March 2007 - Freeswitch-svn - FreeSWITCH Mailing Lists

[commit] r4576 - freeswitch/trunk/src/mod/formats/mod_shout
by Freeswitch SVN 13 Mar '07

13 Mar '07

Author: brian Date: Mon Mar 12 22:02:28 2007 New Revision: 4576 Added: freeswitch/trunk/src/mod/formats/mod_shout/MPGLIB_README freeswitch/trunk/src/mod/formats/mod_shout/MPGLIB_TODO freeswitch/trunk/src/mod/formats/mod_shout/common.c freeswitch/trunk/src/mod/formats/mod_shout/dct64_i386.c freeswitch/trunk/src/mod/formats/mod_shout/decode_i386.c freeswitch/trunk/src/mod/formats/mod_shout/decode_ntom.c freeswitch/trunk/src/mod/formats/mod_shout/huffman.h freeswitch/trunk/src/mod/formats/mod_shout/interface.c freeswitch/trunk/src/mod/formats/mod_shout/layer3.c freeswitch/trunk/src/mod/formats/mod_shout/mpg123.h freeswitch/trunk/src/mod/formats/mod_shout/mpglib.h freeswitch/trunk/src/mod/formats/mod_shout/tabinit.c Modified: freeswitch/trunk/src/mod/formats/mod_shout/Makefile freeswitch/trunk/src/mod/formats/mod_shout/mod_shout.c Log: add framework for shout read (not done yet i'd wait to try it) Added: freeswitch/trunk/src/mod/formats/mod_shout/MPGLIB_README ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/MPGLIB_README Mon Mar 12 22:02:28 2007 @@ -0,0 +1,39 @@ +MP3 library +----------- +Version 0.2 + +This decoder is a 'light' version (thrown out all unnecessay parts) +from the mpg123 package. I made this for a company. + +Currently only Layer3 is enabled to save some space. Layer1,2 isn't +tested at all. The interface will not change significantly. +A backport to the mpg123 package is planed. + +comiled and tested only on Solaris 2.6 +main.c contains a simple demo application for library. + +COPYING: you may use this source under GPL terms! + +PLEASE NOTE: This software may contain patented alogrithm (at least + patented in some countries). It may be not allowed to sell/use products + based on this source code in these countries. Check this out first! + +COPYRIGHT of MP3 music: + Please note, that the duplicating of copyrighted music without explicit + permission violates the rights of the owner. + +SENDING PATCHES: + Maybe I change the copyright policy (ie some kind of more free BSD licencse). + Please consider this when sending patches/changes. + I also want to have the freedom to sell the code to companies that + can not use the code under GPL. So, if you send me significant patches, + I need your explicit permission to do this. Of course, there will also + be the GPLed open source version of the 100% same code. + For the case you cannot accept this: the code is GPL, it's your freedom + to distribute your changes again under GPL. + +FEEDBACK: + I'm interessted to here from you, when you use this package as part + of another project. + + Added: freeswitch/trunk/src/mod/formats/mod_shout/MPGLIB_TODO ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/MPGLIB_TODO Mon Mar 12 22:02:28 2007 @@ -0,0 +1,2 @@ + +apply 'VBR' bugfix Modified: freeswitch/trunk/src/mod/formats/mod_shout/Makefile ============================================================================== --- freeswitch/trunk/src/mod/formats/mod_shout/Makefile (original) +++ freeswitch/trunk/src/mod/formats/mod_shout/Makefile Mon Mar 12 22:02:28 2007 @@ -2,11 +2,16 @@ # local_all local_depend local_clean depend_install local_install local_distclean local_extraclean: # and define these variables to impact your build -LOCAL_CFLAGS= -LOCAL_LDFLAGS=-lshout -lmp3lame +LOCAL_CFLAGS=-I$(BASE)/libs/curl/include +LOCAL_LDFLAGS=-lshout -lmp3lame $(BASE)/libs/curl/lib/libcurl.la LOCAL_OBJS= include $(BASE)/build/modmake.rules +MP3OBJS=common.o dct64_i386.o decode_ntom.o layer3.o tabinit.o interface.o -local_depend: +%.o: %.c + $(CC) $(ALL_CFLAGS) -c -o $@ $< + +local_depend: $(MP3OBJS) MAKE=$(MAKE) $(BASE)/build/buildlib.sh $(BASE) install lame-3.97.tar.gz --prefix=$(PREFIX) --disable-shared --with-pic MOD_CFLAGS="${ALL_CFLAGS}" MOD_LDFLAGS="${LD_CFLAGS}" MAKE=$(MAKE) $(BASE)/build/buildlib.sh $(BASE) install libshout-2.2.2.tar.gz --disable-shared --with-pic --prefix=$(PREFIX) + cd $(BASE)/libs/curl && $(MAKE) Added: freeswitch/trunk/src/mod/formats/mod_shout/common.c ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/common.c Mon Mar 12 22:02:28 2007 @@ -0,0 +1,264 @@ +#include <ctype.h> +#include <stdlib.h> +#include <signal.h> + +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> + +#include "mpg123.h" +#include "mpglib.h" + +struct parameter param = { 1 , 1 , 0 , 0 }; + +int tabsel_123[2][3][16] = { + { {0,32,64,96,128,160,192,224,256,288,320,352,384,416,448,}, + {0,32,48,56, 64, 80, 96,112,128,160,192,224,256,320,384,}, + {0,32,40,48, 56, 64, 80, 96,112,128,160,192,224,256,320,} }, + + { {0,32,48,56,64,80,96,112,128,144,160,176,192,224,256,}, + {0,8,16,24,32,40,48,56,64,80,96,112,128,144,160,}, + {0,8,16,24,32,40,48,56,64,80,96,112,128,144,160,} } +}; + +long freqs[9] = { 44100, 48000, 32000, + 22050, 24000, 16000 , + 11025 , 12000 , 8000 }; + + +#if 0 +static void get_II_stuff(struct frame *fr) +{ + static int translate[3][2][16] = + { { { 0,2,2,2,2,2,2,0,0,0,1,1,1,1,1,0 } , + { 0,2,2,0,0,0,1,1,1,1,1,1,1,1,1,0 } } , + { { 0,2,2,2,2,2,2,0,0,0,0,0,0,0,0,0 } , + { 0,2,2,0,0,0,0,0,0,0,0,0,0,0,0,0 } } , + { { 0,3,3,3,3,3,3,0,0,0,1,1,1,1,1,0 } , + { 0,3,3,0,0,0,1,1,1,1,1,1,1,1,1,0 } } }; + + int table,sblim; + static struct al_table *tables[5] = + { alloc_0, alloc_1, alloc_2, alloc_3 , alloc_4 }; + static int sblims[5] = { 27 , 30 , 8, 12 , 30 }; + + if(fr->lsf) + table = 4; + else + table = translate[fr->sampling_frequency][2-fr->stereo][fr->bitrate_index]; + sblim = sblims[table]; + + fr->alloc = tables[table]; + fr->II_sblimit = sblim; +} +#endif + +#define HDRCMPMASK 0xfffffd00 + +#if 0 +int head_check(unsigned long head) +{ + if( (head & 0xffe00000) != 0xffe00000) + return FALSE; + if(!((head>>17)&3)) + return FALSE; + if( ((head>>12)&0xf) == 0xf) + return FALSE; + if( ((head>>10)&0x3) == 0x3 ) + return FALSE; + return TRUE; +} +#endif + + +/* + * the code a header and write the information + * into the frame structure + */ +int decode_header(struct frame *fr,unsigned long newhead) +{ + if( newhead & (1<<20) ) { + fr->lsf = (newhead & (1<<19)) ? 0x0 : 0x1; + fr->mpeg25 = 0; + } + else { + fr->lsf = 1; + fr->mpeg25 = 1; + } + + fr->lay = 4-((newhead>>17)&3); + if( ((newhead>>10)&0x3) == 0x3) { + //printf("Stream error\n"); + return (0); + } + if(fr->mpeg25) { + fr->sampling_frequency = 6 + ((newhead>>10)&0x3); + } + else + fr->sampling_frequency = ((newhead>>10)&0x3) + (fr->lsf*3); + fr->error_protection = ((newhead>>16)&0x1)^0x1; + + if(fr->mpeg25) /* allow Bitrate change for 2.5 ... */ + fr->bitrate_index = ((newhead>>12)&0xf); + + fr->bitrate_index = ((newhead>>12)&0xf); + fr->padding = ((newhead>>9)&0x1); + fr->extension = ((newhead>>8)&0x1); + fr->mode = ((newhead>>6)&0x3); + fr->mode_ext = ((newhead>>4)&0x3); + fr->copyright = ((newhead>>3)&0x1); + fr->original = ((newhead>>2)&0x1); + fr->emphasis = newhead & 0x3; + + fr->stereo = (fr->mode == MPG_MD_MONO) ? 1 : 2; + + if(!fr->bitrate_index) + { + //printf("Free format not supported.\n"); + return (0); + } + + switch(fr->lay) + { + case 1: +#if 0 + fr->do_layer = do_layer1; + fr->jsbound = (fr->mode == MPG_MD_JOINT_STEREO) ? + (fr->mode_ext<<2)+4 : 32; + fr->framesize = (long) tabsel_123[fr->lsf][0][fr->bitrate_index] * 12000; + fr->framesize /= freqs[fr->sampling_frequency]; + fr->framesize = ((fr->framesize+fr->padding)<<2)-4; +#else + //printf("Layer 1 not supported!\n"); +#endif + break; + case 2: +#if 0 + fr->do_layer = do_layer2; + get_II_stuff(fr); + fr->jsbound = (fr->mode == MPG_MD_JOINT_STEREO) ? + (fr->mode_ext<<2)+4 : fr->II_sblimit; + fr->framesize = (long) tabsel_123[fr->lsf][1][fr->bitrate_index] * 144000; + fr->framesize /= freqs[fr->sampling_frequency]; + fr->framesize += fr->padding - 4; +#else + //printf("Layer 2 not supported!\n"); +#endif + break; + case 3: +#if 0 + fr->do_layer = do_layer3; + if(fr->lsf) + ssize = (fr->stereo == 1) ? 9 : 17; + else + ssize = (fr->stereo == 1) ? 17 : 32; +#endif + +#if 0 + if(fr->error_protection) + ssize += 2; +#endif + fr->framesize = (long) tabsel_123[fr->lsf][2][fr->bitrate_index] * 144000; + fr->framesize /= freqs[fr->sampling_frequency]<<(fr->lsf); + fr->framesize = fr->framesize + fr->padding - 4; + break; + default: + //printf("Sorry, unknown layer type.\n"); + return (0); + } + return 1; +} + +#if 0 +void print_header(struct frame *fr) +{ + static char *modes[4] = { "Stereo", "Joint-Stereo", "Dual-Channel", "Single-Channel" }; + static char *layers[4] = { "Unknown" , "I", "II", "III" }; + + //printf("MPEG %s, Layer: %s, Freq: %ld, mode: %s, modext: %d, BPF : %d\n", + fr->mpeg25 ? "2.5" : (fr->lsf ? "2.0" : "1.0"), + layers[fr->lay],freqs[fr->sampling_frequency], + modes[fr->mode],fr->mode_ext,fr->framesize+4); + //printf("Channels: %d, copyright: %s, original: %s, CRC: %s, emphasis: %d.\n", + fr->stereo,fr->copyright?"Yes":"No", + fr->original?"Yes":"No",fr->error_protection?"Yes":"No", + fr->emphasis); + //printf("Bitrate: %d Kbits/s, Extension value: %d\n", + tabsel_123[fr->lsf][fr->lay-1][fr->bitrate_index],fr->extension); +} + +void print_header_compact(struct frame *fr) +{ + static char *modes[4] = { "stereo", "joint-stereo", "dual-channel", "mono" }; + static char *layers[4] = { "Unknown" , "I", "II", "III" }; + + //printf("MPEG %s layer %s, %d kbit/s, %ld Hz %s\n", + fr->mpeg25 ? "2.5" : (fr->lsf ? "2.0" : "1.0"), + layers[fr->lay], + tabsel_123[fr->lsf][fr->lay-1][fr->bitrate_index], + freqs[fr->sampling_frequency], modes[fr->mode]); +} + +#endif + +unsigned int getbits(struct mpstr *mp, int number_of_bits) +{ + unsigned long rval; + + if(!number_of_bits) + return 0; + + { + rval = (mp->worksample).wordpointer[0]; + rval <<= 8; + rval |= (mp->worksample).wordpointer[1]; + rval <<= 8; + rval |= (mp->worksample).wordpointer[2]; + rval <<= (mp->worksample).bitindex; + rval &= 0xffffff; + + (mp->worksample).bitindex += number_of_bits; + + rval >>= (24-number_of_bits); + + (mp->worksample).wordpointer += ((mp->worksample).bitindex>>3); + (mp->worksample).bitindex &= 7; + } + return rval; +} + +unsigned int getbits_fast(struct mpstr *mp, int number_of_bits) +{ + unsigned long rval; + + { + rval = (mp->worksample).wordpointer[0]; + rval <<= 8; + rval |= (mp->worksample).wordpointer[1]; + rval <<= (mp->worksample).bitindex; + rval &= 0xffff; + (mp->worksample).bitindex += number_of_bits; + + rval >>= (16-number_of_bits); + + (mp->worksample).wordpointer += ((mp->worksample).bitindex>>3); + (mp->worksample).bitindex &= 7; + } + return rval; +} + +unsigned int get1bit(struct mpstr *mp) +{ + unsigned char rval; + + rval = *((mp->worksample).wordpointer) << (mp->worksample).bitindex; + + (mp->worksample).bitindex++; + (mp->worksample).wordpointer += ((mp->worksample).bitindex>>3); + (mp->worksample).bitindex &= 7; + + return rval>>7; +} + + + Added: freeswitch/trunk/src/mod/formats/mod_shout/dct64_i386.c ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/dct64_i386.c Mon Mar 12 22:02:28 2007 @@ -0,0 +1,335 @@ + +/* + * Discrete Cosine Tansform (DCT) for subband synthesis + * optimized for machines with no auto-increment. + * The performance is highly compiler dependend. Maybe + * the dct64.c version for 'normal' processor may be faster + * even for Intel processors. + */ + +#include "mpg123.h" + +/* + * the call via dct64 is a trick to force GCC to use + * (new) registers for the b1,b2 pointer to the bufs[xx] field + */ +void dct64(real *a,real *b,real *c); + +static void dct64_1(real *out0,real *out1,real *b1,real *b2,real *samples) +{ + { + register real *costab = pnts[0]; + + b1[0x00] = samples[0x00] + samples[0x1F]; + b1[0x01] = samples[0x01] + samples[0x1E]; + b1[0x1F] = (samples[0x00] - samples[0x1F]) * costab[0x0]; + b1[0x1E] = (samples[0x01] - samples[0x1E]) * costab[0x1]; + + b1[0x02] = samples[0x02] + samples[0x1D]; + b1[0x03] = samples[0x03] + samples[0x1C]; + b1[0x1D] = (samples[0x02] - samples[0x1D]) * costab[0x2]; + b1[0x1C] = (samples[0x03] - samples[0x1C]) * costab[0x3]; + + b1[0x04] = samples[0x04] + samples[0x1B]; + b1[0x05] = samples[0x05] + samples[0x1A]; + b1[0x1B] = (samples[0x04] - samples[0x1B]) * costab[0x4]; + b1[0x1A] = (samples[0x05] - samples[0x1A]) * costab[0x5]; + + b1[0x06] = samples[0x06] + samples[0x19]; + b1[0x07] = samples[0x07] + samples[0x18]; + b1[0x19] = (samples[0x06] - samples[0x19]) * costab[0x6]; + b1[0x18] = (samples[0x07] - samples[0x18]) * costab[0x7]; + + b1[0x08] = samples[0x08] + samples[0x17]; + b1[0x09] = samples[0x09] + samples[0x16]; + b1[0x17] = (samples[0x08] - samples[0x17]) * costab[0x8]; + b1[0x16] = (samples[0x09] - samples[0x16]) * costab[0x9]; + + b1[0x0A] = samples[0x0A] + samples[0x15]; + b1[0x0B] = samples[0x0B] + samples[0x14]; + b1[0x15] = (samples[0x0A] - samples[0x15]) * costab[0xA]; + b1[0x14] = (samples[0x0B] - samples[0x14]) * costab[0xB]; + + b1[0x0C] = samples[0x0C] + samples[0x13]; + b1[0x0D] = samples[0x0D] + samples[0x12]; + b1[0x13] = (samples[0x0C] - samples[0x13]) * costab[0xC]; + b1[0x12] = (samples[0x0D] - samples[0x12]) * costab[0xD]; + + b1[0x0E] = samples[0x0E] + samples[0x11]; + b1[0x0F] = samples[0x0F] + samples[0x10]; + b1[0x11] = (samples[0x0E] - samples[0x11]) * costab[0xE]; + b1[0x10] = (samples[0x0F] - samples[0x10]) * costab[0xF]; + + } + + + { + register real *costab = pnts[1]; + + b2[0x00] = b1[0x00] + b1[0x0F]; + b2[0x01] = b1[0x01] + b1[0x0E]; + b2[0x0F] = (b1[0x00] - b1[0x0F]) * costab[0]; + b2[0x0E] = (b1[0x01] - b1[0x0E]) * costab[1]; + + b2[0x02] = b1[0x02] + b1[0x0D]; + b2[0x03] = b1[0x03] + b1[0x0C]; + b2[0x0D] = (b1[0x02] - b1[0x0D]) * costab[2]; + b2[0x0C] = (b1[0x03] - b1[0x0C]) * costab[3]; + + b2[0x04] = b1[0x04] + b1[0x0B]; + b2[0x05] = b1[0x05] + b1[0x0A]; + b2[0x0B] = (b1[0x04] - b1[0x0B]) * costab[4]; + b2[0x0A] = (b1[0x05] - b1[0x0A]) * costab[5]; + + b2[0x06] = b1[0x06] + b1[0x09]; + b2[0x07] = b1[0x07] + b1[0x08]; + b2[0x09] = (b1[0x06] - b1[0x09]) * costab[6]; + b2[0x08] = (b1[0x07] - b1[0x08]) * costab[7]; + + /* */ + + b2[0x10] = b1[0x10] + b1[0x1F]; + b2[0x11] = b1[0x11] + b1[0x1E]; + b2[0x1F] = (b1[0x1F] - b1[0x10]) * costab[0]; + b2[0x1E] = (b1[0x1E] - b1[0x11]) * costab[1]; + + b2[0x12] = b1[0x12] + b1[0x1D]; + b2[0x13] = b1[0x13] + b1[0x1C]; + b2[0x1D] = (b1[0x1D] - b1[0x12]) * costab[2]; + b2[0x1C] = (b1[0x1C] - b1[0x13]) * costab[3]; + + b2[0x14] = b1[0x14] + b1[0x1B]; + b2[0x15] = b1[0x15] + b1[0x1A]; + b2[0x1B] = (b1[0x1B] - b1[0x14]) * costab[4]; + b2[0x1A] = (b1[0x1A] - b1[0x15]) * costab[5]; + + b2[0x16] = b1[0x16] + b1[0x19]; + b2[0x17] = b1[0x17] + b1[0x18]; + b2[0x19] = (b1[0x19] - b1[0x16]) * costab[6]; + b2[0x18] = (b1[0x18] - b1[0x17]) * costab[7]; + } + + { + register real *costab = pnts[2]; + + b1[0x00] = b2[0x00] + b2[0x07]; + b1[0x07] = (b2[0x00] - b2[0x07]) * costab[0]; + b1[0x01] = b2[0x01] + b2[0x06]; + b1[0x06] = (b2[0x01] - b2[0x06]) * costab[1]; + b1[0x02] = b2[0x02] + b2[0x05]; + b1[0x05] = (b2[0x02] - b2[0x05]) * costab[2]; + b1[0x03] = b2[0x03] + b2[0x04]; + b1[0x04] = (b2[0x03] - b2[0x04]) * costab[3]; + + b1[0x08] = b2[0x08] + b2[0x0F]; + b1[0x0F] = (b2[0x0F] - b2[0x08]) * costab[0]; + b1[0x09] = b2[0x09] + b2[0x0E]; + b1[0x0E] = (b2[0x0E] - b2[0x09]) * costab[1]; + b1[0x0A] = b2[0x0A] + b2[0x0D]; + b1[0x0D] = (b2[0x0D] - b2[0x0A]) * costab[2]; + b1[0x0B] = b2[0x0B] + b2[0x0C]; + b1[0x0C] = (b2[0x0C] - b2[0x0B]) * costab[3]; + + b1[0x10] = b2[0x10] + b2[0x17]; + b1[0x17] = (b2[0x10] - b2[0x17]) * costab[0]; + b1[0x11] = b2[0x11] + b2[0x16]; + b1[0x16] = (b2[0x11] - b2[0x16]) * costab[1]; + b1[0x12] = b2[0x12] + b2[0x15]; + b1[0x15] = (b2[0x12] - b2[0x15]) * costab[2]; + b1[0x13] = b2[0x13] + b2[0x14]; + b1[0x14] = (b2[0x13] - b2[0x14]) * costab[3]; + + b1[0x18] = b2[0x18] + b2[0x1F]; + b1[0x1F] = (b2[0x1F] - b2[0x18]) * costab[0]; + b1[0x19] = b2[0x19] + b2[0x1E]; + b1[0x1E] = (b2[0x1E] - b2[0x19]) * costab[1]; + b1[0x1A] = b2[0x1A] + b2[0x1D]; + b1[0x1D] = (b2[0x1D] - b2[0x1A]) * costab[2]; + b1[0x1B] = b2[0x1B] + b2[0x1C]; + b1[0x1C] = (b2[0x1C] - b2[0x1B]) * costab[3]; + } + + { + register real const cos0 = pnts[3][0]; + register real const cos1 = pnts[3][1]; + + b2[0x00] = b1[0x00] + b1[0x03]; + b2[0x03] = (b1[0x00] - b1[0x03]) * cos0; + b2[0x01] = b1[0x01] + b1[0x02]; + b2[0x02] = (b1[0x01] - b1[0x02]) * cos1; + + b2[0x04] = b1[0x04] + b1[0x07]; + b2[0x07] = (b1[0x07] - b1[0x04]) * cos0; + b2[0x05] = b1[0x05] + b1[0x06]; + b2[0x06] = (b1[0x06] - b1[0x05]) * cos1; + + b2[0x08] = b1[0x08] + b1[0x0B]; + b2[0x0B] = (b1[0x08] - b1[0x0B]) * cos0; + b2[0x09] = b1[0x09] + b1[0x0A]; + b2[0x0A] = (b1[0x09] - b1[0x0A]) * cos1; + + b2[0x0C] = b1[0x0C] + b1[0x0F]; + b2[0x0F] = (b1[0x0F] - b1[0x0C]) * cos0; + b2[0x0D] = b1[0x0D] + b1[0x0E]; + b2[0x0E] = (b1[0x0E] - b1[0x0D]) * cos1; + + b2[0x10] = b1[0x10] + b1[0x13]; + b2[0x13] = (b1[0x10] - b1[0x13]) * cos0; + b2[0x11] = b1[0x11] + b1[0x12]; + b2[0x12] = (b1[0x11] - b1[0x12]) * cos1; + + b2[0x14] = b1[0x14] + b1[0x17]; + b2[0x17] = (b1[0x17] - b1[0x14]) * cos0; + b2[0x15] = b1[0x15] + b1[0x16]; + b2[0x16] = (b1[0x16] - b1[0x15]) * cos1; + + b2[0x18] = b1[0x18] + b1[0x1B]; + b2[0x1B] = (b1[0x18] - b1[0x1B]) * cos0; + b2[0x19] = b1[0x19] + b1[0x1A]; + b2[0x1A] = (b1[0x19] - b1[0x1A]) * cos1; + + b2[0x1C] = b1[0x1C] + b1[0x1F]; + b2[0x1F] = (b1[0x1F] - b1[0x1C]) * cos0; + b2[0x1D] = b1[0x1D] + b1[0x1E]; + b2[0x1E] = (b1[0x1E] - b1[0x1D]) * cos1; + } + + { + register real const cos0 = pnts[4][0]; + + b1[0x00] = b2[0x00] + b2[0x01]; + b1[0x01] = (b2[0x00] - b2[0x01]) * cos0; + b1[0x02] = b2[0x02] + b2[0x03]; + b1[0x03] = (b2[0x03] - b2[0x02]) * cos0; + b1[0x02] += b1[0x03]; + + b1[0x04] = b2[0x04] + b2[0x05]; + b1[0x05] = (b2[0x04] - b2[0x05]) * cos0; + b1[0x06] = b2[0x06] + b2[0x07]; + b1[0x07] = (b2[0x07] - b2[0x06]) * cos0; + b1[0x06] += b1[0x07]; + b1[0x04] += b1[0x06]; + b1[0x06] += b1[0x05]; + b1[0x05] += b1[0x07]; + + b1[0x08] = b2[0x08] + b2[0x09]; + b1[0x09] = (b2[0x08] - b2[0x09]) * cos0; + b1[0x0A] = b2[0x0A] + b2[0x0B]; + b1[0x0B] = (b2[0x0B] - b2[0x0A]) * cos0; + b1[0x0A] += b1[0x0B]; + + b1[0x0C] = b2[0x0C] + b2[0x0D]; + b1[0x0D] = (b2[0x0C] - b2[0x0D]) * cos0; + b1[0x0E] = b2[0x0E] + b2[0x0F]; + b1[0x0F] = (b2[0x0F] - b2[0x0E]) * cos0; + b1[0x0E] += b1[0x0F]; + b1[0x0C] += b1[0x0E]; + b1[0x0E] += b1[0x0D]; + b1[0x0D] += b1[0x0F]; + + b1[0x10] = b2[0x10] + b2[0x11]; + b1[0x11] = (b2[0x10] - b2[0x11]) * cos0; + b1[0x12] = b2[0x12] + b2[0x13]; + b1[0x13] = (b2[0x13] - b2[0x12]) * cos0; + b1[0x12] += b1[0x13]; + + b1[0x14] = b2[0x14] + b2[0x15]; + b1[0x15] = (b2[0x14] - b2[0x15]) * cos0; + b1[0x16] = b2[0x16] + b2[0x17]; + b1[0x17] = (b2[0x17] - b2[0x16]) * cos0; + b1[0x16] += b1[0x17]; + b1[0x14] += b1[0x16]; + b1[0x16] += b1[0x15]; + b1[0x15] += b1[0x17]; + + b1[0x18] = b2[0x18] + b2[0x19]; + b1[0x19] = (b2[0x18] - b2[0x19]) * cos0; + b1[0x1A] = b2[0x1A] + b2[0x1B]; + b1[0x1B] = (b2[0x1B] - b2[0x1A]) * cos0; + b1[0x1A] += b1[0x1B]; + + b1[0x1C] = b2[0x1C] + b2[0x1D]; + b1[0x1D] = (b2[0x1C] - b2[0x1D]) * cos0; + b1[0x1E] = b2[0x1E] + b2[0x1F]; + b1[0x1F] = (b2[0x1F] - b2[0x1E]) * cos0; + b1[0x1E] += b1[0x1F]; + b1[0x1C] += b1[0x1E]; + b1[0x1E] += b1[0x1D]; + b1[0x1D] += b1[0x1F]; + } + + out0[0x10*16] = b1[0x00]; + out0[0x10*12] = b1[0x04]; + out0[0x10* 8] = b1[0x02]; + out0[0x10* 4] = b1[0x06]; + out0[0x10* 0] = b1[0x01]; + out1[0x10* 0] = b1[0x01]; + out1[0x10* 4] = b1[0x05]; + out1[0x10* 8] = b1[0x03]; + out1[0x10*12] = b1[0x07]; + +#if 1 + out0[0x10*14] = b1[0x08] + b1[0x0C]; + out0[0x10*10] = b1[0x0C] + b1[0x0a]; + out0[0x10* 6] = b1[0x0A] + b1[0x0E]; + out0[0x10* 2] = b1[0x0E] + b1[0x09]; + out1[0x10* 2] = b1[0x09] + b1[0x0D]; + out1[0x10* 6] = b1[0x0D] + b1[0x0B]; + out1[0x10*10] = b1[0x0B] + b1[0x0F]; + out1[0x10*14] = b1[0x0F]; +#else + b1[0x08] += b1[0x0C]; + out0[0x10*14] = b1[0x08]; + b1[0x0C] += b1[0x0a]; + out0[0x10*10] = b1[0x0C]; + b1[0x0A] += b1[0x0E]; + out0[0x10* 6] = b1[0x0A]; + b1[0x0E] += b1[0x09]; + out0[0x10* 2] = b1[0x0E]; + b1[0x09] += b1[0x0D]; + out1[0x10* 2] = b1[0x09]; + b1[0x0D] += b1[0x0B]; + out1[0x10* 6] = b1[0x0D]; + b1[0x0B] += b1[0x0F]; + out1[0x10*10] = b1[0x0B]; + out1[0x10*14] = b1[0x0F]; +#endif + + { + real tmp; + tmp = b1[0x18] + b1[0x1C]; + out0[0x10*15] = tmp + b1[0x10]; + out0[0x10*13] = tmp + b1[0x14]; + tmp = b1[0x1C] + b1[0x1A]; + out0[0x10*11] = tmp + b1[0x14]; + out0[0x10* 9] = tmp + b1[0x12]; + tmp = b1[0x1A] + b1[0x1E]; + out0[0x10* 7] = tmp + b1[0x12]; + out0[0x10* 5] = tmp + b1[0x16]; + tmp = b1[0x1E] + b1[0x19]; + out0[0x10* 3] = tmp + b1[0x16]; + out0[0x10* 1] = tmp + b1[0x11]; + tmp = b1[0x19] + b1[0x1D]; + out1[0x10* 1] = tmp + b1[0x11]; + out1[0x10* 3] = tmp + b1[0x15]; + tmp = b1[0x1D] + b1[0x1B]; + out1[0x10* 5] = tmp + b1[0x15]; + out1[0x10* 7] = tmp + b1[0x13]; + tmp = b1[0x1B] + b1[0x1F]; + out1[0x10* 9] = tmp + b1[0x13]; + out1[0x10*11] = tmp + b1[0x17]; + out1[0x10*13] = b1[0x17] + b1[0x1F]; + out1[0x10*15] = b1[0x1F]; + } +} + +/* + * the call via dct64 is a trick to force GCC to use + * (new) registers for the b1,b2 pointer to the bufs[xx] field + */ +void dct64(real *a,real *b,real *c) +{ + real bufs[0x40]; + dct64_1(a,b,bufs,bufs+0x20,c); +} + Added: freeswitch/trunk/src/mod/formats/mod_shout/decode_i386.c ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/decode_i386.c Mon Mar 12 22:02:28 2007 @@ -0,0 +1,153 @@ +/* + * Mpeg Layer-1,2,3 audio decoder + * ------------------------------ + * copyright (c) 1995,1996,1997 by Michael Hipp, All rights reserved. + * See also 'README' + * + * slighlty optimized for machines without autoincrement/decrement. + * The performance is highly compiler dependend. Maybe + * the decode.c version for 'normal' processor may be faster + * even for Intel processors. + */ + +#include <stdlib.h> +#include <math.h> +#include <string.h> + + +#include "mpglib.h" + + + + /* old WRITE_SAMPLE */ +#define WRITE_SAMPLE(samples,sum,clip) \ + if( (sum) > 32767.0) { *(samples) = 0x7fff; (clip)++; } \ + else if( (sum) < -32768.0) { *(samples) = -0x8000; (clip)++; } \ + else { *(samples) = sum; } + +int synth_1to1_mono(struct mpstr *mp,real *bandPtr,unsigned char *samples,int *pnt) +{ + short samples_tmp[64]; + short *tmp1 = samples_tmp; + int i,ret; + int pnt1 = 0; + + ret = synth_1to1(mp,bandPtr,0,(unsigned char *) samples_tmp,&pnt1); + samples += *pnt; + + for(i=0;i<32;i++) { + *( (short *) samples) = *tmp1; + samples += 2; + tmp1 += 2; + } + *pnt += 64; + + return ret; +} + + +int synth_1to1(struct mpstr *mp, real *bandPtr,int channel,unsigned char *out,int *pnt) +{ + static const int step = 2; + int bo; + short *samples = (short *) (out + *pnt); + + real *b0,(*buf)[0x110]; + int clip = 0; + int bo1; + + bo = mp->synth_bo; + + if(!channel) { + bo--; + bo &= 0xf; + buf = mp->synth_buffs[0]; + } + else { + samples++; + buf = mp->synth_buffs[1]; + } + + if(bo & 0x1) { + b0 = buf[0]; + bo1 = bo; + dct64(buf[1]+((bo+1)&0xf),buf[0]+bo,bandPtr); + } + else { + b0 = buf[1]; + bo1 = bo+1; + dct64(buf[0]+bo,buf[1]+bo+1,bandPtr); + } + + mp->synth_bo = bo; + + { + register int j; + real *window = decwin + 16 - bo1; + + for (j=16;j;j--,b0+=0x10,window+=0x20,samples+=step) + { + real sum; + sum = window[0x0] * b0[0x0]; + sum -= window[0x1] * b0[0x1]; + sum += window[0x2] * b0[0x2]; + sum -= window[0x3] * b0[0x3]; + sum += window[0x4] * b0[0x4]; + sum -= window[0x5] * b0[0x5]; + sum += window[0x6] * b0[0x6]; + sum -= window[0x7] * b0[0x7]; + sum += window[0x8] * b0[0x8]; + sum -= window[0x9] * b0[0x9]; + sum += window[0xA] * b0[0xA]; + sum -= window[0xB] * b0[0xB]; + sum += window[0xC] * b0[0xC]; + sum -= window[0xD] * b0[0xD]; + sum += window[0xE] * b0[0xE]; + sum -= window[0xF] * b0[0xF]; + + WRITE_SAMPLE(samples,sum,clip); + } + + { + real sum; + sum = window[0x0] * b0[0x0]; + sum += window[0x2] * b0[0x2]; + sum += window[0x4] * b0[0x4]; + sum += window[0x6] * b0[0x6]; + sum += window[0x8] * b0[0x8]; + sum += window[0xA] * b0[0xA]; + sum += window[0xC] * b0[0xC]; + sum += window[0xE] * b0[0xE]; + WRITE_SAMPLE(samples,sum,clip); + b0-=0x10,window-=0x20,samples+=step; + } + window += bo1<<1; + + for (j=15;j;j--,b0-=0x10,window-=0x20,samples+=step) + { + real sum; + sum = -window[-0x1] * b0[0x0]; + sum -= window[-0x2] * b0[0x1]; + sum -= window[-0x3] * b0[0x2]; + sum -= window[-0x4] * b0[0x3]; + sum -= window[-0x5] * b0[0x4]; + sum -= window[-0x6] * b0[0x5]; + sum -= window[-0x7] * b0[0x6]; + sum -= window[-0x8] * b0[0x7]; + sum -= window[-0x9] * b0[0x8]; + sum -= window[-0xA] * b0[0x9]; + sum -= window[-0xB] * b0[0xA]; + sum -= window[-0xC] * b0[0xB]; + sum -= window[-0xD] * b0[0xC]; + sum -= window[-0xE] * b0[0xD]; + sum -= window[-0xF] * b0[0xE]; + sum -= window[-0x0] * b0[0xF]; + + WRITE_SAMPLE(samples,sum,clip); + } + } + *pnt += 128; + + return clip; +} + Added: freeswitch/trunk/src/mod/formats/mod_shout/decode_ntom.c ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/decode_ntom.c Mon Mar 12 22:02:28 2007 @@ -0,0 +1,218 @@ +/* + * Mpeg Layer-1,2,3 audio decoder + * ------------------------------ + * copyright (c) 1995,1996,1997 by Michael Hipp, All rights reserved. + * See also 'README' + * + * N->M down/up sampling. Not optimized for speed. + */ + + +#include <stdlib.h> +#include <math.h> +#include <string.h> + +#include "mpg123.h" +#include "mpglib.h" + +#define WRITE_SAMPLE(samples,sum,clip) \ + if( (sum) > 32767.0) { *(samples) = 0x7fff; (clip)++; } \ + else if( (sum) < -32768.0) { *(samples) = -0x8000; (clip)++; } \ + else { *(samples) = sum; } + +#define NTOM_MUL (32768) +static unsigned long ntom_val[2] = { NTOM_MUL>>1,NTOM_MUL>>1 }; +static unsigned long ntom_step = NTOM_MUL; + + +int synth_ntom_set_step(long m,long n) +{ + if(param.verbose > 1) + //printf("Init rate converter: %ld->%ld\n",m,n); + + if(n >= 96000 || m >= 96000 || m == 0 || n == 0) { + //printf("NtoM converter: illegal rates\n"); + return (1); + } + + n *= NTOM_MUL; + ntom_step = n / m; + + if(ntom_step > 8*NTOM_MUL) { + //printf("max. 1:8 conversion allowed!\n"); + return (1); + } + + ntom_val[0] = ntom_val[1] = NTOM_MUL>>1; + + return (0); + +} + + +int synth_ntom_mono (struct mpstr *mp, real *bandPtr,unsigned char *samples,int *pnt) +{ + short samples_tmp[8*64]; + short *tmp1 = samples_tmp; + int i,ret; + int pnt1 = 0; + + ret = synth_ntom(mp, bandPtr,0,(unsigned char *) samples_tmp,&pnt1); + samples += *pnt; + + for(i=0;i<(pnt1>>2);i++) { + *( (short *)samples) = *tmp1; + samples += 2; + tmp1 += 2; + } + *pnt += pnt1 >> 1; + + return ret; +} + + + +int synth_ntom(struct mpstr *mp, real *bandPtr,int channel,unsigned char *out,int *pnt) +{ + static const int step = 2; + int bo; + short *samples = (short *) (out + *pnt); + + real *b0,(*buf)[0x110]; + int clip = 0; + int bo1; + int ntom; + + bo = mp->synth_bo; + + if(!channel) { + bo--; + bo &= 0xf; + buf = mp->synth_buffs[0]; + ntom = ntom_val[1] = ntom_val[0]; + } + else { + samples++; + out += 2; /* to compute the right *pnt value */ + buf = mp->synth_buffs[1]; + ntom = ntom_val[1]; + } + + if(bo & 0x1) { + b0 = buf[0]; + bo1 = bo; + dct64(buf[1]+((bo+1)&0xf),buf[0]+bo,bandPtr); + } + else { + b0 = buf[1]; + bo1 = bo+1; + dct64(buf[0]+bo,buf[1]+bo+1,bandPtr); + } + + mp->synth_bo = bo; + + { + register int j; + real *window = (mp->decwin) + 16 - bo1; + + for (j=16;j;j--,window+=0x10) + { + real sum; + + ntom += ntom_step; + if(ntom < NTOM_MUL) { + window += 16; + b0 += 16; + continue; + } + + sum = *window++ * *b0++; + sum -= *window++ * *b0++; + sum += *window++ * *b0++; + sum -= *window++ * *b0++; + sum += *window++ * *b0++; + sum -= *window++ * *b0++; + sum += *window++ * *b0++; + sum -= *window++ * *b0++; + sum += *window++ * *b0++; + sum -= *window++ * *b0++; + sum += *window++ * *b0++; + sum -= *window++ * *b0++; + sum += *window++ * *b0++; + sum -= *window++ * *b0++; + sum += *window++ * *b0++; + sum -= *window++ * *b0++; + + while(ntom >= NTOM_MUL) { + WRITE_SAMPLE(samples,sum,clip); + samples += step; + ntom -= NTOM_MUL; + } + } + + ntom += ntom_step; + if(ntom >= NTOM_MUL) + { + real sum; + sum = window[0x0] * b0[0x0]; + sum += window[0x2] * b0[0x2]; + sum += window[0x4] * b0[0x4]; + sum += window[0x6] * b0[0x6]; + sum += window[0x8] * b0[0x8]; + sum += window[0xA] * b0[0xA]; + sum += window[0xC] * b0[0xC]; + sum += window[0xE] * b0[0xE]; + + while(ntom >= NTOM_MUL) { + WRITE_SAMPLE(samples,sum,clip); + samples += step; + ntom -= NTOM_MUL; + } + } + + b0-=0x10,window-=0x20; + window += bo1<<1; + + for (j=15;j;j--,b0-=0x20,window-=0x10) + { + real sum; + + ntom += ntom_step; + if(ntom < NTOM_MUL) { + window -= 16; + b0 += 16; + continue; + } + + sum = -*(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + sum -= *(--window) * *b0++; + + while(ntom >= NTOM_MUL) { + WRITE_SAMPLE(samples,sum,clip); + samples += step; + ntom -= NTOM_MUL; + } + } + } + + ntom_val[channel] = ntom; + *pnt = ((unsigned char *) samples - out); + + return clip; +} + + Added: freeswitch/trunk/src/mod/formats/mod_shout/huffman.h ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/huffman.h Mon Mar 12 22:02:28 2007 @@ -0,0 +1,332 @@ +/* + * huffman tables ... recalcualted to work with my optimzed + * decoder scheme (MH) + * + * probably we could save a few bytes of memory, because the + * smaller tables are often the part of a bigger table + */ + +struct newhuff +{ + unsigned int linbits; + short *table; +}; + +static short tab0[] = +{ + 0 +}; + +static short tab1[] = +{ + -5, -3, -1, 17, 1, 16, 0 +}; + +static short tab2[] = +{ + -15, -11, -9, -5, -3, -1, 34, 2, 18, -1, 33, 32, 17, -1, 1, + 16, 0 +}; + +static short tab3[] = +{ + -13, -11, -9, -5, -3, -1, 34, 2, 18, -1, 33, 32, 16, 17, -1, + 1, 0 +}; + +static short tab5[] = +{ + -29, -25, -23, -15, -7, -5, -3, -1, 51, 35, 50, 49, -3, -1, 19, + 3, -1, 48, 34, -3, -1, 18, 33, -1, 2, 32, 17, -1, 1, 16, + 0 +}; + +static short tab6[] = +{ + -25, -19, -13, -9, -5, -3, -1, 51, 3, 35, -1, 50, 48, -1, 19, + 49, -3, -1, 34, 2, 18, -3, -1, 33, 32, 1, -1, 17, -1, 16, + 0 +}; + +static short tab7[] = +{ + -69, -65, -57, -39, -29, -17, -11, -7, -3, -1, 85, 69, -1, 84, 83, + -1, 53, 68, -3, -1, 37, 82, 21, -5, -1, 81, -1, 5, 52, -1, + 80, -1, 67, 51, -5, -3, -1, 36, 66, 20, -1, 65, 64, -11, -7, + -3, -1, 4, 35, -1, 50, 3, -1, 19, 49, -3, -1, 48, 34, 18, + -5, -1, 33, -1, 2, 32, 17, -1, 1, 16, 0 +}; + +static short tab8[] = +{ + -65, -63, -59, -45, -31, -19, -13, -7, -5, -3, -1, 85, 84, 69, 83, + -3, -1, 53, 68, 37, -3, -1, 82, 5, 21, -5, -1, 81, -1, 52, + 67, -3, -1, 80, 51, 36, -5, -3, -1, 66, 20, 65, -3, -1, 4, + 64, -1, 35, 50, -9, -7, -3, -1, 19, 49, -1, 3, 48, 34, -1, + 2, 32, -1, 18, 33, 17, -3, -1, 1, 16, 0 +}; + +static short tab9[] = +{ + -63, -53, -41, -29, -19, -11, -5, -3, -1, 85, 69, 53, -1, 83, -1, + 84, 5, -3, -1, 68, 37, -1, 82, 21, -3, -1, 81, 52, -1, 67, + -1, 80, 4, -7, -3, -1, 36, 66, -1, 51, 64, -1, 20, 65, -5, + -3, -1, 35, 50, 19, -1, 49, -1, 3, 48, -5, -3, -1, 34, 2, + 18, -1, 33, 32, -3, -1, 17, 1, -1, 16, 0 +}; + +static short tab10[] = +{ +-125,-121,-111, -83, -55, -35, -21, -13, -7, -3, -1, 119, 103, -1, 118, + 87, -3, -1, 117, 102, 71, -3, -1, 116, 86, -1, 101, 55, -9, -3, + -1, 115, 70, -3, -1, 85, 84, 99, -1, 39, 114, -11, -5, -3, -1, + 100, 7, 112, -1, 98, -1, 69, 53, -5, -1, 6, -1, 83, 68, 23, + -17, -5, -1, 113, -1, 54, 38, -5, -3, -1, 37, 82, 21, -1, 81, + -1, 52, 67, -3, -1, 22, 97, -1, 96, -1, 5, 80, -19, -11, -7, + -3, -1, 36, 66, -1, 51, 4, -1, 20, 65, -3, -1, 64, 35, -1, + 50, 3, -3, -1, 19, 49, -1, 48, 34, -7, -3, -1, 18, 33, -1, + 2, 32, 17, -1, 1, 16, 0 +}; + +static short tab11[] = +{ +-121,-113, -89, -59, -43, -27, -17, -7, -3, -1, 119, 103, -1, 118, 117, + -3, -1, 102, 71, -1, 116, -1, 87, 85, -5, -3, -1, 86, 101, 55, + -1, 115, 70, -9, -7, -3, -1, 69, 84, -1, 53, 83, 39, -1, 114, + -1, 100, 7, -5, -1, 113, -1, 23, 112, -3, -1, 54, 99, -1, 96, + -1, 68, 37, -13, -7, -5, -3, -1, 82, 5, 21, 98, -3, -1, 38, + 6, 22, -5, -1, 97, -1, 81, 52, -5, -1, 80, -1, 67, 51, -1, + 36, 66, -15, -11, -7, -3, -1, 20, 65, -1, 4, 64, -1, 35, 50, + -1, 19, 49, -5, -3, -1, 3, 48, 34, 33, -5, -1, 18, -1, 2, + 32, 17, -3, -1, 1, 16, 0 +}; + +static short tab12[] = +{ +-115, -99, -73, -45, -27, -17, -9, -5, -3, -1, 119, 103, 118, -1, 87, + 117, -3, -1, 102, 71, -1, 116, 101, -3, -1, 86, 55, -3, -1, 115, + 85, 39, -7, -3, -1, 114, 70, -1, 100, 23, -5, -1, 113, -1, 7, + 112, -1, 54, 99, -13, -9, -3, -1, 69, 84, -1, 68, -1, 6, 5, + -1, 38, 98, -5, -1, 97, -1, 22, 96, -3, -1, 53, 83, -1, 37, + 82, -17, -7, -3, -1, 21, 81, -1, 52, 67, -5, -3, -1, 80, 4, + 36, -1, 66, 20, -3, -1, 51, 65, -1, 35, 50, -11, -7, -5, -3, + -1, 64, 3, 48, 19, -1, 49, 34, -1, 18, 33, -7, -5, -3, -1, + 2, 32, 0, 17, -1, 1, 16 +}; + +static short tab13[] = +{ +-509,-503,-475,-405,-333,-265,-205,-153,-115, -83, -53, -35, -21, -13, -9, + -7, -5, -3, -1, 254, 252, 253, 237, 255, -1, 239, 223, -3, -1, 238, + 207, -1, 222, 191, -9, -3, -1, 251, 206, -1, 220, -1, 175, 233, -1, + 236, 221, -9, -5, -3, -1, 250, 205, 190, -1, 235, 159, -3, -1, 249, + 234, -1, 189, 219, -17, -9, -3, -1, 143, 248, -1, 204, -1, 174, 158, + -5, -1, 142, -1, 127, 126, 247, -5, -1, 218, -1, 173, 188, -3, -1, + 203, 246, 111, -15, -7, -3, -1, 232, 95, -1, 157, 217, -3, -1, 245, + 231, -1, 172, 187, -9, -3, -1, 79, 244, -3, -1, 202, 230, 243, -1, + 63, -1, 141, 216, -21, -9, -3, -1, 47, 242, -3, -1, 110, 156, 15, + -5, -3, -1, 201, 94, 171, -3, -1, 125, 215, 78, -11, -5, -3, -1, + 200, 214, 62, -1, 185, -1, 155, 170, -1, 31, 241, -23, -13, -5, -1, + 240, -1, 186, 229, -3, -1, 228, 140, -1, 109, 227, -5, -1, 226, -1, + 46, 14, -1, 30, 225, -15, -7, -3, -1, 224, 93, -1, 213, 124, -3, + -1, 199, 77, -1, 139, 184, -7, -3, -1, 212, 154, -1, 169, 108, -1, + 198, 61, -37, -21, -9, -5, -3, -1, 211, 123, 45, -1, 210, 29, -5, + -1, 183, -1, 92, 197, -3, -1, 153, 122, 195, -7, -5, -3, -1, 167, + 151, 75, 209, -3, -1, 13, 208, -1, 138, 168, -11, -7, -3, -1, 76, + 196, -1, 107, 182, -1, 60, 44, -3, -1, 194, 91, -3, -1, 181, 137, + 28, -43, -23, -11, -5, -1, 193, -1, 152, 12, -1, 192, -1, 180, 106, + -5, -3, -1, 166, 121, 59, -1, 179, -1, 136, 90, -11, -5, -1, 43, + -1, 165, 105, -1, 164, -1, 120, 135, -5, -1, 148, -1, 119, 118, 178, + -11, -3, -1, 27, 177, -3, -1, 11, 176, -1, 150, 74, -7, -3, -1, + 58, 163, -1, 89, 149, -1, 42, 162, -47, -23, -9, -3, -1, 26, 161, + -3, -1, 10, 104, 160, -5, -3, -1, 134, 73, 147, -3, -1, 57, 88, + -1, 133, 103, -9, -3, -1, 41, 146, -3, -1, 87, 117, 56, -5, -1, + 131, -1, 102, 71, -3, -1, 116, 86, -1, 101, 115, -11, -3, -1, 25, + 145, -3, -1, 9, 144, -1, 72, 132, -7, -5, -1, 114, -1, 70, 100, + 40, -1, 130, 24, -41, -27, -11, -5, -3, -1, 55, 39, 23, -1, 113, + -1, 85, 7, -7, -3, -1, 112, 54, -1, 99, 69, -3, -1, 84, 38, + -1, 98, 53, -5, -1, 129, -1, 8, 128, -3, -1, 22, 97, -1, 6, + 96, -13, -9, -5, -3, -1, 83, 68, 37, -1, 82, 5, -1, 21, 81, + -7, -3, -1, 52, 67, -1, 80, 36, -3, -1, 66, 51, 20, -19, -11, + -5, -1, 65, -1, 4, 64, -3, -1, 35, 50, 19, -3, -1, 49, 3, + -1, 48, 34, -3, -1, 18, 33, -1, 2, 32, -3, -1, 17, 1, 16, + 0 +}; + +static short tab15[] = +{ +-495,-445,-355,-263,-183,-115, -77, -43, -27, -13, -7, -3, -1, 255, 239, + -1, 254, 223, -1, 238, -1, 253, 207, -7, -3, -1, 252, 222, -1, 237, + 191, -1, 251, -1, 206, 236, -7, -3, -1, 221, 175, -1, 250, 190, -3, + -1, 235, 205, -1, 220, 159, -15, -7, -3, -1, 249, 234, -1, 189, 219, + -3, -1, 143, 248, -1, 204, 158, -7, -3, -1, 233, 127, -1, 247, 173, + -3, -1, 218, 188, -1, 111, -1, 174, 15, -19, -11, -3, -1, 203, 246, + -3, -1, 142, 232, -1, 95, 157, -3, -1, 245, 126, -1, 231, 172, -9, + -3, -1, 202, 187, -3, -1, 217, 141, 79, -3, -1, 244, 63, -1, 243, + 216, -33, -17, -9, -3, -1, 230, 47, -1, 242, -1, 110, 240, -3, -1, + 31, 241, -1, 156, 201, -7, -3, -1, 94, 171, -1, 186, 229, -3, -1, + 125, 215, -1, 78, 228, -15, -7, -3, -1, 140, 200, -1, 62, 109, -3, + -1, 214, 227, -1, 155, 185, -7, -3, -1, 46, 170, -1, 226, 30, -5, + -1, 225, -1, 14, 224, -1, 93, 213, -45, -25, -13, -7, -3, -1, 124, + 199, -1, 77, 139, -1, 212, -1, 184, 154, -7, -3, -1, 169, 108, -1, + 198, 61, -1, 211, 210, -9, -5, -3, -1, 45, 13, 29, -1, 123, 183, + -5, -1, 209, -1, 92, 208, -1, 197, 138, -17, -7, -3, -1, 168, 76, + -1, 196, 107, -5, -1, 182, -1, 153, 12, -1, 60, 195, -9, -3, -1, + 122, 167, -1, 166, -1, 192, 11, -1, 194, -1, 44, 91, -55, -29, -15, + -7, -3, -1, 181, 28, -1, 137, 152, -3, -1, 193, 75, -1, 180, 106, + -5, -3, -1, 59, 121, 179, -3, -1, 151, 136, -1, 43, 90, -11, -5, + -1, 178, -1, 165, 27, -1, 177, -1, 176, 105, -7, -3, -1, 150, 74, + -1, 164, 120, -3, -1, 135, 58, 163, -17, -7, -3, -1, 89, 149, -1, + 42, 162, -3, -1, 26, 161, -3, -1, 10, 160, 104, -7, -3, -1, 134, + 73, -1, 148, 57, -5, -1, 147, -1, 119, 9, -1, 88, 133, -53, -29, + -13, -7, -3, -1, 41, 103, -1, 118, 146, -1, 145, -1, 25, 144, -7, + -3, -1, 72, 132, -1, 87, 117, -3, -1, 56, 131, -1, 102, 71, -7, + -3, -1, 40, 130, -1, 24, 129, -7, -3, -1, 116, 8, -1, 128, 86, + -3, -1, 101, 55, -1, 115, 70, -17, -7, -3, -1, 39, 114, -1, 100, + 23, -3, -1, 85, 113, -3, -1, 7, 112, 54, -7, -3, -1, 99, 69, + -1, 84, 38, -3, -1, 98, 22, -3, -1, 6, 96, 53, -33, -19, -9, + -5, -1, 97, -1, 83, 68, -1, 37, 82, -3, -1, 21, 81, -3, -1, + 5, 80, 52, -7, -3, -1, 67, 36, -1, 66, 51, -1, 65, -1, 20, + 4, -9, -3, -1, 35, 50, -3, -1, 64, 3, 19, -3, -1, 49, 48, + 34, -9, -7, -3, -1, 18, 33, -1, 2, 32, 17, -3, -1, 1, 16, + 0 +}; + +static short tab16[] = +{ +-509,-503,-461,-323,-103, -37, -27, -15, -7, -3, -1, 239, 254, -1, 223, + 253, -3, -1, 207, 252, -1, 191, 251, -5, -1, 175, -1, 250, 159, -3, + -1, 249, 248, 143, -7, -3, -1, 127, 247, -1, 111, 246, 255, -9, -5, + -3, -1, 95, 245, 79, -1, 244, 243, -53, -1, 240, -1, 63, -29, -19, + -13, -7, -5, -1, 206, -1, 236, 221, 222, -1, 233, -1, 234, 217, -1, + 238, -1, 237, 235, -3, -1, 190, 205, -3, -1, 220, 219, 174, -11, -5, + -1, 204, -1, 173, 218, -3, -1, 126, 172, 202, -5, -3, -1, 201, 125, + 94, 189, 242, -93, -5, -3, -1, 47, 15, 31, -1, 241, -49, -25, -13, + -5, -1, 158, -1, 188, 203, -3, -1, 142, 232, -1, 157, 231, -7, -3, + -1, 187, 141, -1, 216, 110, -1, 230, 156, -13, -7, -3, -1, 171, 186, + -1, 229, 215, -1, 78, -1, 228, 140, -3, -1, 200, 62, -1, 109, -1, + 214, 155, -19, -11, -5, -3, -1, 185, 170, 225, -1, 212, -1, 184, 169, + -5, -1, 123, -1, 183, 208, 227, -7, -3, -1, 14, 224, -1, 93, 213, + -3, -1, 124, 199, -1, 77, 139, -75, -45, -27, -13, -7, -3, -1, 154, + 108, -1, 198, 61, -3, -1, 92, 197, 13, -7, -3, -1, 138, 168, -1, + 153, 76, -3, -1, 182, 122, 60, -11, -5, -3, -1, 91, 137, 28, -1, + 192, -1, 152, 121, -1, 226, -1, 46, 30, -15, -7, -3, -1, 211, 45, + -1, 210, 209, -5, -1, 59, -1, 151, 136, 29, -7, -3, -1, 196, 107, + -1, 195, 167, -1, 44, -1, 194, 181, -23, -13, -7, -3, -1, 193, 12, + -1, 75, 180, -3, -1, 106, 166, 179, -5, -3, -1, 90, 165, 43, -1, + 178, 27, -13, -5, -1, 177, -1, 11, 176, -3, -1, 105, 150, -1, 74, + 164, -5, -3, -1, 120, 135, 163, -3, -1, 58, 89, 42, -97, -57, -33, + -19, -11, -5, -3, -1, 149, 104, 161, -3, -1, 134, 119, 148, -5, -3, + -1, 73, 87, 103, 162, -5, -1, 26, -1, 10, 160, -3, -1, 57, 147, + -1, 88, 133, -9, -3, -1, 41, 146, -3, -1, 118, 9, 25, -5, -1, + 145, -1, 144, 72, -3, -1, 132, 117, -1, 56, 131, -21, -11, -5, -3, + -1, 102, 40, 130, -3, -1, 71, 116, 24, -3, -1, 129, 128, -3, -1, + 8, 86, 55, -9, -5, -1, 115, -1, 101, 70, -1, 39, 114, -5, -3, + -1, 100, 85, 7, 23, -23, -13, -5, -1, 113, -1, 112, 54, -3, -1, + 99, 69, -1, 84, 38, -3, -1, 98, 22, -1, 97, -1, 6, 96, -9, + -5, -1, 83, -1, 53, 68, -1, 37, 82, -1, 81, -1, 21, 5, -33, + -23, -13, -7, -3, -1, 52, 67, -1, 80, 36, -3, -1, 66, 51, 20, + -5, -1, 65, -1, 4, 64, -1, 35, 50, -3, -1, 19, 49, -3, -1, + 3, 48, 34, -3, -1, 18, 33, -1, 2, 32, -3, -1, 17, 1, 16, + 0 +}; + +static short tab24[] = +{ +-451,-117, -43, -25, -15, -7, -3, -1, 239, 254, -1, 223, 253, -3, -1, + 207, 252, -1, 191, 251, -5, -1, 250, -1, 175, 159, -1, 249, 248, -9, + -5, -3, -1, 143, 127, 247, -1, 111, 246, -3, -1, 95, 245, -1, 79, + 244, -71, -7, -3, -1, 63, 243, -1, 47, 242, -5, -1, 241, -1, 31, + 240, -25, -9, -1, 15, -3, -1, 238, 222, -1, 237, 206, -7, -3, -1, + 236, 221, -1, 190, 235, -3, -1, 205, 220, -1, 174, 234, -15, -7, -3, + -1, 189, 219, -1, 204, 158, -3, -1, 233, 173, -1, 218, 188, -7, -3, + -1, 203, 142, -1, 232, 157, -3, -1, 217, 126, -1, 231, 172, 255,-235, +-143, -77, -45, -25, -15, -7, -3, -1, 202, 187, -1, 141, 216, -5, -3, + -1, 14, 224, 13, 230, -5, -3, -1, 110, 156, 201, -1, 94, 186, -9, + -5, -1, 229, -1, 171, 125, -1, 215, 228, -3, -1, 140, 200, -3, -1, + 78, 46, 62, -15, -7, -3, -1, 109, 214, -1, 227, 155, -3, -1, 185, + 170, -1, 226, 30, -7, -3, -1, 225, 93, -1, 213, 124, -3, -1, 199, + 77, -1, 139, 184, -31, -15, -7, -3, -1, 212, 154, -1, 169, 108, -3, + -1, 198, 61, -1, 211, 45, -7, -3, -1, 210, 29, -1, 123, 183, -3, + -1, 209, 92, -1, 197, 138, -17, -7, -3, -1, 168, 153, -1, 76, 196, + -3, -1, 107, 182, -3, -1, 208, 12, 60, -7, -3, -1, 195, 122, -1, + 167, 44, -3, -1, 194, 91, -1, 181, 28, -57, -35, -19, -7, -3, -1, + 137, 152, -1, 193, 75, -5, -3, -1, 192, 11, 59, -3, -1, 176, 10, + 26, -5, -1, 180, -1, 106, 166, -3, -1, 121, 151, -3, -1, 160, 9, + 144, -9, -3, -1, 179, 136, -3, -1, 43, 90, 178, -7, -3, -1, 165, + 27, -1, 177, 105, -1, 150, 164, -17, -9, -5, -3, -1, 74, 120, 135, + -1, 58, 163, -3, -1, 89, 149, -1, 42, 162, -7, -3, -1, 161, 104, + -1, 134, 119, -3, -1, 73, 148, -1, 57, 147, -63, -31, -15, -7, -3, + -1, 88, 133, -1, 41, 103, -3, -1, 118, 146, -1, 25, 145, -7, -3, + -1, 72, 132, -1, 87, 117, -3, -1, 56, 131, -1, 102, 40, -17, -7, + -3, -1, 130, 24, -1, 71, 116, -5, -1, 129, -1, 8, 128, -1, 86, + 101, -7, -5, -1, 23, -1, 7, 112, 115, -3, -1, 55, 39, 114, -15, + -7, -3, -1, 70, 100, -1, 85, 113, -3, -1, 54, 99, -1, 69, 84, + -7, -3, -1, 38, 98, -1, 22, 97, -5, -3, -1, 6, 96, 53, -1, + 83, 68, -51, -37, -23, -15, -9, -3, -1, 37, 82, -1, 21, -1, 5, + 80, -1, 81, -1, 52, 67, -3, -1, 36, 66, -1, 51, 20, -9, -5, + -1, 65, -1, 4, 64, -1, 35, 50, -1, 19, 49, -7, -5, -3, -1, + 3, 48, 34, 18, -1, 33, -1, 2, 32, -3, -1, 17, 1, -1, 16, + 0 +}; + +static short tab_c0[] = +{ + -29, -21, -13, -7, -3, -1, 11, 15, -1, 13, 14, -3, -1, 7, 5, + 9, -3, -1, 6, 3, -1, 10, 12, -3, -1, 2, 1, -1, 4, 8, + 0 +}; + +static short tab_c1[] = +{ + -15, -7, -3, -1, 15, 14, -1, 13, 12, -3, -1, 11, 10, -1, 9, + 8, -7, -3, -1, 7, 6, -1, 5, 4, -3, -1, 3, 2, -1, 1, + 0 +}; + + + +static struct newhuff ht[] = +{ + { /* 0 */ 0 , tab0 } , + { /* 2 */ 0 , tab1 } , + { /* 3 */ 0 , tab2 } , + { /* 3 */ 0 , tab3 } , + { /* 0 */ 0 , tab0 } , + { /* 4 */ 0 , tab5 } , + { /* 4 */ 0 , tab6 } , + { /* 6 */ 0 , tab7 } , + { /* 6 */ 0 , tab8 } , + { /* 6 */ 0 , tab9 } , + { /* 8 */ 0 , tab10 } , + { /* 8 */ 0 , tab11 } , + { /* 8 */ 0 , tab12 } , + { /* 16 */ 0 , tab13 } , + { /* 0 */ 0 , tab0 } , + { /* 16 */ 0 , tab15 } , + + { /* 16 */ 1 , tab16 } , + { /* 16 */ 2 , tab16 } , + { /* 16 */ 3 , tab16 } , + { /* 16 */ 4 , tab16 } , + { /* 16 */ 6 , tab16 } , + { /* 16 */ 8 , tab16 } , + { /* 16 */ 10, tab16 } , + { /* 16 */ 13, tab16 } , + { /* 16 */ 4 , tab24 } , + { /* 16 */ 5 , tab24 } , + { /* 16 */ 6 , tab24 } , + { /* 16 */ 7 , tab24 } , + { /* 16 */ 8 , tab24 } , + { /* 16 */ 9 , tab24 } , + { /* 16 */ 11, tab24 } , + { /* 16 */ 13, tab24 } +}; + +static struct newhuff htc[] = +{ + { /* 1 , 1 , */ 0 , tab_c0 } , + { /* 1 , 1 , */ 0 , tab_c1 } +}; + + Added: freeswitch/trunk/src/mod/formats/mod_shout/interface.c ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/interface.c Mon Mar 12 22:02:28 2007 @@ -0,0 +1,321 @@ + +#include <stdlib.h> +#include <stdio.h> + +#include "mpg123.h" +#include "mpglib.h" + + +void InitMP3Constants(void) +{ + init_layer3_const(); + make_decode_tables_const(); + +} + + +BOOL InitMP3(struct mpstr *mp, long outscale) +{ + /* quiet 4096 med 8192 */ + + memset(mp,0,sizeof(struct mpstr)); + + mp->framesize = 0; + mp->fsizeold = -1; + mp->bsize = 0; + mp->head = mp->tail = NULL; + mp->fr.single = 3; /* force mono */ + mp->bsnum = 0; + mp->synth_bo = 1; + mp->outsamplerate = 8000; + + make_decode_tables_scale(mp, outscale); + + init_layer3_sample_limits(mp, SBLIMIT); + + return !0; +} + +void ExitMP3(struct mpstr *mp) +{ + struct buf *b,*bn; + + b = mp->tail; + while(b) { + free(b->pnt); + bn = b->next; + free(b); + b = bn; + } +} + +static struct buf *addbuf(struct mpstr *mp,char *buf,int size) +{ + struct buf *nbuf; + + nbuf = malloc( sizeof(struct buf) ); + if(!nbuf) { + //printf("Out of memory!\n"); + return NULL; + } + nbuf->pnt = malloc(size); + if(!nbuf->pnt) { + free(nbuf); + return NULL; + } + nbuf->size = size; + memcpy(nbuf->pnt,buf,size); + nbuf->next = NULL; + nbuf->prev = mp->head; + nbuf->pos = 0; + + if(!mp->tail) { + mp->tail = nbuf; + } + else { + mp->head->next = nbuf; + } + + mp->head = nbuf; + mp->bsize += size; + + return nbuf; +} + +static void remove_buf(struct mpstr *mp) +{ + struct buf *buf = mp->tail; + + mp->tail = buf->next; + if(mp->tail) + mp->tail->prev = NULL; + else { + mp->tail = mp->head = NULL; + } + + free(buf->pnt); + free(buf); + +} + +static int read_buf_byte(int *error, struct mpstr *mp) +{ + unsigned int b;int pos; + + pos = mp->tail->pos; + while(pos >= mp->tail->size) { + remove_buf(mp); + pos = mp->tail->pos; + if(!mp->tail) { + /* We may pick up this error a few times*/ + /* But things have gone pear shaped */ + //printf("Fatal Buffer error!\n"); + *error = 1; + return (0); + } + } + + b = mp->tail->pnt[pos]; + mp->bsize--; + mp->tail->pos++; + + + return b; +} + +static int read_head(struct mpstr *mp) +{ + unsigned long head; + int error=0; + + + head = read_buf_byte(&error, mp); + head <<= 8; + head |= read_buf_byte(&error, mp); + head <<= 8; + head |= read_buf_byte(&error, mp); + head <<= 8; + head |= read_buf_byte(&error, mp); + + mp->header = head; + + if(error){ + return (1); + }else + return (0); + +} + +static int head_check(unsigned long head) +{ + if( (head & 0xffe00000) != 0xffe00000) + return FALSE; + if(!((head>>17)&3)) + return FALSE; + if( ((head>>12)&0xf) == 0xf || ((head>>12)&0xf) == 0) + return FALSE; + if( ((head>>10)&0x3) == 0x3 ) + return FALSE; + if ((head & 0xffff0000) == 0xfffe0000) + return FALSE; + + return TRUE; +} + +static int head_shift(struct mpstr *mp) +{ + unsigned long head; + int error = 0; + + head = mp->header; + + head <<= 8; + head |= read_buf_byte(&error, mp); + + mp->header = head; + + if (error){ + return (1); + }else + return (0); + +} + + +int decodeMP3(struct mpstr *mp,char *in,int isize,char *out, + int osize,int *done) +{ + int len; + long n,m; + int down_sample_sblimit; + + if(osize < 4608) { + //printf("To less out space\n"); + return MP3_ERR; + } + + if(in) { + if(addbuf(mp,in,isize) == NULL) { + return MP3_ERR; + } + } + + /* First decode header */ + if(mp->framesize == 0) { + if(mp->bsize < 4) { + return MP3_NEED_MORE; + } + if (read_head(mp)) + return MP3_ERR; + + if(!head_check(mp->header) ) { + int i; + + //printf("Junk at the beginning of frame %08lx\n",mp->header); + + /* step in byte steps through next 64K */ + for(i=0;i<65536;i++) { + if(!mp->bsize) + return MP3_NEED_MORE; + + if(head_shift(mp)) + return MP3_ERR; + + if(head_check(mp->header)) + break; + } + if(i == 65536) { + //printf("Giving up searching valid MPEG header\n"); + return MP3_ERR; + } + } + + decode_header(&mp->fr,mp->header); + mp->framesize = mp->fr.framesize; + + if (!mp->initmp3){ + mp->initmp3 = 1; + + n = freqs[mp->fr.sampling_frequency]; + if (mp->outsamplerate) { + m = mp->outsamplerate; + } + else { + m =n; + } + + if (synth_ntom_set_step(n,m)) + return MP3_ERR; + + + if(n>m) { + down_sample_sblimit = SBLIMIT * m; + down_sample_sblimit /= n; + } + else { + down_sample_sblimit = SBLIMIT; + } + + init_layer3_sample_limits(mp, down_sample_sblimit); + + } + } + + + if(mp->fr.framesize > mp->bsize) + return MP3_NEED_MORE; + + (mp->worksample).wordpointer = mp->bsspace[mp->bsnum] + 512; + mp->bsnum = (mp->bsnum + 1) & 0x1; + (mp->worksample).bitindex = 0; + + len = 0; + while(len < mp->framesize) { + int nlen; + int blen = mp->tail->size - mp->tail->pos; + if( (mp->framesize - len) <= blen) { + nlen = mp->framesize-len; + } + else { + nlen = blen; + } + memcpy((mp->worksample).wordpointer+len,mp->tail->pnt+mp->tail->pos,nlen); + len += nlen; + mp->tail->pos += nlen; + mp->bsize -= nlen; + if(mp->tail->pos == mp->tail->size) { + remove_buf(mp); + } + } + + *done = 0; + if(mp->fr.error_protection) + getbits(mp, 16); + + if (do_layer3(mp,(unsigned char *) out,done)) + return MP3_ERR; + + mp->fsizeold = mp->framesize; + mp->framesize = 0; + + return MP3_OK; +} + +int set_pointer(struct mpstr *mp, long backstep) +{ + unsigned char *bsbufold; + if(mp->fsizeold < 0 && backstep > 0) { + //printf("Can't step back %ld!\n",backstep); + return MP3_ERR; + } + bsbufold = mp->bsspace[mp->bsnum] + 512; + (mp->worksample).wordpointer -= backstep; + if (backstep) + memcpy((mp->worksample).wordpointer,bsbufold+mp->fsizeold-backstep,backstep); + (mp->worksample).bitindex = 0; + return MP3_OK; +} + + + + Added: freeswitch/trunk/src/mod/formats/mod_shout/layer3.c ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/layer3.c Mon Mar 12 22:02:28 2007 @@ -0,0 +1,2028 @@ +/* + * Mpeg Layer-3 audio decoder + * -------------------------- + * copyright (c) 1995,1996,1997 by Michael Hipp. + * All rights reserved. See also 'README' + */ + + +#include <stdlib.h> +#include "mpg123.h" +#include "mpglib.h" +#include "huffman.h" + +#define MPEG1 + +/* These should all be constants setup once using init_layer3_const */ +static real ispow[8207]; +static real aa_ca[8],aa_cs[8]; +static real COS1[12][6]; +static real win[4][36]; +static real win1[4][36]; +static real gainpow2[256+118+4]; +static real COS9[9]; +static real COS6_1,COS6_2; +static real tfcos36[9]; +static real tfcos12[3]; + +struct bandInfoStruct { + short longIdx[23]; + short longDiff[22]; + short shortIdx[14]; + short shortDiff[13]; +}; + + +struct bandInfoStruct bandInfo[9] = { + +/* MPEG 1.0 */ + { {0,4,8,12,16,20,24,30,36,44,52,62,74, 90,110,134,162,196,238,288,342,418,576}, + {4,4,4,4,4,4,6,6,8, 8,10,12,16,20,24,28,34,42,50,54, 76,158}, + {0,4*3,8*3,12*3,16*3,22*3,30*3,40*3,52*3,66*3, 84*3,106*3,136*3,192*3}, + {4,4,4,4,6,8,10,12,14,18,22,30,56} } , + + { {0,4,8,12,16,20,24,30,36,42,50,60,72, 88,106,128,156,190,230,276,330,384,576}, + {4,4,4,4,4,4,6,6,6, 8,10,12,16,18,22,28,34,40,46,54, 54,192}, + {0,4*3,8*3,12*3,16*3,22*3,28*3,38*3,50*3,64*3, 80*3,100*3,126*3,192*3}, + {4,4,4,4,6,6,10,12,14,16,20,26,66} } , + + { {0,4,8,12,16,20,24,30,36,44,54,66,82,102,126,156,194,240,296,364,448,550,576} , + {4,4,4,4,4,4,6,6,8,10,12,16,20,24,30,38,46,56,68,84,102, 26} , + {0,4*3,8*3,12*3,16*3,22*3,30*3,42*3,58*3,78*3,104*3,138*3,180*3,192*3} , + {4,4,4,4,6,8,12,16,20,26,34,42,12} } , + +/* MPEG 2.0 */ + { {0,6,12,18,24,30,36,44,54,66,80,96,116,140,168,200,238,284,336,396,464,522,576}, + {6,6,6,6,6,6,8,10,12,14,16,20,24,28,32,38,46,52,60,68,58,54 } , + {0,4*3,8*3,12*3,18*3,24*3,32*3,42*3,56*3,74*3,100*3,132*3,174*3,192*3} , + {4,4,4,6,6,8,10,14,18,26,32,42,18 } } , + + { {0,6,12,18,24,30,36,44,54,66,80,96,114,136,162,194,232,278,330,394,464,540,576}, + {6,6,6,6,6,6,8,10,12,14,16,18,22,26,32,38,46,52,64,70,76,36 } , + {0,4*3,8*3,12*3,18*3,26*3,36*3,48*3,62*3,80*3,104*3,136*3,180*3,192*3} , + {4,4,4,6,8,10,12,14,18,24,32,44,12 } } , + + { {0,6,12,18,24,30,36,44,54,66,80,96,116,140,168,200,238,284,336,396,464,522,576}, + {6,6,6,6,6,6,8,10,12,14,16,20,24,28,32,38,46,52,60,68,58,54 }, + {0,4*3,8*3,12*3,18*3,26*3,36*3,48*3,62*3,80*3,104*3,134*3,174*3,192*3}, + {4,4,4,6,8,10,12,14,18,24,30,40,18 } } , +/* MPEG 2.5 */ + { {0,6,12,18,24,30,36,44,54,66,80,96,116,140,168,200,238,284,336,396,464,522,576} , + {6,6,6,6,6,6,8,10,12,14,16,20,24,28,32,38,46,52,60,68,58,54}, + {0,12,24,36,54,78,108,144,186,240,312,402,522,576}, + {4,4,4,6,8,10,12,14,18,24,30,40,18} }, + { {0,6,12,18,24,30,36,44,54,66,80,96,116,140,168,200,238,284,336,396,464,522,576} , + {6,6,6,6,6,6,8,10,12,14,16,20,24,28,32,38,46,52,60,68,58,54}, + {0,12,24,36,54,78,108,144,186,240,312,402,522,576}, + {4,4,4,6,8,10,12,14,18,24,30,40,18} }, + { {0,12,24,36,48,60,72,88,108,132,160,192,232,280,336,400,476,566,568,570,572,574,576}, + {12,12,12,12,12,12,16,20,24,28,32,40,48,56,64,76,90,2,2,2,2,2}, + {0, 24, 48, 72,108,156,216,288,372,480,486,492,498,576}, + {8,8,8,12,16,20,24,28,36,2,2,2,26} } , +}; + +static int mapbuf0[9][152]; +static int mapbuf1[9][156]; +static int mapbuf2[9][44]; +static int *map[9][3]; +static int *mapend[9][3]; + +static unsigned int n_slen2[512]; /* MPEG 2.0 slen for 'normal' mode */ +static unsigned int i_slen2[256]; /* MPEG 2.0 slen for intensity stereo */ + +static real tan1_1[16],tan2_1[16],tan1_2[16],tan2_2[16]; +static real pow1_1[2][16],pow2_1[2][16],pow1_2[2][16],pow2_2[2][16]; + +/* + * init constant tables for layer-3 + */ +void init_layer3_const(void) +{ + int i,j,k,l; + + for(i=-256;i<118+4;i++) + gainpow2[i+256] = pow((double)2.0,-0.25 * (double) (i+210) ); + + for(i=0;i<8207;i++) + ispow[i] = pow((double)i,(double)4.0/3.0); + + for (i=0;i<8;i++) + { + static double Ci[8]={-0.6,-0.535,-0.33,-0.185,-0.095,-0.041,-0.0142,-0.0037}; + double sq=sqrt(1.0+Ci[i]*Ci[i]); + aa_cs[i] = 1.0/sq; + aa_ca[i] = Ci[i]/sq; + } + + for(i=0;i<18;i++) + { + win[0][i] = win[1][i] = 0.5 * sin( M_PI / 72.0 * (double) (2*(i+0) +1) ) / cos ( M_PI * (double) (2*(i+0) +19) / 72.0 ); + win[0][i+18] = win[3][i+18] = 0.5 * sin( M_PI / 72.0 * (double) (2*(i+18)+1) ) / cos ( M_PI * (double) (2*(i+18)+19) / 72.0 ); + } + for(i=0;i<6;i++) + { + win[1][i+18] = 0.5 / cos ( M_PI * (double) (2*(i+18)+19) / 72.0 ); + win[3][i+12] = 0.5 / cos ( M_PI * (double) (2*(i+12)+19) / 72.0 ); + win[1][i+24] = 0.5 * sin( M_PI / 24.0 * (double) (2*i+13) ) / cos ( M_PI * (double) (2*(i+24)+19) / 72.0 ); + win[1][i+30] = win[3][i] = 0.0; + win[3][i+6 ] = 0.5 * sin( M_PI / 24.0 * (double) (2*i+1) ) / cos ( M_PI * (double) (2*(i+6 )+19) / 72.0 ); + } + + for(i=0;i<9;i++) + COS9[i] = cos( M_PI / 18.0 * (double) i); + + for(i=0;i<9;i++) + tfcos36[i] = 0.5 / cos ( M_PI * (double) (i*2+1) / 36.0 ); + for(i=0;i<3;i++) + tfcos12[i] = 0.5 / cos ( M_PI * (double) (i*2+1) / 12.0 ); + + COS6_1 = cos( M_PI / 6.0 * (double) 1); + COS6_2 = cos( M_PI / 6.0 * (double) 2); + + for(i=0;i<12;i++) + { + win[2][i] = 0.5 * sin( M_PI / 24.0 * (double) (2*i+1) ) / cos ( M_PI * (double) (2*i+7) / 24.0 ); + for(j=0;j<6;j++) + COS1[i][j] = cos( M_PI / 24.0 * (double) ((2*i+7)*(2*j+1)) ); + } + + for(j=0;j<4;j++) { + static int len[4] = { 36,36,12,36 }; + for(i=0;i<len[j];i+=2) + win1[j][i] = + win[j][i]; + for(i=1;i<len[j];i+=2) + win1[j][i] = - win[j][i]; + } + + for(i=0;i<16;i++) + { + double t = tan( (double) i * M_PI / 12.0 ); + tan1_1[i] = t / (1.0+t); + tan2_1[i] = 1.0 / (1.0 + t); + tan1_2[i] = M_SQRT2 * t / (1.0+t); + tan2_2[i] = M_SQRT2 / (1.0 + t); + + for(j=0;j<2;j++) { + double base = pow(2.0,-0.25*(j+1.0)); + double p1=1.0,p2=1.0; + if(i > 0) { + if( i & 1 ) + p1 = pow(base,(i+1.0)*0.5); + else + p2 = pow(base,i*0.5); + } + pow1_1[j][i] = p1; + pow2_1[j][i] = p2; + pow1_2[j][i] = M_SQRT2 * p1; + pow2_2[j][i] = M_SQRT2 * p2; + } + } + + for(j=0;j<9;j++) + { + struct bandInfoStruct *bi = &bandInfo[j]; + int *mp; + int cb,lwin; + short *bdf; + + mp = map[j][0] = mapbuf0[j]; + bdf = bi->longDiff; + for(i=0,cb = 0; cb < 8 ; cb++,i+=*bdf++) { + *mp++ = (*bdf) >> 1; + *mp++ = i; + *mp++ = 3; + *mp++ = cb; + } + bdf = bi->shortDiff+3; + for(cb=3;cb<13;cb++) { + int l = (*bdf++) >> 1; + for(lwin=0;lwin<3;lwin++) { + *mp++ = l; + *mp++ = i + lwin; + *mp++ = lwin; + *mp++ = cb; + } + i += 6*l; + } + mapend[j][0] = mp; + + mp = map[j][1] = mapbuf1[j]; + bdf = bi->shortDiff+0; + for(i=0,cb=0;cb<13;cb++) { + int l = (*bdf++) >> 1; + for(lwin=0;lwin<3;lwin++) { + *mp++ = l; + *mp++ = i + lwin; + *mp++ = lwin; + *mp++ = cb; + } + i += 6*l; + } + mapend[j][1] = mp; + + mp = map[j][2] = mapbuf2[j]; + bdf = bi->longDiff; + for(cb = 0; cb < 22 ; cb++) { + *mp++ = (*bdf++) >> 1; + *mp++ = cb; + } + mapend[j][2] = mp; + + } + + for(i=0;i<5;i++) { + for(j=0;j<6;j++) { + for(k=0;k<6;k++) { + int n = k + j * 6 + i * 36; + i_slen2[n] = i|(j<<3)|(k<<6)|(3<<12); + } + } + } + for(i=0;i<4;i++) { + for(j=0;j<4;j++) { + for(k=0;k<4;k++) { + int n = k + j * 4 + i * 16; + i_slen2[n+180] = i|(j<<3)|(k<<6)|(4<<12); + } + } + } + for(i=0;i<4;i++) { + for(j=0;j<3;j++) { + int n = j + i * 3; + i_slen2[n+244] = i|(j<<3) | (5<<12); + n_slen2[n+500] = i|(j<<3) | (2<<12) | (1<<15); + } + } + + for(i=0;i<5;i++) { + for(j=0;j<5;j++) { + for(k=0;k<4;k++) { + for(l=0;l<4;l++) { + int n = l + k * 4 + j * 16 + i * 80; + n_slen2[n] = i|(j<<3)|(k<<6)|(l<<9)|(0<<12); + } + } + } + } + for(i=0;i<5;i++) { + for(j=0;j<5;j++) { + for(k=0;k<4;k++) { + int n = k + j * 4 + i * 20; + n_slen2[n+400] = i|(j<<3)|(k<<6)|(1<<12); + } + } + } +} + +/* MP3 file specific rates */ +void init_layer3_sample_limits(struct mpstr *mp, int down_sample_sblimit) +{ + int i,j; + for(j=0;j<9;j++) { + for(i=0;i<23;i++) { + (mp->longLimit)[j][i] = (bandInfo[j].longIdx[i] - 1 + 8) / 18 + 1; + if((mp->longLimit)[j][i] > (down_sample_sblimit) ) + (mp->longLimit)[j][i] = down_sample_sblimit; + } + for(i=0;i<14;i++) { + (mp->shortLimit)[j][i] = (bandInfo[j].shortIdx[i] - 1) / 18 + 1; + if((mp->shortLimit)[j][i] > (down_sample_sblimit) ) + (mp->shortLimit)[j][i] = down_sample_sblimit; + } + } +} + + + +/* + * read additional side information + */ +#ifdef MPEG1 +static int III_get_side_info_1(struct mpstr *mp, struct III_sideinfo *si,int stereo, + int ms_stereo,long sfreq,int single) +{ + int ch, gr; + int powdiff = (single == 3) ? 4 : 0; + + si->main_data_begin = getbits(mp, 9); + if (stereo == 1) + si->private_bits = getbits_fast(mp, 5); + else + si->private_bits = getbits_fast(mp, 3); + + for (ch=0; ch<stereo; ch++) { + si->ch[ch].gr[0].scfsi = -1; + si->ch[ch].gr[1].scfsi = getbits_fast(mp, 4); + } + + for (gr=0; gr<2; gr++) + { + for (ch=0; ch<stereo; ch++) + { + register struct gr_info_s *gr_info = &(si->ch[ch].gr[gr]); + + gr_info->part2_3_length = getbits(mp, 12); + gr_info->big_values = getbits_fast(mp, 9); + if(gr_info->big_values > 288) { + //printf("big_values too large!\n"); + gr_info->big_values = 288; + } + gr_info->pow2gain = gainpow2+256 - getbits_fast(mp, 8) + powdiff; + if(ms_stereo) + gr_info->pow2gain += 2; + gr_info->scalefac_compress = getbits_fast(mp, 4); +/* window-switching flag == 1 for block_Type != 0 .. and block-type == 0 -> win-sw-flag = 0 */ + if(get1bit(mp)) + { + int i; + gr_info->block_type = getbits_fast(mp, 2); + gr_info->mixed_block_flag = get1bit(mp); + gr_info->table_select[0] = getbits_fast(mp, 5); + gr_info->table_select[1] = getbits_fast(mp, 5); + /* + * table_select[2] not needed, because there is no region2, + * but to satisfy some verifications tools we set it either. + */ + gr_info->table_select[2] = 0; + for(i=0;i<3;i++) + gr_info->full_gain[i] = gr_info->pow2gain + (getbits_fast(mp, 3)<<3); + + if(gr_info->block_type == 0) { + //printf("Blocktype == 0 and window-switching == 1 not allowed.\n"); + return (1); + } + /* region_count/start parameters are implicit in this case. */ + gr_info->region1start = 36>>1; + gr_info->region2start = 576>>1; + } + else + { + int i,r0c,r1c; + for (i=0; i<3; i++) + gr_info->table_select[i] = getbits_fast(mp, 5); + r0c = getbits_fast(mp, 4); + r1c = getbits_fast(mp, 3); + gr_info->region1start = bandInfo[sfreq].longIdx[r0c+1] >> 1 ; + gr_info->region2start = bandInfo[sfreq].longIdx[r0c+1+r1c+1] >> 1; + gr_info->block_type = 0; + gr_info->mixed_block_flag = 0; + } + gr_info->preflag = get1bit(mp); + gr_info->scalefac_scale = get1bit(mp); + gr_info->count1table_select = get1bit(mp); + } + } + return (0); + +} +#endif + +/* + * Side Info for MPEG 2.0 / LSF + */ +static int III_get_side_info_2(struct mpstr *mp, struct III_sideinfo *si,int stereo, + int ms_stereo,long sfreq,int single) +{ + int ch; + int powdiff = (single == 3) ? 4 : 0; + + si->main_data_begin = getbits(mp, 8); + if (stereo == 1) + si->private_bits = get1bit(mp); + else + si->private_bits = getbits_fast(mp, 2); + + for (ch=0; ch<stereo; ch++) + { + register struct gr_info_s *gr_info = &(si->ch[ch].gr[0]); + + gr_info->part2_3_length = getbits(mp, 12); + gr_info->big_values = getbits_fast(mp, 9); + if(gr_info->big_values > 288) { + //printf("big_values too large!\n"); + gr_info->big_values = 288; + } + gr_info->pow2gain = gainpow2+256 - getbits_fast(mp, 8) + powdiff; + if(ms_stereo) + gr_info->pow2gain += 2; + gr_info->scalefac_compress = getbits(mp, 9); +/* window-switching flag == 1 for block_Type != 0 .. and block-type == 0 -> win-sw-flag = 0 */ + if(get1bit(mp)) + { + int i; + gr_info->block_type = getbits_fast(mp, 2); + gr_info->mixed_block_flag = get1bit(mp); + gr_info->table_select[0] = getbits_fast(mp, 5); + gr_info->table_select[1] = getbits_fast(mp, 5); + /* + * table_select[2] not needed, because there is no region2, + * but to satisfy some verifications tools we set it either. + */ + gr_info->table_select[2] = 0; + for(i=0;i<3;i++) + gr_info->full_gain[i] = gr_info->pow2gain + (getbits_fast(mp, 3)<<3); + + if(gr_info->block_type == 0) { + //printf("Blocktype == 0 and window-switching == 1 not allowed.\n"); + return (1); + } + /* region_count/start parameters are implicit in this case. */ +/* check this again! */ + if(gr_info->block_type == 2) + gr_info->region1start = 36>>1; + else if(sfreq == 8) +/* check this for 2.5 and sfreq=8 */ + gr_info->region1start = 108>>1; + else + gr_info->region1start = 54>>1; + gr_info->region2start = 576>>1; + } + else + { + int i,r0c,r1c; + for (i=0; i<3; i++) + gr_info->table_select[i] = getbits_fast(mp, 5); + r0c = getbits_fast(mp, 4); + r1c = getbits_fast(mp, 3); + gr_info->region1start = bandInfo[sfreq].longIdx[r0c+1] >> 1 ; + gr_info->region2start = bandInfo[sfreq].longIdx[r0c+1+r1c+1] >> 1; + gr_info->block_type = 0; + gr_info->mixed_block_flag = 0; + } + gr_info->scalefac_scale = get1bit(mp); + gr_info->count1table_select = get1bit(mp); + } + return (0); +} + +/* + * read scalefactors + */ +#ifdef MPEG1 +static int III_get_scale_factors_1(struct mpstr *mp, int *scf,struct gr_info_s *gr_info) +{ + static unsigned char slen[2][16] = { + {0, 0, 0, 0, 3, 1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4}, + {0, 1, 2, 3, 0, 1, 2, 3, 1, 2, 3, 1, 2, 3, 2, 3} + }; + int numbits; + int num0 = slen[0][gr_info->scalefac_compress]; + int num1 = slen[1][gr_info->scalefac_compress]; + + if (gr_info->block_type == 2) + { + int i=18; + numbits = (num0 + num1) * 18; + + if (gr_info->mixed_block_flag) { + for (i=8;i;i--) + *scf++ = getbits_fast(mp, num0); + i = 9; + numbits -= num0; /* num0 * 17 + num1 * 18 */ + } + + for (;i;i--) + *scf++ = getbits_fast(mp, num0); + for (i = 18; i; i--) + *scf++ = getbits_fast(mp, num1); + *scf++ = 0; *scf++ = 0; *scf++ = 0; /* short[13][0..2] = 0 */ + } + else + { + int i; + int scfsi = gr_info->scfsi; + + if(scfsi < 0) { /* scfsi < 0 => granule == 0 */ + for(i=11;i;i--) + *scf++ = getbits_fast(mp, num0); + for(i=10;i;i--) + *scf++ = getbits_fast(mp, num1); + numbits = (num0 + num1) * 10 + num0; + } + else { + numbits = 0; + if(!(scfsi & 0x8)) { + for (i=6;i;i--) + *scf++ = getbits_fast(mp, num0); + numbits += num0 * 6; + } + else { + *scf++ = 0; *scf++ = 0; *scf++ = 0; /* set to ZERO necessary? */ + *scf++ = 0; *scf++ = 0; *scf++ = 0; + } + + if(!(scfsi & 0x4)) { + for (i=5;i;i--) + *scf++ = getbits_fast(mp, num0); + numbits += num0 * 5; + } + else { + *scf++ = 0; *scf++ = 0; *scf++ = 0; /* set to ZERO necessary? */ + *scf++ = 0; *scf++ = 0; + } + + if(!(scfsi & 0x2)) { + for(i=5;i;i--) + *scf++ = getbits_fast(mp, num1); + numbits += num1 * 5; + } + else { + *scf++ = 0; *scf++ = 0; *scf++ = 0; /* set to ZERO necessary? */ + *scf++ = 0; *scf++ = 0; + } + + if(!(scfsi & 0x1)) { + for (i=5;i;i--) + *scf++ = getbits_fast(mp, num1); + numbits += num1 * 5; + } + else { + *scf++ = 0; *scf++ = 0; *scf++ = 0; /* set to ZERO necessary? */ + *scf++ = 0; *scf++ = 0; + } + } + + *scf++ = 0; /* no l[21] in original sources */ + } + return numbits; +} +#endif + +static int III_get_scale_factors_2(struct mpstr *mp, int *scf,struct gr_info_s *gr_info,int i_stereo) +{ + unsigned char *pnt; + int i,j; + unsigned int slen; + int n = 0; + int numbits = 0; + + static unsigned char stab[3][6][4] = { + { { 6, 5, 5,5 } , { 6, 5, 7,3 } , { 11,10,0,0} , + { 7, 7, 7,0 } , { 6, 6, 6,3 } , { 8, 8,5,0} } , + { { 9, 9, 9,9 } , { 9, 9,12,6 } , { 18,18,0,0} , + {12,12,12,0 } , {12, 9, 9,6 } , { 15,12,9,0} } , + { { 6, 9, 9,9 } , { 6, 9,12,6 } , { 15,18,0,0} , + { 6,15,12,0 } , { 6,12, 9,6 } , { 6,18,9,0} } }; + + if(i_stereo) /* i_stereo AND second channel -> do_layer3() checks this */ + slen = i_slen2[gr_info->scalefac_compress>>1]; + else + slen = n_slen2[gr_info->scalefac_compress]; + + gr_info->preflag = (slen>>15) & 0x1; + + n = 0; + if( gr_info->block_type == 2 ) { + n++; + if(gr_info->mixed_block_flag) + n++; + } + + pnt = stab[n][(slen>>12)&0x7]; + + for(i=0;i<4;i++) { + int num = slen & 0x7; + slen >>= 3; + if(num) { + for(j=0;j<(int)(pnt[i]);j++) + *scf++ = getbits_fast(mp, num); + numbits += pnt[i] * num; + } + else { + for(j=0;j<(int)(pnt[i]);j++) + *scf++ = 0; + } + } + + n = (n << 1) + 1; + for(i=0;i<n;i++) + *scf++ = 0; + + return numbits; +} + +static int pretab1[22] = {0,0,0,0,0,0,0,0,0,0,0,1,1,1,1,2,2,3,3,3,2,0}; +static int pretab2[22] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0}; + +/* + * don't forget to apply the same changes to III_dequantize_sample_ms() !!! + */ +static int III_dequantize_sample(struct mpstr *mp, real xr[SBLIMIT][SSLIMIT],int *scf, + struct gr_info_s *gr_info,int sfreq,int part2bits) +{ + int shift = 1 + gr_info->scalefac_scale; + real *xrpnt = (real *) xr; + int l[3],l3; + int part2remain = gr_info->part2_3_length - part2bits; + int *me; + + { + int bv = gr_info->big_values; + int region1 = gr_info->region1start; + int region2 = gr_info->region2start; + + l3 = ((576>>1)-bv)>>1; +/* + * we may lose the 'odd' bit here !! + * check this later again + */ + if(bv <= region1) { + l[0] = bv; l[1] = 0; l[2] = 0; + } + else { + l[0] = region1; + if(bv <= region2) { + l[1] = bv - l[0]; l[2] = 0; + } + else { + l[1] = region2 - l[0]; l[2] = bv - region2; + } + } + } + + if(gr_info->block_type == 2) { + /* + * decoding with short or mixed mode BandIndex table + */ + int i,max[4]; + int step=0,lwin=0,cb=0; + register real v = 0.0; + register int *m,mc; + + if(gr_info->mixed_block_flag) { + max[3] = -1; + max[0] = max[1] = max[2] = 2; + m = map[sfreq][0]; + me = mapend[sfreq][0]; + } + else { + max[0] = max[1] = max[2] = max[3] = -1; + /* max[3] not really needed in this case */ + m = map[sfreq][1]; + me = mapend[sfreq][1]; + } + + mc = 0; + for(i=0;i<2;i++) { + int lp = l[i]; + struct newhuff *h = ht+gr_info->table_select[i]; + for(;lp;lp--,mc--) { + register int x,y; + if( (!mc) ) { + mc = *m++; + xrpnt = ((real *) xr) + (*m++); + lwin = *m++; + cb = *m++; + if(lwin == 3) { + v = gr_info->pow2gain[(*scf++) << shift]; + step = 1; + } + else { + v = gr_info->full_gain[lwin][(*scf++) << shift]; + step = 3; + } + } + { + register short *val = h->table; + while((y=*val++)<0) { + if (get1bit(mp)) + val -= y; + part2remain--; + } + x = y >> 4; + y &= 0xf; + } + if(x == 15) { + max[lwin] = cb; + part2remain -= h->linbits+1; + x += getbits(mp, h->linbits); + if(get1bit(mp)) + *xrpnt = -ispow[x] * v; + else + *xrpnt = ispow[x] * v; + } + else if(x) { + max[lwin] = cb; + if(get1bit(mp)) + *xrpnt = -ispow[x] * v; + else + *xrpnt = ispow[x] * v; + part2remain--; + } + else + *xrpnt = 0.0; + xrpnt += step; + if(y == 15) { + max[lwin] = cb; + part2remain -= h->linbits+1; + y += getbits(mp, h->linbits); + if(get1bit(mp)) + *xrpnt = -ispow[y] * v; + else + *xrpnt = ispow[y] * v; + } + else if(y) { + max[lwin] = cb; + if(get1bit(mp)) + *xrpnt = -ispow[y] * v; + else + *xrpnt = ispow[y] * v; + part2remain--; + } + else + *xrpnt = 0.0; + xrpnt += step; + } + } + for(;l3 && (part2remain > 0);l3--) { + struct newhuff *h = htc+gr_info->count1table_select; + register short *val = h->table,a; + + while((a=*val++)<0) { + part2remain--; + if(part2remain < 0) { + part2remain++; + a = 0; + break; + } + if (get1bit(mp)) + val -= a; + } + + for(i=0;i<4;i++) { + if(!(i & 1)) { + if(!mc) { + mc = *m++; + xrpnt = ((real *) xr) + (*m++); + lwin = *m++; + cb = *m++; + if(lwin == 3) { + v = gr_info->pow2gain[(*scf++) << shift]; + step = 1; + } + else { + v = gr_info->full_gain[lwin][(*scf++) << shift]; + step = 3; + } + } + mc--; + } + if( (a & (0x8>>i)) ) { + max[lwin] = cb; + part2remain--; + if(part2remain < 0) { + part2remain++; + break; + } + if(get1bit(mp)) + *xrpnt = -v; + else + *xrpnt = v; + } + else + *xrpnt = 0.0; + xrpnt += step; + } + } + + while( m < me ) { + if(!mc) { + mc = *m++; + xrpnt = ((real *) xr) + *m++; + if( (*m++) == 3) + step = 1; + else + step = 3; + m++; /* cb */ + } + mc--; + *xrpnt = 0.0; + xrpnt += step; + *xrpnt = 0.0; + xrpnt += step; +/* we could add a little opt. here: + * if we finished a band for window 3 or a long band + * further bands could copied in a simple loop without a + * special 'map' decoding + */ + } + + gr_info->maxband[0] = max[0]+1; + gr_info->maxband[1] = max[1]+1; + gr_info->maxband[2] = max[2]+1; + gr_info->maxbandl = max[3]+1; + + { + int rmax = max[0] > max[1] ? max[0] : max[1]; + rmax = (rmax > max[2] ? rmax : max[2]) + 1; + gr_info->maxb = rmax ? (mp->shortLimit)[sfreq][rmax] : (mp->longLimit)[sfreq][max[3]+1]; + } + + } + else { + /* + * decoding with 'long' BandIndex table (block_type != 2) + */ + int *pretab = gr_info->preflag ? pretab1 : pretab2; + int i,max = -1; + int cb = 0; + register int *m = map[sfreq][2]; + register real v = 0.0; + register int mc = 0; +#if 0 + me = mapend[sfreq][2]; +#endif + + /* + * long hash table values + */ + for(i=0;i<3;i++) { + int lp = l[i]; + struct newhuff *h = ht+gr_info->table_select[i]; + + for(;lp;lp--,mc--) { + int x,y; + + if(!mc) { + mc = *m++; + v = gr_info->pow2gain[((*scf++) + (*pretab++)) << shift]; + cb = *m++; + } + { + register short *val = h->table; + while((y=*val++)<0) { + if (get1bit(mp)) + val -= y; + part2remain--; + } + x = y >> 4; + y &= 0xf; + } + if (x == 15) { + max = cb; + part2remain -= h->linbits+1; + x += getbits(mp, h->linbits); + if(get1bit(mp)) + *xrpnt++ = -ispow[x] * v; + else + *xrpnt++ = ispow[x] * v; + } + else if(x) { + max = cb; + if(get1bit(mp)) + *xrpnt++ = -ispow[x] * v; + else + *xrpnt++ = ispow[x] * v; + part2remain--; + } + else + *xrpnt++ = 0.0; + + if (y == 15) { + max = cb; + part2remain -= h->linbits+1; + y += getbits(mp, h->linbits); + if(get1bit(mp)) + *xrpnt++ = -ispow[y] * v; + else + *xrpnt++ = ispow[y] * v; + } + else if(y) { + max = cb; + if(get1bit(mp)) + *xrpnt++ = -ispow[y] * v; + else + *xrpnt++ = ispow[y] * v; + part2remain--; + } + else + *xrpnt++ = 0.0; + } + } + + /* + * short (count1table) values + */ + for(;l3 && (part2remain > 0);l3--) { + struct newhuff *h = htc+gr_info->count1table_select; + register short *val = h->table,a; + + while((a=*val++)<0) { + part2remain--; + if(part2remain < 0) { + part2remain++; + a = 0; + break; + } + if (get1bit(mp)) + val -= a; + } + + for(i=0;i<4;i++) { + if(!(i & 1)) { + if(!mc) { + mc = *m++; + cb = *m++; + v = gr_info->pow2gain[((*scf++) + (*pretab++)) << shift]; + } + mc--; + } + if ( (a & (0x8>>i)) ) { + max = cb; + part2remain--; + if(part2remain < 0) { + part2remain++; + break; + } + if(get1bit(mp)) + *xrpnt++ = -v; + else + *xrpnt++ = v; + } + else + *xrpnt++ = 0.0; + } + } + + /* + * zero part + */ + for(i=(&xr[SBLIMIT][0]-xrpnt)>>1;i;i--) { + *xrpnt++ = 0.0; + *xrpnt++ = 0.0; + } + + gr_info->maxbandl = max+1; + gr_info->maxb = (mp->longLimit)[sfreq][gr_info->maxbandl]; + } + + while( part2remain > 16 ) { + getbits(mp, 16); /* Dismiss stuffing Bits */ + part2remain -= 16; + } + if(part2remain > 0) + getbits(mp, part2remain); + else if(part2remain < 0) { + //printf("mpg123: Can't rewind stream by %d bits!\n",-part2remain); + return 1; /* -> error */ + } + return 0; +} + +#if 0 +static int III_dequantize_sample_ms(real xr[2][SBLIMIT][SSLIMIT],int *scf, + struct gr_info_s *gr_info,int sfreq,int part2bits) +{ + int shift = 1 + gr_info->scalefac_scale; + real *xrpnt = (real *) xr[1]; + real *xr0pnt = (real *) xr[0]; + int l[3],l3; + int part2remain = gr_info->part2_3_length - part2bits; + int *me; + + { + int bv = gr_info->big_values; + int region1 = gr_info->region1start; + int region2 = gr_info->region2start; + + l3 = ((576>>1)-bv)>>1; +/* + * we may lose the 'odd' bit here !! + * check this later gain + */ + if(bv <= region1) { + l[0] = bv; l[1] = 0; l[2] = 0; + } + else { + l[0] = region1; + if(bv <= region2) { + l[1] = bv - l[0]; l[2] = 0; + } + else { + l[1] = region2 - l[0]; l[2] = bv - region2; + } + } + } + + if(gr_info->block_type == 2) { + int i,max[4]; + int step=0,lwin=0,cb=0; + register real v = 0.0; + register int *m,mc = 0; + + if(gr_info->mixed_block_flag) { + max[3] = -1; + max[0] = max[1] = max[2] = 2; + m = map[sfreq][0]; + me = mapend[sfreq][0]; + } + else { + max[0] = max[1] = max[2] = max[3] = -1; + /* max[3] not really needed in this case */ + m = map[sfreq][1]; + me = mapend[sfreq][1]; + } + + for(i=0;i<2;i++) { + int lp = l[i]; + struct newhuff *h = ht+gr_info->table_select[i]; + for(;lp;lp--,mc--) { + int x,y; + + if(!mc) { + mc = *m++; + xrpnt = ((real *) xr[1]) + *m; + xr0pnt = ((real *) xr[0]) + *m++; + lwin = *m++; + cb = *m++; + if(lwin == 3) { + v = gr_info->pow2gain[(*scf++) << shift]; + step = 1; + } + else { + v = gr_info->full_gain[lwin][(*scf++) << shift]; + step = 3; + } + } + { + register short *val = h->table; + while((y=*val++)<0) { + if (get1bit(mp)) + val -= y; + part2remain--; + } + x = y >> 4; + y &= 0xf; + } + if(x == 15) { + max[lwin] = cb; + part2remain -= h->linbits+1; + x += getbits(mp, h->linbits); + if(get1bit(mp)) { + real a = ispow[x] * v; + *xrpnt = *xr0pnt + a; + *xr0pnt -= a; + } + else { + real a = ispow[x] * v; + *xrpnt = *xr0pnt - a; + *xr0pnt += a; + } + } + else if(x) { + max[lwin] = cb; + if(get1bit(mp)) { + real a = ispow[x] * v; + *xrpnt = *xr0pnt + a; + *xr0pnt -= a; + } + else { + real a = ispow[x] * v; + *xrpnt = *xr0pnt - a; + *xr0pnt += a; + } + part2remain--; + } + else + *xrpnt = *xr0pnt; + xrpnt += step; + xr0pnt += step; + + if(y == 15) { + max[lwin] = cb; + part2remain -= h->linbits+1; + y += getbits(mp, h->linbits); + if(get1bit(mp)) { + real a = ispow[y] * v; + *xrpnt = *xr0pnt + a; + *xr0pnt -= a; + } + else { + real a = ispow[y] * v; + *xrpnt = *xr0pnt - a; + *xr0pnt += a; + } + } + else if(y) { + max[lwin] = cb; + if(get1bit(mp)) { + real a = ispow[y] * v; + *xrpnt = *xr0pnt + a; + *xr0pnt -= a; + } + else { + real a = ispow[y] * v; + *xrpnt = *xr0pnt - a; + *xr0pnt += a; + } + part2remain--; + } + else + *xrpnt = *xr0pnt; + xrpnt += step; + xr0pnt += step; + } + } + + for(;l3 && (part2remain > 0);l3--) { + struct newhuff *h = htc+gr_info->count1table_select; + register short *val = h->table,a; + + while((a=*val++)<0) { + part2remain--; + if(part2remain < 0) { + part2remain++; + a = 0; + break; + } + if (get1bit(mp)) + val -= a; + } + + for(i=0;i<4;i++) { + if(!(i & 1)) { + if(!mc) { + mc = *m++; + xrpnt = ((real *) xr[1]) + *m; + xr0pnt = ((real *) xr[0]) + *m++; + lwin = *m++; + cb = *m++; + if(lwin == 3) { + v = gr_info->pow2gain[(*scf++) << shift]; + step = 1; + } + else { + v = gr_info->full_gain[lwin][(*scf++) << shift]; + step = 3; + } + } + mc--; + } + if( (a & (0x8>>i)) ) { + max[lwin] = cb; + part2remain--; + if(part2remain < 0) { + part2remain++; + break; + } + if(get1bit(mp)) { + *xrpnt = *xr0pnt + v; + *xr0pnt -= v; + } + else { + *xrpnt = *xr0pnt - v; + *xr0pnt += v; + } + } + else + *xrpnt = *xr0pnt; + xrpnt += step; + xr0pnt += step; + } + } + + while( m < me ) { + if(!mc) { + mc = *m++; + xrpnt = ((real *) xr[1]) + *m; + xr0pnt = ((real *) xr[0]) + *m++; + if(*m++ == 3) + step = 1; + else + step = 3; + m++; /* cb */ + } + mc--; + *xrpnt = *xr0pnt; + xrpnt += step; + xr0pnt += step; + *xrpnt = *xr0pnt; + xrpnt += step; + xr0pnt += step; +/* we could add a little opt. here: + * if we finished a band for window 3 or a long band + * further bands could copied in a simple loop without a + * special 'map' decoding + */ + } + + gr_info->maxband[0] = max[0]+1; + gr_info->maxband[1] = max[1]+1; + gr_info->maxband[2] = max[2]+1; + gr_info->maxbandl = max[3]+1; + + { + int rmax = max[0] > max[1] ? max[0] : max[1]; + rmax = (rmax > max[2] ? rmax : max[2]) + 1; + gr_info->maxb = rmax ? (mp->shortLimit)[sfreq][rmax] : (mp->longLimit)[sfreq][max[3]+1]; + } + } + else { + int *pretab = gr_info->preflag ? pretab1 : pretab2; + int i,max = -1; + int cb = 0; + register int mc=0,*m = map[sfreq][2]; + register real v = 0.0; +#if 0 + me = mapend[sfreq][2]; +#endif + + for(i=0;i<3;i++) { + int lp = l[i]; + struct newhuff *h = ht+gr_info->table_select[i]; + + for(;lp;lp--,mc--) { + int x,y; + if(!mc) { + mc = *m++; + cb = *m++; + v = gr_info->pow2gain[((*scf++) + (*pretab++)) << shift]; + } + { + register short *val = h->table; + while((y=*val++)<0) { + if (get1bit(mp)) + val -= y; + part2remain--; + } + x = y >> 4; + y &= 0xf; + } + if (x == 15) { + max = cb; + part2remain -= h->linbits+1; + x += getbits(mp, h->linbits); + if(get1bit(mp)) { + real a = ispow[x] * v; + *xrpnt++ = *xr0pnt + a; + *xr0pnt++ -= a; + } + else { + real a = ispow[x] * v; + *xrpnt++ = *xr0pnt - a; + *xr0pnt++ += a; + } + } + else if(x) { + max = cb; + if(get1bit(mp)) { + real a = ispow[x] * v; + *xrpnt++ = *xr0pnt + a; + *xr0pnt++ -= a; + } + else { + real a = ispow[x] * v; + *xrpnt++ = *xr0pnt - a; + *xr0pnt++ += a; + } + part2remain--; + } + else + *xrpnt++ = *xr0pnt++; + + if (y == 15) { + max = cb; + part2remain -= h->linbits+1; + y += getbits(mp, h->linbits); + if(get1bit(mp)) { + real a = ispow[y] * v; + *xrpnt++ = *xr0pnt + a; + *xr0pnt++ -= a; + } + else { + real a = ispow[y] * v; + *xrpnt++ = *xr0pnt - a; + *xr0pnt++ += a; + } + } + else if(y) { + max = cb; + if(get1bit(mp)) { + real a = ispow[y] * v; + *xrpnt++ = *xr0pnt + a; + *xr0pnt++ -= a; + } + else { + real a = ispow[y] * v; + *xrpnt++ = *xr0pnt - a; + *xr0pnt++ += a; + } + part2remain--; + } + else + *xrpnt++ = *xr0pnt++; + } + } + + for(;l3 && (part2remain > 0);l3--) { + struct newhuff *h = htc+gr_info->count1table_select; + register short *val = h->table,a; + + while((a=*val++)<0) { + part2remain--; + if(part2remain < 0) { + part2remain++; + a = 0; + break; + } + if (get1bit(mp)) + val -= a; + } + + for(i=0;i<4;i++) { + if(!(i & 1)) { + if(!mc) { + mc = *m++; + cb = *m++; + v = gr_info->pow2gain[((*scf++) + (*pretab++)) << shift]; + } + mc--; + } + if ( (a & (0x8>>i)) ) { + max = cb; + part2remain--; + if(part2remain <= 0) { + part2remain++; + break; + } + if(get1bit(mp)) { + *xrpnt++ = *xr0pnt + v; + *xr0pnt++ -= v; + } + else { + *xrpnt++ = *xr0pnt - v; + *xr0pnt++ += v; + } + } + else + *xrpnt++ = *xr0pnt++; + } + } + for(i=(&xr[1][SBLIMIT][0]-xrpnt)>>1;i;i--) { + *xrpnt++ = *xr0pnt++; + *xrpnt++ = *xr0pnt++; + } + + gr_info->maxbandl = max+1; + gr_info->maxb = longLimit[sfreq][gr_info->maxbandl]; + } + + while ( part2remain > 16 ) { + getbits(mp, 16); /* Dismiss stuffing Bits */ + part2remain -= 16; + } + if(part2remain > 0 ) + getbits(mp, part2remain); + else if(part2remain < 0) { + //printf("mpg123_ms: Can't rewind stream by %d bits!\n",-part2remain); + return 1; /* -> error */ + } + return 0; +} +#endif + +/* + * III_stereo: calculate real channel values for Joint-I-Stereo-mode + */ +static void III_i_stereo(real xr_buf[2][SBLIMIT][SSLIMIT],int *scalefac, + struct gr_info_s *gr_info,int sfreq,int ms_stereo,int lsf) +{ + real (*xr)[SBLIMIT*SSLIMIT] = (real (*)[SBLIMIT*SSLIMIT] ) xr_buf; + struct bandInfoStruct *bi = &bandInfo[sfreq]; + real *tab1,*tab2; + + if(lsf) { + int p = gr_info->scalefac_compress & 0x1; + if(ms_stereo) { + tab1 = pow1_2[p]; tab2 = pow2_2[p]; + } + else { + tab1 = pow1_1[p]; tab2 = pow2_1[p]; + } + } + else { + if(ms_stereo) { + tab1 = tan1_2; tab2 = tan2_2; + } + else { + tab1 = tan1_1; tab2 = tan2_1; + } + } + + if (gr_info->block_type == 2) + { + int lwin,do_l = 0; + if( gr_info->mixed_block_flag ) + do_l = 1; + + for (lwin=0;lwin<3;lwin++) /* process each window */ + { + /* get first band with zero values */ + int is_p,sb,idx,sfb = gr_info->maxband[lwin]; /* sfb is minimal 3 for mixed mode */ + if(sfb > 3) + do_l = 0; + + for(;sfb<12;sfb++) + { + is_p = scalefac[sfb*3+lwin-gr_info->mixed_block_flag]; /* scale: 0-15 */ + if(is_p != 7) { + real t1,t2; + sb = bi->shortDiff[sfb]; + idx = bi->shortIdx[sfb] + lwin; + t1 = tab1[is_p]; t2 = tab2[is_p]; + for (; sb > 0; sb--,idx+=3) + { + real v = xr[0][idx]; + xr[0][idx] = v * t1; + xr[1][idx] = v * t2; + } + } + } + +#if 1 +/* in the original: copy 10 to 11 , here: copy 11 to 12 +maybe still wrong??? (copy 12 to 13?) */ + is_p = scalefac[11*3+lwin-gr_info->mixed_block_flag]; /* scale: 0-15 */ + sb = bi->shortDiff[12]; + idx = bi->shortIdx[12] + lwin; +#else + is_p = scalefac[10*3+lwin-gr_info->mixed_block_flag]; /* scale: 0-15 */ + sb = bi->shortDiff[11]; + idx = bi->shortIdx[11] + lwin; +#endif + if(is_p != 7) + { + real t1,t2; + t1 = tab1[is_p]; t2 = tab2[is_p]; + for ( ; sb > 0; sb--,idx+=3 ) + { + real v = xr[0][idx]; + xr[0][idx] = v * t1; + xr[1][idx] = v * t2; + } + } + } /* end for(lwin; .. ; . ) */ + + if (do_l) + { +/* also check l-part, if ALL bands in the three windows are 'empty' + * and mode = mixed_mode + */ + int sfb = gr_info->maxbandl; + int idx = bi->longIdx[sfb]; + + for ( ; sfb<8; sfb++ ) + { + int sb = bi->longDiff[sfb]; + int is_p = scalefac[sfb]; /* scale: 0-15 */ + if(is_p != 7) { + real t1,t2; + t1 = tab1[is_p]; t2 = tab2[is_p]; + for ( ; sb > 0; sb--,idx++) + { + real v = xr[0][idx]; + xr[0][idx] = v * t1; + xr[1][idx] = v * t2; + } + } + else + idx += sb; + } + } + } + else /* ((gr_info->block_type != 2)) */ + { + int sfb = gr_info->maxbandl; + int is_p,idx = bi->longIdx[sfb]; + for ( ; sfb<21; sfb++) + { + int sb = bi->longDiff[sfb]; + is_p = scalefac[sfb]; /* scale: 0-15 */ + if(is_p != 7) { + real t1,t2; + t1 = tab1[is_p]; t2 = tab2[is_p]; + for ( ; sb > 0; sb--,idx++) + { + real v = xr[0][idx]; + xr[0][idx] = v * t1; + xr[1][idx] = v * t2; + } + } + else + idx += sb; + } + + is_p = scalefac[20]; /* copy l-band 20 to l-band 21 */ + if(is_p != 7) + { + int sb; + real t1 = tab1[is_p],t2 = tab2[is_p]; + + for ( sb = bi->longDiff[21]; sb > 0; sb--,idx++ ) + { + real v = xr[0][idx]; + xr[0][idx] = v * t1; + xr[1][idx] = v * t2; + } + } + } /* ... */ +} + +static void III_antialias(real xr[SBLIMIT][SSLIMIT],struct gr_info_s *gr_info) +{ + int sblim; + + if(gr_info->block_type == 2) + { + if(!gr_info->mixed_block_flag) + return; + sblim = 1; + } + else { + sblim = gr_info->maxb-1; + } + + /* 31 alias-reduction operations between each pair of sub-bands */ + /* with 8 butterflies between each pair */ + + { + int sb; + real *xr1=(real *) xr[1]; + + for(sb=sblim;sb;sb--,xr1+=10) + { + int ss; + real *cs=aa_cs,*ca=aa_ca; + real *xr2 = xr1; + + for(ss=7;ss>=0;ss--) + { /* upper and lower butterfly inputs */ + register real bu = *--xr2,bd = *xr1; + *xr2 = (bu * (*cs) ) - (bd * (*ca) ); + *xr1++ = (bd * (*cs++) ) + (bu * (*ca++) ); + } + } + } +} + +/* + DCT insipired by Jeff Tsay's DCT from the maplay package + this is an optimized version with manual unroll. + + References: + [1] S. Winograd: "On Computing the Discrete Fourier Transform", + Mathematics of Computation, Volume 32, Number 141, January 1978, + Pages 175-199 +*/ + +static void dct36(real *inbuf,real *o1,real *o2,real *wintab,real *tsbuf) +{ + { + register real *in = inbuf; + + in[17]+=in[16]; in[16]+=in[15]; in[15]+=in[14]; + in[14]+=in[13]; in[13]+=in[12]; in[12]+=in[11]; + in[11]+=in[10]; in[10]+=in[9]; in[9] +=in[8]; + in[8] +=in[7]; in[7] +=in[6]; in[6] +=in[5]; + in[5] +=in[4]; in[4] +=in[3]; in[3] +=in[2]; + in[2] +=in[1]; in[1] +=in[0]; + + in[17]+=in[15]; in[15]+=in[13]; in[13]+=in[11]; in[11]+=in[9]; + in[9] +=in[7]; in[7] +=in[5]; in[5] +=in[3]; in[3] +=in[1]; + + + { + +#define MACRO0(v) { \ + real tmp; \ + out2[9+(v)] = (tmp = sum0 + sum1) * w[27+(v)]; \ + out2[8-(v)] = tmp * w[26-(v)]; } \ + sum0 -= sum1; \ + ts[SBLIMIT*(8-(v))] = out1[8-(v)] + sum0 * w[8-(v)]; \ + ts[SBLIMIT*(9+(v))] = out1[9+(v)] + sum0 * w[9+(v)]; +#define MACRO1(v) { \ + real sum0,sum1; \ + sum0 = tmp1a + tmp2a; \ + sum1 = (tmp1b + tmp2b) * tfcos36[(v)]; \ + MACRO0(v); } +#define MACRO2(v) { \ + real sum0,sum1; \ + sum0 = tmp2a - tmp1a; \ + sum1 = (tmp2b - tmp1b) * tfcos36[(v)]; \ + MACRO0(v); } + + register const real *c = COS9; + register real *out2 = o2; + register real *w = wintab; + register real *out1 = o1; + register real *ts = tsbuf; + + real ta33,ta66,tb33,tb66; + + ta33 = in[2*3+0] * c[3]; + ta66 = in[2*6+0] * c[6]; + tb33 = in[2*3+1] * c[3]; + tb66 = in[2*6+1] * c[6]; + + { + real tmp1a,tmp2a,tmp1b,tmp2b; + tmp1a = in[2*1+0] * c[1] + ta33 + in[2*5+0] * c[5] + in[2*7+0] * c[7]; + tmp1b = in[2*1+1] * c[1] + tb33 + in[2*5+1] * c[5] + in[2*7+1] * c[7]; + tmp2a = in[2*0+0] + in[2*2+0] * c[2] + in[2*4+0] * c[4] + ta66 + in[2*8+0] * c[8]; + tmp2b = in[2*0+1] + in[2*2+1] * c[2] + in[2*4+1] * c[4] + tb66 + in[2*8+1] * c[8]; + + MACRO1(0); + MACRO2(8); + } + + { + real tmp1a,tmp2a,tmp1b,tmp2b; + tmp1a = ( in[2*1+0] - in[2*5+0] - in[2*7+0] ) * c[3]; + tmp1b = ( in[2*1+1] - in[2*5+1] - in[2*7+1] ) * c[3]; + tmp2a = ( in[2*2+0] - in[2*4+0] - in[2*8+0] ) * c[6] - in[2*6+0] + in[2*0+0]; + tmp2b = ( in[2*2+1] - in[2*4+1] - in[2*8+1] ) * c[6] - in[2*6+1] + in[2*0+1]; + + MACRO1(1); + MACRO2(7); + } + + { + real tmp1a,tmp2a,tmp1b,tmp2b; + tmp1a = in[2*1+0] * c[5] - ta33 - in[2*5+0] * c[7] + in[2*7+0] * c[1]; + tmp1b = in[2*1+1] * c[5] - tb33 - in[2*5+1] * c[7] + in[2*7+1] * c[1]; + tmp2a = in[2*0+0] - in[2*2+0] * c[8] - in[2*4+0] * c[2] + ta66 + in[2*8+0] * c[4]; + tmp2b = in[2*0+1] - in[2*2+1] * c[8] - in[2*4+1] * c[2] + tb66 + in[2*8+1] * c[4]; + + MACRO1(2); + MACRO2(6); + } + + { + real tmp1a,tmp2a,tmp1b,tmp2b; + tmp1a = in[2*1+0] * c[7] - ta33 + in[2*5+0] * c[1] - in[2*7+0] * c[5]; + tmp1b = in[2*1+1] * c[7] - tb33 + in[2*5+1] * c[1] - in[2*7+1] * c[5]; + tmp2a = in[2*0+0] - in[2*2+0] * c[4] + in[2*4+0] * c[8] + ta66 - in[2*8+0] * c[2]; + tmp2b = in[2*0+1] - in[2*2+1] * c[4] + in[2*4+1] * c[8] + tb66 - in[2*8+1] * c[2]; + + MACRO1(3); + MACRO2(5); + } + + { + real sum0,sum1; + sum0 = in[2*0+0] - in[2*2+0] + in[2*4+0] - in[2*6+0] + in[2*8+0]; + sum1 = (in[2*0+1] - in[2*2+1] + in[2*4+1] - in[2*6+1] + in[2*8+1] ) * tfcos36[4]; + MACRO0(4); + } + } + + } +} + +/* + * new DCT12 + */ +static void dct12(real *in,real *rawout1,real *rawout2,register real *wi,register real *ts) +{ +#define DCT12_PART1 \ + in5 = in[5*3]; \ + in5 += (in4 = in[4*3]); \ + in4 += (in3 = in[3*3]); \ + in3 += (in2 = in[2*3]); \ + in2 += (in1 = in[1*3]); \ + in1 += (in0 = in[0*3]); \ + \ + in5 += in3; in3 += in1; \ + \ + in2 *= COS6_1; \ + in3 *= COS6_1; \ + +#define DCT12_PART2 \ + in0 += in4 * COS6_2; \ + \ + in4 = in0 + in2; \ + in0 -= in2; \ + \ + in1 += in5 * COS6_2; \ + \ + in5 = (in1 + in3) * tfcos12[0]; \ + in1 = (in1 - in3) * tfcos12[2]; \ + \ + in3 = in4 + in5; \ + in4 -= in5; \ + \ + in2 = in0 + in1; \ + in0 -= in1; + + + { + real in0,in1,in2,in3,in4,in5; + register real *out1 = rawout1; + ts[SBLIMIT*0] = out1[0]; ts[SBLIMIT*1] = out1[1]; ts[SBLIMIT*2] = out1[2]; + ts[SBLIMIT*3] = out1[3]; ts[SBLIMIT*4] = out1[4]; ts[SBLIMIT*5] = out1[5]; + + DCT12_PART1 + + { + real tmp0,tmp1 = (in0 - in4); + { + real tmp2 = (in1 - in5) * tfcos12[1]; + tmp0 = tmp1 + tmp2; + tmp1 -= tmp2; + } + ts[(17-1)*SBLIMIT] = out1[17-1] + tmp0 * wi[11-1]; + ts[(12+1)*SBLIMIT] = out1[12+1] + tmp0 * wi[6+1]; + ts[(6 +1)*SBLIMIT] = out1[6 +1] + tmp1 * wi[1]; + ts[(11-1)*SBLIMIT] = out1[11-1] + tmp1 * wi[5-1]; + } + + DCT12_PART2 + + ts[(17-0)*SBLIMIT] = out1[17-0] + in2 * wi[11-0]; + ts[(12+0)*SBLIMIT] = out1[12+0] + in2 * wi[6+0]; + ts[(12+2)*SBLIMIT] = out1[12+2] + in3 * wi[6+2]; + ts[(17-2)*SBLIMIT] = out1[17-2] + in3 * wi[11-2]; + + ts[(6+0)*SBLIMIT] = out1[6+0] + in0 * wi[0]; + ts[(11-0)*SBLIMIT] = out1[11-0] + in0 * wi[5-0]; + ts[(6+2)*SBLIMIT] = out1[6+2] + in4 * wi[2]; + ts[(11-2)*SBLIMIT] = out1[11-2] + in4 * wi[5-2]; + } + + in++; + + { + real in0,in1,in2,in3,in4,in5; + register real *out2 = rawout2; + + DCT12_PART1 + + { + real tmp0,tmp1 = (in0 - in4); + { + real tmp2 = (in1 - in5) * tfcos12[1]; + tmp0 = tmp1 + tmp2; + tmp1 -= tmp2; + } + out2[5-1] = tmp0 * wi[11-1]; + out2[0+1] = tmp0 * wi[6+1]; + ts[(12+1)*SBLIMIT] += tmp1 * wi[1]; + ts[(17-1)*SBLIMIT] += tmp1 * wi[5-1]; + } + + DCT12_PART2 + + out2[5-0] = in2 * wi[11-0]; + out2[0+0] = in2 * wi[6+0]; + out2[0+2] = in3 * wi[6+2]; + out2[5-2] = in3 * wi[11-2]; + + ts[(12+0)*SBLIMIT] += in0 * wi[0]; + ts[(17-0)*SBLIMIT] += in0 * wi[5-0]; + ts[(12+2)*SBLIMIT] += in4 * wi[2]; + ts[(17-2)*SBLIMIT] += in4 * wi[5-2]; + } + + in++; + + { + real in0,in1,in2,in3,in4,in5; + register real *out2 = rawout2; + out2[12]=out2[13]=out2[14]=out2[15]=out2[16]=out2[17]=0.0; + + DCT12_PART1 + + { + real tmp0,tmp1 = (in0 - in4); + { + real tmp2 = (in1 - in5) * tfcos12[1]; + tmp0 = tmp1 + tmp2; + tmp1 -= tmp2; + } + out2[11-1] = tmp0 * wi[11-1]; + out2[6 +1] = tmp0 * wi[6+1]; + out2[0+1] += tmp1 * wi[1]; + out2[5-1] += tmp1 * wi[5-1]; + } + + DCT12_PART2 + + out2[11-0] = in2 * wi[11-0]; + out2[6 +0] = in2 * wi[6+0]; + out2[6 +2] = in3 * wi[6+2]; + out2[11-2] = in3 * wi[11-2]; + + out2[0+0] += in0 * wi[0]; + out2[5-0] += in0 * wi[5-0]; + out2[0+2] += in4 * wi[2]; + out2[5-2] += in4 * wi[5-2]; + } +} + +/* + * III_hybrid + */ +static void III_hybrid(struct mpstr *mp, real fsIn[SBLIMIT][SSLIMIT],real tsOut[SSLIMIT][SBLIMIT], + int ch,struct gr_info_s *gr_info) +{ + real *tspnt = (real *) tsOut; + real (*block)[2][SBLIMIT*SSLIMIT] = mp->hybrid_block; + int *blc = mp->hybrid_blc; + real *rawout1,*rawout2; + int bt; + int sb = 0; + + { + int b = blc[ch]; + rawout1=block[b][ch]; + b=-b+1; + rawout2=block[b][ch]; + blc[ch] = b; + } + + + if(gr_info->mixed_block_flag) { + sb = 2; + dct36(fsIn[0],rawout1,rawout2,win[0],tspnt); + dct36(fsIn[1],rawout1+18,rawout2+18,win1[0],tspnt+1); + rawout1 += 36; rawout2 += 36; tspnt += 2; + } + + bt = gr_info->block_type; + if(bt == 2) { + for (; sb<gr_info->maxb; sb+=2,tspnt+=2,rawout1+=36,rawout2+=36) { + dct12(fsIn[sb],rawout1,rawout2,win[2],tspnt); + dct12(fsIn[sb+1],rawout1+18,rawout2+18,win1[2],tspnt+1); + } + } + else { + for (; sb<gr_info->maxb; sb+=2,tspnt+=2,rawout1+=36,rawout2+=36) { + dct36(fsIn[sb],rawout1,rawout2,win[bt],tspnt); + dct36(fsIn[sb+1],rawout1+18,rawout2+18,win1[bt],tspnt+1); + } + } + + for(;sb<SBLIMIT;sb++,tspnt++) { + int i; + for(i=0;i<SSLIMIT;i++) { + tspnt[i*SBLIMIT] = *rawout1++; + *rawout2++ = 0.0; + } + } +} + +/* + * main layer3 handler + */ +int do_layer3(struct mpstr *mp,unsigned char *pcm_sample,int *pcm_point) +{ + + int gr, ch, ss,clip=0; + int scalefacs[39]; /* max 39 for short[13][3] mode, mixed: 38, long: 22 */ + struct III_sideinfo sideinfo; + struct frame *fr; + int stereo, single, sfreq; + int ms_stereo,i_stereo; + int stereo1,granules; + + fr = &(mp->fr); + stereo = fr->stereo; + single = fr->single; + sfreq = fr->sampling_frequency; + + + + if(stereo == 1) { /* stream is mono */ + stereo1 = 1; + single = 0; + } + else if(single >= 0) /* stream is stereo, but force to mono */ + stereo1 = 1; + else + stereo1 = 2; + + if(fr->mode == MPG_MD_JOINT_STEREO) { + ms_stereo = fr->mode_ext & 0x2; + i_stereo = fr->mode_ext & 0x1; + } + else + ms_stereo = i_stereo = 0; + + if(fr->lsf) { + granules = 1; + if (III_get_side_info_2(mp, &sideinfo,stereo,ms_stereo,sfreq,single)) + return (MP3_ERR); + } + else { + granules = 2; +#ifdef MPEG1 + if ( III_get_side_info_1(mp, &sideinfo,stereo,ms_stereo,sfreq,single)) + return (MP3_ERR); + +#else + //printf("Not supported\n"); +#endif + } + + if(set_pointer(mp, sideinfo.main_data_begin) == MP3_ERR) + return 0; + + for (gr=0;gr<granules;gr++) + { + static real hybridIn[2][SBLIMIT][SSLIMIT]; + static real hybridOut[2][SSLIMIT][SBLIMIT]; + + { + struct gr_info_s *gr_info = &(sideinfo.ch[0].gr[gr]); + long part2bits; + if(fr->lsf) + part2bits = III_get_scale_factors_2(mp, scalefacs,gr_info,0); + else { +#ifdef MPEG1 + part2bits = III_get_scale_factors_1(mp, scalefacs,gr_info); +#else + //printf("Not supported\n"); +#endif + } + if(III_dequantize_sample(mp, hybridIn[0], scalefacs,gr_info,sfreq,part2bits)) + return (MP3_ERR); + } + if(stereo == 2) { + struct gr_info_s *gr_info = &(sideinfo.ch[1].gr[gr]); + long part2bits; + if(fr->lsf) + part2bits = III_get_scale_factors_2(mp, scalefacs,gr_info,i_stereo); + else { +#ifdef MPEG1 + part2bits = III_get_scale_factors_1(mp, scalefacs,gr_info); +#else + //printf("Not supported\n"); +#endif + } + + if(III_dequantize_sample(mp, hybridIn[1],scalefacs,gr_info,sfreq,part2bits)) + return (MP3_ERR); + + if(ms_stereo) { + int i; + for(i=0;i<SBLIMIT*SSLIMIT;i++) { + real tmp0,tmp1; + tmp0 = ((real *) hybridIn[0])[i]; + tmp1 = ((real *) hybridIn[1])[i]; + ((real *) hybridIn[1])[i] = tmp0 - tmp1; + ((real *) hybridIn[0])[i] = tmp0 + tmp1; + } + } + + if(i_stereo) + III_i_stereo(hybridIn,scalefacs,gr_info,sfreq,ms_stereo,fr->lsf); + + if(ms_stereo || i_stereo || (single == 3) ) { + if(gr_info->maxb > sideinfo.ch[0].gr[gr].maxb) + sideinfo.ch[0].gr[gr].maxb = gr_info->maxb; + else + gr_info->maxb = sideinfo.ch[0].gr[gr].maxb; + } + + switch(single) { + case 3: + { + register int i; + register real *in0 = (real *) hybridIn[0],*in1 = (real *) hybridIn[1]; + for(i=0;i<SSLIMIT*gr_info->maxb;i++,in0++) + *in0 = (*in0 + *in1++); /* *0.5 done by pow-scale */ + } + break; + case 1: + { + register int i; + register real *in0 = (real *) hybridIn[0],*in1 = (real *) hybridIn[1]; + for(i=0;i<SSLIMIT*gr_info->maxb;i++) + *in0++ = *in1++; + } + break; + } + } + + for(ch=0;ch<stereo1;ch++) { + struct gr_info_s *gr_info = &(sideinfo.ch[ch].gr[gr]); + III_antialias(hybridIn[ch],gr_info); + III_hybrid(mp, hybridIn[ch], hybridOut[ch], ch,gr_info); + } + + for(ss=0;ss<SSLIMIT;ss++) { + if(single >= 0) { + clip += synth_ntom_mono(mp,hybridOut[0][ss],pcm_sample,pcm_point); + } + else { + int p1 = *pcm_point; + clip += synth_ntom(mp,hybridOut[0][ss],0,pcm_sample,&p1); + clip += synth_ntom(mp,hybridOut[1][ss],1,pcm_sample,pcm_point); + } + } + } + + return 0; +} + + Modified: freeswitch/trunk/src/mod/formats/mod_shout/mod_shout.c ============================================================================== --- freeswitch/trunk/src/mod/formats/mod_shout/mod_shout.c (original) +++ freeswitch/trunk/src/mod/formats/mod_shout/mod_shout.c Mon Mar 12 22:02:28 2007 @@ -30,9 +30,16 @@ * example filename: shout://user:pass@host.com/mount.mp3 * */ +#include "mpg123.h" +#include "mpglib.h" #include <switch.h> #include <shout/shout.h> #include <lame/lame.h> +#include <curl/curl.h> + + +#define OUTSCALE 4096 +#define MP3BUFLEN OUTSCALE * 2 static const char modname[] = "mod_shout"; @@ -42,6 +49,12 @@ struct shout_context { shout_t *shout; lame_global_flags *gfp; + char *stream_url; + switch_mutex_t *audio_mutex; + switch_buffer_t *audio_buffer; + switch_memory_pool_t *memory_pool; + char decode_buf[MP3BUFLEN]; + struct mpstr mp; }; typedef struct shout_context shout_context_t; @@ -49,10 +62,15 @@ static inline void free_context(shout_context_t *context) { if (context) { + if (context->audio_buffer) { + switch_buffer_destroy(&context->audio_buffer); + } + if (context->shout) { shout_close(context->shout); context->shout = NULL; } + if (context->gfp) { lame_close(context->gfp); context->gfp = NULL; @@ -140,6 +158,50 @@ } +static size_t stream_callback(void *ptr, size_t size, size_t nmemb, void *data) +{ + register unsigned int realsize = (unsigned int)(size * nmemb); + shout_context_t *context = data; + int dlen; + + decodeMP3(&context->mp, data, realsize, context->decode_buf, sizeof(context->decode_buf), &dlen); + + switch_mutex_lock(context->audio_mutex); + switch_buffer_write(context->audio_buffer, context->decode_buf, dlen); + switch_mutex_unlock(context->audio_mutex); + + return realsize; +} + + +#define MY_BUF_LEN 1024 * 32 +#define MY_BLOCK_SIZE MY_BUF_LEN +static void *SWITCH_THREAD_FUNC stream_thread(switch_thread_t *thread, void *obj) +{ + CURL *curl_handle = NULL; + shout_context_t *context = (shout_context_t *) obj; + + curl_easy_setopt(curl_handle, CURLOPT_URL, context->stream_url); + curl_easy_setopt(curl_handle, CURLOPT_WRITEFUNCTION, stream_callback); + curl_easy_setopt(curl_handle, CURLOPT_WRITEDATA, (void *)context); + curl_easy_setopt(curl_handle, CURLOPT_USERAGENT, "FreeSWITCH(mod_shout)/1.0"); + curl_easy_perform(curl_handle); + curl_easy_cleanup(curl_handle); + + return NULL; +} + +static void launch_stream_thread(shout_context_t *context) +{ + switch_thread_t *thread; + switch_threadattr_t *thd_attr = NULL; + + switch_threadattr_create(&thd_attr, context->memory_pool); + switch_threadattr_detach_set(thd_attr, 1); + switch_threadattr_stacksize_set(thd_attr, SWITCH_THREAD_STACKSIZE); + switch_thread_create(&thread, thd_attr, stream_thread, context, context->memory_pool); +} + static switch_status_t shout_file_open(switch_file_handle_t *handle, char *path) { shout_context_t *context; @@ -147,16 +209,6 @@ char *username, *password; char *err = NULL; - if (switch_test_flag(handle, SWITCH_FILE_FLAG_READ)) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Read not currently supported.\n"); - return SWITCH_STATUS_GENERR; - } - - if (!switch_test_flag(handle, SWITCH_FILE_FLAG_WRITE)) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Only write is supported.\n"); - return SWITCH_STATUS_GENERR; - } - if ((context = switch_core_alloc(handle->memory_pool, sizeof(*context))) == 0) { return SWITCH_STATUS_MEMERR; } @@ -171,6 +223,8 @@ goto error; } + context->memory_pool = handle->memory_pool; + lame_set_num_channels(context->gfp, handle->channels); lame_set_in_samplerate(context->gfp, handle->samplerate); lame_set_brate(context->gfp, 24); @@ -185,73 +239,85 @@ lame_init_params(context->gfp); lame_print_config(context->gfp); - username = switch_core_strdup(handle->memory_pool, path); - if (!(password = strchr(username, ':'))) { - err = "invalid url"; - goto error; - } - *password++ = '\0'; - - if (!(host = strchr(password, '@'))) { - err = "invalid url"; - goto error; - } - *host++ = '\0'; + if (switch_test_flag(handle, SWITCH_FILE_FLAG_READ)) { + if (switch_buffer_create_dynamic(&context->audio_buffer, MY_BLOCK_SIZE, MY_BUF_LEN, 0) != SWITCH_STATUS_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Memory Error!\n"); + goto error; + } + switch_mutex_init(&context->audio_mutex, SWITCH_MUTEX_NESTED, context->memory_pool); + InitMP3(&context->mp, OUTSCALE); + context->stream_url = switch_core_sprintf(context->memory_pool, "http://%s", path); + launch_stream_thread(context); + } else if (!switch_test_flag(handle, SWITCH_FILE_FLAG_WRITE)) { + username = switch_core_strdup(handle->memory_pool, path); + if (!(password = strchr(username, ':'))) { + err = "invalid url"; + goto error; + } + *password++ = '\0'; + + if (!(host = strchr(password, '@'))) { + err = "invalid url"; + goto error; + } + *host++ = '\0'; - if ((file = strchr(host, '/'))) { - *file++ = '\0'; - } else { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Invalid URL: %s\n", path); - } + if ((file = strchr(host, '/'))) { + *file++ = '\0'; + } else { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Invalid URL: %s\n", path); + goto error; + } - if (shout_set_host(context->shout, host) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting hostname: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_host(context->shout, host) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting hostname: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_protocol(context->shout, SHOUT_PROTOCOL_HTTP) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting protocol: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_protocol(context->shout, SHOUT_PROTOCOL_HTTP) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting protocol: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_port(context->shout, 8000) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting port: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_port(context->shout, 8000) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting port: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_password(context->shout, password) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting password: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_password(context->shout, password) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting password: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_mount(context->shout, file) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting mount: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_mount(context->shout, file) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting mount: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_user(context->shout, username) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting user: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_user(context->shout, username) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting user: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_url(context->shout, "mod_shout") != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting name: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_url(context->shout, "mod_shout") != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting name: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_audio_info(context->shout, "bitrate", "24000") != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting user: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_audio_info(context->shout, "bitrate", "24000") != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting user: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_set_format(context->shout, SHOUT_FORMAT_MP3) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting user: %s\n", shout_get_error(context->shout)); - goto error; - } + if (shout_set_format(context->shout, SHOUT_FORMAT_MP3) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error setting user: %s\n", shout_get_error(context->shout)); + goto error; + } - if (shout_open(context->shout) != SHOUTERR_SUCCESS) { - switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error opening stream: %s\n", shout_get_error(context->shout)); - goto error; + if (shout_open(context->shout) != SHOUTERR_SUCCESS) { + switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_ERROR, "Error opening stream: %s\n", shout_get_error(context->shout)); + goto error; + } } handle->private_info = context; @@ -279,7 +345,7 @@ static switch_status_t shout_file_seek(switch_file_handle_t *handle, unsigned int *cur_sample, int64_t samples, int whence) { - shout_context_t *context = handle->private_info; + //shout_context_t *context = handle->private_info; return SWITCH_STATUS_FALSE; @@ -288,6 +354,11 @@ static switch_status_t shout_file_read(switch_file_handle_t *handle, void *data, size_t *len) { shout_context_t *context = handle->private_info; + size_t bytes = *len; + + switch_mutex_lock(context->audio_mutex); + *len = switch_buffer_read(context->audio_buffer, data, bytes); + switch_mutex_unlock(context->audio_mutex); return SWITCH_STATUS_FALSE; } @@ -378,6 +449,8 @@ supported_formats[0] = "shout"; shout_file_interface.extens = supported_formats; + curl_global_init(CURL_GLOBAL_ALL); + /* connect my internal structure to the blank pointer passed to me */ *module_interface = &shout_module_interface; @@ -388,6 +461,11 @@ } +SWITCH_MOD_DECLARE(switch_status_t) switch_module_shutdown(void) +{ + curl_global_cleanup(); + return SWITCH_STATUS_SUCCESS; +} /* For Emacs: * Local Variables: Added: freeswitch/trunk/src/mod/formats/mod_shout/mpg123.h ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/mpg123.h Mon Mar 12 22:02:28 2007 @@ -0,0 +1,132 @@ +#include <stdio.h> +#include <string.h> +#include <signal.h> + +#ifndef WIN32 +#include <sys/signal.h> +#include <unistd.h> +#endif + +#include <math.h> + +#ifdef _WIN32 +# undef WIN32 +# define WIN32 + +# define M_PI 3.14159265358979323846 +# define M_SQRT2 1.41421356237309504880 +# define REAL_IS_FLOAT +# define NEW_DCT9 + +# define random rand +# define srandom srand + +#endif + +#ifdef REAL_IS_FLOAT +# define real float +#elif defined(REAL_IS_LONG_DOUBLE) +# define real long double +#else +# define real double +#endif + +#ifdef __GNUC__ +#define INLINE inline +#else +#define INLINE +#endif + +/* AUDIOBUFSIZE = n*64 with n=1,2,3 ... */ +#define AUDIOBUFSIZE 16384 + +#define FALSE 0 +#define TRUE 1 + +#define SBLIMIT 32 +#define SSLIMIT 18 + +#define MPG_MD_STEREO 0 +#define MPG_MD_JOINT_STEREO 1 +#define MPG_MD_DUAL_CHANNEL 2 +#define MPG_MD_MONO 3 + +#define MAXFRAMESIZE 1792 + + +/* Pre Shift fo 16 to 8 bit converter table */ +#define AUSHIFT (3) + +struct frame { + int stereo; + int jsbound; + int single; + int lsf; + int mpeg25; + int header_change; + int lay; + int error_protection; + int bitrate_index; + int sampling_frequency; + int padding; + int extension; + int mode; + int mode_ext; + int copyright; + int original; + int emphasis; + int framesize; /* computed framesize */ +}; + +struct parameter { + int quiet; /* shut up! */ + int tryresync; /* resync stream after error */ + int verbose; /* verbose level */ + int checkrange; +}; + +extern int decode_header(struct frame *fr,unsigned long newhead); + + + +struct gr_info_s { + int scfsi; + unsigned part2_3_length; + unsigned big_values; + unsigned scalefac_compress; + unsigned block_type; + unsigned mixed_block_flag; + unsigned table_select[3]; + unsigned subblock_gain[3]; + unsigned maxband[3]; + unsigned maxbandl; + unsigned maxb; + unsigned region1start; + unsigned region2start; + unsigned preflag; + unsigned scalefac_scale; + unsigned count1table_select; + real *full_gain[3]; + real *pow2gain; +}; + +struct III_sideinfo +{ + unsigned main_data_begin; + unsigned private_bits; + struct { + struct gr_info_s gr[2]; + } ch[2]; +}; + +struct pcm_workingsample +{ + int bitindex; + unsigned char *wordpointer; +}; + + +extern long freqs[9]; +extern struct parameter param; +extern real *pnts[5]; + Added: freeswitch/trunk/src/mod/formats/mod_shout/mpglib.h ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/mpglib.h Mon Mar 12 22:02:28 2007 @@ -0,0 +1,75 @@ + +struct buf { + unsigned char *pnt; + long size; + long pos; + struct buf *next; + struct buf *prev; +}; + +struct framebuf { + struct buf *buf; + long pos; + struct frame *next; + struct frame *prev; +}; + +struct mpstr { + struct buf *head,*tail; + int bsize; + int framesize; + int fsizeold; + struct frame fr; + unsigned char bsspace[2][MAXFRAMESIZE+512]; /* MAXFRAMESIZE */ + real hybrid_block[2][2][SBLIMIT*SSLIMIT]; + int hybrid_blc[2]; + unsigned long header; + int bsnum; + real synth_buffs[2][2][0x110]; + int synth_bo; + long outscale; /* volume control default value 32768 */ + long outsamplerate; /* raw output rate default same as mp3 sample rate*/ + struct pcm_workingsample worksample; /* keep the state of the working sample for threads */ + int initmp3; /* flag for first initialisation */ + int longLimit[9][23]; /*sample limits re setting volume */ + int shortLimit[9][14]; + real decwin[512+32]; /* scale table */ + + }; + +#define BOOL int + +#define MP3_ERR -1 +#define MP3_OK 0 +#define MP3_NEED_MORE 1 + + +void InitMP3Constants(void); +BOOL InitMP3(struct mpstr *mp, long outscale); +int decodeMP3(struct mpstr *mp,char *inmemory,int inmemsize, + char *outmemory,int outmemsize,int *done); +void ExitMP3(struct mpstr *mp); + +extern int synth_ntom_set_step(long,long); +extern int synth_ntom(struct mpstr *mp, real *bandPtr,int channel,unsigned char *out,int *pnt); +extern int synth_ntom_mono (struct mpstr *mp, real *bandPtr,unsigned char *samples,int *pnt); +extern int synth_ntom_8bit (real *,int,unsigned char *,int *); +extern int synth_ntom_mono2stereo (real *,unsigned char *,int *); +extern int synth_ntom_8bit_mono (real *,unsigned char *,int *); +extern int synth_ntom_8bit_mono2stereo (real *,unsigned char *,int *); + +extern void init_layer3_sample_limits(struct mpstr *mp, int down_sample_sblimit); +extern void init_layer3_const(void); +extern int do_layer3(struct mpstr *mp,unsigned char *,int *); + +extern void make_decode_tables_scale(struct mpstr *mp, long scaleval); +extern void make_decode_tables_const(void); +extern void make_conv16to8_table(int); + +extern void dct64(real *,real *,real *); + +extern unsigned int get1bit(struct mpstr *mp); +extern unsigned int getbits(struct mpstr *mp, int); +extern unsigned int getbits_fast(struct mpstr *mp, int); +extern int set_pointer(struct mpstr *mp, long backstep); + Added: freeswitch/trunk/src/mod/formats/mod_shout/tabinit.c ============================================================================== --- (empty file) +++ freeswitch/trunk/src/mod/formats/mod_shout/tabinit.c Mon Mar 12 22:02:28 2007 @@ -0,0 +1,81 @@ + +#include <stdlib.h> + +#include "mpg123.h" +#include "mpglib.h" + +static real cos64[16],cos32[8],cos16[4],cos8[2],cos4[1]; +real *pnts[] = { cos64,cos32,cos16,cos8,cos4 }; + +static long intwinbase[] = { + 0, -1, -1, -1, -1, -1, -1, -2, -2, -2, + -2, -3, -3, -4, -4, -5, -5, -6, -7, -7, + -8, -9, -10, -11, -13, -14, -16, -17, -19, -21, + -24, -26, -29, -31, -35, -38, -41, -45, -49, -53, + -58, -63, -68, -73, -79, -85, -91, -97, -104, -111, + -117, -125, -132, -139, -147, -154, -161, -169, -176, -183, + -190, -196, -202, -208, -213, -218, -222, -225, -227, -228, + -228, -227, -224, -221, -215, -208, -200, -189, -177, -163, + -146, -127, -106, -83, -57, -29, 2, 36, 72, 111, + 153, 197, 244, 294, 347, 401, 459, 519, 581, 645, + 711, 779, 848, 919, 991, 1064, 1137, 1210, 1283, 1356, + 1428, 1498, 1567, 1634, 1698, 1759, 1817, 1870, 1919, 1962, + 2001, 2032, 2057, 2075, 2085, 2087, 2080, 2063, 2037, 2000, + 1952, 1893, 1822, 1739, 1644, 1535, 1414, 1280, 1131, 970, + 794, 605, 402, 185, -45, -288, -545, -814, -1095, -1388, + -1692, -2006, -2330, -2663, -3004, -3351, -3705, -4063, -4425, -4788, + -5153, -5517, -5879, -6237, -6589, -6935, -7271, -7597, -7910, -8209, + -8491, -8755, -8998, -9219, -9416, -9585, -9727, -9838, -9916, -9959, + -9966, -9935, -9863, -9750, -9592, -9389, -9139, -8840, -8492, -8092, + -7640, -7134, -6574, -5959, -5288, -4561, -3776, -2935, -2037, -1082, + -70, 998, 2122, 3300, 4533, 5818, 7154, 8540, 9975, 11455, + 12980, 14548, 16155, 17799, 19478, 21189, 22929, 24694, 26482, 28289, + 30112, 31947, 33791, 35640, 37489, 39336, 41176, 43006, 44821, 46617, + 48390, 50137, 51853, 53534, 55178, 56778, 58333, 59838, 61289, 62684, + 64019, 65290, 66494, 67629, 68692, 69679, 70590, 71420, 72169, 72835, + 73415, 73908, 74313, 74630, 74856, 74992, 75038 }; + +void make_decode_tables_const(void) +{ + int i,k,kr,divv; + real *costab; + + for(i=0;i<5;i++) + { + kr=0x10>>i; divv=0x40>>i; + costab = pnts[i]; + for(k=0;k<kr;k++) + costab[k] = 1.0 / (2.0 * cos(M_PI * ((double) k * 2.0 + 1.0) / (double) divv)); + } + +} + +void make_decode_tables_scale(struct mpstr *mp, long scaleval) +{ + int i,j; + real *table; + + table = mp->decwin; + scaleval = -scaleval; + for(i=0,j=0;i<256;i++,j++,table+=32) + { + if(table < (mp->decwin)+512+16) + table[16] = table[0] = (double) intwinbase[j] / 65536.0 * (double) scaleval; + if(i % 32 == 31) + table -= 1023; + if(i % 64 == 63) + scaleval = - scaleval; + } + + for( /* i=256 */ ;i<512;i++,j--,table+=32) + { + if(table < (mp->decwin)+512+16) + table[16] = table[0] = (double) intwinbase[j] / 65536.0 * (double) scaleval; + if(i % 32 == 31) + table -= 1023; + if(i % 64 == 63) + scaleval = - scaleval; + } +} + +

1 0

[commit] r4575 - in freeswitch/trunk/src: . include
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: anthm Date: Mon Mar 12 16:17:34 2007 New Revision: 4575 Modified: freeswitch/trunk/src/include/switch_types.h freeswitch/trunk/src/switch_channel.c freeswitch/trunk/src/switch_core.c freeswitch/trunk/src/switch_ivr.c Log: tweaks to file buffering Modified: freeswitch/trunk/src/include/switch_types.h ============================================================================== --- freeswitch/trunk/src/include/switch_types.h (original) +++ freeswitch/trunk/src/include/switch_types.h Mon Mar 12 16:17:34 2007 @@ -730,7 +730,8 @@ SWITCH_FILE_DATA_DOUBLE = (1 << 6) - Read data in doubles SWITCH_FILE_DATA_RAW = (1 << 7) - Read data as is SWITCH_FILE_PAUSE = (1 << 8) - Pause -SWITCH_FILE_NATIVE = (1 << 8) - File is in native format (no transcoding) +SWITCH_FILE_NATIVE = (1 << 9) - File is in native format (no transcoding) +SWITCH_FILE_SEEK = (1 << 10) - File has done a seek </pre> */ typedef enum { @@ -743,7 +744,8 @@ SWITCH_FILE_DATA_DOUBLE = (1 << 6), SWITCH_FILE_DATA_RAW = (1 << 7), SWITCH_FILE_PAUSE = (1 << 8), - SWITCH_FILE_NATIVE = (1 << 9) + SWITCH_FILE_NATIVE = (1 << 9), + SWITCH_FILE_SEEK = (1 << 10) } switch_file_flag_t; typedef enum { Modified: freeswitch/trunk/src/switch_channel.c ============================================================================== --- freeswitch/trunk/src/switch_channel.c (original) +++ freeswitch/trunk/src/switch_channel.c Mon Mar 12 16:17:34 2007 @@ -432,7 +432,8 @@ SWITCH_DECLARE(uint8_t) switch_channel_ready(switch_channel_t *channel) { assert(channel != NULL); - return (channel->state > CS_RING && channel->state < CS_HANGUP && !switch_test_flag(channel, CF_TRANSFER)) ? 1 : 0; + + return (!channel->hangup_cause && channel->state > CS_RING && channel->state < CS_HANGUP && !switch_test_flag(channel, CF_TRANSFER)) ? 1 : 0; } static const char *state_names[] = { @@ -1059,7 +1060,7 @@ assert(channel != NULL); - if (channel->state >= CS_HANGUP) { + if (channel->hangup_cause || channel->state >= CS_HANGUP) { return SWITCH_STATUS_FALSE; } @@ -1093,7 +1094,7 @@ assert(channel != NULL); - if (channel->state >= CS_HANGUP) { + if (channel->hangup_cause || channel->state >= CS_HANGUP) { return SWITCH_STATUS_FALSE; } @@ -1127,7 +1128,7 @@ assert(channel != NULL); - if (channel->state >= CS_HANGUP) { + if (channel->hangup_cause || channel->state >= CS_HANGUP) { return SWITCH_STATUS_FALSE; } @@ -1169,7 +1170,7 @@ { assert(channel != NULL); - if (channel->state >= CS_HANGUP) { + if (channel->hangup_cause || channel->state >= CS_HANGUP) { return SWITCH_STATUS_FALSE; } Modified: freeswitch/trunk/src/switch_core.c ============================================================================== --- freeswitch/trunk/src/switch_core.c (original) +++ freeswitch/trunk/src/switch_core.c Mon Mar 12 16:17:34 2007 @@ -1070,6 +1070,8 @@ int whence) { assert(fh != NULL); + + switch_set_flag(fh, SWITCH_FILE_SEEK); return fh->file_interface->file_seek(fh, cur_pos, samples, whence); } Modified: freeswitch/trunk/src/switch_ivr.c ============================================================================== --- freeswitch/trunk/src/switch_ivr.c (original) +++ freeswitch/trunk/src/switch_ivr.c Mon Mar 12 16:17:34 2007 @@ -1377,6 +1377,12 @@ switch_buffer_zero(fh->audio_buffer); } + if (switch_test_flag(fh, SWITCH_FILE_SEEK)) { + /* file position has changed flush the buffer */ + switch_buffer_zero(fh->audio_buffer); + switch_clear_flag(fh, SWITCH_FILE_SEEK); + } + if (!asis && fh->speed && do_speed) { float factor = 0.25f * abs(fh->speed);

1 0

[commit] r4574 - freeswitch/trunk/src/mod/endpoints/mod_portaudio
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: anthm Date: Mon Mar 12 16:16:44 2007 New Revision: 4574 Modified: freeswitch/trunk/src/mod/endpoints/mod_portaudio/mod_portaudio.c Log: change hangup method Modified: freeswitch/trunk/src/mod/endpoints/mod_portaudio/mod_portaudio.c ============================================================================== --- freeswitch/trunk/src/mod/endpoints/mod_portaudio/mod_portaudio.c (original) +++ freeswitch/trunk/src/mod/endpoints/mod_portaudio/mod_portaudio.c Mon Mar 12 16:16:44 2007 @@ -1477,7 +1477,8 @@ } if (tech_pvt) { - switch_set_flag_locked(tech_pvt, TFLAG_HUP); + switch_channel_hangup(switch_core_session_get_channel(tech_pvt->session), SWITCH_CAUSE_NORMAL_CLEARING); + //switch_set_flag_locked(tech_pvt, TFLAG_HUP); stream->write_function(stream, "OK\n"); } else { stream->write_function(stream, "NO SUCH CALL\n");

1 0

[commit] r4573 - freeswitch/trunk/conf
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: brian Date: Mon Mar 12 14:54:06 2007 New Revision: 4573 Added: freeswitch/trunk/conf/mod_cdr.conf.xml Log: add cdr conf example Added: freeswitch/trunk/conf/mod_cdr.conf.xml ============================================================================== --- (empty file) +++ freeswitch/trunk/conf/mod_cdr.conf.xml Mon Mar 12 14:54:06 2007 @@ -0,0 +1,25 @@ +<configuration name="mod_cdr.conf" description="CDR Configuration"> + <pddcdr> + <param name="path" value="/work/temp/pddcdr"/> +  +  + </pddcdr> + <csvcdr> + <param name="path" value="/work/temp/csvcdr"/> + <param name="size_limit" value="25"/> +  +  +  + </csvcdr> + <mysqlcdr> + <param name="hostname" value="10.0.0.1"/> + <param name="username" value="test"/> + <param name="password" value="test"/> + <param name="dbname" value="testing"/> +  +  +  + <param name="chanvars_supp" value="*"/> + <param name="chanvars_supp_repeat_fixed" value="0"/> + </mysqlcdr> +</configuration>

1 0

[commit] r4572 - freeswitch/trunk/build
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: mikej Date: Mon Mar 12 14:40:18 2007 New Revision: 4572 Modified: freeswitch/trunk/build/modmake.rules.in Log: cleanup a bit Modified: freeswitch/trunk/build/modmake.rules.in ============================================================================== --- freeswitch/trunk/build/modmake.rules.in (original) +++ freeswitch/trunk/build/modmake.rules.in Mon Mar 12 14:40:18 2007 @@ -38,7 +38,7 @@ CURDIR=$(shell pwd) CSOURCEFILE=$(CURDIR)/$(MODNAME).c CXXSOURCEFILE=$(CURDIR)/$(MODNAME).cpp -LINK_TYPE=$(shell if test -f $(CSOURCEFILE); then echo "clink"; else echo "cxxlink"; fi;) +#LINK_TYPE=$(shell if test -f $(CSOURCEFILE); then echo "clink"; else echo "cxxlink"; fi;) all: depend $(MODNAME).$(DYNAMIC_LIB_EXTEN) local_all depend: local_depend @@ -47,13 +47,16 @@ distclean: clean local_distclean extraclean: distclean local_extraclean -$(MODNAME).$(DYNAMIC_LIB_EXTEN): $(MODNAME).o $(LOCAL_OBJS) depend $(LINK_TYPE) +$(MODNAME).o: depend -clink: $(MODNAME).o $(LOCAL_OBJS) - $(LINK) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LIBS) $(LOCAL_LDFLAGS) $(LOCAL_OBJS) - -cxxlink: $(MODNAME).o $(LOCAL_OBJS) - $(CXXLINK) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LIBS) $(LOCAL_LDFLAGS) $(LOCAL_OBJS) +$(MODNAME).$(DYNAMIC_LIB_EXTEN): $(MODNAME).o $(LOCAL_OBJS) + @if test -f $(CSOURCEFILE); then \ + echo $(LINK) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LIBS) $(LOCAL_LDFLAGS) $(LOCAL_OBJS); \ + $(LINK) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LIBS) $(LOCAL_LDFLAGS) $(LOCAL_OBJS); \ + else \ + echo $(CXXLINK) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LIBS) $(LOCAL_LDFLAGS) $(LOCAL_OBJS); \ + $(CXXLINK) $(SOLINK) $(MODNAME).o -o $(MODNAME).$(DYNAMIC_LIB_EXTEN) $(LIBS) $(LOCAL_LDFLAGS) $(LOCAL_OBJS); \ + fi; mod_clean: rm -fr *.$(DYNAMIC_LIB_EXTEN) *.o *~ .libs @@ -86,5 +89,4 @@ .PHONY: all depend clean local_all local_depend \ install depend_install local_install mod_install \ clean local_clean mod_clean distclean \ - local_distclean extraclean local_extraclean \ - clink cxxlink + local_distclean extraclean local_extraclean

1 0

[commit] r4571 - freeswitch/trunk
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: mikej Date: Mon Mar 12 13:54:14 2007 New Revision: 4571 Modified: freeswitch/trunk/bootstrap.sh Log: test for at least automake 1.9, as we need at least that Modified: freeswitch/trunk/bootstrap.sh ============================================================================== --- freeswitch/trunk/bootstrap.sh (original) +++ freeswitch/trunk/bootstrap.sh Mon Mar 12 13:54:14 2007 @@ -25,6 +25,24 @@ echo "bootstrap: autoconf version $ac_version (ok)" fi +# automake 1.9 or newer +am_version=`${AUTOMAKE:-automake} --version 2>/dev/null|sed -e 's/^[^0-9]*//;s/[a-z]* *$//;q'` +if test -z "$am_version"; then +echo "bootstrap: automake not found." +echo " You need automake version 1.9 or newer installed" +echo " to build FreeSWITCH from SVN." +exit 1 +fi +IFS=.; set $am_version; IFS=' ' +if test "$1" = "1" -a "$2" -lt "9"; then +echo "bootstrap: automake version $am_version found." +echo " You need automake version 1.9 or newer installed" +echo " to build FreeSWITCH from SVN." +exit 1 +else +echo "bootstrap: automake version $am_version (ok)" +fi + # Sample libtool --version outputs: # ltmain.sh (GNU libtool) 1.3.3 (1.385.2.181 1999/07/02 15:49:11) # ltmain.sh (GNU libtool 1.1361 2004/01/02 23:10:52) 1.5a

1 0

[commit] r4570 - freeswitch/trunk
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: mikej Date: Mon Mar 12 13:53:52 2007 New Revision: 4570 Modified: freeswitch/trunk/configure Log: to go along with the last commit Modified: freeswitch/trunk/configure ============================================================================== --- freeswitch/trunk/configure (original) +++ freeswitch/trunk/configure Mon Mar 12 13:53:52 2007 @@ -20037,7 +20037,7 @@ SOLINK="-Bdynamic -dy -G" elif test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then case "$host" in - *-darwin*) + *darwin*) SOLINK="-dynamic -bundle -force-flat-namespace" ;; *) @@ -20053,7 +20053,7 @@ # set DYNAMIC_LIB_EXTEN # we should really be using libtool so we don't need to do this case "$host" in - *-darwin*) + *darwin*) DYNAMIC_LIB_EXTEN="dylib" ;; *cygwin* | *mingw*) @@ -20218,7 +20218,7 @@ # tweak platform specific flags case "$host" in - *-darwin*) + *darwin*) if test "x$SWITCH_AM_CFLAGS" = "x"; then test "x$silent" != "xyes" && echo " setting SWITCH_AM_CFLAGS to \"-DMACOSX\""

1 0

[commit] r4569 - freeswitch/trunk
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: anthm Date: Mon Mar 12 13:46:24 2007 New Revision: 4569 Modified: freeswitch/trunk/configure.in Log: better Mac detection Modified: freeswitch/trunk/configure.in ============================================================================== --- freeswitch/trunk/configure.in (original) +++ freeswitch/trunk/configure.in Mon Mar 12 13:46:24 2007 @@ -62,7 +62,7 @@ SOLINK="-Bdynamic -dy -G" elif test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then case "$host" in - *-darwin*) + *darwin*) SOLINK="-dynamic -bundle -force-flat-namespace" ;; *) @@ -76,7 +76,7 @@ # set DYNAMIC_LIB_EXTEN # we should really be using libtool so we don't need to do this case "$host" in - *-darwin*) + *darwin*) DYNAMIC_LIB_EXTEN="dylib" ;; *cygwin* | *mingw*) @@ -101,7 +101,7 @@ # tweak platform specific flags case "$host" in - *-darwin*) + *darwin*) APR_ADDTO(SWITCH_AM_CFLAGS, -DMACOSX) APR_REMOVEFROM(SWITCH_AM_CFLAGS, -fPIC) ;;

1 0

[commit] r4568 - freeswitch/trunk
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: mikej Date: Mon Mar 12 13:05:56 2007 New Revision: 4568 Modified: freeswitch/trunk/configure freeswitch/trunk/configure.in Log: remove unneeded -L from our LDFLAGS Modified: freeswitch/trunk/configure ============================================================================== --- freeswitch/trunk/configure (original) +++ freeswitch/trunk/configure Mon Mar 12 13:05:56 2007 @@ -20030,7 +20030,7 @@ # set defaults for use on all platforms SWITCH_AM_CFLAGS="-I${switch_srcdir}/src/include -I${prefix}/include" SWITCH_AM_CXXFLAGS="-I${switch_srcdir}/src/include -I${prefix}/include" -SWITCH_AM_LDFLAGS="-L${prefix}/lib -lm -L/usr/local/lib/db42 -L/usr/local/lib" +SWITCH_AM_LDFLAGS="-L${prefix}/lib -lm -L/usr/local/lib" #set SOLINK variable based on compiler and host if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then Modified: freeswitch/trunk/configure.in ============================================================================== --- freeswitch/trunk/configure.in (original) +++ freeswitch/trunk/configure.in Mon Mar 12 13:05:56 2007 @@ -55,7 +55,7 @@ # set defaults for use on all platforms SWITCH_AM_CFLAGS="-I${switch_srcdir}/src/include -I${prefix}/include" SWITCH_AM_CXXFLAGS="-I${switch_srcdir}/src/include -I${prefix}/include" -SWITCH_AM_LDFLAGS="-L${prefix}/lib -lm -L/usr/local/lib/db42 -L/usr/local/lib" +SWITCH_AM_LDFLAGS="-L${prefix}/lib -lm -L/usr/local/lib" #set SOLINK variable based on compiler and host if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then

1 0

[commit] r4567 - in freeswitch/trunk/libs/iksemel: . build doc include src test tools
by Freeswitch SVN 12 Mar '07

12 Mar '07

Author: mikej Date: Mon Mar 12 11:59:06 2007 New Revision: 4567 Added: freeswitch/trunk/libs/iksemel/build/compile (contents, props changed) freeswitch/trunk/libs/iksemel/build/config.guess (contents, props changed) freeswitch/trunk/libs/iksemel/build/config.sub (contents, props changed) freeswitch/trunk/libs/iksemel/build/depcomp (contents, props changed) freeswitch/trunk/libs/iksemel/build/install-sh (contents, props changed) freeswitch/trunk/libs/iksemel/build/ltmain.sh freeswitch/trunk/libs/iksemel/build/missing (contents, props changed) Removed: freeswitch/trunk/libs/iksemel/compile freeswitch/trunk/libs/iksemel/config.guess freeswitch/trunk/libs/iksemel/config.sub freeswitch/trunk/libs/iksemel/depcomp freeswitch/trunk/libs/iksemel/doc/texinfo.tex freeswitch/trunk/libs/iksemel/install-sh freeswitch/trunk/libs/iksemel/missing freeswitch/trunk/libs/iksemel/mkinstalldirs Modified: freeswitch/trunk/libs/iksemel/Makefile.in freeswitch/trunk/libs/iksemel/build/ (props changed) freeswitch/trunk/libs/iksemel/configure freeswitch/trunk/libs/iksemel/configure.ac freeswitch/trunk/libs/iksemel/doc/Makefile.in freeswitch/trunk/libs/iksemel/include/ (props changed) freeswitch/trunk/libs/iksemel/include/Makefile.in freeswitch/trunk/libs/iksemel/src/ (props changed) freeswitch/trunk/libs/iksemel/src/Makefile.in freeswitch/trunk/libs/iksemel/test/ (props changed) freeswitch/trunk/libs/iksemel/test/Makefile.in freeswitch/trunk/libs/iksemel/tools/ (props changed) freeswitch/trunk/libs/iksemel/tools/Makefile.in Log: upate the configure generated files, fix svn ignore props Modified: freeswitch/trunk/libs/iksemel/Makefile.in ============================================================================== --- freeswitch/trunk/libs/iksemel/Makefile.in (original) +++ freeswitch/trunk/libs/iksemel/Makefile.in Mon Mar 12 11:59:06 2007 @@ -39,8 +39,9 @@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/iksemel.pc.in \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - TODO compile config.guess config.sub depcomp install-sh \ - ltmain.sh missing mkinstalldirs + TODO build/compile build/config.guess build/config.sub \ + build/depcomp build/install-sh build/ltmain.sh build/missing \ + build/texinfo.tex ltmain.sh subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/build/libgnutls.m4 \ @@ -49,7 +50,7 @@ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_CLEAN_FILES = iksemel.pc SOURCES = Added: freeswitch/trunk/libs/iksemel/build/compile ============================================================================== --- (empty file) +++ freeswitch/trunk/libs/iksemel/build/compile Mon Mar 12 11:59:06 2007 @@ -0,0 +1,140 @@ +#! /bin/sh +# Wrapper for compilers which do not understand `-c -o'. + +scriptversion=2004-09-10.20 + +# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc. +# Written by Tom Tromey <tromey(a)cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake(a)gnu.org> or send patches to +# <automake-patches(a)gnu.org>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to <bug-automake(a)gnu.org>. +EOF + exit 0 + ;; + -v | --v*) + echo "compile $scriptversion" + exit 0 + ;; +esac + +ofile= +cfile= +eat= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we strip `-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + mv "$cofile" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: Added: freeswitch/trunk/libs/iksemel/build/config.guess ============================================================================== --- (empty file) +++ freeswitch/trunk/libs/iksemel/build/config.guess Mon Mar 12 11:59:06 2007 @@ -0,0 +1,1447 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. + +timestamp='2004-09-07' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Per Bothner <per(a)bothner.com>. +# Please send patches to <config-patches(a)gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches(a)gnu.org>." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi(a)noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + amd64:OpenBSD:*:*) + echo x86_64-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + cats:OpenBSD:*:*) + echo arm-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + luna88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mips64-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit 0 ;; + macppc:MirBSD:*:*) + echo powerppc-unknown-mirbsd${UNAME_RELEASE} + exit 0 ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha $.*$ processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee(a)wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7 && exit 0 ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/$[0-9]*$.*/\1/p'` \ + && exit 0 + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*$[A-Z]90$/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + x86:Interix*:[34]*) + echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' + exit 0 ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit 0 ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit 0 ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit 0 ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit 0 ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel(a)ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <hewes(a)openmarket.com>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf(a)swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From Paul.Green(a)stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + *86) UNAME_PROCESSOR=i686 ;; + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit 0 ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit 0 ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms && exit 0 ;; + I*) echo ia64-dec-vms && exit 0 ;; + V*) echo vax-dec-vms && exit 0 ;; + esac +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach $[0-9]*$.*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include <sys/param.h> +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 <<EOF +$0: unable to guess system type + +This script, last modified $timestamp, has failed to recognize +the operating system you are using. It is advised that you +download the most up to date version of the config scripts from + + ftp://ftp.gnu.org/pub/gnu/config/ + +If the version you run ($0) is already up to date, please +send the following data and any information you think might be +pertinent to <config-patches(a)gnu.org> in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: Added: freeswitch/trunk/libs/iksemel/build/config.sub ============================================================================== --- (empty file) +++ freeswitch/trunk/libs/iksemel/build/config.sub Mon Mar 12 11:59:06 2007 @@ -0,0 +1,1555 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. + +timestamp='2004-08-29' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, +# Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Please send patches to <config-patches(a)gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches(a)gnu.org>." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ + kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32r | m32rle | m68000 | m68k | m88k | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | msp430 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | msp430-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: Added: freeswitch/trunk/libs/iksemel/build/depcomp ============================================================================== --- (empty file) +++ freeswitch/trunk/libs/iksemel/build/depcomp Mon Mar 12 11:59:06 2007 @@ -0,0 +1,522 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2004-05-31.23 + +# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva <oliva(a)dcc.unicamp.br>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to <bug-automake(a)gnu.org>. +EOF + exit 0 + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit 0 + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.$[^.]*$$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.$[^.]*$$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/$.*$\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: $.*$$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: $.*$$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # Dependencies are output in .lo.d with libtool 1.4. + # With libtool 1.5 they are output both in $dir.libs/$base.o.d + # and in $dir.libs/$base.o.d and $dir$base.o.d. We process the + # latter, because the former will be cleaned when $dir.libs is + # erased. + tmpdepfile1="$dir.libs/$base.lo.d" + tmpdepfile2="$dir$base.o.d" + tmpdepfile3="$dir.libs/$base.d" + "$@" -Wc,-MD + else + tmpdepfile1="$dir$base.o.d" + tmpdepfile2="$dir$base.d" + tmpdepfile3="$dir$base.d" + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + if test -f "$tmpdepfile1"; then + tmpdepfile="$tmpdepfile1" + elif test -f "$tmpdepfile2"; then + tmpdepfile="$tmpdepfile2" + else + tmpdepfile="$tmpdepfile3" + fi + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n '/^# [0-9][0-9]* "$[^"]*$".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "$[^"]*$"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^$.*$$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^$.*$$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: Added: freeswitch/trunk/libs/iksemel/build/install-sh ============================================================================== --- (empty file) +++ freeswitch/trunk/libs/iksemel/build/install-sh Mon Mar 12 11:59:06 2007 @@ -0,0 +1,322 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2004-09-10.20 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +chmodcmd="$chmodprog 0755" +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit 0;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit 0;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit; } +done + +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: Added: freeswitch/trunk/libs/iksemel/build/ltmain.sh ============================================================================== --- (empty file) +++ freeswitch/trunk/libs/iksemel/build/ltmain.sh Mon Mar 12 11:59:06 2007 @@ -0,0 +1,6863 @@ +# ltmain.sh - Provide generalized library-building support services. +# NOTE: Changing this file will not affect anything until you rerun configure. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit <gord(a)gnu.ai.mit.edu>, 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +basename="s,^.*/,,g" + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + +# The name of this program: +progname=`echo "$progpath" | $SED $basename` +modename="$progname" + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 + +PROGRAM=ltmain.sh +PACKAGE=libtool +VERSION=1.5.22 +TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes. +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +# Check that we have a working $echo. +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell, and then maybe $echo will work. + exec $SHELL "$progpath" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +$* +EOF + exit $EXIT_SUCCESS +fi + +default_mode= +help="Try \`$progname --help' for more information." +magic="%%%MAGIC variable%%%" +mkdir="mkdir" +mv="mv -f" +rm="rm -f" + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/$[\\`\\"$\\\\]$/\\\1/g' +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + SP2NL='tr \040 \012' + NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + SP2NL='tr \100 \n' + NL2SP='tr \r\n \100\100' + ;; +esac + +# NLS nuisances. +# Only set LANG and LC_ALL to C if already set. +# These must not be set unconditionally because not all systems understand +# e.g. LANG=C (notably SCO). +# We save the old values to restore during execute mode. +if test "${LC_ALL+set}" = set; then + save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL +fi +if test "${LANG+set}" = set; then + save_LANG="$LANG"; LANG=C; export LANG +fi + +# Make sure IFS has a sensible default +lt_nl=' +' +IFS=" $lt_nl" + +if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + $echo "$modename: not configured to build any kind of library" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE +fi + +# Global variables. +mode=$default_mode +nonopt= +prev= +prevopt= +run= +show="$echo" +show_help= +execute_dlfiles= +duplicate_deps=no +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" + +##################################### +# Shell function definitions: +# This seems to be the best place for them + +# func_mktempdir [string] +# Make a temporary directory that won't clash with other running +# libtool processes, and avoids race conditions if possible. If +# given, STRING is the basename for that directory. +func_mktempdir () +{ + my_template="${TMPDIR-/tmp}/${1-$progname}" + + if test "$run" = ":"; then + # Return a directory name, but don't create it in dry-run mode + my_tmpdir="${my_template}-$$" + else + + # If mktemp works, use that first and foremost + my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` + + if test ! -d "$my_tmpdir"; then + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" + + save_mktempdir_umask=`umask` + umask 0077 + $mkdir "$my_tmpdir" + umask $save_mktempdir_umask + fi + + # If we're not in dry-run mode, bomb out on failure + test -d "$my_tmpdir" || { + $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 + exit $EXIT_FAILURE + } + fi + + $echo "X$my_tmpdir" | $Xsed +} + + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +func_win32_libid () +{ + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" + ;; + *ar\ archive*) # could be an import, or static + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ + $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then + win32_nmres=`eval $NM -f posix -A $1 | \ + $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $echo $win32_libid_type +} + + +# func_infer_tag arg +# Infer tagged configuration to use if any are available and +# if one wasn't chosen via the "--tag" command line option. +# Only attempt this if the compiler in the base compile +# command doesn't match the default compiler. +# arg is usually of the form 'gcc ...' +func_infer_tag () +{ + if test -n "$available_tags" && test -z "$tagname"; then + CC_quoted= + for arg in $CC; do + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case $@ in + # Blanks in the command may have been stripped by the calling shell, + # but not from the CC environment variable when configure was run. + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + # Blanks at the start of $base_compile will cause this to fail + # if we don't check for them as well. + *) + for z in $available_tags; do + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" + CC_quoted= + for arg in $CC; do + # Double-quote args containing other shell metacharacters. + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + CC_quoted="$CC_quoted $arg" + done + case "$@ " in + " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + # The compiler in the base compile command matches + # the one in the tagged configuration. + # Assume this is the tagged configuration we want. + tagname=$z + break + ;; + esac + fi + done + # If $tagname still isn't set, then no tagged configuration + # was found and let the user know that the "--tag" command + # line option must be used. + if test -z "$tagname"; then + $echo "$modename: unable to infer tagged configuration" + $echo "$modename: specify a tag with \`--tag'" 1>&2 + exit $EXIT_FAILURE +# else +# $echo "$modename: using $tagname tagged configuration" + fi + ;; + esac + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + + $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" + $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 + exit $EXIT_FAILURE + fi +} + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + my_status="" + + $show "${rm}r $my_gentop" + $run ${rm}r "$my_gentop" + $show "$mkdir $my_gentop" + $run $mkdir "$my_gentop" + my_status=$? + if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then + exit $my_status + fi + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` + my_xdir="$my_gentop/$my_xlib" + + $show "${rm}r $my_xdir" + $run ${rm}r "$my_xdir" + $show "$mkdir $my_xdir" + $run $mkdir "$my_xdir" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then + exit $exit_status + fi + case $host in + *-darwin*) + $show "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + if test -z "$run"; then + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` + darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` + if test -n "$darwin_arches"; then + darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + $show "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we have a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` + lipo -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + ${rm}r unfat-$$ + cd "$darwin_orig_dir" + else + cd "$darwin_orig_dir" + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + fi # $run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + done + func_extract_archives_result="$my_oldobjs" +} +# End of Shell function definitions +##################################### + +# Darwin sucks +eval std_shrext=\"$shrext_cmds\" + +disable_libs=no + +# Parse our command line options once, thoroughly. +while test "$#" -gt 0 +do + arg="$1" + shift + + case $arg in + -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; + *) optarg= ;; + esac + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; + tag) + tagname="$arg" + preserve_args="${preserve_args}=$arg" + + # Check whether tagname contains only valid characters + case $tagname in + *[!-_A-Za-z0-9,/]*) + $echo "$progname: invalid tag name: $tagname" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $tagname in + CC) + # Don't test for the "default" C tag, as we know, it's there, but + # not specially marked. + ;; + *) + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then + taglist="$taglist $tagname" + # Evaluate the configuration. + eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" + else + $echo "$progname: ignoring unknown tag $tagname" 1>&2 + fi + ;; + esac + ;; + *) + eval "$prev=\$arg" + ;; + esac + + prev= + prevopt= + continue + fi + + # Have we seen a non-optional argument yet? + case $arg in + --help) + show_help=yes + ;; + + --version) + $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" + $echo + $echo "Copyright (C) 2005 Free Software Foundation, Inc." + $echo "This is free software; see the source for copying conditions. There is NO" + $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + exit $? + ;; + + --config) + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath + # Now print the configurations for the tags. + for tagname in $taglist; do + ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" + done + exit $? + ;; + + --debug) + $echo "$progname: enabling shell trace mode" + set -x + preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) + run=: + ;; + + --features) + $echo "host: $host" + if test "$build_libtool_libs" = yes; then + $echo "enable shared libraries" + else + $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + $echo "enable static libraries" + else + $echo "disable static libraries" + fi + exit $? + ;; + + --finish) mode="finish" ;; + + --mode) prevopt="--mode" prev=mode ;; + --mode=*) mode="$optarg" ;; + + --preserve-dup-deps) duplicate_deps="yes" ;; + + --quiet | --silent) + show=: + preserve_args="$preserve_args $arg" + ;; + + --tag) + prevopt="--tag" + prev=tag + preserve_args="$preserve_args --tag" + ;; + --tag=*) + set tag "$optarg" ${1+"$@"} + shift + prev=tag + preserve_args="$preserve_args --tag" + ;; + + -dlopen) + prevopt="-dlopen" + prev=execute_dlfiles + ;; + + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + + *) + nonopt="$arg" + break + ;; + esac +done + +if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE +fi + +case $disable_libs in +no) + ;; +shared) + build_libtool_libs=no + build_old_libs=yes + ;; +static) + build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` + ;; +esac + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +if test -z "$show_help"; then + + # Infer the operation mode. + if test -z "$mode"; then + $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 + $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in + *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do + case $arg in + -c) + mode=compile + break + ;; + esac + done + ;; + *db | *dbx | *strace | *truss) + mode=execute + ;; + *install*|cp|mv) + mode=install + ;; + *rm) + mode=uninstall + ;; + *) + # If we have no mode, but dlfiles were specified, then do execute mode. + test -n "$execute_dlfiles" && mode=execute + + # Just use the default operation mode. + if test -z "$mode"; then + if test -n "$nonopt"; then + $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 + else + $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 + fi + fi + ;; + esac + fi + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$modename --help --mode=$mode' for more information." + + # These modes are in order of execution frequency so that they run quickly. + case $mode in + # libtool compile mode + compile) + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= + srcfile="$nonopt" # always keep a non-empty value in "srcfile" + suppress_opt=yes + suppress_output= + arg_mode=normal + libobj= + later= + + for arg + do + case $arg_mode in + arg ) + # do not "continue". Instead, add this to base_compile + lastarg="$arg" + arg_mode=normal + ;; + + target ) + libobj="$arg" + arg_mode=normal + continue + ;; + + normal ) + # Accept any command-line options. + case $arg in + -o) + if test -n "$libobj" ; then + $echo "$modename: you cannot specify \`-o' more than once" 1>&2 + exit $EXIT_FAILURE + fi + arg_mode=target + continue + ;; + + -static | -prefer-pic | -prefer-non-pic) + later="$later $arg" + continue + ;; + + -no-suppress) + suppress_opt=no + continue + ;; + + -Xcompiler) + arg_mode=arg # the next one goes into the "base_compile" arg list + continue # The current "srcfile" will either be retained or + ;; # replaced later. I would guess that would be a bug. + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" + continue + ;; + + * ) + # Accept the current argument as the source file. + # The previous "srcfile" becomes the current argument. + # + lastarg="$srcfile" + srcfile="$arg" + ;; + esac # case $arg + ;; + esac # case $arg_mode + + # Aesthetically quote the previous argument. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + + case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, and some SunOS ksh mistreat backslash-escaping + # in scan sets (worked around with variable expansion), + # and furthermore cannot handle '|' '&' '(' ')' in scan sets + # at all, so we specify them separately. + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + + base_compile="$base_compile $lastarg" + done # for arg + + case $arg_mode in + arg) + $echo "$modename: you must specify an argument for -Xcompile" + exit $EXIT_FAILURE + ;; + target) + $echo "$modename: you must specify a target with \`-o'" 1>&2 + exit $EXIT_FAILURE + ;; + *) + # Get the name of the library object. + [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo + xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; + *.ads) xform=ads ;; + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; + *.ii) xform=ii ;; + *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; + *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` + + case $libobj in + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + func_infer_tag $base_compile + + for arg in $later; do + case $arg in + -static) + build_old_libs=yes + continue + ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + esac + done + + qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` + case $qlibobj in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qlibobj="\"$qlibobj\"" ;; + esac + test "X$libobj" != "X$qlibobj" \ + && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." + objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir= + else + xdir=$xdir/ + fi + lobj=${xdir}$objdir/$objname + + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then + removelist="$obj $lobj $libobj ${libobj}T" + else + removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + + # Calculate the filename of the output object if compiler does + # not support -o with -c + if test "$compiler_c_o" = no; then + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" + trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else + output_obj= + need_locks=no + lockfile= + fi + + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then + until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then + $echo "\ +*** ERROR, $lockfile exists and contains: +`cat $lockfile 2>/dev/null` + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + $echo "$srcfile" > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi + qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` + case $qsrcfile in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qsrcfile="\"$qsrcfile\"" ;; + esac + + $run $rm "$libobj" "${libobj}T" + + # Create a libtool object file (analogous to a ".la" file), + # but don't create it if we're doing a dry run. + test -z "$run" && cat > ${libobj}T <<EOF +# $libobj - a libtool object file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# Name of the PIC object. +EOF + + # Only build a PIC object if we are building libtool libraries. + if test "$build_libtool_libs" = yes; then + # Without this assignment, base_compile gets emptied. + fbsd_hideous_sh_bug=$base_compile + + if test "$pic_mode" != no; then + command="$base_compile $qsrcfile $pic_flag" + else + # Don't build PIC code + command="$base_compile $qsrcfile" + fi + + if test ! -d "${xdir}$objdir"; then + $show "$mkdir ${xdir}$objdir" + $run $mkdir ${xdir}$objdir + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then + exit $exit_status + fi + fi + + if test -z "$output_obj"; then + # Place PIC objects in $objdir + command="$command -o $lobj" + fi + + $run $rm "$lobj" "$output_obj" + + $show "$command" + if $run eval "$command"; then : + else + test -n "$output_obj" && $run $rm $removelist + exit $EXIT_FAILURE + fi + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one + if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then + $show "$mv $output_obj $lobj" + if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the PIC object to the libtool object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object='$objdir/$objname' + +EOF + + # Allow error messages only from the first compilation. + if test "$suppress_opt" = yes; then + suppress_output=' >/dev/null 2>&1' + fi + else + # No PIC object so indicate it doesn't exist in the libtool + # object file. + test -z "$run" && cat >> ${libobj}T <<EOF +pic_object=none + +EOF + fi + + # Only build a position-dependent object if we build old libraries. + if test "$build_old_libs" = yes; then + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $qsrcfile" + else + command="$base_compile $qsrcfile $pic_flag" + fi + if test "$compiler_c_o" = yes; then + command="$command -o $obj" + fi + + # Suppress compiler output if we already did a PIC compilation. + command="$command$suppress_output" + $run $rm "$obj" "$output_obj" + $show "$command" + if $run eval "$command"; then : + else + $run $rm $removelist + exit $EXIT_FAILURE + fi + + if test "$need_locks" = warn && + test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then + $echo "\ +*** ERROR, $lockfile contains: +`cat $lockfile 2>/dev/null` + +but it should contain: +$srcfile + +This indicates that another process is trying to use the same +temporary object file, and libtool could not work around it because +your compiler does not support \`-c' and \`-o' together. If you +repeat this compilation, it may succeed, by chance, but you had better +avoid parallel builds (make -j) in this platform, or get a better +compiler." + + $run $rm $removelist + exit $EXIT_FAILURE + fi + + # Just move the object if needed + if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi + + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object='$objname' + +EOF + else + # Append the name of the non-PIC object the libtool object file. + # Only append if the libtool object file exists. + test -z "$run" && cat >> ${libobj}T <<EOF +# Name of the non-PIC object. +non_pic_object=none + +EOF + fi + + $run $mv "${libobj}T" "${libobj}" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" + fi + + exit $EXIT_SUCCESS + ;; + + # libtool link mode + link | relink) + modename="$modename: link" + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # It is impossible to link a dll without this setting, and + # we shouldn't force the makefile maintainer to figure out + # which system we are compiling for in order to pass an extra + # flag for every libtool invocation. + # allow_undefined=no + + # FIXME: Unfortunately, there are problems with the above when trying + # to make a dll which has undefined symbols, in which case not + # even a static library is built. For now, we need to specify + # -no-undefined on the libtool link line when we can be certain + # that all symbols are satisfied, otherwise we get a static library. + allow_undefined=yes + ;; + *) + allow_undefined=yes + ;; + esac + libtool_args="$nonopt" + base_compile="$nonopt $@" + compile_command="$nonopt" + finalize_command="$nonopt" + + compile_rpath= + finalize_rpath= + compile_shlibpath= + finalize_shlibpath= + convenience= + old_convenience= + deplibs= + old_deplibs= + compiler_flags= + linker_flags= + dllsearchpath= + lib_search_path=`pwd` + inst_prefix_dir= + + avoid_version=no + dlfiles= + dlprefiles= + dlself=no + export_dynamic=no + export_symbols= + export_symbols_regex= + generated= + libobjs= + ltlibs= + module=no + no_install=no + objs= + non_pic_objects= + notinst_path= # paths that contain not-installed libtool libraries + precious_files_regex= + prefer_static_libs=no + preload=no + prev= + prevarg= + release= + rpath= + xrpath= + perm_rpath= + temp_rpath= + thread_safe=no + vinfo= + vinfo_number=no + + func_infer_tag $base_compile + + # We need to know -static, to get the right output filenames. + for arg + do + case $arg in + -all-static | -static) + if test "X$arg" = "X-all-static"; then + if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then + $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + fi + if test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=yes + else + if test -z "$pic_flag" && test -n "$link_static_flag"; then + dlopen_self=$dlopen_self_static + fi + prefer_static_libs=built + fi + build_libtool_libs=no + build_old_libs=yes + break + ;; + esac + done + + # See if our shared archives depend on static archives. + test -n "$old_archive_from_new_cmds" && build_old_libs=yes + + # Go through the arguments, transforming them on the way. + while test "$#" -gt 0; do + arg="$1" + shift + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" + + # If the previous option needs an argument, assign it. + if test -n "$prev"; then + case $prev in + output) + compile_command="$compile_command @OUTPUT@" + finalize_command="$finalize_command @OUTPUT@" + ;; + esac + + case $prev in + dlfiles|dlprefiles) + if test "$preload" = no; then + # Add the symbol object into the linking commands. + compile_command="$compile_command @SYMFILE@" + finalize_command="$finalize_command @SYMFILE@" + preload=yes + fi + case $arg in + *.la | *.lo) ;; # We handle these cases below. + force) + if test "$dlself" = no; then + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + self) + if test "$prev" = dlprefiles; then + dlself=yes + elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then + dlself=yes + else + dlself=needless + export_dynamic=yes + fi + prev= + continue + ;; + *) + if test "$prev" = dlfiles; then + dlfiles="$dlfiles $arg" + else + dlprefiles="$dlprefiles $arg" + fi + prev= + continue + ;; + esac + ;; + expsyms) + export_symbols="$arg" + if test ! -f "$arg"; then + $echo "$modename: symbol file \`$arg' does not exist" + exit $EXIT_FAILURE + fi + prev= + continue + ;; + expsyms_regex) + export_symbols_regex="$arg" + prev= + continue + ;; + inst_prefix) + inst_prefix_dir="$arg" + prev= + continue + ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; + objectlist) + if test -f "$arg"; then + save_arg=$arg + moreargs= + for fil in `cat $save_arg` + do +# moreargs="$moreargs $fil" + arg=$fil + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + done + else + $echo "$modename: link input file \`$save_arg' does not exist" + exit $EXIT_FAILURE + fi + arg=$save_arg + prev= + continue + ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + if test "$prev" = rpath; then + case "$rpath " in + *" $arg "*) ;; + *) rpath="$rpath $arg" ;; + esac + else + case "$xrpath " in + *" $arg "*) ;; + *) xrpath="$xrpath $arg" ;; + esac + fi + prev= + continue + ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; + xcclinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + shrext) + shrext_cmds="$arg" + prev= + continue + ;; + darwin_framework|darwin_framework_skip) + test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + prev= + continue + ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac + fi # test -n "$prev" + + prevarg="$arg" + + case $arg in + -all-static) + if test -n "$link_static_flag"; then + compile_command="$compile_command $link_static_flag" + finalize_command="$finalize_command $link_static_flag" + fi + continue + ;; + + -allow-undefined) + # FIXME: remove this flag sometime in the future. + $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 + continue + ;; + + -avoid-version) + avoid_version=yes + continue + ;; + + -dlopen) + prev=dlfiles + continue + ;; + + -dlpreopen) + prev=dlprefiles + continue + ;; + + -export-dynamic) + export_dynamic=yes + continue + ;; + + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" + exit $EXIT_FAILURE + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms + else + prev=expsyms_regex + fi + continue + ;; + + -framework|-arch|-isysroot) + case " $CC " in + *" ${arg} ${1} "* | *" ${arg} ${1} "*) + prev=darwin_framework_skip ;; + *) compiler_flags="$compiler_flags $arg" + prev=darwin_framework ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -inst-prefix-dir) + prev=inst_prefix + continue + ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + + -L*) + dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + notinst_path="$notinst_path $dir" + fi + dir="$absdir" + ;; + esac + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + continue + ;; + + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; + *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C and math libraries are in the System framework + deplibs="$deplibs -framework System" + continue + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + test "X$arg" = "X-lc" && continue + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + test "X$arg" = "X-lc" && continue + ;; + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc_r directly, use -pthread flag. + continue + ;; + esac + fi + deplibs="$deplibs $arg" + continue + ;; + + # Tru64 UNIX uses -model [arg] to determine the layout of C++ + # classes, name mangling, and exception handling. + -model) + compile_command="$compile_command $arg" + compiler_flags="$compiler_flags $arg" + finalize_command="$finalize_command $arg" + prev=xcompiler + continue + ;; + + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + compiler_flags="$compiler_flags $arg" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + continue + ;; + + -module) + module=yes + continue + ;; + + # -64, -mips[0-9] enable 64-bit mode on the SGI compiler + # -r[0-9][0-9]* specifies the processor on the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler + # +DA*, +DD* enable 64-bit mode on the HP compiler + # -q* pass through compiler args for the IBM compiler + # -m* pass through architecture-specific compiler args for GCC + # -m*, -t[45]*, -txscale* pass through architecture-specific + # compiler args for GCC + # -pg pass through profiling flag for GCC + # @file GCC response files + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ + -t[45]*|-txscale*|@*) + + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + compiler_flags="$compiler_flags $arg" + continue + ;; + + -shrext) + prev=shrext + continue + ;; + + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + + -no-undefined) + allow_undefined=no + continue + ;; + + -objectlist) + prev=objectlist + continue + ;; + + -o) prev=output ;; + + -precious-files-regex) + prev=precious_regex + continue + ;; + + -release) + prev=release + continue + ;; + + -rpath) + prev=rpath + continue + ;; + + -R) + prev=xrpath + continue + ;; + + -R*) + dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 + exit $EXIT_FAILURE + ;; + esac + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + continue + ;; + + -static) + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. + continue + ;; + + -thread-safe) + thread_safe=yes + continue + ;; + + -version-info) + prev=vinfo + continue + ;; + -version-number) + prev=vinfo + vinfo_number=yes + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + + -XCClinker) + prev=xcclinker + continue + ;; + + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + + *.$objext) + # A standard object. + objs="$objs $arg" + ;; + + *.lo) + # A libtool-controlled object. + + # Check to see that this really is a libtool object. + if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + pic_object= + non_pic_object= + + # Read the .lo file + # If there is no directory component, then add one. + case $arg in + */* | *\\*) . $arg ;; + *) . ./$arg ;; + esac + + if test -z "$pic_object" || \ + test -z "$non_pic_object" || + test "$pic_object" = none && \ + test "$non_pic_object" = none; then + $echo "$modename: cannot find name of object for \`$arg'" 1>&2 + exit $EXIT_FAILURE + fi + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + if test "$pic_object" != none; then + # Prepend the subdirectory the object is found in. + pic_object="$xdir$pic_object" + + if test "$prev" = dlfiles; then + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $pic_object" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles + fi + fi + + # CHECK ME: I think I busted this. -Ossama + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles $pic_object" + prev= + fi + + # A PIC object. + libobjs="$libobjs $pic_object" + arg="$pic_object" + fi + + # Non-PIC object. + if test "$non_pic_object" != none; then + # Prepend the subdirectory the object is found in. + non_pic_object="$xdir$non_pic_object" + + # A standard non-PIC object + non_pic_objects="$non_pic_objects $non_pic_object" + if test -z "$pic_object" || test "$pic_object" = none ; then + arg="$non_pic_object" + fi + else + # If the PIC object exists, use it instead. + # $xdir was prepended to $pic_object above. + non_pic_object="$pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + else + # Only an error if not doing a dry-run. + if test -z "$run"; then + $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 + exit $EXIT_FAILURE + else + # Dry-run case. + + # Extract subdirectory from the argument. + xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$arg"; then + xdir= + else + xdir="$xdir/" + fi + + pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` + non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` + libobjs="$libobjs $pic_object" + non_pic_objects="$non_pic_objects $non_pic_object" + fi + fi + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue + ;; + + *.la) + # A libtool-controlled library. + + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then + exit $exit_status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + case $host in + *cygwin* | *mingw* | *pw32*) + # don't eliminate duplications in $postdeps and $predeps + duplicate_compiler_generated_deps=yes + ;; + *) + duplicate_compiler_generated_deps=$duplicate_deps + ;; + esac + specialdeplibs= + + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + libs="$libs $deplib" + done + + if test "$linkmode" = lib; then + libs="$predeps $libs $compiler_lib_search_path $postdeps" + + # Compute libraries that are listed more than once in $predeps + # $postdeps and mark them as special (i.e., whose duplicates are + # not to be eliminated). + pre_post_deps= + if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + for pre_post_dep in $predeps $postdeps; do + case "$pre_post_deps " in + *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + esac + pre_post_deps="$pre_post_deps $pre_post_dep" + done + fi + pre_post_deps= + fi + + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan"; then + libs="$deplibs" + deplibs= + fi + if test "$linkmode" = prog; then + case $pass in + dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + if test "$pass" = dlopen; then + # Collect dlpreopened libraries + save_deplibs="$deplibs" + deplibs= + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + compiler_flags="$compiler_flags $deplib" + fi + continue + ;; + -l*) + if test "$linkmode" != lib && test "$linkmode" != prog; then + $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + for search_ext in .la $std_shrext .so .a; do + # Search the libtool library + lib="$searchdir/lib${name}${search_ext}" + if test -f "$lib"; then + if test "$search_ext" = ".la"; then + found=yes + else + found=no + fi + break 2 + fi + done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + else # deplib is a libtool library + # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, + # We need to do some special things here, and not later. + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $deplib "*) + if (${SED} -e '2q' $lib | + grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + library_names= + old_library= + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + for l in $old_library $library_names; do + ll="$l" + done + if test "X$ll" = "X$old_library" ; then # only static version available + found=no + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + lib=$ladir/$old_library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + fi + ;; + *) ;; + esac + fi + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test "$pass" = scan; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 $.*$"` + if eval $echo \"$deplib\" 2>/dev/null \ + | $SED 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + valid_a_lib=yes + fi + ;; + pass_all) + valid_a_lib=yes + ;; + esac + if test "$valid_a_lib" != yes; then + $echo + $echo "*** Warning: Trying to link with static lib archive $deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because the file extensions .$libext of this argument makes me believe" + $echo "*** that it is just a static archive that I should not used here." + else + $echo + $echo "*** Warning: Linking the shared library $output against the" + $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test "$pass" = conv; then + deplibs="$deplib $deplibs" + elif test "$linkmode" = prog; then + if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 + exit $EXIT_FAILURE + fi + + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= + # If the library was installed with an old release of libtool, + # it will not redefine variables installed, or shouldnotlink + installed=yes + shouldnotlink=no + avoidtemprpath= + + + # Read the .la file + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit $EXIT_FAILURE + fi + continue + fi # $pass = conv + + + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do + linklib="$l" + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + + # This library was specified with -dlopen. + if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + if test -z "$dlname" || + test "$dlopen_support" != yes || + test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. We also need to preload any + # dependent libraries so libltdl's deplib preloader doesn't + # bomb out in the load deplibs phase. + dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi + continue + fi # $pass = dlopen + + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" + fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else + if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then + dir="$ladir" + absdir="$abs_ladir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit $EXIT_FAILURE + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" + else + newdlprefiles="$newdlprefiles $dir/$linklib" + fi + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + + + if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes + fi + + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" + fi + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... + + if test "$linkmode,$pass" = "prog,link"; then + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # We need to hardcode the library path + if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $absdir" ;; + esac + fi + + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + fi + + link_static=no # Whether the deplib will be linked statically + use_static_libs=$prefer_static_libs + if test "$use_static_libs" = built && test "$installed" = yes ; then + use_static_libs=no + fi + if test -n "$library_names" && + { test "$use_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + # This is a shared library + + # Warn about portability, can't link against -module's on + # some systems (darwin) + if test "$shouldnotlink" = yes && test "$pass" = link ; then + $echo + if test "$linkmode" = prog; then + $echo "*** Warning: Linking the executable $output against the loadable module" + else + $echo "*** Warning: Linking the shared library $output against the loadable module" + fi + $echo "*** $linklib is not portable!" + fi + if test "$linkmode" = lib && + test "$hardcode_into_libs" = yes; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in + *" $libdir "*) ;; + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; + esac + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; + esac + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`$echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' + cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n "$old_archive_from_expsyms_cmds" + + if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + case $host in + *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; + *-*-sysv4*uw2*) add_dir="-L$dir" ;; + *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ + *-*-unixware7*) add_dir="-L$dir" ;; + *-*-darwin* ) + # if the lib is a module then we can not link against + # it, someone is ignoring the new warnings I added + if /usr/bin/file -L $add 2> /dev/null | + $EGREP ": [^:]* bundle" >/dev/null ; then + $echo "** Warning, lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + $echo + $echo "** And there doesn't seem to be a static archive available" + $echo "** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + fi + esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit $EXIT_FAILURE + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi + if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi + fi + fi + + if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. + if test "$hardcode_direct" = yes; then + add="$libdir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$libdir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" + elif test "$hardcode_automatic" = yes; then + if test -n "$inst_prefix_dir" && + test -f "$inst_prefix_dir$libdir/$linklib" ; then + add="$inst_prefix_dir$libdir/$linklib" + else + add="$libdir/$linklib" + fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then + case $libdir in + [\\/]*) + add_dir="$add_dir -L$inst_prefix_dir$libdir" + ;; + esac + fi + add="-l$name" + fi + + if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi + fi + elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. + if test "$hardcode_direct" != unsupported; then + test -n "$old_library" && linklib="$old_library" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" + else + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + $echo + $echo "*** Warning: This system can not link to static lib archive $lib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + $echo "*** But as you try to build a module library, libtool will still create " + $echo "*** a static module, that should work as long as the dlopening application" + $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test "$linkmode" = lib; then + if test -n "$dependency_libs" && + { test "$hardcode_into_libs" != yes || + test "$build_old_libs" = yes || + test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" + fi + + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi + tmp_libs="$tmp_libs $deplib" + done + + if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="$absdir" + fi + depdepl= + case $host in + *-*-darwin*) + # we do not want to link against static libs, + # but need to link against shared + eval deplibrary_names=`${SED} -n -e 's/^library_names=$.*$$/\1/p' $deplib` + if test -n "$deplibrary_names" ; then + for tmp in $deplibrary_names ; do + depdepl=$tmp + done + if test -f "$path/$depdepl" ; then + depdepl="$path/$depdepl" + fi + # do not add paths which are already there + case " $newlib_search_path " in + *" $path "*) ;; + *) newlib_search_path="$newlib_search_path $path";; + esac + fi + path="" + ;; + *) + path="-L$path" + ;; + esac + ;; + -l*) + case $host in + *-*-darwin*) + # Again, we only want to link against shared libraries + eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` + for tmp in $newlib_search_path ; do + if test -f "$tmp/lib$tmp_libs.dylib" ; then + eval depdepl="$tmp/lib$tmp_libs.dylib" + break + fi + done + path="" + ;; + *) continue ;; + esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$path $deplibs" ;; + esac + case " $deplibs " in + *" $depdepl "*) ;; + *) deplibs="$depdepl $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + dependency_libs="$newdependency_libs" + if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi + if test "$pass" != dlopen; then + if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi + + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + # FIXME: Pedantically, this is the right thing to do, so + # that some nasty dependency loop isn't accidentally + # broken: + #new_libs="$deplib $new_libs" + # Pragmatically, this seems to cause very few problems in + # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + -R*) ;; + *) + # And here is the reason: when a library appears more + # than once as an explicit dependence of a library, or + # is implicitly linked in more than once by the + # compiler, it is considered special, and multiple + # occurrences thereof are not removed. Compare this + # with having the same library being listed as a + # dependency of multiple other libraries: in this case, + # we know (pedantically, we assume) the library does not + # need to be listed more than once, so we keep only the + # last copy. This is not always right, but it is rare + # enough that we require users that really mean to play + # such unportable linking tricks to link the library + # using -Wl,-lname, so that libtool does not consider it + # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var + fi + # Last step: remove runtime libs from dependency_libs + # (they stay in deplibs) + tmp_libs= + for i in $dependency_libs ; do + case " $predeps $postdeps $compiler_lib_search_path " in + *" $i "*) + i="" + ;; + esac + if test -n "$i" ; then + tmp_libs="$tmp_libs $i" + fi + done + dependency_libs=$tmp_libs + done # for pass + if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 + fi + + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 + fi + + # Now set the variables for building old libraries. + build_libtool_libs=no + oldlibs="$output" + objs="$objs$old_deplibs" + ;; + + lib) + # Make sure we only generate libraries of the form `libNAME.la'. + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + fi + ;; + esac + + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit $EXIT_FAILURE + else + $echo + $echo "*** Warning: Linking the shared library $output against the non-libtool" + $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi + + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 + fi + + set dummy $rpath + if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" + + oldlibs= + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. + # Some compilers have problems with a `.al' extension so + # convenience libraries should have the same extension an + # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 + fi + else + + # Parse the version information argument. + save_ifs="$IFS"; IFS=':' + set dummy $vinfo 0 0 0 + IFS="$save_ifs" + + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # convert absolute version numbers to libtool ages + # this retains compatibility with .la files and attempts + # to make the code below a bit more comprehensible + + case $vinfo_number in + yes) + number_major="$2" + number_minor="$3" + number_revision="$4" + # + # There are really only two kinds -- those that + # use the current revision as the major version + # and those that subtract age and use age as + # a minor version. But, then there is irix + # which has an extra 1 added just for fun + # + case $version_type in + darwin|linux|osf|windows) + current=`expr $number_major + $number_minor` + age="$number_minor" + revision="$number_revision" + ;; + freebsd-aout|freebsd-elf|sunos) + current="$number_major" + revision="$number_minor" + age="0" + ;; + irix|nonstopux) + current=`expr $number_major + $number_minor - 1` + age="$number_minor" + revision="$number_minor" + ;; + esac + ;; + no) + current="$2" + revision="$3" + age="$4" + ;; + esac + + # Check that each of the things are valid numbers. + case $current in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $revision in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + case $age in + 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) + $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 + exit $EXIT_FAILURE + fi + + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; + + irix | nonstopux) + major=`expr $current - $age + 1` + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$revision + while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="$verstring_prefix$major.$iface:$verstring" + done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" + ;; + + linux) + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + ;; + + osf) + major=.`expr $current - $age` + versuffix=".$current.$age.$revision" + verstring="$current.$age.$revision" + + # Add in all the interfaces that we are compatible with. + loop=$age + while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" + done + + # Make executables depend on our current version. + verstring="$verstring:${current}.0" + ;; + + sunos) + major=".$current" + versuffix=".$current.$revision" + ;; + + windows) + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. + major=`expr $current - $age` + versuffix="-$major" + ;; + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 + $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring= + ;; + *) + verstring="0.0" + ;; + esac + if test "$need_version" = no; then + versuffix= + else + versuffix=".0.0" + fi + fi + + # Remove version info from name if versioning should be avoided + if test "$avoid_version" = yes && test "$need_version" = no; then + major= + versuffix= + verstring="" + fi + + # Check to see if the archive will have undefined symbols. + if test "$allow_undefined" = yes; then + if test "$allow_undefined_flag" = unsupported; then + $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + build_libtool_libs=no + build_old_libs=yes + fi + else + # Don't allow undefined symbols. + allow_undefined_flag="$no_undefined_flag" + fi + fi + + if test "$mode" != relink; then + # Remove our outputs, but don't remove object files since they + # may have been created when compiling PIC objects. + removelist= + tempremovelist=`$echo "$output_objdir/*"` + for p in $tempremovelist; do + case $p in + *.$objext) + ;; + $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) + if test "X$precious_files_regex" != "X"; then + if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then + continue + fi + fi + removelist="$removelist $p" + ;; + *) ;; + esac + done + if test -n "$removelist"; then + $show "${rm}r $removelist" + $run ${rm}r $removelist + fi + fi + + # Now set the variables for building old libraries. + if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then + oldlibs="$oldlibs $output_objdir/$libname.$libext" + + # Transform .lo files to .o files. + oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + fi + + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` + deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` + dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; + *-*-sco3.2v5* | *-*-sco5v6*) + # Causes problems with __ctype + ;; + *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) + # Compiler inserts libc in the correct place for threads to work + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + + # Transform deplibs into only deplibs that can be linked in shared. + name_save=$name + libname_save=$libname + release_save=$release + versuffix_save=$versuffix + major_save=$major + # I'm not sure if I'm treating the release correctly. I think + # release should show up in the -l (ie -lgmp5) so we don't want to + # add it in twice. Is that correct? + release="" + versuffix="" + major="" + newdeplibs= + droppeddeps=no + case $deplibs_check_method in + pass_all) + # Don't check for shared/static. Everything works. + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just + # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) + # This code stresses the "libraries are programs" paradigm to its + # limits. Maybe even breaks it. We compile a program, linking it + # against the deplibs as a proxy for the library. Then we can check + # whether they linked in statically or dynamically with ldd. + $rm conftest.c + cat > conftest.c <<EOF + int main() { return 0; } +EOF + $rm conftest + $LTCC $LTCFLAGS -o conftest conftest.c $deplibs + if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + for i in $deplibs; do + name=`expr $i : '-l$.*$'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" -ne "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which I believe you do not have" + $echo "*** because a test_compile did reveal that the linker did not use it for" + $echo "*** its dynamic dependency list that programs get resolved with at runtime." + fi + fi + else + newdeplibs="$newdeplibs $i" + fi + done + else + # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do + name=`expr $i : '-l$.*$'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + $rm conftest + $LTCC $LTCFLAGS -o conftest conftest.c $i + # Did it work? + if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $i "*) + newdeplibs="$newdeplibs $i" + i="" + ;; + esac + fi + if test -n "$i" ; then + libname=`eval \\$echo \"$libname_spec\"` + deplib_matches=`eval \\$echo \"$library_names_spec\"` + set dummy $deplib_matches + deplib_match=$2 + if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then + newdeplibs="$newdeplibs $i" + else + droppeddeps=yes + $echo + $echo "*** Warning: dynamic linker does not accept needed library $i." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because a test_compile did reveal that the linker did not use this one" + $echo "*** as a dynamic dependency that programs can get resolved with at runtime." + fi + fi + else + droppeddeps=yes + $echo + $echo "*** Warning! Library $i is needed by this library but I was not able to" + $echo "*** make it link in! You will probably need to install it or some" + $echo "*** library that it depends on before this library will be fully" + $echo "*** functional. Installing it before continuing would be even better." + fi + else + newdeplibs="$newdeplibs $i" + fi + done + fi + ;; + file_magic*) + set dummy $deplibs_check_method + file_magic_regex=`expr "$deplibs_check_method" : "$2 $.*$"` + for a_deplib in $deplibs; do + name=`expr $a_deplib : '-l$.*$'` + # If $name is empty we are operating on a -L argument. + if test "$name" != "" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then + continue + fi + # The statement above tries to avoid entering an + # endless loop below, in case of cyclic links. + # We might still enter an endless loop, since a link + # loop can be closed while we follow links, + # but so what? + potlib="$potent_lib" + while test -h "$potlib" 2>/dev/null; do + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` + case $potliblink in + [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; + *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + esac + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for file magic test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a file magic. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 $.*$"` + for a_deplib in $deplibs; do + name=`expr $a_deplib : '-l$.*$'` + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + case " $predeps $postdeps " in + *" $a_deplib "*) + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + ;; + esac + fi + if test -n "$a_deplib" ; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check above in file_magic test + if eval $echo \"$potent_lib\" 2>/dev/null \ + | ${SED} 10q \ + | $EGREP "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + fi + if test -n "$a_deplib" ; then + droppeddeps=yes + $echo + $echo "*** Warning: linker path does not have real file for library $a_deplib." + $echo "*** I have the capability to make that library automatically link in when" + $echo "*** you link to this library. But I can only do this if you have a" + $echo "*** shared version of the library, which you do not appear to have" + $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + $echo "*** with $libname and none of the candidates passed a file format test" + $echo "*** using a regex pattern. Last file checked: $potlib" + fi + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; + none | unknown | *) + newdeplibs="" + tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ + -e 's/ -[LR][^ ]*//g'` + if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then + for i in $predeps $postdeps ; do + # can't use Xsed below, because $i might contain '/' + tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + done + fi + if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ + | grep . >/dev/null; then + $echo + if test "X$deplibs_check_method" = "Xnone"; then + $echo "*** Warning: inter-library dependencies are not supported in this platform." + else + $echo "*** Warning: inter-library dependencies are not known to be supported." + fi + $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; + esac + versuffix=$versuffix_save + major=$major_save + release=$release_save + libname=$libname_save + name=$name_save + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then + $echo + $echo "*** Warning: libtool could not satisfy all declared inter-library" + $echo "*** dependencies of module $libname. Therefore, libtool will create" + $echo "*** a static module, that should work as long as the dlopening" + $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + $echo + $echo "*** However, this would only work if libtool was able to extract symbol" + $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + $echo "*** not find such a program. So, this module is probably useless." + $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + else + $echo "*** The inter-library dependencies that have been dropped here will be" + $echo "*** automatically added whenever a program is linked with this library" + $echo "*** or is declared to -dlopen it." + + if test "$allow_undefined" = no; then + $echo + $echo "*** Since this library must not contain undefined symbols," + $echo "*** because either the platform does not support them or" + $echo "*** it was explicitly requested with -no-undefined," + $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + fi + fi + # Done checking deplibs! + deplibs=$newdeplibs + fi + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + deplibs="$new_libs" + + + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= + dlname= + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then + if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + if test -n "$hardcode_libdir_flag_spec_ld"; then + eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" + else + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + + # Get the real and link names of the library. + eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" + shift; shift + + if test -n "$soname_spec"; then + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + if test -z "$dlname"; then + dlname=$soname + fi + + lib="$output_objdir/$realname" + linknames= + for link + do + linknames="$linknames $link" + done + + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + if len=`expr "X$cmd" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + $show "$cmd" + $run eval "$cmd" || exit $? + skipped_export=false + else + # The command line is too long to execute in one step. + $show "using reloadable object file for export list..." + skipped_export=: + # Break out early, otherwise skipped_export may be + # set to false by a later but shorter cmd. + break + fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then + $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" + $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi + fi + fi + + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + + tmp_deplibs= + for test_deplib in $deplibs; do + case " $convenience " in + *" $test_deplib "*) ;; + *) + tmp_deplibs="$tmp_deplibs $test_deplib" + ;; + esac + done + deplibs="$tmp_deplibs" + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + libobjs="$libobjs $func_extract_archives_result" + fi + fi + + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + fi + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + eval test_cmds=\"$module_expsym_cmds\" + cmds=$module_expsym_cmds + else + eval test_cmds=\"$module_cmds\" + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds + fi + fi + + if test "X$skipped_export" != "X:" && + len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + : + else + # The command line is too long to link in one step, link piecewise. + $echo "creating reloadable object files..." + + # Save the value of $output and $libobjs because we want to + # use them later. If we have whole_archive_flag_spec, we + # want to use save_libobjs as it was before + # whole_archive_flag_spec was expanded, because we can't + # assume the linker understands whole_archive_flag_spec. + # This may have to be revisited, in case too many + # convenience libraries get linked in and end up exceeding + # the spec. + if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then + save_libobjs=$libobjs + fi + save_output=$output + output_la=`$echo "X$output" | $Xsed -e "$basename"` + + # Clear the reloadable object creation command queue and + # initialize k to one. + test_cmds= + concat_cmds= + objlist= + delfiles= + last_robj= + k=1 + output=$output_objdir/$output_la-${k}.$objext + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + eval test_cmds=\"$reload_cmds $objlist $last_robj\" + if test "X$objlist" = X || + { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; }; then + objlist="$objlist $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + eval concat_cmds=\"$reload_cmds $objlist $last_robj\" + else + # All subsequent reloadable object files will link in + # the last one created. + eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + k=`expr $k + 1` + output=$output_objdir/$output_la-${k}.$objext + objlist=$obj + len=1 + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" + + if ${skipped_export-false}; then + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols + libobjs=$output + # Append the command to create the export file. + eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" + fi + + # Set up a command to remove the reloadable object files + # after they are used. + i=0 + while test "$i" -lt "$k" + do + i=`expr $i + 1` + delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" + done + + $echo "creating a temporary reloadable object file: $output" + + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + libobjs=$output + # Restore the value of output. + output=$save_output + + if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + fi + # Expand the library linking commands again to reset the + # value of $libobjs for piecewise linking. + + # Do each of the archive commands. + if test "$module" = yes && test -n "$module_cmds" ; then + if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then + cmds=$module_expsym_cmds + else + cmds=$module_cmds + fi + else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds + fi + fi + + # Append the command to remove the reloadable object files + # to the just-reset $cmds. + eval cmds=\"\$cmds~\$rm $delfiles\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + + if test -n "$convenience"; then + if test -z "$whole_archive_flag_spec"; then + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + fi + fi + + exit $EXIT_SUCCESS + fi + + # Create links to the real library. + for linkname in $linknames; do + if test "$realname" != "$linkname"; then + $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" + $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + fi + done + + # If -module or -export-dynamic was specified, set the dlname. + if test "$module" = yes || test "$export_dynamic" = yes; then + # On all known operating systems, these are identical. + dlname="$soname" + fi + fi + ;; + + obj) + if test -n "$deplibs"; then + $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 + fi + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 + fi + + if test -n "$rpath"; then + $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 + fi + + if test -n "$xrpath"; then + $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 + fi + + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 + fi + + case $output in + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 + exit $EXIT_FAILURE + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` + ;; + *) + libobj= + obj="$output" + ;; + esac + + # Delete the old objects. + $run $rm $obj $libobj + + # Objects from convenience libraries. This assumes + # single-version convenience libraries. Whenever we create + # different ones for PIC/non-PIC, this we'll have to duplicate + # the extraction. + reload_conv_objs= + gentop= + # reload_cmds runs $LD directly, so let us get rid of + # -Wl from whole_archive_flag_spec + wl= + + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" + generated="$generated $gentop" + + func_extract_archives $gentop $convenience + reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + + # Create the old-style object. + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + + # Exit if we aren't doing a library object file. + if test -z "$libobj"; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. + # $show "echo timestamp > $libobj" + # $run eval "echo timestamp > $libobj" || exit $? + exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" + cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + if test -n "$gentop"; then + $show "${rm}r $gentop" + $run ${rm}r $gentop + fi + + exit $EXIT_SUCCESS + ;; + + prog) + case $host in + *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 + fi + + if test -n "$release"; then + $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 + fi + + if test "$preload" = yes; then + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && + test "$dlopen_self_static" = unknown; then + $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." + fi + fi + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + case $host in + *darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + if test "$tagname" = CXX ; then + compile_command="$compile_command ${wl}-bind_at_load" + finalize_command="$finalize_command ${wl}-bind_at_load" + fi + ;; + esac + + + # move library search paths that coincide with paths to not yet + # installed libraries to the beginning of the library search list + new_libs= + for path in $notinst_path; do + case " $new_libs " in + *" -L$path/$objdir "*) ;; + *) + case " $compile_deplibs " in + *" -L$path/$objdir "*) + new_libs="$new_libs -L$path/$objdir" ;; + esac + ;; + esac + done + for deplib in $compile_deplibs; do + case $deplib in + -L*) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$new_libs $deplib" ;; + esac + ;; + *) new_libs="$new_libs $deplib" ;; + esac + done + compile_deplibs="$new_libs" + + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + + if test -n "$rpath$xrpath"; then + # If the user specified any rpath flags, then add them. + for libdir in $rpath $xrpath; do + # This is the magic to use -rpath. + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + fi + + # Now hardcode the library paths + rpath= + hardcode_libdirs= + for libdir in $compile_rpath $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + case :$dllsearchpath: in + *":$testbindir:"*) ;; + *) dllsearchpath="$dllsearchpath:$testbindir";; + esac + ;; + esac + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + compile_rpath="$rpath" + + rpath= + hardcode_libdirs= + for libdir in $finalize_rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + rpath="$rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$finalize_perm_rpath " in + *" $libdir "*) ;; + *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval rpath=\" $hardcode_libdir_flag_spec\" + fi + finalize_rpath="$rpath" + + if test -n "$libobjs" && test "$build_old_libs" = yes; then + # Transform all the library objects into standard objects. + compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + fi + + dlsyms= + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + dlsyms="${outputname}S.c" + else + $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 + fi + fi + + if test -n "$dlsyms"; then + case $dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${outputname}.nm" + + $show "$rm $nlist ${nlist}S ${nlist}T" + $run $rm "$nlist" "${nlist}S" "${nlist}T" + + # Parse the name list into a source file. + $show "creating $output_objdir/$dlsyms" + + test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ +/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ +/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +/* Prevent the only kind of declaration conflicts we can make. */ +#define lt_preloaded_symbols some_other_symbol + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + $show "generating symbol list for \`$output'" + + test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + for arg in $progfiles; do + $show "extracting global C symbols from \`$arg'" + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then + $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $run $rm $export_symbols + $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* $.*$$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + else + $run eval "${SED} -e 's/$[].[*^$]$/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* ) + $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" + name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` + $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + + if test -z "$run"; then + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if grep -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + grep -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else + $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ + +#undef lt_preloaded_symbols + +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +" + + case $host in + *cygwin* | *mingw* ) + $echo >> "$output_objdir/$dlsyms" "\ +/* DATA imports from DLLs on WIN32 can't be const, because + runtime relocations are performed -- see ld's documentation + on pseudo-relocs */ +struct { +" + ;; + * ) + $echo >> "$output_objdir/$dlsyms" "\ +const struct { +" + ;; + esac + + + $echo >> "$output_objdir/$dlsyms" "\ + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[] = +{\ +" + + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" + + $echo >> "$output_objdir/$dlsyms" "\ + {0, (lt_ptr) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + fi + + pic_flag_for_symtable= + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; + *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. + $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. + case $host in + *cygwin* | *mingw* ) + if test -f "$output_objdir/${outputname}.def" ; then + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` + else + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + fi + ;; + * ) + compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` + ;; + esac + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 + exit $EXIT_FAILURE + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" + + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" + exit_status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then + $show "$rm $output_objdir/${outputname}S.${objext}" + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + + exit $exit_status + fi + + if test -n "$shlibpath_var"; then + # We should set the shlibpath_var + rpath= + for dir in $temp_rpath; do + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) + # Absolute path. + rpath="$rpath$dir:" + ;; + *) + # Relative path: add a thisdir entry. + rpath="$rpath\$thisdir/$dir:" + ;; + esac + done + temp_rpath="$rpath" + fi + + if test -n "$compile_shlibpath$finalize_shlibpath"; then + compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" + fi + if test -n "$finalize_shlibpath"; then + finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" + fi + + compile_var= + finalize_var= + if test -n "$runpath_var"; then + if test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + compile_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + if test -n "$finalize_perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $finalize_perm_rpath; do + rpath="$rpath$dir:" + done + finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " + fi + fi + + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then + # Fast installation is not supported + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 + $echo "$modename: \`$output' will be relinked during installation" 1>&2 + else + if test "$fast_install" != no; then + link_command="$finalize_var$compile_command$finalize_rpath" + if test "$fast_install" = yes; then + relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` + else + # fast_install is set to needless + relink_command= + fi + else + link_command="$compile_var$compile_command$compile_rpath" + relink_command="$finalize_var$finalize_command$finalize_rpath" + fi + fi + + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + + # Delete the old output files. + $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + + $show "$link_command" + $run eval "$link_command" || exit $? + + # Now create the wrapper script. + $show "creating $output" + + # Quote the relink command for shipping. + if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="(cd `pwd`; $relink_command)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + fi + + # Quote $echo for shipping. + if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then + case $progpath in + [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; + *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else + qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + fi + + # Only actually do things if our run command is non-null. + if test -z "$run"; then + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in + *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) + exeext=.exe + outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac + case $host in + *cygwin* | *mingw* ) + output_name=`basename $output` + output_path=`dirname $output` + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $rm $cwrappersource $cwrapper + trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + cat > $cwrappersource <<EOF + +/* $cwrappersource - temporary wrapper executable for $objdir/$outputname + Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP + + The $output program cannot be directly executed until all the libtool + libraries that it depends on are installed. + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. + + Currently, it simply execs the wrapper *script* "/bin/sh $output", + but could eventually absorb all of the scripts functionality and + exec $objdir/$outputname directly. +*/ +EOF + cat >> $cwrappersource<<"EOF" +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <malloc.h> +#include <stdarg.h> +#include <assert.h> +#include <string.h> +#include <ctype.h> +#include <sys/stat.h> + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +/* -DDEBUG is fairly common in CFLAGS. */ +#undef DEBUG +#if defined DEBUGWRAPPER +# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) +#else +# define DEBUG(format, ...) +#endif + +const char *program_name = NULL; + +void * xmalloc (size_t num); +char * xstrdup (const char *string); +const char * base_name (const char *name); +char * find_executable(const char *wrapper); +int check_executable(const char *path); +char * strendzap(char *str, const char *pat); +void lt_fatal (const char *message, ...); + +int +main (int argc, char *argv[]) +{ + char **newargz; + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + DEBUG("(main) argv[0] : %s\n",argv[0]); + DEBUG("(main) program_name : %s\n",program_name); + newargz = XMALLOC(char *, argc+2); +EOF + + cat >> $cwrappersource <<EOF + newargz[0] = (char *) xstrdup("$SHELL"); +EOF + + cat >> $cwrappersource <<"EOF" + newargz[1] = find_executable(argv[0]); + if (newargz[1] == NULL) + lt_fatal("Couldn't find %s", argv[0]); + DEBUG("(main) found exe at : %s\n",newargz[1]); + /* we know the script has the same name, without the .exe */ + /* so make sure newargz[1] doesn't end in .exe */ + strendzap(newargz[1],".exe"); + for (i = 1; i < argc; i++) + newargz[i+1] = xstrdup(argv[i]); + newargz[argc+1] = NULL; + + for (i=0; i<argc+1; i++) + { + DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]); + ; + } + +EOF + + case $host_os in + mingw*) + cat >> $cwrappersource <<EOF + execv("$SHELL",(char const **)newargz); +EOF + ;; + *) + cat >> $cwrappersource <<EOF + execv("$SHELL",newargz); +EOF + ;; + esac + + cat >> $cwrappersource <<"EOF" + return 127; +} + +void * +xmalloc (size_t num) +{ + void * p = (void *) malloc (num); + if (!p) + lt_fatal ("Memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL +; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char)name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable(const char * path) +{ + struct stat st; + + DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) && + ( + /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ +#if defined (S_IXOTH) + ((st.st_mode & S_IXOTH) == S_IXOTH) || +#endif +#if defined (S_IXGRP) + ((st.st_mode & S_IXGRP) == S_IXGRP) || +#endif + ((st.st_mode & S_IXUSR) == S_IXUSR)) + ) + return 1; + else + return 0; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise */ +char * +find_executable (const char* wrapper) +{ + int has_slash = 0; + const char* p; + const char* p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char* concat_name; + + DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char* path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char* q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR(*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal ("getcwd failed"); + tmp_len = strlen(tmp); + concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable(concat_name)) + return concat_name; + XFREE(concat_name); + return NULL; +} + +char * +strendzap(char *str, const char *pat) +{ + size_t len, patlen; + + assert(str != NULL); + assert(pat != NULL); + + len = strlen(str); + patlen = strlen(pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp(str, pat) == 0) + *str = '\0'; + } + return str; +} + +static void +lt_error_core (int exit_status, const char * mode, + const char * message, va_list ap) +{ + fprintf (stderr, "%s: %s: ", program_name, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, "FATAL", message, ap); + va_end (ap); +} +EOF + # we should really use a build-platform specific compiler + # here, but OTOH, the wrappers (shell script and this C one) + # are only useful if you want to execute the "real" binary. + # Since the "real" binary is built for $host, then this + # wrapper might as well be built for $host, too. + $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource + ;; + esac + $rm $output + trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='${SED} -e 1s/^X//' +sed_quote_subst='$sed_quote_subst' + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variable: + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$echo are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + echo=\"$qecho\" + file=\"\$0\" + # Make sure echo works. + if test \"X\$1\" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift + elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then + # Yippee, \$echo works! + : + else + # Restart under the correct shell, and then maybe \$echo will work. + exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} + fi + fi\ +" + $echo >> $output "\ + + # Find the directory that this script lives in. + thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` + done + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $mkdir \"\$progdir\" + else + $rm \"\$progdir/\$file\" + fi" + + $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" + exit $EXIT_FAILURE + fi + fi + + $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $rm \"\$progdir/\$program\"; + $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $rm \"\$progdir/\$file\" + fi" + else + $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $echo >> $output "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +" + fi + + # fixup the dll searchpath if we need to. + if test -n "$dllsearchpath"; then + $echo >> $output "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + $echo >> $output "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $echo >> $output "\ + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" + exit $EXIT_FAILURE + fi + else + # The program doesn't exist. + \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 + $echo \"See the $PACKAGE documentation for more information.\" 1>&2 + exit $EXIT_FAILURE + fi +fi\ +" + chmod +x $output + fi + exit $EXIT_SUCCESS + ;; + esac + + # See if we need to build an old-fashioned archive. + for oldlib in $oldlibs; do + + if test "$build_libtool_libs" = convenience; then + oldobjs="$libobjs_save" + addlibs="$convenience" + build_libtool_libs=no + else + if test "$build_libtool_libs" = module; then + oldobjs="$libobjs_save" + build_libtool_libs=no + else + oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + func_extract_archives $gentop $addlibs + oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then + cmds=$old_archive_from_new_cmds + else + # POSIX demands no paths to be encoded in archives. We have + # to avoid creating archives with duplicate basenames if we + # might have to extract them afterwards, e.g., when creating a + # static archive out of a convenience library, or when linking + # the entirety of a libtool archive into another (currently + # not supported by libtool). + if (for obj in $oldobjs + do + $echo "X$obj" | $Xsed -e 's%^.*/%%' + done | sort | sort -uc >/dev/null 2>&1); then + : + else + $echo "copying selected object files to avoid basename conflicts..." + + if test -z "$gentop"; then + gentop="$output_objdir/${outputname}x" + generated="$generated $gentop" + + $show "${rm}r $gentop" + $run ${rm}r "$gentop" + $show "$mkdir $gentop" + $run $mkdir "$gentop" + exit_status=$? + if test "$exit_status" -ne 0 && test ! -d "$gentop"; then + exit $exit_status + fi + fi + + save_oldobjs=$oldobjs + oldobjs= + counter=1 + for obj in $save_oldobjs + do + objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + case " $oldobjs " in + " ") oldobjs=$obj ;; + *[\ /]"$objbase "*) + while :; do + # Make sure we don't pick an alternate name that also + # overlaps. + newobj=lt$counter-$objbase + counter=`expr $counter + 1` + case " $oldobjs " in + *[\ /]"$newobj "*) ;; + *) if test ! -f "$gentop/$newobj"; then break; fi ;; + esac + done + $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + $run ln "$obj" "$gentop/$newobj" || + $run cp "$obj" "$gentop/$newobj" + oldobjs="$oldobjs $gentop/$newobj" + ;; + *) oldobjs="$oldobjs $obj" ;; + esac + done + fi + + eval cmds=\"$old_archive_cmds\" + + if len=`expr "X$cmds" : ".*"` && + test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + else + # the command line is too long to link in one step, link in parts + $echo "using piecewise archive linking..." + save_RANLIB=$RANLIB + RANLIB=: + objlist= + concat_cmds= + save_oldobjs=$oldobjs + + # Is there a better way of finding the last object in the list? + for obj in $save_oldobjs + do + last_oldobj=$obj + done + for obj in $save_oldobjs + do + oldobjs="$objlist $obj" + objlist="$objlist $obj" + eval test_cmds=\"$old_archive_cmds\" + if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && + test "$len" -le "$max_cmd_len"; then + : + else + # the above command should be used before it gets too long + oldobjs=$objlist + if test "$obj" = "$last_oldobj" ; then + RANLIB=$save_RANLIB + fi + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" + objlist= + fi + done + RANLIB=$save_RANLIB + oldobjs=$objlist + if test "X$oldobjs" = "X" ; then + eval cmds=\"\$concat_cmds\" + else + eval cmds=\"\$concat_cmds~\$old_archive_cmds\" + fi + fi + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + eval cmd=\"$cmd\" + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$generated"; then + $show "${rm}r$generated" + $run ${rm}r$generated + fi + + # Now create the libtool archive. + case $output in + *.la) + old_library= + test "$build_old_libs" = yes && old_library="$libname.$libext" + $show "creating $output" + + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` + if test "$hardcode_automatic" = yes ; then + relink_command= + fi + + + # Only create the output if not a dry run. + if test -z "$run"; then + for installed in no yes; do + if test "$installed" = yes; then + if test -z "$install_libdir"; then + break + fi + output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`${SED} -n -e 's/^libdir=$.*$$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit $EXIT_FAILURE + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" + else + newdlfiles= + for lib in $dlfiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlfiles="$newdlfiles $abs" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + case $lib in + [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; + *) abs=`pwd`"/$lib" ;; + esac + newdlprefiles="$newdlprefiles $abs" + done + dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ +# $outputname - a libtool library file +# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# The name that we can dlopen(3). +dlname='$tdlname' + +# Names of this library. +library_names='$library_names' + +# The name of the static archive. +old_library='$old_library' + +# Libraries that this one depends upon. +dependency_libs='$dependency_libs' + +# Version information for $libname. +current=$current +age=$age +revision=$revision + +# Is this an already installed library? +installed=$installed + +# Should we warn about portability when linking against -modules? +shouldnotlink=$module + +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + +# Directory that this library needs to be installed in: +libdir='$install_libdir'" + if test "$installed" = no && test "$need_relink" = yes; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi + done + fi + + # Do a symbolic link so that the libtool archive can be found in + # LD_LIBRARY_PATH before the program is installed. + $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac + exit $EXIT_SUCCESS + ;; + + # libtool install mode + install) + modename="$modename: install" + + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$arg " + arg="$1" + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog$arg" + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + for arg + do + if test -n "$dest"; then + files="$files $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + case " $install_prog " in + *[\\\ /]cp\ *) ;; + *) prev=$arg ;; + esac + ;; + -g | -m | -o) prev=$arg ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + install_prog="$install_prog $arg" + done + + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + if test -z "$files"; then + if test -z "$dest"; then + $echo "$modename: no file or destination specified" 1>&2 + else + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Strip any trailing slash from the destination. + dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` + test "X$destdir" = "X$dest" && destdir=. + destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` + + # Not a directory, so check to see that there is only one file specified. + set dummy $files + if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + staticlibs="$staticlibs $file" + ;; + + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + library_names= + old_library= + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) current_libdirs="$current_libdirs $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) future_libdirs="$future_libdirs $libdir" ;; + esac + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ + test "X$dir" = "X$file/" && dir= + dir="$dir$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + if test "$inst_prefix_dir" = "$destdir"; then + $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 + exit $EXIT_FAILURE + fi + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + exit $EXIT_FAILURE + fi + fi + + # See the names of the shared library. + set dummy $library_names + if test -n "$2"; then + realname="$2" + shift + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + if test "$linkname" != "$realname"; then + $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + cmds=$postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + fi + + exit $lt_exit + } + done + IFS="$save_ifs" + fi + + # Install the pseudo-library for information purposes. + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + instname="$dir/$name"i + $show "$install_prog $instname $destdir/$name" + $run eval "$install_prog $instname $destdir/$name" || exit $? + + # Maybe install the static library, too. + test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + # Install the libtool object if requested. + if test -n "$destfile"; then + $show "$install_prog $file $destfile" + $run eval "$install_prog $file $destfile" || exit $? + fi + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` + + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + file=`$echo $file|${SED} 's,.exe$,,'` + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) + wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 + exit $EXIT_FAILURE + fi + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + # If there is no directory component, then add one. + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; + esac + fi + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 + finalize=no + fi + done + + relink_command= + # Note that it is not necessary on cygwin/mingw to append a dot to + # foo even if both foo and FILE.exe exist: automatic-append-.exe + # behavior happens only for exec(3), not for open(2)! Also, sourcing + # `FILE.' does not work on cygwin managed mounts. + # + # If there is no directory component, then add one. + case $wrapper in + */* | *\\*) . ${wrapper} ;; + *) . ./${wrapper} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then + tmpdir=`func_mktempdir` + file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` + + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + ${rm}r "$tmpdir" + continue + fi + file="$outputname" + else + $echo "$modename: warning: cannot relink \`$file'" 1>&2 + fi + else + # Install the binary that we compiled earlier. + file=`$echo "X$file$stripped_ext" | $Xsed -e "s%$[^/]*$$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; + esac + $show "$install_prog$stripme $file $destfile" + $run eval "$install_prog\$stripme \$file \$destfile" || exit $? + test -n "$outputname" && ${rm}r "$tmpdir" + ;; + esac + done + + for file in $staticlibs; do + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + + if test -n "$stripme" && test -n "$old_striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. + cmds=$old_postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + done + + if test -n "$future_libdirs"; then + $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 + fi + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi + ;; + + # libtool finish mode + finish) + modename="$modename: finish" + libdirs="$nonopt" + admincmds= + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for dir + do + libdirs="$libdirs $dir" + done + + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + cmds=$finish_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" + done + IFS="$save_ifs" + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $run eval "$cmds" || admincmds="$admincmds + $cmds" + fi + done + fi + + # Exit here if they wanted silent mode. + test "$show" = : && exit $EXIT_SUCCESS + + $echo "X----------------------------------------------------------------------" | $Xsed + $echo "Libraries have been installed in:" + for libdir in $libdirs; do + $echo " $libdir" + done + $echo + $echo "If you ever happen to want to link against installed libraries" + $echo "in a given directory, LIBDIR, you must either use libtool, and" + $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + $echo " during execution" + fi + if test -n "$runpath_var"; then + $echo " - add LIBDIR to the \`$runpath_var' environment variable" + $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + $echo + $echo "See any operating system documentation about shared libraries for" + $echo "more information, such as the ld(1) and ld.so(8) manual pages." + $echo "X----------------------------------------------------------------------" | $Xsed + exit $EXIT_SUCCESS + ;; + + # libtool execute mode + execute) + modename="$modename: execute" + + # The first argument is the command name. + cmd="$nonopt" + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" + exit $EXIT_FAILURE + fi + + # Handle -dlopen flags immediately. + for file in $execute_dlfiles; do + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Read the libtool library. + dlname= + library_names= + + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" + continue + fi + + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + + if test -f "$dir/$objdir/$dlname"; then + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 + exit $EXIT_FAILURE + fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$file" && dir=. + ;; + + *) + $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" + fi + done + + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" + + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -*) ;; + *) + # Do a test to see if this is really a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` + args="$args \"$file\"" + done + + if test -z "$run"; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi + if test "${save_LANG+set}" = set; then + LANG="$save_LANG"; export LANG + fi + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" + exit $EXIT_SUCCESS + fi + ;; + + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" + rm="$nonopt" + files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + for arg + do + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; + -*) rm="$rm $arg" ;; + *) files="$files $arg" ;; + esac + done + + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + fi + + rmdirs= + + origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. + objdir="$origobjdir" + else + objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi + + rmfiles="$file" + + case $name in + *.la) + # Possibly a libtool archive, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. + for n in $library_names; do + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + + case "$mode" in + clean) + case " $library_names " in + # " " in the beginning catches empty $dlname + *" $dlname "*) ;; + *) rmfiles="$rmfiles $objdir/$dlname" ;; + esac + test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + ;; + uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + cmds=$postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + cmds=$old_postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" + if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. + ;; + esac + fi + ;; + + *.lo) + # Possibly a libtool object, so verify it. + if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + + # Read the .lo file + . $dir/$name + + # Add PIC object to the list of files to remove. + if test -n "$pic_object" \ + && test "$pic_object" != none; then + rmfiles="$rmfiles $dir/$pic_object" + fi + + # Add non-PIC object to the list of files to remove. + if test -n "$non_pic_object" \ + && test "$non_pic_object" != none; then + rmfiles="$rmfiles $dir/$non_pic_object" + fi + fi + ;; + + *) + if test "$mode" = clean ; then + noexename=$name + case $file in + *.exe) + file=`$echo $file|${SED} 's,.exe$,,'` + noexename=`$echo $name|${SED} 's,.exe$,,'` + # $file with .exe has already been added to rmfiles, + # add $file without .exe + rmfiles="$rmfiles $file" + ;; + esac + # Do a test to see if this is a libtool program. + if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$noexename + + # note $name still contains .exe if it was in $file originally + # as does the version of $file that was added into $rmfiles + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + if test "X$noexename" != "X$name" ; then + rmfiles="$rmfiles $objdir/lt-${noexename}.c" + fi + fi + fi + ;; + esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done + objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status + ;; + + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 + exit $EXIT_FAILURE + fi +fi # test -z "$show_help" + +if test -n "$exec_cmd"; then + eval exec $exec_cmd + exit $EXIT_FAILURE +fi + +# We need to display help for each of the modes. +case $mode in +"") $echo \ +"Usage: $modename [OPTION]... [MODE-ARG]... + +Provide generalized library-building support services. + + --config show all configuration variables + --debug enable verbose shell tracing +-n, --dry-run display commands without modifying any files + --features display basic configuration information and exit + --finish same as \`--mode=finish' + --help display this help message and exit + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages + --tag=TAG use configuration variables from tag TAG + --version print version information + +MODE must be one of the following: + + clean remove files from the build directory + compile compile a source file into a libtool object + execute automatically set library path, then run a program + finish complete the installation of libtool libraries + install install libraries or executables + link create a library or an executable + uninstall remove libraries from an installed directory + +MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +a more detailed description of MODE. + +Report bugs to <bug-libtool(a)gnu.org>." + exit $EXIT_SUCCESS + ;; + +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + +compile) + $echo \ +"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only + -static always build a \`.o' file suitable for static linking + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + +execute) + $echo \ +"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + +finish) + $echo \ +"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + +install) + $echo \ +"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + +link) + $echo \ +"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -static do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + +uninstall) + $echo \ +"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + +*) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 + exit $EXIT_FAILURE + ;; +esac + +$echo +$echo "Try \`$modename --help' for more information about other modes." + +exit $? + +# The TAGs below are defined such that we never get into a situation +# in which we disable both kinds of libraries. Given conflicting +# choices, we go for a static library, that is the most portable, +# since we can't tell whether shared libraries were disabled because +# the user asked for that or because the platform doesn't support +# them. This is particularly important on AIX, because we don't +# support having both static and shared libraries enabled at the same +# time on that platform, so we default to a shared-only configuration. +# If a disable-shared tag is given, we'll fallback to a static-only +# configuration. But we'll never go from static-only to shared-only. + +# ### BEGIN LIBTOOL TAG CONFIG: disable-shared +disable_libs=shared +# ### END LIBTOOL TAG CONFIG: disable-shared + +# ### BEGIN LIBTOOL TAG CONFIG: disable-static +disable_libs=static +# ### END LIBTOOL TAG CONFIG: disable-static + +# Local Variables: +# mode:shell-script +# sh-indentation:2 +# End: Added: freeswitch/trunk/libs/iksemel/build/missing ============================================================================== --- (empty file) +++ freeswitch/trunk/libs/iksemel/build/missing Mon Mar 12 11:59:06 2007 @@ -0,0 +1,353 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2004-09-07.08 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard(a)iro.umontreal.ca>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake(a)gnu.org>." + exit 0 + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit 0 + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER($[^)]*$).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*$[^ ]*$.*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*$[^ ]*$.*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=$[^ ]*$.*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed 's/.* $[^ ]*$ *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* $[^ ]*$ *$/\1/; p; q; }' $file` + fi + touch $file + ;; + + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: Modified: freeswitch/trunk/libs/iksemel/configure ============================================================================== --- freeswitch/trunk/libs/iksemel/configure (original) +++ freeswitch/trunk/libs/iksemel/configure Mon Mar 12 11:59:06 2007 @@ -1497,10 +1497,8 @@ - -am__api_version="1.9" ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +for ac_dir in build $srcdir/build; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -1516,14 +1514,16 @@ fi done if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in build $srcdir/build" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in build $srcdir/build" >&2;} { (exit 1); exit 1; }; } fi ac_config_guess="$SHELL $ac_aux_dir/config.guess" ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + +am__api_version="1.9" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: Modified: freeswitch/trunk/libs/iksemel/configure.ac ============================================================================== --- freeswitch/trunk/libs/iksemel/configure.ac (original) +++ freeswitch/trunk/libs/iksemel/configure.ac Mon Mar 12 11:59:06 2007 @@ -1,6 +1,7 @@ dnl Process this file with autoconf to produce a configure script. AC_INIT AC_PREREQ(2.50) +AC_CONFIG_AUX_DIR(build) AC_CONFIG_SRCDIR([configure.ac]) AM_INIT_AUTOMAKE(iksemel,1.2) AM_CONFIG_HEADER(include/config.h) Modified: freeswitch/trunk/libs/iksemel/doc/Makefile.in ============================================================================== --- freeswitch/trunk/libs/iksemel/doc/Makefile.in (original) +++ freeswitch/trunk/libs/iksemel/doc/Makefile.in Mon Mar 12 11:59:06 2007 @@ -36,19 +36,20 @@ build_triplet = @build@ host_triplet = @host@ subdir = doc -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in texinfo.tex +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/build/libgnutls.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = INFO_DEPS = $(srcdir)/iksemel -am__TEXINFO_TEX_DIR = $(srcdir) +TEXINFO_TEX = $(top_srcdir)/build/texinfo.tex +am__TEXINFO_TEX_DIR = $(top_srcdir)/build DVIS = iksemel.dvi PDFS = iksemel.pdf PSS = iksemel.ps Modified: freeswitch/trunk/libs/iksemel/include/Makefile.in ============================================================================== --- freeswitch/trunk/libs/iksemel/include/Makefile.in (original) +++ freeswitch/trunk/libs/iksemel/include/Makefile.in Mon Mar 12 11:59:06 2007 @@ -45,7 +45,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = SOURCES = Modified: freeswitch/trunk/libs/iksemel/src/Makefile.in ============================================================================== --- freeswitch/trunk/libs/iksemel/src/Makefile.in (original) +++ freeswitch/trunk/libs/iksemel/src/Makefile.in Mon Mar 12 11:59:06 2007 @@ -45,7 +45,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_CLEAN_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; @@ -70,7 +70,7 @@ libiksemel_la-md5.lo libiksemel_la-base64.lo libiksemel_la_OBJECTS = $(am_libiksemel_la_OBJECTS) DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -depcomp = $(SHELL) $(top_srcdir)/depcomp +depcomp = $(SHELL) $(top_srcdir)/build/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) Modified: freeswitch/trunk/libs/iksemel/test/Makefile.in ============================================================================== --- freeswitch/trunk/libs/iksemel/test/Makefile.in (original) +++ freeswitch/trunk/libs/iksemel/test/Makefile.in Mon Mar 12 11:59:06 2007 @@ -48,7 +48,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_CLEAN_FILES = PROGRAMS = $(noinst_PROGRAMS) @@ -77,7 +77,7 @@ tst_sha_OBJECTS = $(am_tst_sha_OBJECTS) tst_sha_DEPENDENCIES = $(top_builddir)/src/libiksemel.la DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -depcomp = $(SHELL) $(top_srcdir)/depcomp +depcomp = $(SHELL) $(top_srcdir)/build/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) Modified: freeswitch/trunk/libs/iksemel/tools/Makefile.in ============================================================================== --- freeswitch/trunk/libs/iksemel/tools/Makefile.in (original) +++ freeswitch/trunk/libs/iksemel/tools/Makefile.in Mon Mar 12 11:59:06 2007 @@ -48,7 +48,7 @@ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(bindir)" @@ -64,7 +64,7 @@ iksroster_OBJECTS = $(am_iksroster_OBJECTS) iksroster_DEPENDENCIES = $(top_builddir)/src/libiksemel.la DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -depcomp = $(SHELL) $(top_srcdir)/depcomp +depcomp = $(SHELL) $(top_srcdir)/build/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

1 0