Added: freeswitch/trunk/contrib/trixter/radio/fs_rpt.pl (0 => 14759)
--- freeswitch/trunk/contrib/trixter/radio/fs_rpt.pl (rev 0)
+++ freeswitch/trunk/contrib/trixter/radio/fs_rpt.pl 2009-09-04 00:50:43 UTC (rev 14759)
@@ -0,0 +1,267 @@
+#!/usr/bin/perl
+# -*- mode:perl; tab-width:4; c-basic-offset:4; c-indent-level:4; indent-tabs-mode:nil; -*-
+# Copyright (C) 2009, Bret McDanel <trixter AT 0xdecafbad.com>
+#
+# Version: MPL 1.1
+#
+# The contents of this file are subject to the Mozilla Public License Version
+# 1.1 (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+# http://www.mozilla.org/MPL/
+#
+# Software distributed under the License is distributed on an "AS IS" basis,
+# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+# for the specific language governing rights and limitations under the
+# License.
+#
+# The Original Code is FreeSWITCH Radio Interface
+#
+# The Initial Developer of the Original Code is
+# Bret McDanel <trixter AT 0xdecafbad.com>
+# Portions created by the Initial Developer are Copyright (C)
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#
+# Bret McDanel <trixter AT 0xdecafbad.com>
+
+# WARNING:
+# Certain laws apply in virtually every jurisdiction to the use
+# of radio transmitters. By connecting a radio transmitter to
+# your system you assume all responsibility for its use, and the
+# content that others may provide.
+# Be aware of the laws, and follow them.
+
+# This script will connect to event socket and bridge a ham radio into
+# a conference via portaudio.
+#
+# If anyone on the radio side presses DTMF it can react to that
+# Autopatch
+# Bring up a prespecified link (echolink or irlp type functionality)
+# Announce some information
+# Perform other actions like kicking people out of the conference
+#
+# If anyone on the internet side connects
+# Their audio is relayed through the radio using the talking events
+
+
+
+
+
+
+use Device::SerialPins;
+use Getopt::Std;
+use strict;
+use FreeSWITCH::Client;
+use POSIX ':signal_h'; # used for alarm to ensure we get heartbeats
+use Switch;
+use Data::Dumper; # used to print out myhash debug info
+use File::stat;
+
+
+my $password = "ClueCon"; # event socket password
+my $host = "localhost"; # event socket host
+my $port = 8021; # event socket port
+my $device = undef; # radio control device (/dev/ttyS0, COM1, etc)
+my $baud = 9600; # radio control device baud rate
+my $timeout = 30; # seconds to expect a heartbeat or reconnect
+my $courtesy_tone = "tone_stream://%(150,150,500);%(150,0,400)"; # tone played before releasing PTT
+#my $courtesy_tone = "/sounds/beep.wav"; # play a sound file
+#my $courtesy_tone = undef; # disable courtesy tone
+my $confname = "radio"; # the name of the conference
+my $extension = "1337"; # this is the extension that portaudio will call to join
+my $callsign = "kc2dwq"; # callsign for morse autoID
+#my $callsign = undef; # disable callsign autoID
+my $callsign_interval = 600; # 10 minute intervals
+
+
+# for TTS anouncements played after CWID - undef to disable
+my $voice = "Allison";
+my $swift = "/opt/swift/bin/swift";
+my $filetime = 0;
+
+
+# normal users do not need to edit anything below here
+my %options;
+my $fs;
+my $lastheartbeat;
+my $lastcallsign;
+my $lasttx;
+my $releasePTT=0;
+my $ptt_port;
+
+
+
+sub pressPTT()
+{
+ $ptt_port->set_rts(1);
+}
+
+sub releasePTT()
+{
+ $ptt_port->set_rts(0);
+}
+
+
+# this connects to the event socket
+sub es_connect()
+{
+ print "Connecting to $host:$port\n";
+ eval {
+ $fs = init FreeSWITCH::Client {-password => $password, -host => $host, -port => $port};
+ if(defined $fs) {
+ $fs->sendmsg({'command' => 'event plain heartbeat CUSTOM conference::maintenance'});
+ $lastheartbeat = time;
+ }
+ } or do {
+ print "Error connecting - waiting for retry\n";
+ sleep(10);
+ }
+}
+
+
+sigaction SIGALRM, new POSIX::SigAction sub {
+ if ($lastheartbeat < (time - $timeout)) {
+ print "Did not receive a heartbeat in the specified timeout\n";
+ if (defined $fs) {
+ $fs->disconnect();
+ undef $fs;
+ }
+ es_connect();
+ }
+
+ if(defined $callsign && $lastcallsign < (time - $callsign_interval) && $lasttx > $lastcallsign) {
+ pressPTT();
+ $fs->command("jsapi morse.js conference radio ".$callsign);
+ $lastcallsign = time;
+ $releasePTT++;
+
+
+ if (-f "announcement.txt") {
+ if(stat("announcement.txt")->mtime > $filetime && defined $voice $$ defined $swift) {
+ system("$swift -p audio/deadair=2000,audio/sampling-rate=8000,audio/channels=1,audio/encoding=pcm16,audio/output-format=raw -o /tmp/announcement.raw -f announcement.txt -n $voice");
+ $fs->command("conference ".$confname." play /tmp/announcement.raw");
+ }
+ }
+ }
+
+ # reset the alarm
+ alarm $timeout;
+} or die "Error setting SIGALRM handler: $!\n";
+
+sub usage()
+{
+ print "Usage: $0 [-p pass] [-P port] [-H host] [-d device] [-b baud]\n";
+ print "example: $0 -p password -P 8021 -H localhost -d /dev/ttyS0 -b 38400\n";
+ exit;
+}
+
+
+sub checkArgs()
+{
+ getopts("p:P:H:d:b:h",\%options);
+ usage() if defined $options{h};
+ $password = $options{p} if defined $options{p};
+ $host = $options{H} if defined $options{H};
+ $port = $options{P} if defined $options{P};
+ $device = $options{d} if defined $options{d};
+ $baud = $options{b} if defined $options{b};
+
+ if(! defined $device || ! defined $password ||
+ ! defined $host || ! defined $port) {
+ usage();
+ exit;
+ }
+}
+
+
+checkArgs();
+$ptt_port = Device::SerialPins->new($device);
+releasePTT();
+es_connect();
+alarm $timeout;
+
+
+
+$SIG{INT} = "byebye"; # traps keyboard interrupt (^C)
+
+sub byebye {
+ if(defined $fs) {
+ $fs->command("pa hangup");
+ }
+ exit();
+}
+
+
+if(defined $fs) {
+ $fs->command("pa call ".$extension);
+} else {
+ print "Unable to start portaudio channel\n";
+}
+
+$lastcallsign = time;
+
+while (1) {
+ if(defined $fs) {
+ my $reply = $fs->readhash(undef);
+ if ($reply->{socketerror}) {
+ es_connect();
+ }
+
+ if($reply->{body}) {
+ my $myhash = $reply->{event};
+
+ if ($myhash->{'event-name'} eq "HEARTBEAT") {
+ $lastheartbeat = time;
+ } elsif ($myhash->{'event-subclass'} eq "conference::maintenance") {
+ if($myhash->{'conference-name'} eq $confname) {
+ if($myhash->{'caller-channel-name'} =~ m/^portaudio/) {
+ # this is from the radio
+ if($myhash->{'action'} eq 'dtmf') {
+ switch($myhash->{'dtmf-key'}) {
+ # I will be adding some "dial" instructions for autopatch
+ # and maybe some other settings here
+ }
+ }
+ } else {
+ # this is from everyone else
+ if ($myhash->{'action'} eq 'start-talking') {
+ print "The port is talking! keying mic\n";
+ $lasttx = time;
+ pressPTT();
+ } elsif ($myhash->{'action'} eq 'stop-talking') {
+ print "The port stopped talking! releasing mic\n";
+ if(defined $courtesy_tone) {
+ $fs->command("conference ".$confname." play ".$courtesy_tone);
+ $releasePTT++;
+ }
+ }
+ }
+
+ if($myhash->{'action'} eq 'dtmf') {
+ print "conf: $myhash->{'conference-name'}\tmember: $myhash->{'member-id'}\tDTMF: $myhash->{'dtmf-key'}\n";
+ } elsif ($myhash->{'action'} eq 'play-file') {
+ print "conf: $myhash->{'conference-name'}\taction: $myhash->{'action'}\tfile: $myhash->{'file'}\n";
+ } elsif ($myhash->{'action'} eq 'play-file-done') {
+ print "conf: $myhash->{'conference-name'}\taction: $myhash->{'action'}\tfile: $myhash->{'file'}\n";
+ if($releasePTT>0) {
+ $releasePTT--;
+ }
+print "release PTT: $releasePTT\n";
+ if($releasePTT==0) {
+ releasePTT();
+ }
+ } else {
+ print "conf: $myhash->{'conference-name'}\tmemid: $myhash->{'member-id'}\taction: $myhash->{'action'}\tCLID: $myhash->{'caller-caller-id-number'}\n";
+ }
+ } else {
+ print "conf: $myhash->{'conference-name'}\tmemid: $myhash->{'member-id'}\taction: $myhash->{'action'}\tCLID: $myhash->{'caller-caller-id-number'}\n";
+ }
+ } else {
+ print Dumper $myhash;
+ }
+ }
+ } else {
+ es_connect();
+ }
+}
Property changes on: freeswitch/trunk/contrib/trixter/radio/fs_rpt.pl
___________________________________________________________________
Name: svn:executable
+ *
Added: freeswitch/trunk/contrib/trixter/radio/ham-radio.README (0 => 14759)
--- freeswitch/trunk/contrib/trixter/radio/ham-radio.README (rev 0)
+++ freeswitch/trunk/contrib/trixter/radio/ham-radio.README 2009-09-04 00:50:43 UTC (rev 14759)
@@ -0,0 +1,10 @@
+morse.js - lets you send audible morse code to a conference or uuid
+ cp to /usr/local/freeswitch/scripts (or wherever it was installed)
+ see script for usage information.
+fs_rpt.pl - lets you bridge your ham radio (or other) into freeswitch.
+ requires morse.js for CWID identification if you are using it
+ like a repeater and your jurisdiction requires this.
+ requires a hardware adapter to key the mic.
+ I will be writing up exactly how to do this, somewhere under
+ "radio" on http://www.0xdecafbad.com is the circuit for a
+ Yaesu FT-897 radio (which works for many transceivers).