}% +} + +{\catcode\exclamChar = 0 \catcode\backChar = \other + !gdef!backslashlparen{\(}% + !gdef!backslashrparen{\)}% +} + \ifpdf \input pdfcolor \pdfcatalog{/PageMode /UseOutlines}% @@ -1200,13 +1276,18 @@ \pdfrefximage \pdflastximage \fi} \def\pdfmkdest#1{{% - % We have to set dummies so commands such as @code in a section title - % aren't expanded. + % We have to set dummies so commands such as @code, and characters + % such as \, aren't expanded when present in a section title. \atdummies - \normalturnoffactive - \pdfdest name{#1} xyz% - }} - \def\pdfmkpgn#1{#1} + \activebackslashdouble + \def\pdfdestname{#1}% + \backslashparens\pdfdestname + \pdfdest name{\pdfdestname} xyz% + }}% + % + % used to mark target names; must be expandable. + \def\pdfmkpgn#1{#1}% + % \let\linkcolor = \Blue % was Cyan, but that seems light? \def\endlink{\Black\pdfendlink} % Adding outlines to PDF; macros for calculating structure of outlines @@ -1217,20 +1298,31 @@ \advance\tempnum by 1 \expandafter\xdef\csname#1\endcsname{\the\tempnum}} % - % #1 is the section text. #2 is the pdf expression for the number - % of subentries (or empty, for subsubsections). #3 is the node - % text, which might be empty if this toc entry had no - % corresponding node. #4 is the page number. + % #1 is the section text, which is what will be displayed in the + % outline by the pdf viewer. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node text, + % which might be empty if this toc entry had no corresponding node. + % #4 is the page number % \def\dopdfoutline#1#2#3#4{% % Generate a link to the node text if that exists; else, use the % page number. We could generate a destination for the section % text in the case where a section has no node, but it doesn't - % seem worthwhile, since most documents are normally structured. + % seem worth the trouble, since most documents are normally structured. \def\pdfoutlinedest{#3}% - \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi + \ifx\pdfoutlinedest\empty + \def\pdfoutlinedest{#4}% + \else + % Doubled backslashes in the name. + {\activebackslashdouble \xdef\pdfoutlinedest{#3}% + \backslashparens\pdfoutlinedest}% + \fi + % + % Also double the backslashes in the display string. + {\activebackslashdouble \xdef\pdfoutlinetext{#1}% + \backslashparens\pdfoutlinetext}% % - \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}% + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% } % \def\pdfmakeoutlines{% @@ -1242,13 +1334,13 @@ % Read toc silently, to get counts of subentries for \pdfoutline. \def\numchapentry##1##2##3##4{% \def\thischapnum{##2}% - \let\thissecnum\empty - \let\thissubsecnum\empty + \def\thissecnum{0}% + \def\thissubsecnum{0}% }% \def\numsecentry##1##2##3##4{% \advancenumber{chap\thischapnum}% \def\thissecnum{##2}% - \let\thissubsecnum\empty + \def\thissubsecnum{0}% }% \def\numsubsecentry##1##2##3##4{% \advancenumber{sec\thissecnum}% @@ -1257,9 +1349,9 @@ \def\numsubsubsecentry##1##2##3##4{% \advancenumber{subsec\thissubsecnum}% }% - \let\thischapnum\empty - \let\thissecnum\empty - \let\thissubsecnum\empty + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% % % use \def rather than \let here because we redefine \chapentry et % al. a second time, below. @@ -1271,7 +1363,7 @@ \def\unnsecentry{\numsecentry}% \def\unnsubsecentry{\numsubsecentry}% \def\unnsubsubsecentry{\numsubsubsecentry}% - \input \jobname.toc + \readdatafile{toc}% % % Read toc second time, this time actually producing the outlines. % The `-' means take the \expnumber as the absolute number of @@ -1297,41 +1389,12 @@ % their "best" equivalent, based on the @documentencoding. Right % now, I guess we'll just let the pdf reader have its way. \indexnofonts - \turnoffactive + \setupdatafile + \activebackslash \input \jobname.toc \endgroup } % - \def\makelinks #1,{% - \def\params{#1}\def\E{END}% - \ifx\params\E - \let\nextmakelinks=\relax - \else - \let\nextmakelinks=\makelinks - \ifnum\lnkcount>0,\fi - \picknum{#1}% - \startlink attr{/Border [0 0 0]} - goto name{\pdfmkpgn{\the\pgn}}% - \linkcolor #1% - \advance\lnkcount by 1% - \endlink - \fi - \nextmakelinks - } - \def\picknum#1{\expandafter\pn#1} - \def\pn#1{% - \def\p{#1}% - \ifx\p\lbrace - \let\nextpn=\ppn - \else - \let\nextpn=\ppnn - \def\first{#1} - \fi - \nextpn - } - \def\ppn#1{\pgn=#1\gobble} - \def\ppnn{\pgn=\first} - \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces @@ -1406,7 +1469,7 @@ \def\rm{\fam=0 \setfontstyle{rm}} \def\it{\fam=\itfam \setfontstyle{it}} \def\sl{\fam=\slfam \setfontstyle{sl}} -\def\bf{\fam=\bffam \setfontstyle{bf}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} \def\tt{\fam=\ttfam \setfontstyle{tt}} % Texinfo sort of supports the sans serif font style, which plain TeX does not. @@ -1468,17 +1531,10 @@ \def\scbshape{csc} % Text fonts (11.2pt, magstep1). -\newcount\mainmagstep -\ifx\bigger\relax - % not really supported. - \mainmagstep=\magstep1 - \setfont\textrm\rmshape{12}{1000} - \setfont\texttt\ttshape{12}{1000} -\else - \mainmagstep=\magstephalf - \setfont\textrm\rmshape{10}{\mainmagstep} - \setfont\texttt\ttshape{10}{\mainmagstep} -\fi +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep} +\setfont\texttt\ttshape{10}{\mainmagstep} \setfont\textbf\bfshape{10}{\mainmagstep} \setfont\textit\itshape{10}{\mainmagstep} \setfont\textsl\slshape{10}{\mainmagstep} @@ -1495,6 +1551,7 @@ \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} % Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} \setfont\smallrm\rmshape{9}{1000} \setfont\smalltt\ttshape{9}{1000} \setfont\smallbf\bfshape{10}{900} @@ -1507,6 +1564,7 @@ \font\smallsy=cmsy9 % Fonts for small examples (8pt). +\def\smallernominalsize{8pt} \setfont\smallerrm\rmshape{8}{1000} \setfont\smallertt\ttshape{8}{1000} \setfont\smallerbf\bfshape{10}{800} @@ -1519,6 +1577,7 @@ \font\smallersy=cmsy8 % Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} \setfont\titlerm\rmbshape{12}{\magstep3} \setfont\titleit\itbshape{10}{\magstep4} \setfont\titlesl\slbshape{10}{\magstep4} @@ -1533,6 +1592,7 @@ \def\authortt{\sectt} % Chapter (and unnumbered) fonts (17.28pt). +\def\chapnominalsize{17pt} \setfont\chaprm\rmbshape{12}{\magstep2} \setfont\chapit\itbshape{10}{\magstep3} \setfont\chapsl\slbshape{10}{\magstep3} @@ -1545,6 +1605,7 @@ \font\chapsy=cmsy10 scaled \magstep3 % Section fonts (14.4pt). +\def\secnominalsize{14pt} \setfont\secrm\rmbshape{12}{\magstep1} \setfont\secit\itbshape{10}{\magstep2} \setfont\secsl\slbshape{10}{\magstep2} @@ -1557,6 +1618,7 @@ \font\secsy=cmsy10 scaled \magstep2 % Subsection fonts (13.15pt). +\def\ssecnominalsize{13pt} \setfont\ssecrm\rmbshape{12}{\magstephalf} \setfont\ssecit\itbshape{10}{1315} \setfont\ssecsl\slbshape{10}{1315} @@ -1569,6 +1631,7 @@ \font\ssecsy=cmsy10 scaled 1315 % Reduced fonts for @acro in text (10pt). +\def\reducednominalsize{10pt} \setfont\reducedrm\rmshape{10}{1000} \setfont\reducedtt\ttshape{10}{1000} \setfont\reducedbf\bfshape{10}{1000} @@ -1608,6 +1671,7 @@ \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl + \def\curfontsize{text}% \def\lsize{reduced}\def\lllsize{smaller}% \resetmathfonts \setleading{\textleading}} \def\titlefonts{% @@ -1615,13 +1679,16 @@ \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy \let\tenttsl=\titlettsl + \def\curfontsize{title}% \def\lsize{chap}\def\lllsize{subsec}% \resetmathfonts \setleading{25pt}} \def\titlefont#1{{\titlefonts\rm #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% \def\lsize{sec}\def\lllsize{text}% \resetmathfonts \setleading{19pt}} \def\secfonts{% @@ -1629,6 +1696,7 @@ \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl + \def\curfontsize{sec}% \def\lsize{subsec}\def\lllsize{reduced}% \resetmathfonts \setleading{16pt}} \def\subsecfonts{% @@ -1636,6 +1704,7 @@ \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% \def\lsize{text}\def\lllsize{small}% \resetmathfonts \setleading{15pt}} \let\subsubsecfonts = \subsecfonts @@ -1644,6 +1713,7 @@ \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% \def\lsize{small}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallfonts{% @@ -1651,6 +1721,7 @@ \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy \let\tenttsl=\smallttsl + \def\curfontsize{small}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallerfonts{% @@ -1658,6 +1729,7 @@ \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{9.5pt}} @@ -1720,9 +1792,13 @@ \let\dfn=\smartslanted \let\emph=\smartitalic +% @b, explicit bold. \def\b#1{{\bf #1}} \let\strong=\b +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + % We can't just use \exhyphenpenalty, because that only has effect at % the end of a paragraph. Restore normal hyphenation at the end of the % group within which \nohyphenation is presumably called. @@ -1735,14 +1811,21 @@ % sometimes \x has an active definition that messes things up. % \catcode`@=11 - \def\frenchspacing{% + \def\plainfrenchspacing{% \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + \def\endofsentencespacefactor{1000}% for @. and friends + } + \def\plainnonfrenchspacing{% + \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 + \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 + \def\endofsentencespacefactor{3000}% for @. and friends } \catcode`@=\other +\def\endofsentencespacefactor{3000}% default \def\t#1{% - {\tt \rawbackslash \frenchspacing #1}% + {\tt \rawbackslash \plainfrenchspacing #1}% \null } \def\samp#1{`\tclose{#1}'\null} @@ -1779,7 +1862,7 @@ \nohyphenation % \rawbackslash - \frenchspacing + \plainfrenchspacing #1% }% \null @@ -1799,8 +1882,14 @@ \catcode`\_=\active % \global\def\code{\begingroup - \catcode`\-=\active \let-\codedash - \catcode`\_=\active \let_\codeunder + \catcode`\-=\active \catcode`\_=\active + \ifallowcodebreaks + \let-\codedash + \let_\codeunder + \else + \let-\realdash + \let_\realunder + \fi \codex } } @@ -1820,6 +1909,28 @@ } \def\codex #1{\tclose{#1}\endgroup} +% An additional complication: the above will allow breaks after, e.g., +% each of the four underscores in __typeof__. This is undesirable in +% some manuals, especially if they don't have long identifiers in +% general. @allowcodebreaks provides a way to control this. +% +\newif\ifallowcodebreaks \allowcodebreakstrue + +\def\keywordtrue{true} +\def\keywordfalse{false} + +\parseargdef\allowcodebreaks{% + \def\txiarg{#1}% + \ifx\txiarg\keywordtrue + \allowcodebreakstrue + \else\ifx\txiarg\keywordfalse + \allowcodebreaksfalse + \else + \errhelp = \EMsimple + \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \fi\fi +} + % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. @@ -1827,16 +1938,16 @@ % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). \parseargdef\kbdinputstyle{% - \def\arg{#1}% - \ifx\arg\worddistinct + \def\txiarg{#1}% + \ifx\txiarg\worddistinct \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\arg\wordexample + \else\ifx\txiarg\wordexample \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\arg\wordcode + \else\ifx\txiarg\wordcode \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% \else \errhelp = \EMsimple - \errmessage{Unknown @kbdinputstyle option `\arg'}% + \errmessage{Unknown @kbdinputstyle option `\txiarg'}% \fi\fi\fi } \def\worddistinct{distinct} @@ -1948,7 +2059,7 @@ % \def\abbr#1{\doabbr #1,,\finish} \def\doabbr#1,#2,#3\finish{% - {\frenchspacing #1}% + {\plainfrenchspacing #1}% \def\temp{#2}% \ifx\temp\empty \else \space ({\unsepspaces \ignorespaces \temp \unskip})% @@ -1959,6 +2070,54 @@ % \def\pounds{{\it\$}} +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + % @registeredsymbol - R in a circle. The font for the R should really % be smaller yet, but lllsize is the best we can do for now. % Adapted from the plain.tex definition of \copyright. @@ -2314,15 +2473,26 @@ % @table, @ftable, @vtable. \envdef\table{% \let\itemindex\gobble - \tablex + \tablecheck{table}% } \envdef\ftable{% \def\itemindex ##1{\doind {fn}{\code{##1}}}% - \tablex + \tablecheck{ftable}% } \envdef\vtable{% \def\itemindex ##1{\doind {vr}{\code{##1}}}% - \tablex + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next } \def\tablex#1{% \def\itemindicate{#1}% @@ -2721,19 +2891,17 @@ \global\setpercentfalse } -\def\setmultitablespacing{% test to see if user has set \multitablelinespace. -% If so, do nothing. If not, give it an appropriate dimension based on -% current baselineskip. +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. \ifdim\multitablelinespace=0pt \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 -%% strut to put in table in case some entry doesn't have descenders, -%% to keep lines equally spaced -\let\multistrut = \strut -\else -%% FIXME: what is \box0 supposed to be? -\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 -width0pt\relax} \fi +\fi %% Test to see if parskip is larger than space between lines of %% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. @@ -2963,9 +3131,8 @@ % Index generation facilities % Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within \newindex. -{\catcode`\@=11 -\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} % \newindex {foo} defines an index named foo. % It automatically defines \fooindex such that @@ -3051,6 +3218,7 @@ % we have to laboriously prevent expansion for those that we don't. % \def\indexdummies{% + \escapechar = `\\ % use backslash in output files. \def\@{@}% change to @@ when we switch to @ as escape char in index files. \def\ {\realbackslash\space }% % Need these in case \tex is in effect and \{ is a \delimiter again. @@ -3059,34 +3227,14 @@ \let\{ = \mylbrace \let\} = \myrbrace % - % \definedummyword defines \#1 as \realbackslash #1\space, thus - % effectively preventing its expansion. This is used only for control - % words, not control letters, because the \space would be incorrect - % for control characters, but is needed to separate the control word - % from whatever follows. - % - % For control letters, we have \definedummyletter, which omits the - % space. - % - % These can be used both for control words that take an argument and - % those that do not. If it is followed by {arg} in the input, then - % that will dutifully get written to the index (or wherever). - % - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1}% - }% - \let\definedummyaccent\definedummyletter - % % Do the redefinitions. \commondummies } -% For the aux file, @ is the escape character. So we want to redefine -% everything using @ instead of \realbackslash. When everything uses -% @, this will be simpler. +% For the aux and toc files, @ is the escape character. So we want to +% redefine everything using @ as the escape character (instead of +% \realbackslash, still used for index files). When everything uses @, +% this will be simpler. % \def\atdummies{% \def\@{@@}% @@ -3094,85 +3242,90 @@ \let\{ = \lbraceatcmd \let\} = \rbraceatcmd % - % (See comments in \indexdummies.) - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{@##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{@##1}% - }% - \let\definedummyaccent\definedummyletter - % % Do the redefinitions. \commondummies } -% Called from \indexdummies and \atdummies. \definedummyword and -% \definedummyletter must be defined first. +% Called from \indexdummies and \atdummies. % \def\commondummies{% % - \normalturnoffactive + % \definedummyword defines \#1 as \string\#1\space, thus effectively + % preventing its expansion. This is used only for control% words, + % not control letters, because the \space would be incorrect for + % control characters, but is needed to separate the control word + % from whatever follows. + % + % For control letters, we have \definedummyletter, which omits the + % space. + % + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). + % + \def\definedummyword ##1{\def##1{\string##1\space}}% + \def\definedummyletter##1{\def##1{\string##1}}% + \let\definedummyaccent\definedummyletter % \commondummiesnofonts % - \definedummyletter{_}% + \definedummyletter\_% % % Non-English letters. - \definedummyword{AA}% - \definedummyword{AE}% - \definedummyword{L}% - \definedummyword{OE}% - \definedummyword{O}% - \definedummyword{aa}% - \definedummyword{ae}% - \definedummyword{l}% - \definedummyword{oe}% - \definedummyword{o}% - \definedummyword{ss}% - \definedummyword{exclamdown}% - \definedummyword{questiondown}% - \definedummyword{ordf}% - \definedummyword{ordm}% + \definedummyword\AA + \definedummyword\AE + \definedummyword\L + \definedummyword\OE + \definedummyword\O + \definedummyword\aa + \definedummyword\ae + \definedummyword\l + \definedummyword\oe + \definedummyword\o + \definedummyword\ss + \definedummyword\exclamdown + \definedummyword\questiondown + \definedummyword\ordf + \definedummyword\ordm % % Although these internal commands shouldn't show up, sometimes they do. - \definedummyword{bf}% - \definedummyword{gtr}% - \definedummyword{hat}% - \definedummyword{less}% - \definedummyword{sf}% - \definedummyword{sl}% - \definedummyword{tclose}% - \definedummyword{tt}% + \definedummyword\bf + \definedummyword\gtr + \definedummyword\hat + \definedummyword\less + \definedummyword\sf + \definedummyword\sl + \definedummyword\tclose + \definedummyword\tt % - \definedummyword{LaTeX}% - \definedummyword{TeX}% + \definedummyword\LaTeX + \definedummyword\TeX % % Assorted special characters. - \definedummyword{bullet}% - \definedummyword{comma}% - \definedummyword{copyright}% - \definedummyword{registeredsymbol}% - \definedummyword{dots}% - \definedummyword{enddots}% - \definedummyword{equiv}% - \definedummyword{error}% - \definedummyword{expansion}% - \definedummyword{minus}% - \definedummyword{pounds}% - \definedummyword{point}% - \definedummyword{print}% - \definedummyword{result}% + \definedummyword\bullet + \definedummyword\comma + \definedummyword\copyright + \definedummyword\registeredsymbol + \definedummyword\dots + \definedummyword\enddots + \definedummyword\equiv + \definedummyword\error + \definedummyword\euro + \definedummyword\expansion + \definedummyword\minus + \definedummyword\pounds + \definedummyword\point + \definedummyword\print + \definedummyword\result + % + % We want to disable all macros so that they are not expanded by \write. + \macrolist + % + \normalturnoffactive % % Handle some cases of @value -- where it does not contain any % (non-fully-expandable) commands. \makevalueexpandable - % - % Normal spaces, not active ones. - \unsepspaces - % - % No macro expansion. - \turnoffmacros } % \commondummiesnofonts: common to \commondummies and \indexnofonts. @@ -3182,57 +3335,57 @@ \catcode`\~=\other \gdef\commondummiesnofonts{% % Control letters and accents. - \definedummyletter{!}% - \definedummyaccent{"}% - \definedummyaccent{'}% - \definedummyletter{*}% - \definedummyaccent{,}% - \definedummyletter{.}% - \definedummyletter{/}% - \definedummyletter{:}% - \definedummyaccent{=}% - \definedummyletter{?}% - \definedummyaccent{^}% - \definedummyaccent{`}% - \definedummyaccent{~}% - \definedummyword{u}% - \definedummyword{v}% - \definedummyword{H}% - \definedummyword{dotaccent}% - \definedummyword{ringaccent}% - \definedummyword{tieaccent}% - \definedummyword{ubaraccent}% - \definedummyword{udotaccent}% - \definedummyword{dotless}% + \definedummyletter\!% + \definedummyaccent\"% + \definedummyaccent\'% + \definedummyletter\*% + \definedummyaccent\,% + \definedummyletter\.% + \definedummyletter\/% + \definedummyletter\:% + \definedummyaccent\=% + \definedummyletter\?% + \definedummyaccent\^% + \definedummyaccent\`% + \definedummyaccent\~% + \definedummyword\u + \definedummyword\v + \definedummyword\H + \definedummyword\dotaccent + \definedummyword\ringaccent + \definedummyword\tieaccent + \definedummyword\ubaraccent + \definedummyword\udotaccent + \definedummyword\dotless % % Texinfo font commands. - \definedummyword{b}% - \definedummyword{i}% - \definedummyword{r}% - \definedummyword{sc}% - \definedummyword{t}% + \definedummyword\b + \definedummyword\i + \definedummyword\r + \definedummyword\sc + \definedummyword\t % % Commands that take arguments. - \definedummyword{acronym}% - \definedummyword{cite}% - \definedummyword{code}% - \definedummyword{command}% - \definedummyword{dfn}% - \definedummyword{emph}% - \definedummyword{env}% - \definedummyword{file}% - \definedummyword{kbd}% - \definedummyword{key}% - \definedummyword{math}% - \definedummyword{option}% - \definedummyword{samp}% - \definedummyword{strong}% - \definedummyword{tie}% - \definedummyword{uref}% - \definedummyword{url}% - \definedummyword{var}% - \definedummyword{verb}% - \definedummyword{w}% + \definedummyword\acronym + \definedummyword\cite + \definedummyword\code + \definedummyword\command + \definedummyword\dfn + \definedummyword\emph + \definedummyword\env + \definedummyword\file + \definedummyword\kbd + \definedummyword\key + \definedummyword\math + \definedummyword\option + \definedummyword\samp + \definedummyword\strong + \definedummyword\tie + \definedummyword\uref + \definedummyword\url + \definedummyword\var + \definedummyword\verb + \definedummyword\w } } @@ -3243,13 +3396,9 @@ % \def\indexnofonts{% % Accent commands should become @asis. - \def\definedummyaccent##1{% - \expandafter\let\csname ##1\endcsname\asis - }% + \def\definedummyaccent##1{\let##1\asis}% % We can just ignore other control letters. - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{}% - }% + \def\definedummyletter##1{\let##1\empty}% % Hopefully, all control words can become @asis. \let\definedummyword\definedummyaccent % @@ -3295,6 +3444,7 @@ \def\enddots{...}% \def\equiv{==}% \def\error{error}% + \def\euro{euro}% \def\expansion{==>}% \def\minus{-}% \def\pounds{pounds}% @@ -3302,8 +3452,17 @@ \def\print{-|}% \def\result{=>}% % - % Don't write macro names. - \emptyusermacros + % We need to get rid of all macros, leaving only the arguments (if present). + % Of course this is not nearly correct, but it is the best we can do for now. + % makeinfo does not expand macros in the argument to @deffn, which ends up + % writing an index entry, and texindex isn't prepared for an index sort entry + % that starts with \. + % + % Since macro invocations are followed by braces, we can just redefine them + % to take a single TeX argument. The case of a macro invocation that + % goes to end-of-line is not handled. + % + \macrolist } \let\indexbackslash=0 %overridden during \printindex. @@ -3350,7 +3509,6 @@ % % Remember, we are within a group. \indexdummies % Must do this here, since \bf, etc expand at this stage - \escapechar=`\\ \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now % so it will be output as is; and it will print as backslash. % @@ -4217,11 +4375,11 @@ \ifx\temptype\Ynothingkeyword \setbox0 = \hbox{}% \def\toctype{unnchap}% - \def\thischapter{#1}% + \gdef\thischapter{#1}% \else\ifx\temptype\Yomitfromtockeyword \setbox0 = \hbox{}% contents like unnumbered, but no toc entry \def\toctype{omit}% - \xdef\thischapter{}% + \gdef\thischapter{}% \else\ifx\temptype\Yappendixkeyword \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% \def\toctype{app}% @@ -4410,11 +4568,11 @@ \fi % \iflinks - \toks0 = {#2}% - \toks2 = \expandafter{\lastnode}% - \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}% - {\the\toks2}{\noexpand\folio}}}% - \temp + {\atdummies + \edef\temp{% + \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% + \temp + } \fi \fi % @@ -4427,6 +4585,31 @@ \ifpdf \global\pdfmakepagedesttrue \fi } + +% These characters do not print properly in the Computer Modern roman +% fonts, so we must take special care. This is more or less redundant +% with the Texinfo input format setup at the end of this file. +% +\def\activecatcodes{% + \catcode`\"=\active + \catcode`\$=\active + \catcode`\<=\active + \catcode`\>=\active + \catcode`\\=\active + \catcode`\^=\active + \catcode`\_=\active + \catcode`\|=\active + \catcode`\~=\active +} + + +% Read the toc file, which is essentially Texinfo input. +\def\readtocfile{% + \setupdatafile + \activecatcodes + \input \jobname.toc +} + \newskip\contentsrightmargin \contentsrightmargin=1in \newcount\savepageno \newcount\lastnegativepageno \lastnegativepageno = -1 @@ -4448,11 +4631,7 @@ % \savepageno = \pageno \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi - \raggedbottom % Worry more about breakpoints than the bottom. + \raggedbottom % Worry more about breakpoints than the bottom. \advance\hsize by -\contentsrightmargin % Don't use the full line length. % % Roman numerals for page numbers. @@ -4465,7 +4644,7 @@ \startcontents{\putwordTOC}% \openin 1 \jobname.toc \ifeof 1 \else - \input \jobname.toc + \readtocfile \fi \vfill \eject \contentsalignmacro % in case @setchapternewpage odd is in effect @@ -4503,7 +4682,7 @@ \let\unnsubsubsecentry = \numsecentry \openin 1 \jobname.toc \ifeof 1 \else - \input \jobname.toc + \readtocfile \fi \closein 1 \vfill \eject @@ -4693,6 +4872,7 @@ \let\/=\ptexslash \let\*=\ptexstar \let\t=\ptext + \let\frenchspacing=\plainfrenchspacing % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% @@ -4738,7 +4918,8 @@ \let\afterenvbreak = \aboveenvbreak -% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will +% also clear it, so that its embedded environments do the narrowing again. \let\nonarrowing=\relax % @cartouche ... @end cartouche: draw rectangle w/rounded corners around @@ -4775,7 +4956,7 @@ % each corner char, and rule thickness \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment + \let\nonarrowing = t% \vbox\bgroup \baselineskip=0pt\parskip=0pt\lineskip=0pt \carttop @@ -4815,11 +4996,11 @@ \parskip = 0pt \parindent = 0pt \emergencystretch = 0pt % don't try to avoid overfull boxes - % @cartouche defines \nonarrowing to inhibit narrowing - % at next level down. \ifx\nonarrowing\relax \advance \leftskip by \lispnarrowing \exdentamount=\lispnarrowing + \else + \let\nonarrowing = \relax \fi \let\exdent=\nofillexdent } @@ -4919,6 +5100,7 @@ \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing \exdentamount = \lispnarrowing + \else \let\nonarrowing = \relax \fi \parsearg\quotationlabel @@ -5011,8 +5193,8 @@ } \endgroup \def\setupverbatim{% + \let\nonarrowing = t% \nonfillstart - \advance\leftskip by -\defbodyindent % Easiest (and conventionally used) font for verbatim \tt \def\par{\leavevmode\egroup\box0\endgraf}% @@ -5482,8 +5664,19 @@ \newcount\paramno % Count of parameters \newtoks\macname % Macro name \newif\ifrecursive % Is it recursive? -\def\macrolist{} % List of all defined macros in the form - % \do\macro1\do\macro2... + +% List of all defined macros in the form +% \definedummyword\macro1\definedummyword\macro2... +% Currently is also contains all @aliases; the list can be split +% if there is a need. +\def\macrolist{} + +% Add the macro to \macrolist +\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname} +\def\addtomacrolistxxx#1{% + \toks0 = \expandafter{\macrolist\definedummyword#1}% + \xdef\macrolist{\the\toks0}% +} % Utility routines. % This does \let #1 = #2, with \csnames; that is, @@ -5581,10 +5774,7 @@ \else \errmessage{Macro name \the\macname\space already defined}\fi \global\cslet{macsave.\the\macname}{\the\macname}% \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% - % Add the macroname to \macrolist - \toks0 = \expandafter{\macrolist\do}% - \xdef\macrolist{\the\toks0 - \expandafter\noexpand\csname\the\macname\endcsname}% + \addtomacrolist{\the\macname}% \fi \begingroup \macrobodyctxt \ifrecursive \expandafter\parsermacbody @@ -5598,7 +5788,7 @@ % Remove the macro name from \macrolist: \begingroup \expandafter\let\csname#1\endcsname \relax - \let\do\unmacrodo + \let\definedummyword\unmacrodo \xdef\macrolist{\macrolist}% \endgroup \else @@ -5610,10 +5800,10 @@ % macro definitions that have been changed to \relax. % \def\unmacrodo#1{% - \ifx#1\relax + \ifx #1\relax % remove this \else - \noexpand\do \noexpand #1% + \noexpand\definedummyword \noexpand#1% \fi } @@ -5732,25 +5922,6 @@ \expandafter\parsearg \fi \next} -% We want to disable all macros during \shipout so that they are not -% expanded by \write. -\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% - \edef\next{\macrolist}\expandafter\endgroup\next} - -% For \indexnofonts, we need to get rid of all macros, leaving only the -% arguments (if present). Of course this is not nearly correct, but it -% is the best we can do for now. makeinfo does not expand macros in the -% argument to @deffn, which ends up writing an index entry, and texindex -% isn't prepared for an index sort entry that starts with \. -% -% Since macro invocations are followed by braces, we can just redefine them -% to take a single TeX argument. The case of a macro invocation that -% goes to end-of-line is not handled. -% -\def\emptyusermacros{\begingroup - \def\do##1{\let\noexpand##1=\noexpand\asis}% - \edef\next{\macrolist}\expandafter\endgroup\next} - % @alias. % We need some trickery to remove the optional spaces around the equal @@ -5760,6 +5931,7 @@ \def\aliasyyy #1=#2\relax{% {% \expandafter\let\obeyedspace=\empty + \addtomacrolist{#1}% \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% }% \next @@ -5829,8 +6001,6 @@ \iflinks {% \atdummies % preserve commands, but don't expand them - \turnoffactive - \otherbackslash \edef\writexrdef##1##2{% \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef ##1}{##2}}% these are parameters of \writexrdef @@ -5884,13 +6054,17 @@ \ifpdf \leavevmode \getfilename{#4}% - {\turnoffactive \otherbackslash + {\turnoffactive + % See comments at \activebackslashdouble. + {\activebackslashdouble \xdef\pdfxrefdest{#1}% + \backslashparens\pdfxrefdest}% + % \ifnum\filenamelength>0 \startlink attr{/Border [0 0 0]}% - goto file{\the\filename.pdf} name{#1}% + goto file{\the\filename.pdf} name{\pdfxrefdest}% \else \startlink attr{/Border [0 0 0]}% - goto name{\pdfmkpgn{#1}}% + goto name{\pdfmkpgn{\pdfxrefdest}}% \fi }% \linkcolor @@ -5904,7 +6078,6 @@ % include an _ in the xref name, etc. \indexnofonts \turnoffactive - \otherbackslash \expandafter\global\expandafter\let\expandafter\Xthisreftitle \csname XR#1-title\endcsname }% @@ -5939,7 +6112,7 @@ % into the usual \leavevmode...\vrule stuff for purposes of % printing. So we \turnoffactive for the \refx-snt, back on for the % printing, back off for the \refx-pg. - {\turnoffactive \otherbackslash + {\turnoffactive % Only output a following space if the -snt ref is nonempty; for % @unnumbered and @anchor, it won't be. \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% @@ -5952,7 +6125,7 @@ ,\space % % output the `page 3'. - \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% \fi \fi \endlink @@ -6055,13 +6228,13 @@ \def\tryauxfile{% \openin 1 \jobname.aux \ifeof 1 \else - \readauxfile + \readdatafile{aux}% \global\havexrefstrue \fi \closein 1 } -\def\readauxfile{\begingroup +\def\setupdatafile{% \catcode`\^^@=\other \catcode`\^^A=\other \catcode`\^^B=\other @@ -6130,11 +6303,11 @@ % % Make the characters 128-255 be printing characters. {% - \count 1=128 + \count1=128 \def\loop{% - \catcode\count 1=\other - \advance\count 1 by 1 - \ifnum \count 1<256 \loop \fi + \catcode\count1=\other + \advance\count1 by 1 + \ifnum \count1<256 \loop \fi }% }% % @@ -6142,10 +6315,13 @@ \catcode`\{=1 \catcode`\}=2 \catcode`\@=0 - % - \input \jobname.aux -\endgroup} +} +\def\readdatafile#1{% +\begingroup + \setupdatafile + \input\jobname.#1 +\endgroup} \message{insertions,} % including footnotes. @@ -6492,7 +6668,7 @@ % \floatlabel-lof. Besides \floatident, we include the short % caption if specified, else the full caption if specified, else nothing. {% - \atdummies \turnoffactive \otherbackslash + \atdummies % since we read the caption text in the macro world, where ^^M % is turned into a normal character, we have to scan it back, so % we don't write the literal three characters "^^M" into the aux file. @@ -6682,9 +6858,9 @@ \fi } -% Parameters in order: 1) textheight; 2) textwidth; 3) voffset; -% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8) -% physical page width. +% Parameters in order: 1) textheight; 2) textwidth; +% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip; +% 7) physical page height; 8) physical page width. % % We also call \setleading{\textleading}, so the caller should define % \textleading. The caller should also set \parskip. @@ -6731,7 +6907,7 @@ {11in}{8.5in}% }} -% Use @smallbook to reset parameters for 7x9.5 (or so) format. +% Use @smallbook to reset parameters for 7x9.25 trim size. \def\smallbook{{\globaldefs = 1 \parskip = 2pt plus 1pt \textleading = 12pt @@ -6748,6 +6924,24 @@ \defbodyindent = .5cm }} +% Use @smallerbook to reset parameters for 6x9 trim size. +% (Just testing, parameters still in flux.) +\def\smallerbook{{\globaldefs = 1 + \parskip = 1.5pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.4in}{4.8in}% + {-.2in}{-.4in}% + {0pt}{14pt}% + {9in}{6in}% + % + \lispnarrowing = 0.25in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .4cm +}} + % Use @afourpaper to print on European A4 paper. \def\afourpaper{{\globaldefs = 1 \parskip = 3pt plus 2pt minus 1pt @@ -6900,6 +7094,7 @@ \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} +\let\realunder=_ % Subroutine for the previous macro. \def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } @@ -6937,8 +7132,9 @@ @gdef@otherbackslash{@let\=@realbackslash} } -% \realbackslash is an actual character `\' with catcode other. -{\catcode`\\=\other @gdef@realbackslash{\}} +% \realbackslash is an actual character `\' with catcode other, and +% \doublebackslash is two of them (for the pdf outlines). +{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} % \normalbackslash outputs one backslash in fixed width font. \def\normalbackslash{{\tt\backslashcurfont}} @@ -6981,7 +7177,7 @@ % On the other hand, perhaps the file did not have a `\input texinfo'. Then % the first `\{ in the file would cause an error. This macro tries to fix % that, assuming it is called before the first `\' could plausibly occur. -% Also back turn on active characters that might appear in the input +% Also turn back on active characters that might appear in the input % file name, in case not using a pre-dumped format. % @gdef@fixbackslash{% Modified: freeswitch/trunk/libs/iksemel/configure.ac ============================================================================== --- freeswitch/trunk/libs/iksemel/configure.ac (original) +++ freeswitch/trunk/libs/iksemel/configure.ac Wed Feb 4 18:16:40 2009 @@ -1,9 +1,10 @@ dnl Process this file with autoconf to produce a configure script. AC_INIT AC_PREREQ(2.50) +AC_CONFIG_AUX_DIR(build) AC_CONFIG_SRCDIR([configure.ac]) -AM_INIT_AUTOMAKE(iksemel,1.2) -AM_CONFIG_HEADER(include/config.h) +AM_INIT_AUTOMAKE(iksemel,1.3) +AC_CONFIG_HEADERS(include/config.h) AC_CANONICAL_HOST @@ -54,6 +55,35 @@ fi fi +AC_DEFUN([AX_COMPILER_VENDOR], +[ +AC_CACHE_CHECK([for _AC_LANG compiler vendor], ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor, + [ax_cv_[]_AC_LANG_ABBREV[]_compiler_vendor=unknown + # note: don't check for gcc first since some other compilers define __GNUC__ + for ventest in intel:__ICC,__ECC,__INTEL_COMPILER ibm:__xlc__,__xlC__,__IBMC__,__IBMCPP__ gnu:__GNUC__ sun:__SUNPRO_C,__SUNPRO_CC hp:__HP_cc,__HP_aCC dec:__DECC,__DECCXX,__DECC_VER,__DECCXX_VER borland:__BORLANDC__,__TURBOC__ comeau:__COMO__ cray:_CRAYC kai:__KCC lcc:__LCC__ metrowerks:__MWERKS__ sgi:__sgi,sgi microsoft:_MSC_VER watcom:__WATCOMC__ portland:__PGI; do + vencpp="defined("`echo $ventest | cut -d: -f2 | sed 's/,/) || defined(/g'`")" + AC_COMPILE_IFELSE([AC_LANG_PROGRAM(,[ +#if !($vencpp) + thisisanerror; +#endif +])], [ax_cv_]_AC_LANG_ABBREV[_compiler_vendor=`echo $ventest | cut -d: -f1`; break]) + done + ]) +]) + +AX_COMPILER_VENDOR + +# Enable 64 bit build +AC_ARG_ENABLE(64, +[AC_HELP_STRING([--enable-64],[build with 64 bit support])],[enable_64="$enable_64"],[enable_64="no"]) + +if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then + if test "${enable_64}" = "yes"; then + CFLAGS="$CFLAGS -m64" + CXXFLAGS="$CXXFLAGS -m64" + fi +fi + dnl Generating makefiles AC_CONFIG_FILES([ Makefile