[Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7> looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
I have created manual to build all dependences from scratch. https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system? Bote From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions I have created manual to build all dependences from scratch. https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>: Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch. https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository>
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
--- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence <http://freeswitch.org/confluence>
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7>
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed. Once I know where to look I can piece things together, but I definitely need guidance. Thanks. Bote From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section. On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote: Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system? Bote From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions I have created manual to build all dependences from scratch. <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository> https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com>: Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [mailto: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7> https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch. https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository>
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
--- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence <http://freeswitch.org/confluence>
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7>
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
Bote i can update this instructions. Ping me after one week. чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 13:15 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
--- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of* Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect. I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what?? So if Mike is OK with Sergey handling this, then I am certainly OK with it. Bote From: Sergey Safarov Sent: Thursday, 22 December, 2016 13:48 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions Bote i can update this instructions. Ping me after one week. чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>: The source build instructions should tell people to use the packages for the deps. On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote: Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed. Once I know where to look I can piece things together, but I definitely need guidance. Thanks. Bote From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section. On Dec 22, 2016, at 1:11 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system? Bote From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions I have created manual to build all dependences from scratch. <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository> https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com>: Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [mailto: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7> https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file… From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Bote Man Sent: Thursday, December 22, 2016 2:00 PM To: 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> Subject: Re: [Freeswitch-docs] centos7 install instructions At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect. I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what?? So if Mike is OK with Sergey handling this, then I am certainly OK with it. Bote From: Sergey Safarov Sent: Thursday, 22 December, 2016 13:48 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions Bote i can update this instructions. Ping me after one week. чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com> >: The source build instructions should tell people to use the packages for the deps. On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com> > wrote: Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed. Once I know where to look I can piece things together, but I definitely need guidance. Thanks. Bote From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section. On Dec 22, 2016, at 1:11 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system? Bote From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions I have created manual to build all dependences from scratch. <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository> https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com>: Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [mailto: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7> https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists. Bote From: Ken Rice Sent: Thursday, 22 December, 2016 15:23 To: 'FreeSWITCH Docs Team' Subject: Re: [Freeswitch-docs] centos7 install instructions The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file… From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Bote Man Sent: Thursday, December 22, 2016 2:00 PM To: 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> Subject: Re: [Freeswitch-docs] centos7 install instructions At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect. I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what?? So if Mike is OK with Sergey handling this, then I am certainly OK with it. Bote From: Sergey Safarov Sent: Thursday, 22 December, 2016 13:48 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions Bote i can update this instructions. Ping me after one week. чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>: The source build instructions should tell people to use the packages for the deps. On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote: Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed. Once I know where to look I can piece things together, but I definitely need guidance. Thanks. Bote From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section. On Dec 22, 2016, at 1:11 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system? Bote From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions I have created manual to build all dependences from scratch. <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository> https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com>: Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [mailto: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7> https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
From: Ken Rice Sent: Thursday, 22 December, 2016 15:23 To: 'FreeSWITCH Docs Team' Subject: Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Bote Man Sent: Thursday, December 22, 2016 2:00 PM To: 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org <mailto:freeswitch-docs@lists.freeswitch.org>> Subject: Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
From: Sergey Safarov Sent: Thursday, 22 December, 2016 13:48 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch. https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository>
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
--- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence <http://freeswitch.org/confluence>
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7>
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
OK, I’m working on this now. Is this version syntax recognized by the build system? BuildRequires: libvpx2-devel >= 2.0.0 BuildRequires: libyuv-devel >= 0.0.1280 BuildRequires: soundtouch-devel >= 1.7.1 I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum. Thanks. Bote From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 15:40 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote: That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists. Bote From: Ken Rice Sent: Thursday, 22 December, 2016 15:23 To: 'FreeSWITCH Docs Team' Subject: Re: [Freeswitch-docs] centos7 install instructions The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file… From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Bote Man Sent: Thursday, December 22, 2016 2:00 PM To: 'FreeSWITCH Docs Team' < <mailto:freeswitch-docs@lists.freeswitch.org> freeswitch-docs@lists.freeswitch.org> Subject: Re: [Freeswitch-docs] centos7 install instructions At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect. I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what?? So if Mike is OK with Sergey handling this, then I am certainly OK with it. Bote From: Sergey Safarov Sent: Thursday, 22 December, 2016 13:48 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions Bote i can update this instructions. Ping me after one week. чт, 22 дек. 2016 г. в 21:41, Michael Jerris < <mailto:mike@jerris.com> mike@jerris.com>: The source build instructions should tell people to use the packages for the deps. On Dec 22, 2016, at 1:27 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed. Once I know where to look I can piece things together, but I definitely need guidance. Thanks. Bote From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section. On Dec 22, 2016, at 1:11 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system? Bote From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions I have created manual to build all dependences from scratch. <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository> https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com>: Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [mailto: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7> https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
don’t need vpx or yuv
On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote:
OK, I’m working on this now.
Is this version syntax recognized by the build system? BuildRequires: libvpx2-devel >= 2.0.0 BuildRequires: libyuv-devel >= 0.0.1280 BuildRequires: soundtouch-devel >= 1.7.1
I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum.
Thanks.
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 15:40 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
From: Ken Rice Sent: Thursday, 22 December, 2016 15:23 To: 'FreeSWITCH Docs Team' Subject: Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Bote Man Sent: Thursday, December 22, 2016 2:00 PM To: 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org <mailto:freeswitch-docs@lists.freeswitch.org>> Subject: Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
From: Sergey Safarov Sent: Thursday, 22 December, 2016 13:48 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com <mailto:mike@jerris.com>>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch. https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository>
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com <mailto:bote_radio@botecomm.com>>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
--- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence <http://freeswitch.org/confluence>
From: freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org> [mailto:freeswitch-docs-bounces@lists.freeswitch.org <mailto:freeswitch-docs-bounces@lists.freeswitch.org>] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7>
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org <mailto:Freeswitch-docs@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs>
Try her now, Mr. Kyle! Some obvious dependencies (wget, git) originally listed on the wiki were not found in the freeswitch.spec file so I included them, so along some others there might be some bloat in there. Also, in the comments section of the old Centos 7 DEPRECATED page Gavin Henry says speexdsp-devel is needed, too. Is that still true? Bote From: Michael Jerris Sent: Thursday, 22 December, 2016 17:10 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions don’t need vpx or yuv On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote: OK, I’m working on this now. Is this version syntax recognized by the build system? BuildRequires: libvpx2-devel >= 2.0.0 BuildRequires: libyuv-devel >= 0.0.1280 BuildRequires: soundtouch-devel >= 1.7.1 I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum. Thanks. Bote From: freeswitch-docs-bounces@lists.freeswitch.org [mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 15:40 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section On Dec 22, 2016, at 3:36 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists. Bote From: Ken Rice Sent: Thursday, 22 December, 2016 15:23 To: 'FreeSWITCH Docs Team' Subject: Re: [Freeswitch-docs] centos7 install instructions The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file… From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Bote Man Sent: Thursday, December 22, 2016 2:00 PM To: 'FreeSWITCH Docs Team' < <mailto:freeswitch-docs@lists.freeswitch.org> freeswitch-docs@lists.freeswitch.org> Subject: Re: [Freeswitch-docs] centos7 install instructions At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect. I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what?? So if Mike is OK with Sergey handling this, then I am certainly OK with it. Bote From: Sergey Safarov Sent: Thursday, 22 December, 2016 13:48 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions Bote i can update this instructions. Ping me after one week. чт, 22 дек. 2016 г. в 21:41, Michael Jerris < <mailto:mike@jerris.com> mike@jerris.com>: The source build instructions should tell people to use the packages for the deps. On Dec 22, 2016, at 1:27 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed. Once I know where to look I can piece things together, but I definitely need guidance. Thanks. Bote From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 13:15 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section. On Dec 22, 2016, at 1:11 PM, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com> wrote: Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system? Bote From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [ <mailto:freeswitch-docs-bounces@lists.freeswitch.org> mailto:freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Sergey Safarov Sent: Thursday, 22 December, 2016 12:57 To: FreeSWITCH Docs Team Subject: Re: [Freeswitch-docs] centos7 install instructions I have created manual to build all dependences from scratch. <https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository> https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository Also i has several open pull requests for this instructions. чт, 22 дек. 2016 г. в 20:14, Bote Man < <mailto:bote_radio@botecomm.com> bote_radio@botecomm.com>: Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “freeswitch-video-deps-most” to take on my end. How does one go about figuring out the dependencies for a particular build? Would it be better to provide a package of dependencies similar to the one above for Debian? --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org [mailto: <mailto:freeswitch-docs-bounces@lists.freeswitch.org> freeswitch-docs-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, 22 December, 2016 12:06 To: FreeSWITCH Docs Team Subject: [Freeswitch-docs] centos7 install instructions <https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7> https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7 looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs _______________________________________________ Freeswitch-docs mailing list <mailto:Freeswitch-docs@lists.freeswitch.org> Freeswitch-docs@lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs> http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
Hello Bote I tested instuctions simple build and creation freeswitch packages. I made changes to founded issues. One issue is still exist When you try build release (1.6.13) is requred nasm. This will be fixed when released 1.6.14 And second issue - requred libvpx2-devel. This is must be fixed in master. Mike could you remove libvpx2-devel dependency from SPEC file in master? пт, 23 дек. 2016 г. в 1:36, Bote Man <bote_radio@botecomm.com>:
Try her now, Mr. Kyle!
Some obvious dependencies (wget, git) originally listed on the wiki were not found in the freeswitch.spec file so I included them, so along some others there might be some bloat in there.
Also, in the comments section of the old Centos 7 DEPRECATED page Gavin Henry says speexdsp-devel is needed, too. Is that still true?
Bote
*From:* Michael Jerris *Sent:* Thursday, 22 December, 2016 17:10
*To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
don’t need vpx or yuv
On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote:
OK, I’m working on this now.
Is this version syntax recognized by the build system?
BuildRequires: libvpx2-devel *>= 2.0.0*
BuildRequires: libyuv-devel *>= 0.0.1280*
BuildRequires: soundtouch-devel *>= 1.7.1*
I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 15:40 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
*From:* Ken Rice *Sent:* Thursday, 22 December, 2016 15:23 *To:* 'FreeSWITCH Docs Team' *Subject:* Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Bote Man *Sent:* Thursday, December 22, 2016 2:00 PM *To:* 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> *Subject:* Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
*From:* Sergey Safarov *Sent:* Thursday, 22 December, 2016 13:48 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Michael Jerris *Sent:* Thursday, 22 December, 2016 13:15 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
throw me a pr for the spec change and no problem. Why do you think nasm dep will change? On Wed, Dec 28, 2016 at 8:58 AM Sergey Safarov <s.safarov@gmail.com> wrote:
Hello Bote I tested instuctions simple build and creation freeswitch packages. I made changes to founded issues.
One issue is still exist When you try build release (1.6.13) is requred nasm. This will be fixed when released 1.6.14
And second issue - requred libvpx2-devel. This is must be fixed in master.
Mike could you remove libvpx2-devel dependency from SPEC file in master?
пт, 23 дек. 2016 г. в 1:36, Bote Man <bote_radio@botecomm.com>:
Try her now, Mr. Kyle!
Some obvious dependencies (wget, git) originally listed on the wiki were not found in the freeswitch.spec file so I included them, so along some others there might be some bloat in there.
Also, in the comments section of the old Centos 7 DEPRECATED page Gavin Henry says speexdsp-devel is needed, too. Is that still true?
Bote
*From:* Michael Jerris *Sent:* Thursday, 22 December, 2016 17:10
*To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
don’t need vpx or yuv
On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote:
OK, I’m working on this now.
Is this version syntax recognized by the build system?
BuildRequires: libvpx2-devel *>= 2.0.0*
BuildRequires: libyuv-devel *>= 0.0.1280*
BuildRequires: soundtouch-devel *>= 1.7.1*
I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 15:40 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
*From:* Ken Rice *Sent:* Thursday, 22 December, 2016 15:23 *To:* 'FreeSWITCH Docs Team' *Subject:* Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Bote Man *Sent:* Thursday, December 22, 2016 2:00 PM *To:* 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> *Subject:* Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
*From:* Sergey Safarov *Sent:* Thursday, 22 December, 2016 13:48 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Michael Jerris *Sent:* Thursday, 22 December, 2016 13:15 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
I think nasm deps is fixed in master when resolved FS-9582 <https://freeswitch.org/jira/browse/FS-9582> PR i will create. ср, 28 дек. 2016 г. в 18:51, Michael Jerris <mike@jerris.com>:
throw me a pr for the spec change and no problem. Why do you think nasm dep will change?
On Wed, Dec 28, 2016 at 8:58 AM Sergey Safarov <s.safarov@gmail.com> wrote:
Hello Bote I tested instuctions simple build and creation freeswitch packages. I made changes to founded issues.
One issue is still exist When you try build release (1.6.13) is requred nasm. This will be fixed when released 1.6.14
And second issue - requred libvpx2-devel. This is must be fixed in master.
Mike could you remove libvpx2-devel dependency from SPEC file in master?
пт, 23 дек. 2016 г. в 1:36, Bote Man <bote_radio@botecomm.com>:
Try her now, Mr. Kyle!
Some obvious dependencies (wget, git) originally listed on the wiki were not found in the freeswitch.spec file so I included them, so along some others there might be some bloat in there.
Also, in the comments section of the old Centos 7 DEPRECATED page Gavin Henry says speexdsp-devel is needed, too. Is that still true?
Bote
*From:* Michael Jerris *Sent:* Thursday, 22 December, 2016 17:10
*To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
don’t need vpx or yuv
On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote:
OK, I’m working on this now.
Is this version syntax recognized by the build system?
BuildRequires: libvpx2-devel *>= 2.0.0*
BuildRequires: libyuv-devel *>= 0.0.1280*
BuildRequires: soundtouch-devel *>= 1.7.1*
I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 15:40 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
*From:* Ken Rice *Sent:* Thursday, 22 December, 2016 15:23 *To:* 'FreeSWITCH Docs Team' *Subject:* Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Bote Man *Sent:* Thursday, December 22, 2016 2:00 PM *To:* 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> *Subject:* Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
*From:* Sergey Safarov *Sent:* Thursday, 22 December, 2016 13:48 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Michael Jerris *Sent:* Thursday, 22 December, 2016 13:15 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
that's incorrect. libvpx won't build with nasm On Wed, Dec 28, 2016 at 11:00 AM Sergey Safarov <s.safarov@gmail.com> wrote:
I think nasm deps is fixed in master when resolved FS-9582 <https://freeswitch.org/jira/browse/FS-9582> PR i will create.
ср, 28 дек. 2016 г. в 18:51, Michael Jerris <mike@jerris.com>:
throw me a pr for the spec change and no problem. Why do you think nasm dep will change?
On Wed, Dec 28, 2016 at 8:58 AM Sergey Safarov <s.safarov@gmail.com> wrote:
Hello Bote I tested instuctions simple build and creation freeswitch packages. I made changes to founded issues.
One issue is still exist When you try build release (1.6.13) is requred nasm. This will be fixed when released 1.6.14
And second issue - requred libvpx2-devel. This is must be fixed in master.
Mike could you remove libvpx2-devel dependency from SPEC file in master?
пт, 23 дек. 2016 г. в 1:36, Bote Man <bote_radio@botecomm.com>:
Try her now, Mr. Kyle!
Some obvious dependencies (wget, git) originally listed on the wiki were not found in the freeswitch.spec file so I included them, so along some others there might be some bloat in there.
Also, in the comments section of the old Centos 7 DEPRECATED page Gavin Henry says speexdsp-devel is needed, too. Is that still true?
Bote
*From:* Michael Jerris *Sent:* Thursday, 22 December, 2016 17:10
*To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
don’t need vpx or yuv
On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote:
OK, I’m working on this now.
Is this version syntax recognized by the build system?
BuildRequires: libvpx2-devel *>= 2.0.0*
BuildRequires: libyuv-devel *>= 0.0.1280*
BuildRequires: soundtouch-devel *>= 1.7.1*
I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 15:40 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
*From:* Ken Rice *Sent:* Thursday, 22 December, 2016 15:23 *To:* 'FreeSWITCH Docs Team' *Subject:* Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Bote Man *Sent:* Thursday, December 22, 2016 2:00 PM *To:* 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> *Subject:* Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
*From:* Sergey Safarov *Sent:* Thursday, 22 December, 2016 13:48 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Michael Jerris *Sent:* Thursday, 22 December, 2016 13:15 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
And nasm extra dependence is removed from SPEC file. ср, 28 дек. 2016, 19:04 Michael Jerris <mike@jerris.com>:
that's incorrect. libvpx won't build with nasm
On Wed, Dec 28, 2016 at 11:00 AM Sergey Safarov <s.safarov@gmail.com> wrote:
I think nasm deps is fixed in master when resolved FS-9582 <https://freeswitch.org/jira/browse/FS-9582> PR i will create.
ср, 28 дек. 2016 г. в 18:51, Michael Jerris <mike@jerris.com>:
throw me a pr for the spec change and no problem. Why do you think nasm dep will change?
On Wed, Dec 28, 2016 at 8:58 AM Sergey Safarov <s.safarov@gmail.com> wrote:
Hello Bote I tested instuctions simple build and creation freeswitch packages. I made changes to founded issues.
One issue is still exist When you try build release (1.6.13) is requred nasm. This will be fixed when released 1.6.14
And second issue - requred libvpx2-devel. This is must be fixed in master.
Mike could you remove libvpx2-devel dependency from SPEC file in master?
пт, 23 дек. 2016 г. в 1:36, Bote Man <bote_radio@botecomm.com>:
Try her now, Mr. Kyle!
Some obvious dependencies (wget, git) originally listed on the wiki were not found in the freeswitch.spec file so I included them, so along some others there might be some bloat in there.
Also, in the comments section of the old Centos 7 DEPRECATED page Gavin Henry says speexdsp-devel is needed, too. Is that still true?
Bote
*From:* Michael Jerris *Sent:* Thursday, 22 December, 2016 17:10
*To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
don’t need vpx or yuv
On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote:
OK, I’m working on this now.
Is this version syntax recognized by the build system?
BuildRequires: libvpx2-devel *>= 2.0.0*
BuildRequires: libyuv-devel *>= 0.0.1280*
BuildRequires: soundtouch-devel *>= 1.7.1*
I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 15:40 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
*From:* Ken Rice *Sent:* Thursday, 22 December, 2016 15:23 *To:* 'FreeSWITCH Docs Team' *Subject:* Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Bote Man *Sent:* Thursday, December 22, 2016 2:00 PM *To:* 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> *Subject:* Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
*From:* Sergey Safarov *Sent:* Thursday, 22 December, 2016 13:48 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Michael Jerris *Sent:* Thursday, 22 December, 2016 13:15 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
Hello Mike PR to fix libvpx dependency is created https://freeswitch.org/stash/projects/FS/repos/freeswitch/pull-requests/1143... ср, 28 дек. 2016 г. в 18:51, Michael Jerris <mike@jerris.com>:
throw me a pr for the spec change and no problem. Why do you think nasm dep will change?
On Wed, Dec 28, 2016 at 8:58 AM Sergey Safarov <s.safarov@gmail.com> wrote:
Hello Bote I tested instuctions simple build and creation freeswitch packages. I made changes to founded issues.
One issue is still exist When you try build release (1.6.13) is requred nasm. This will be fixed when released 1.6.14
And second issue - requred libvpx2-devel. This is must be fixed in master.
Mike could you remove libvpx2-devel dependency from SPEC file in master?
пт, 23 дек. 2016 г. в 1:36, Bote Man <bote_radio@botecomm.com>:
Try her now, Mr. Kyle!
Some obvious dependencies (wget, git) originally listed on the wiki were not found in the freeswitch.spec file so I included them, so along some others there might be some bloat in there.
Also, in the comments section of the old Centos 7 DEPRECATED page Gavin Henry says speexdsp-devel is needed, too. Is that still true?
Bote
*From:* Michael Jerris *Sent:* Thursday, 22 December, 2016 17:10
*To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
don’t need vpx or yuv
On Dec 22, 2016, at 4:48 PM, Bote Man <bote_radio@botecomm.com> wrote:
OK, I’m working on this now.
Is this version syntax recognized by the build system?
BuildRequires: libvpx2-devel *>= 2.0.0*
BuildRequires: libyuv-devel *>= 0.0.1280*
BuildRequires: soundtouch-devel *>= 1.7.1*
I’m pretty sure putting it in the yum install line will break that process so hopefully it will select the right version via yum.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 15:40 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
it would be fine to do the “video_deps_most” … but in the mean time, we just need to right list of deps in the yum install line above the build from source section
On Dec 22, 2016, at 3:36 PM, Bote Man <bote_radio@botecomm.com> wrote:
That might tell me the individual libraries, but Mike wants to build a package of dependencies for one-click installation, if I’m reading him right. Building packages for the FS repo is above my pay grade J
IOW, he wants to get away from dicking around with individual library dependencies the way they are currently listed on the CentOS installation page. But I can’t change the docs to point to an rpm for dependencies until that package exists.
Bote
*From:* Ken Rice *Sent:* Thursday, 22 December, 2016 15:23 *To:* 'FreeSWITCH Docs Team' *Subject:* Re: [Freeswitch-docs] centos7 install instructions
The deps are actually in the spec files… you can pretty easily find them by looking at the BuildRequires in the freeswitch.spec file…
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Bote Man *Sent:* Thursday, December 22, 2016 2:00 PM *To:* 'FreeSWITCH Docs Team' <freeswitch-docs@lists.freeswitch.org> *Subject:* Re: [Freeswitch-docs] centos7 install instructions
At this point I am not certain what to do. The Debian instructions offer a package of only the dependencies, which is perfect.
I don’t see the same thing for CentOS so I don’t know how to replace the list of individual libraries with…what??
So if Mike is OK with Sergey handling this, then I am certainly OK with it.
Bote
*From:* Sergey Safarov *Sent:* Thursday, 22 December, 2016 13:48 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
Bote i can update this instructions. Ping me after one week.
чт, 22 дек. 2016 г. в 21:41, Michael Jerris <mike@jerris.com>:
The source build instructions should tell people to use the packages for the deps.
On Dec 22, 2016, at 1:27 PM, Bote Man <bote_radio@botecomm.com> wrote:
Can I poke around Stash to find out the component libraries that go into the packages and list them individually for the source build instructions where they are missing? I’ve never drilled down like that so don’t know how to proceed.
Once I know where to look I can piece things together, but I definitely need guidance.
Thanks.
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Michael Jerris *Sent:* Thursday, 22 December, 2016 13:15 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of* Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________
Freeswitch-docs mailing list
Freeswitch-docs@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
Please look at FS-9063 <https://freeswitch.org/jira/browse/FS-9063> and PR #3 <https://freeswitch.org/stash/projects/SD/repos/libg7221/pull-requests/3> and #7 <https://freeswitch.org/stash/projects/SD/repos/freeswitch-video-deps/pull-requests/7/diff> This PR is still open for long time. чт, 22 дек. 2016 г. в 21:15, Michael Jerris <mike@jerris.com>:
no, the default instructions should get people to install those from packages. That needs to be fixed first, additional instructions how to build those from source and to build those packages is also useful but should be down below in a super manual build section.
On Dec 22, 2016, at 1:11 PM, Bote Man <bote_radio@botecomm.com> wrote:
Should I update the CentOS wiki page with Sergey’s instructions or wait until his pull requests are incorporated into the build system?
Bote
*From:* freeswitch-docs-bounces@lists.freeswitch.org [ mailto:freeswitch-docs-bounces@lists.freeswitch.org <freeswitch-docs-bounces@lists.freeswitch.org>] *On Behalf Of *Sergey Safarov *Sent:* Thursday, 22 December, 2016 12:57 *To:* FreeSWITCH Docs Team *Subject:* Re: [Freeswitch-docs] centos7 install instructions
I have created manual to build all dependences from scratch.
https://freeswitch.org/confluence/display/FREESWITCH/Creating+RPM+repository
Also i has several open pull requests for this instructions.
чт, 22 дек. 2016 г. в 20:14, Bote Man <bote_radio@botecomm.com>:
Quite probable. I found a few dependencies missing from the Debian source build instructions and added the individual ones…before I got the “ freeswitch-video-deps-most” to take on my end.
How does one go about figuring out the dependencies for a particular build?
Would it be better to provide a package of dependencies similar to the one above for Debian?
--- Bote FreeSWITCH Docs Janitor http://freeswitch.org/confluence
*From:* freeswitch-docs-bounces@lists.freeswitch.org [mailto: freeswitch-docs-bounces@lists.freeswitch.org] *On Behalf Of *Michael Jerris *Sent:* Thursday, 22 December, 2016 12:06 *To:* FreeSWITCH Docs Team *Subject:* [Freeswitch-docs] centos7 install instructions
https://freeswitch.org/confluence/display/FREESWITCH/CentOS+7+and+RHEL+7
looks like quite a lot of packages to install are missing from the build from source section… for sure flite but all the codec libs that come from our repo and any others not listed that must be installed from our cent repo _______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
_______________________________________________ Freeswitch-docs mailing list Freeswitch-docs@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-docs
participants (4)
-
Bote Man
-
Ken Rice
-
Michael Jerris
-
Sergey Safarov