error events for failed calls using 'conference conf_name bgdial sofia/ip/user'
My goals are: 1) To get “start-talking” and “stop-talking” events during Early Media (before the call is answered) as well as after the call is answered. 2) If there are problems with the call, get events that tell me why the call failed. The way I am doing it accomplishes the start/stop talking (in early media) BUT if the call fails, I do not get events back letting me know it failed and why. I DO get CHANNEL_DESTROY and CHANNEL_STATE events that IF I had the UUID, I could match against, but at this point in the call I do NOT have that UUID AND when setting the UUID via “origination_uuid=my_uuid_my_uuid_my_test_uuid”, my UUID has not yet been set, so as far as I can tell there is no way to match those events with details my application has at the time. The console shows the errors (Below are two examples of calls that failed in I entered “bad” sofia locations), but they do not come back as events. 2010-03-05 14:52:20.109497 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [USER_NOT_REGISTERED] 2010-03-05 16:34:13.669509 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [DESTINATION_OUT_OF_ORDER] So … I am wondering is there a better/different way to do it, is there a work-around, should I get events to tell me the dial had problems, etc. I am using esl/lua and esl/java to experiment with this. Both get the same results (as I would expect). I have had this as a ~take-a-number on IRC for about a week, so I thought I would add more detail and open it up to this group. I realize many of the same people do both, but hoped more eyes may look at it here and give thoughts. ===== From Pastebin ==== I am not getting 'error' events in ESL [that match a UUID I can track] when there is a problem with conference <conf_name> dial sofia/myip/1006, so I can not tell what went wrong. Is there a work-around? I start a call in a conference from ESL (conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.232/1006) If the 'dial' works (meaning does not get an error) then I get the events I want and expect. If it errors (not able to make the call ( [USER_NOT_REGISTERED] | [DESTINATION_OUT_OF_ORDER] | etc. ) then I do not get any events that tell me something went wrong. Is there a work-around for this? ===================== LUA Code run from ./freeswitch.trunk/libs/esl/lua #!/usr/local/bin/lua require("ESL") myip = "10.50.48.239" -- change this to your IP address myExt = 1006 -- change to one that is registered, then rerun with an unregistered con = ESL.ESLconnection("localhost", "8021", "ClueCon"); str = string.format("conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/%s/%s", myip, myExt) con:sendRecv("event plain ALL") ff = con:api( str ) print("** sent " .. str ) print( (ff and ff:getBody() or "no body" )) cnt = 0 while cnt <= 30 do print("loop = " .. cnt ) cnt = cnt + 1 ev = con:recvEventTimed(1000) print( ev and ev:serialize("plain") or "no event this time" ) end ============== The printout is : ** sent conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.239/1006 OK Job-UUID: a5d57b34-9205-483c-ae64-60601d8178d7 loop = 0 Event-Name: CHANNEL_DESTROY Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_core_session.c Event-Calling-Function: switch_core_session_perform_destroy Event-Calling-Line-Number: 1051 Channel-State: CS_NEW Channel-State-Number: 0 Channel-Name: N/A Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing loop = 1 Event-Name: CHANNEL_STATE Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_channel.c Event-Calling-Function: switch_channel_perform_set_running_state Event-Calling-Line-Number: 1301 Channel-State: CS_DESTROY Channel-State-Number: 12 Channel-Name: _undef_ Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing loop = 2 Event-Name: API Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_loadable_module.c Event-Calling-Function: switch_api_execute Event-Calling-Line-Number: 1581 API-Command: conference API-Command-Argument: conf_uuid-TEST_CONF%20bgdial%20%5Borigination_uuid%3Dmy_uuid_my_uuid_my_test_uuid%5Dsofia/10.50.48.239/1006%20 loop = 3 no event this time loop = 4
http://wiki.freeswitch.org/wiki/Dialplan_XML#SIP-Specific_Dialstrings Please read that there is no such thing as sofia/ip/user (unless the ip is an alias on the profile) /b On Mar 10, 2010, at 11:23 AM, Gledhill, James wrote:
My goals are: 1) To get “start-talking” and “stop-talking” events during Early Media (before the call is answered) as well as after the call is answered. 2) If there are problems with the call, get events that tell me why the call failed.
The way I am doing it accomplishes the start/stop talking (in early media) BUT if the call fails, I do not get events back letting me know it failed and why. I DO get CHANNEL_DESTROY and CHANNEL_STATE events that IF I had the UUID, I could match against, but at this point in the call I do NOT have that UUID AND when setting the UUID via “origination_uuid=my_uuid_my_uuid_my_test_uuid”, my UUID has not yet been set, so as far as I can tell there is no way to match those events with details my application has at the time.
The console shows the errors (Below are two examples of calls that failed in I entered “bad” sofia locations), but they do not come back as events. 2010-03-05 14:52:20.109497 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [USER_NOT_REGISTERED] 2010-03-05 16:34:13.669509 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [DESTINATION_OUT_OF_ORDER]
So … I am wondering is there a better/different way to do it, is there a work-around, should I get events to tell me the dial had problems, etc.
I am using esl/lua and esl/java to experiment with this. Both get the same results (as I would expect).
I have had this as a ~take-a-number on IRC for about a week, so I thought I would add more detail and open it up to this group. I realize many of the same people do both, but hoped more eyes may look at it here and give thoughts.
===== From Pastebin ====
I am not getting 'error' events in ESL [that match a UUID I can track] when there is a problem with conference <conf_name> dial sofia/myip/1006, so I can not tell what went wrong. Is there a work-around?
I start a call in a conference from ESL (conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.232/1006)
If the 'dial' works (meaning does not get an error) then I get the events I want and expect. If it errors (not able to make the call ( [USER_NOT_REGISTERED] | [DESTINATION_OUT_OF_ORDER] | etc. ) then I do not get any events that tell me something went wrong.
Is there a work-around for this?
===================== LUA Code run from ./freeswitch.trunk/libs/esl/lua
#!/usr/local/bin/lua require("ESL")
myip = "10.50.48.239" -- change this to your IP address myExt = 1006 -- change to one that is registered, then rerun with an unregistered
con = ESL.ESLconnection("localhost", "8021", "ClueCon");
str = string.format("conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/%s/%s", myip, myExt)
con:sendRecv("event plain ALL")
ff = con:api( str )
print("** sent " .. str )
print( (ff and ff:getBody() or "no body" ))
cnt = 0 while cnt <= 30 do
print("loop = " .. cnt ) cnt = cnt + 1 ev = con:recvEventTimed(1000) print( ev and ev:serialize("plain") or "no event this time" )
end
==============
The printout is :
** sent conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.239/1006 OK Job-UUID: a5d57b34-9205-483c-ae64-60601d8178d7
loop = 0 Event-Name: CHANNEL_DESTROY Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_core_session.c Event-Calling-Function: switch_core_session_perform_destroy Event-Calling-Line-Number: 1051 Channel-State: CS_NEW Channel-State-Number: 0 Channel-Name: N/A Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing
loop = 1 Event-Name: CHANNEL_STATE Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_channel.c Event-Calling-Function: switch_channel_perform_set_running_state Event-Calling-Line-Number: 1301 Channel-State: CS_DESTROY Channel-State-Number: 12 Channel-Name: _undef_ Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing
loop = 2 Event-Name: API Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_loadable_module.c Event-Calling-Function: switch_api_execute Event-Calling-Line-Number: 1581 API-Command: conference API-Command-Argument: conf_uuid-TEST_CONF%20bgdial%20%5Borigination_uuid%3Dmy_uuid_my_uuid_my_test_uuid%5Dsofia/10.50.48.239/1006%20
loop = 3 no event this time loop = 4 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
consider api originate <dialstring> conference conf_uuid-TEST_CONF inline this returns success+uuid or fail On Wed, Mar 10, 2010 at 12:04 PM, Brian West <brian@freeswitch.org> wrote:
http://wiki.freeswitch.org/wiki/Dialplan_XML#SIP-Specific_Dialstrings
Please read that there is no such thing as sofia/ip/user (unless the ip is an alias on the profile)
/b
On Mar 10, 2010, at 11:23 AM, Gledhill, James wrote:
My goals are:
1) To get “start-talking” and “stop-talking” events during Early Media (before the call is answered) as well as after the call is answered.
2) If there are problems with the call, get events that tell me why the call failed.
The way I am doing it accomplishes the start/stop talking (in early media) BUT if the call fails, I do not get events back letting me know it failed and why. I DO get CHANNEL_DESTROY and CHANNEL_STATE events that IF I had the UUID, I could match against, but at this point in the call I do NOT have that UUID AND when setting the UUID via “origination_uuid=my_uuid_my_uuid_my_test_uuid”, my UUID has not yet been set, so as far as I can tell there is no way to match those events with details my application has at the time.
The console shows the errors (Below are two examples of calls that failed in I entered “bad” sofia locations), but they do not come back as events.
2010-03-05 14:52:20.109497 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [USER_NOT_REGISTERED]
2010-03-05 16:34:13.669509 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [DESTINATION_OUT_OF_ORDER]
So … I am wondering is there a better/different way to do it, is there a work-around, should I get events to tell me the dial had problems, etc.
I am using esl/lua and esl/java to experiment with this. Both get the same results (as I would expect).
I have had this as a ~take-a-number on IRC for about a week, so I thought I would add more detail and open it up to this group. I realize many of the same people do both, but hoped more eyes may look at it here and give thoughts.
===== From Pastebin ====
I am not getting 'error' events in ESL [that match a UUID I can track] when there is a problem with conference <conf_name> dial sofia/myip/1006, so I can not tell what went wrong. Is there a work-around?
I start a call in a conference from ESL (conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/ 10.50.48.232/1006)
If the 'dial' works (meaning does not get an error) then I get the events I want and expect. If it errors (not able to make the call ( [USER_NOT_REGISTERED] | [DESTINATION_OUT_OF_ORDER] | etc. ) then I do not get any events that tell me something went wrong.
Is there a work-around for this?
=====================
LUA Code run from ./freeswitch.trunk/libs/esl/lua
#!/usr/local/bin/lua
require("ESL")
myip = "10.50.48.239" -- change this to your IP address
myExt = 1006 -- change to one that is registered, then rerun with an unregistered
con = ESL.ESLconnection("localhost", "8021", "ClueCon");
str = string.format("conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/%s/%s", myip, myExt)
con:sendRecv("event plain ALL")
ff = con:api( str )
print("** sent " .. str )
print( (ff and ff:getBody() or "no body" ))
cnt = 0
while cnt <= 30 do
print("loop = " .. cnt )
cnt = cnt + 1
ev = con:recvEventTimed(1000)
print( ev and ev:serialize("plain") or "no event this time" )
end
==============
The printout is :
** sent conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.239/1006
OK Job-UUID: a5d57b34-9205-483c-ae64-60601d8178d7
loop = 0
Event-Name: CHANNEL_DESTROY
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_core_session.c
Event-Calling-Function: switch_core_session_perform_destroy
Event-Calling-Line-Number: 1051
Channel-State: CS_NEW
Channel-State-Number: 0
Channel-Name: N/A
Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66
Call-Direction: outbound
Presence-Call-Direction: outbound
Answer-State: ringing
loop = 1
Event-Name: CHANNEL_STATE
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_channel.c
Event-Calling-Function: switch_channel_perform_set_running_state
Event-Calling-Line-Number: 1301
Channel-State: CS_DESTROY
Channel-State-Number: 12
Channel-Name: _undef_
Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66
Call-Direction: outbound
Presence-Call-Direction: outbound
Answer-State: ringing
loop = 2
Event-Name: API
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_loadable_module.c
Event-Calling-Function: switch_api_execute
Event-Calling-Line-Number: 1581
API-Command: conference
API-Command-Argument: conf_uuid-TEST_CONF%20bgdial%20%5Borigination_uuid%3Dmy_uuid_my_uuid_my_test_uuid%5Dsofia/ 10.50.48.239/1006%20
loop = 3
no event this time
loop = 4 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
Anthony - The problem with api originate <dialstring> conference conf_uuid-TEST_CONF inline is that it does not return until after the call is answered - so I do not have events during early media. I did try to add {ignore_early_media=true} but it still did not return until after I answered the phone (using esl lua for this test) I also tried "bgapi originate {ignore_early_media=true,origination_uuid=my_uuid_my_uuid_my_test_uuid}s ofia/internal/+18015551212@10.50.40.50:5060 &conference(conf_uuid-TEST_CONF) inline", (I used a different TN, but changed it for privacy) which makes the call and returns events before I answer the call, BUT the conf bridge does not get involved (called) until AFTER the origination call is answered. Neither of these allows me to get "start-talking" and "stop-talking" events during Early Media from the conf bridge because the conference is not involved during the early media part of the call. Brian - I should have been more detailed in my sofia string in the subject. I am aware that sofia/ip/user is not valid. Two examples sofia string I use are below. * If I used sofia/10.50.48.222/1002 AND that user is registered and answers, then all works well. If that user is not registered, I need to get USER_NOT_REGISTERED * If I use sofia/internal/+18015@10.50.40.50 (which is not a valid E.164 TN) then I should get DESTINATION_OUT_OF_ORDER or some other error message. ________________________________ From: freeswitch-dev-bounces@lists.freeswitch.org [mailto:freeswitch-dev-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Wednesday, March 10, 2010 12:16 PM To: freeswitch-dev@lists.freeswitch.org Subject: Re: [Freeswitch-dev] error events for failed calls using'conference conf_name bgdial sofia/ip/user' consider api originate <dialstring> conference conf_uuid-TEST_CONF inline this returns success+uuid or fail On Wed, Mar 10, 2010 at 12:04 PM, Brian West <brian@freeswitch.org> wrote: http://wiki.freeswitch.org/wiki/Dialplan_XML#SIP-Specific_Dialstrings Please read that there is no such thing as sofia/ip/user (unless the ip is an alias on the profile) /b On Mar 10, 2010, at 11:23 AM, Gledhill, James wrote: My goals are: 1) To get "start-talking" and "stop-talking" events during Early Media (before the call is answered) as well as after the call is answered. 2) If there are problems with the call, get events that tell me why the call failed. The way I am doing it accomplishes the start/stop talking (in early media) BUT if the call fails, I do not get events back letting me know it failed and why. I DO get CHANNEL_DESTROY and CHANNEL_STATE events that IF I had the UUID, I could match against, but at this point in the call I do NOT have that UUID AND when setting the UUID via "origination_uuid=my_uuid_my_uuid_my_test_uuid", my UUID has not yet been set, so as far as I can tell there is no way to match those events with details my application has at the time. The console shows the errors (Below are two examples of calls that failed in I entered "bad" sofia locations), but they do not come back as events. 2010-03-05 14:52:20.109497 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [USER_NOT_REGISTERED] 2010-03-05 16:34:13.669509 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [DESTINATION_OUT_OF_ORDER] So ... I am wondering is there a better/different way to do it, is there a work-around, should I get events to tell me the dial had problems, etc. I am using esl/lua and esl/java to experiment with this. Both get the same results (as I would expect). I have had this as a ~take-a-number on IRC for about a week, so I thought I would add more detail and open it up to this group. I realize many of the same people do both, but hoped more eyes may look at it here and give thoughts. ===== From Pastebin ==== I am not getting 'error' events in ESL [that match a UUID I can track] when there is a problem with conference <conf_name> dial sofia/myip/1006, so I can not tell what went wrong. Is there a work-around? I start a call in a conference from ESL (conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.232/1006) If the 'dial' works (meaning does not get an error) then I get the events I want and expect. If it errors (not able to make the call ( [USER_NOT_REGISTERED] | [DESTINATION_OUT_OF_ORDER] | etc. ) then I do not get any events that tell me something went wrong. Is there a work-around for this? ===================== LUA Code run from ./freeswitch.trunk/libs/esl/lua #!/usr/local/bin/lua require("ESL") myip = "10.50.48.239" -- change this to your IP address myExt = 1006 -- change to one that is registered, then rerun with an unregistered con = ESL.ESLconnection("localhost", "8021", "ClueCon"); str = string.format("conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/%s/%s", myip, myExt) con:sendRecv("event plain ALL") ff = con:api( str ) print("** sent " .. str ) print( (ff and ff:getBody() or "no body" )) cnt = 0 while cnt <= 30 do print("loop = " .. cnt ) cnt = cnt + 1 ev = con:recvEventTimed(1000) print( ev and ev:serialize("plain") or "no event this time" ) end ============== The printout is : ** sent conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.239/1006 OK Job-UUID: a5d57b34-9205-483c-ae64-60601d8178d7 loop = 0 Event-Name: CHANNEL_DESTROY Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_core_session.c Event-Calling-Function: switch_core_session_perform_destroy Event-Calling-Line-Number: 1051 Channel-State: CS_NEW Channel-State-Number: 0 Channel-Name: N/A Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing loop = 1 Event-Name: CHANNEL_STATE Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_channel.c Event-Calling-Function: switch_channel_perform_set_running_state Event-Calling-Line-Number: 1301 Channel-State: CS_DESTROY Channel-State-Number: 12 Channel-Name: _undef_ Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing loop = 2 Event-Name: API Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_loadable_module.c Event-Calling-Function: switch_api_execute Event-Calling-Line-Number: 1581 API-Command: conference API-Command-Argument: conf_uuid-TEST_CONF%20bgdial%20%5Borigination_uuid%3Dmy_uuid_my_uuid_my_ test_uuid%5Dsofia/10.50.48.239/1006%20 loop = 3 no event this time loop = 4 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
Some of your findings are incorrect. The default behavior of originate is to return as soon as there is early media. (sip 183) Adding ignore_early_media=true is the opposite effect so you do not want that. bgapi just does the command in a separate thread so you don't want that either. *api originate <dialstring> conference conf_uuid-TEST_CONF inline* will put the call in the conference the very instant it sees a 183 If you see anything other than this, make sure you are on latest trunk and do a console trace demonstrating otherwise. use these commands for more details. console loglevel debug sofia profile internal siptrace on On Wed, Mar 10, 2010 at 1:29 PM, Gledhill, James < james.gledhill@sipstorm.com> wrote:
Anthony –
The problem with *api originate <dialstring> conference conf_uuid-TEST_CONF inline* is that it does not return until after the call is answered – so I do not have events during early media. I did try to add *{ignore_early_media=true}* but it still did not return until after I answered the phone (using esl lua for this test)
I also tried "*bgapi originate {ignore_early_media=true,origination_uuid=my_uuid_my_uuid_my_test_uuid}sofia/internal/+ 18015551212@10.50.40.50:5060 &conference(conf_uuid-TEST_CONF) inline*”, (I used a different TN, but changed it for privacy) which makes the call and returns events before I answer the call, BUT the conf bridge does not get involved (called) until AFTER the origination call is answered.
Neither of these allows me to get “start-talking” and “stop-talking” events during Early Media from the conf bridge because the conference is not involved during the early media part of the call.
Brian –
I should have been more detailed in my sofia string in the subject. I am aware that sofia/ip/user is not valid. Two examples sofia string I use are below.**
* If I used sofia/10.50.48.222/1002 AND that user is registered and answers, then all works well. If that user is not registered, I need to get USER_NOT_REGISTERED
* If I use sofia/internal/+18015@10.50.40.50 (which is not a valid E.164 TN) then I should get DESTINATION_OUT_OF_ORDER or some other error message.
------------------------------
*From:* freeswitch-dev-bounces@lists.freeswitch.org [mailto: freeswitch-dev-bounces@lists.freeswitch.org] *On Behalf Of *Anthony Minessale *Sent:* Wednesday, March 10, 2010 12:16 PM *To:* freeswitch-dev@lists.freeswitch.org *Subject:* Re: [Freeswitch-dev] error events for failed calls using'conference conf_name bgdial sofia/ip/user'
consider
api originate <dialstring> conference conf_uuid-TEST_CONF inline
this returns success+uuid or fail
On Wed, Mar 10, 2010 at 12:04 PM, Brian West <brian@freeswitch.org> wrote:
http://wiki.freeswitch.org/wiki/Dialplan_XML#SIP-Specific_Dialstrings
Please read that there is no such thing as sofia/ip/user (unless the ip is an alias on the profile)
/b
On Mar 10, 2010, at 11:23 AM, Gledhill, James wrote:
My goals are:
1) To get “start-talking” and “stop-talking” events during Early Media (before the call is answered) as well as after the call is answered.
2) If there are problems with the call, get events that tell me why the call failed.
The way I am doing it accomplishes the start/stop talking (in early media) BUT if the call fails, I do not get events back letting me know it failed and why. I DO get CHANNEL_DESTROY and CHANNEL_STATE events that IF I had the UUID, I could match against, but at this point in the call I do NOT have that UUID AND when setting the UUID via “origination_uuid=my_uuid_my_uuid_my_test_uuid”, my UUID has not yet been set, so as far as I can tell there is no way to match those events with details my application has at the time.
The console shows the errors (Below are two examples of calls that failed in I entered “bad” sofia locations), but they do not come back as events.
2010-03-05 14:52:20.109497 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [USER_NOT_REGISTERED]
2010-03-05 16:34:13.669509 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [DESTINATION_OUT_OF_ORDER]
So … I am wondering is there a better/different way to do it, is there a work-around, should I get events to tell me the dial had problems, etc.
I am using esl/lua and esl/java to experiment with this. Both get the same results (as I would expect).
I have had this as a ~take-a-number on IRC for about a week, so I thought I would add more detail and open it up to this group. I realize many of the same people do both, but hoped more eyes may look at it here and give thoughts.
===== From Pastebin ====
I am not getting 'error' events in ESL [that match a UUID I can track] when there is a problem with conference <conf_name> dial sofia/myip/1006, so I can not tell what went wrong. Is there a work-around?
I start a call in a conference from ESL (conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/ 10.50.48.232/1006)
If the 'dial' works (meaning does not get an error) then I get the events I want and expect. If it errors (not able to make the call ( [USER_NOT_REGISTERED] | [DESTINATION_OUT_OF_ORDER] | etc. ) then I do not get any events that tell me something went wrong.
Is there a work-around for this?
=====================
LUA Code run from ./freeswitch.trunk/libs/esl/lua
#!/usr/local/bin/lua
require("ESL")
myip = "10.50.48.239" -- change this to your IP address
myExt = 1006 -- change to one that is registered, then rerun with an unregistered
con = ESL.ESLconnection("localhost", "8021", "ClueCon");
str = string.format("conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/%s/%s", myip, myExt)
con:sendRecv("event plain ALL")
ff = con:api( str )
print("** sent " .. str )
print( (ff and ff:getBody() or "no body" ))
cnt = 0
while cnt <= 30 do
print("loop = " .. cnt )
cnt = cnt + 1
ev = con:recvEventTimed(1000)
print( ev and ev:serialize("plain") or "no event this time" )
end
==============
The printout is :
** sent conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.239/1006
OK Job-UUID: a5d57b34-9205-483c-ae64-60601d8178d7
loop = 0
Event-Name: CHANNEL_DESTROY
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_core_session.c
Event-Calling-Function: switch_core_session_perform_destroy
Event-Calling-Line-Number: 1051
Channel-State: CS_NEW
Channel-State-Number: 0
Channel-Name: N/A
Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66
Call-Direction: outbound
Presence-Call-Direction: outbound
Answer-State: ringing
loop = 1
Event-Name: CHANNEL_STATE
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_channel.c
Event-Calling-Function: switch_channel_perform_set_running_state
Event-Calling-Line-Number: 1301
Channel-State: CS_DESTROY
Channel-State-Number: 12
Channel-Name: _undef_
Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66
Call-Direction: outbound
Presence-Call-Direction: outbound
Answer-State: ringing
loop = 2
Event-Name: API
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_loadable_module.c
Event-Calling-Function: switch_api_execute
Event-Calling-Line-Number: 1581
API-Command: conference
API-Command-Argument: conf_uuid-TEST_CONF%20bgdial%20%5Borigination_uuid%3Dmy_uuid_my_uuid_my_test_uuid%5Dsofia/ 10.50.48.239/1006%20
loop = 3
no event this time
loop = 4
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
Thanks Anthony - I got it to work with the following: FS Version : 16852 and later 16963M "api originate sofia/10.50.48.232/+{my_tn_here}@10.50.50.50:5060 &conference(conf_uuid-TEST_CON) inline" If I used api originate <dialstring> conference conf_uuid-TEST_CONF inline then FS tried to make a conference of conf_uuid-TEST_CON@inline .. using &conference(conf_uuid-TEST_CON) inline fixed that 2010-03-10 17:03:36.463558 [NOTICE] switch_ivr.c:1447 Transfer sofia/internal/+{my_tn}@{my_gw} to conf_uuid-TEST_CON[conference@inline] 2010-03-10 17:03:36.465638 [DEBUG] switch_core_state_machine.c:133 No Dialplan, changing state to CONSUME_MEDIA --------- For others that may look at this later, my test code to get "start-talking" and "stop-talking" events during Early Media using esl lua (freesiwtch_src/libs/esl/lua) is #!/usr/local/bin/lua require("ESL") local con = ESL.ESLconnection("localhost", "8021", "ClueCon"); con:sendRecv("event plain ALL") ob_session_string = string.format("originate sofia/internal/{MY_TN_NUMBER_HERE}@{MY_GATEWAY_HERE} &conference(conf_uuid-TEST_CON) inline") ff = con:api( ob_session_string ) print("** sent api") if ff then print(ff:getBody()) print(ff: getHeader("result")) else print("no body") end cnt = 0 while cnt <= 40 do print("loop = " .. cnt ) cnt = cnt + 1 ev = con:recvEventTimed(1000) print( ev and ev:serialize("plain") or "no event this time" ) end ________________________________ From: freeswitch-dev-bounces@lists.freeswitch.org [mailto:freeswitch-dev-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Wednesday, March 10, 2010 2:36 PM To: freeswitch-dev@lists.freeswitch.org Subject: Re: [Freeswitch-dev] error events for failed calls using'conferenceconf_name bgdial sofia/ip/user' Some of your findings are incorrect. The default behavior of originate is to return as soon as there is early media. (sip 183) Adding ignore_early_media=true is the opposite effect so you do not want that. bgapi just does the command in a separate thread so you don't want that either. api originate <dialstring> conference conf_uuid-TEST_CONF inline will put the call in the conference the very instant it sees a 183 If you see anything other than this, make sure you are on latest trunk and do a console trace demonstrating otherwise. use these commands for more details. console loglevel debug sofia profile internal siptrace on On Wed, Mar 10, 2010 at 1:29 PM, Gledhill, James <james.gledhill@sipstorm.com> wrote: Anthony - The problem with api originate <dialstring> conference conf_uuid-TEST_CONF inline is that it does not return until after the call is answered - so I do not have events during early media. I did try to add {ignore_early_media=true} but it still did not return until after I answered the phone (using esl lua for this test) I also tried "bgapi originate {ignore_early_media=true,origination_uuid=my_uuid_my_uuid_my_test_uuid}s ofia/internal/+18015551212@10.50.40.50:5060 &conference(conf_uuid-TEST_CONF) inline", (I used a different TN, but changed it for privacy) which makes the call and returns events before I answer the call, BUT the conf bridge does not get involved (called) until AFTER the origination call is answered. Neither of these allows me to get "start-talking" and "stop-talking" events during Early Media from the conf bridge because the conference is not involved during the early media part of the call. Brian - I should have been more detailed in my sofia string in the subject. I am aware that sofia/ip/user is not valid. Two examples sofia string I use are below. * If I used sofia/10.50.48.222/1002 AND that user is registered and answers, then all works well. If that user is not registered, I need to get USER_NOT_REGISTERED * If I use sofia/internal/+18015@10.50.40.50 (which is not a valid E.164 TN) then I should get DESTINATION_OUT_OF_ORDER or some other error message. ________________________________ From: freeswitch-dev-bounces@lists.freeswitch.org [mailto:freeswitch-dev-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale Sent: Wednesday, March 10, 2010 12:16 PM To: freeswitch-dev@lists.freeswitch.org Subject: Re: [Freeswitch-dev] error events for failed calls using'conference conf_name bgdial sofia/ip/user' consider api originate <dialstring> conference conf_uuid-TEST_CONF inline this returns success+uuid or fail On Wed, Mar 10, 2010 at 12:04 PM, Brian West <brian@freeswitch.org> wrote: http://wiki.freeswitch.org/wiki/Dialplan_XML#SIP-Specific_Dialstrings Please read that there is no such thing as sofia/ip/user (unless the ip is an alias on the profile) /b On Mar 10, 2010, at 11:23 AM, Gledhill, James wrote: My goals are: 1) To get "start-talking" and "stop-talking" events during Early Media (before the call is answered) as well as after the call is answered. 2) If there are problems with the call, get events that tell me why the call failed. The way I am doing it accomplishes the start/stop talking (in early media) BUT if the call fails, I do not get events back letting me know it failed and why. I DO get CHANNEL_DESTROY and CHANNEL_STATE events that IF I had the UUID, I could match against, but at this point in the call I do NOT have that UUID AND when setting the UUID via "origination_uuid=my_uuid_my_uuid_my_test_uuid", my UUID has not yet been set, so as far as I can tell there is no way to match those events with details my application has at the time. The console shows the errors (Below are two examples of calls that failed in I entered "bad" sofia locations), but they do not come back as events. 2010-03-05 14:52:20.109497 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [USER_NOT_REGISTERED] 2010-03-05 16:34:13.669509 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [DESTINATION_OUT_OF_ORDER] So ... I am wondering is there a better/different way to do it, is there a work-around, should I get events to tell me the dial had problems, etc. I am using esl/lua and esl/java to experiment with this. Both get the same results (as I would expect). I have had this as a ~take-a-number on IRC for about a week, so I thought I would add more detail and open it up to this group. I realize many of the same people do both, but hoped more eyes may look at it here and give thoughts. ===== From Pastebin ==== I am not getting 'error' events in ESL [that match a UUID I can track] when there is a problem with conference <conf_name> dial sofia/myip/1006, so I can not tell what went wrong. Is there a work-around? I start a call in a conference from ESL (conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.232/1006) If the 'dial' works (meaning does not get an error) then I get the events I want and expect. If it errors (not able to make the call ( [USER_NOT_REGISTERED] | [DESTINATION_OUT_OF_ORDER] | etc. ) then I do not get any events that tell me something went wrong. Is there a work-around for this? ===================== LUA Code run from ./freeswitch.trunk/libs/esl/lua #!/usr/local/bin/lua require("ESL") myip = "10.50.48.239" -- change this to your IP address myExt = 1006 -- change to one that is registered, then rerun with an unregistered con = ESL.ESLconnection("localhost", "8021", "ClueCon"); str = string.format("conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/%s/%s", myip, myExt) con:sendRecv("event plain ALL") ff = con:api( str ) print("** sent " .. str ) print( (ff and ff:getBody() or "no body" )) cnt = 0 while cnt <= 30 do print("loop = " .. cnt ) cnt = cnt + 1 ev = con:recvEventTimed(1000) print( ev and ev:serialize("plain") or "no event this time" ) end ============== The printout is : ** sent conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.239/1006 OK Job-UUID: a5d57b34-9205-483c-ae64-60601d8178d7 loop = 0 Event-Name: CHANNEL_DESTROY Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_core_session.c Event-Calling-Function: switch_core_session_perform_destroy Event-Calling-Line-Number: 1051 Channel-State: CS_NEW Channel-State-Number: 0 Channel-Name: N/A Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing loop = 1 Event-Name: CHANNEL_STATE Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_channel.c Event-Calling-Function: switch_channel_perform_set_running_state Event-Calling-Line-Number: 1301 Channel-State: CS_DESTROY Channel-State-Number: 12 Channel-Name: _undef_ Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66 Call-Direction: outbound Presence-Call-Direction: outbound Answer-State: ringing loop = 2 Event-Name: API Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1 FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com FreeSWITCH-IPv4: 10.50.48.232 FreeSWITCH-IPv6: %3A%3A1 Event-Date-Local: 2010-03-05%2017%3A06%3A52 Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT Event-Date-Timestamp: 1267826812571550 Event-Calling-File: switch_loadable_module.c Event-Calling-Function: switch_api_execute Event-Calling-Line-Number: 1581 API-Command: conference API-Command-Argument: conf_uuid-TEST_CONF%20bgdial%20%5Borigination_uuid%3Dmy_uuid_my_uuid_my_ test_uuid%5Dsofia/10.50.48.239/1006%20 loop = 3 no event this time loop = 4 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org -- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
&app(arg) removes the requirement for "inline" inline is a special dialplan that uses a list of apps as the extension input I think I made a typo in my example *api originate <dialstring> conference:conf_uuid-TEST_CONF inline* the app args should be connected to the app name with a : char when using the inline dp The 2 inputs to originate following the dialstring are &app(args) OR <extension> <dialplan> <context> so conference:foo inline is equiv to &conference(foo) On Wed, Mar 10, 2010 at 4:38 PM, Gledhill, James < james.gledhill@sipstorm.com> wrote:
Thanks Anthony –
I got it to work with the following:
FS Version : 16852 and later 16963M
"api originate sofia/10.50.48.232/+{my_tn_here}@10.50.50.50:5060 &conference(conf_uuid-TEST_CON)<http://10.50.48.232/+%7Bmy_tn_here%7D%4010.50.50.50%3A5060&conference%28conf_uuid-TEST_CON%29>inline"
If I used *api originate <dialstring> conference conf_uuid-TEST_CONF inline* then FS tried to make a conference of conf_uuid-TEST_CON*@inline*.. using &conference(conf_uuid-TEST_CON) inline fixed that
2010-03-10 17:03:36.463558 [NOTICE] switch_ivr.c:1447 Transfer sofia/internal/+{my_tn}@{my_gw} to conf_uuid-TEST_CON[conference@inline]
2010-03-10 17:03:36.465638 [DEBUG] switch_core_state_machine.c:133 No Dialplan, changing state to CONSUME_MEDIA
---------
For others that may look at this later, my test code to get “start-talking” and “stop-talking” events during Early Media using esl lua (freesiwtch_src/libs/esl/lua) is
#!/usr/local/bin/lua
require("ESL")
local con = ESL.ESLconnection("localhost", "8021", "ClueCon");
con:sendRecv("event plain ALL")
ob_session_string = string.format("originate sofia/internal/{MY_TN_NUMBER_HERE}@{MY_GATEWAY_HERE} &conference(conf_uuid-TEST_CON) inline")
ff = con:api( ob_session_string )
print("** sent api")
if ff then
print(ff:getBody())
print(ff: getHeader("result"))
else
print("no body")
end
cnt = 0
while cnt <= 40 do
print("loop = " .. cnt )
cnt = cnt + 1
ev = con:recvEventTimed(1000)
print( ev and ev:serialize("plain") or "no event this time" )
end ------------------------------
*From:* freeswitch-dev-bounces@lists.freeswitch.org [mailto: freeswitch-dev-bounces@lists.freeswitch.org] *On Behalf Of *Anthony Minessale *Sent:* Wednesday, March 10, 2010 2:36 PM
*To:* freeswitch-dev@lists.freeswitch.org *Subject:* Re: [Freeswitch-dev] error events for failed calls using'conferenceconf_name bgdial sofia/ip/user'
Some of your findings are incorrect.
The default behavior of originate is to return as soon as there is early media. (sip 183) Adding ignore_early_media=true is the opposite effect so you do not want that.
bgapi just does the command in a separate thread so you don't want that either.
*api originate <dialstring> conference conf_uuid-TEST_CONF inline* will put the call in the conference the very instant it sees a 183
If you see anything other than this, make sure you are on latest trunk and do a console trace demonstrating otherwise.
use these commands for more details.
console loglevel debug sofia profile internal siptrace on
On Wed, Mar 10, 2010 at 1:29 PM, Gledhill, James < james.gledhill@sipstorm.com> wrote:
Anthony –
The problem with *api originate <dialstring> conference conf_uuid-TEST_CONF inline* is that it does not return until after the call is answered – so I do not have events during early media. I did try to add *{ignore_early_media=true}* but it still did not return until after I answered the phone (using esl lua for this test)
I also tried "*bgapi originate {ignore_early_media=true,origination_uuid=my_uuid_my_uuid_my_test_uuid}sofia/internal/+ 18015551212@10.50.40.50:5060 &conference(conf_uuid-TEST_CONF) inline*”, (I used a different TN, but changed it for privacy) which makes the call and returns events before I answer the call, BUT the conf bridge does not get involved (called) until AFTER the origination call is answered.
Neither of these allows me to get “start-talking” and “stop-talking” events during Early Media from the conf bridge because the conference is not involved during the early media part of the call.
Brian –
I should have been more detailed in my sofia string in the subject. I am aware that sofia/ip/user is not valid. Two examples sofia string I use are below.
* If I used sofia/10.50.48.222/1002 AND that user is registered and answers, then all works well. If that user is not registered, I need to get USER_NOT_REGISTERED
* If I use sofia/internal/+18015@10.50.40.50 (which is not a valid E.164 TN) then I should get DESTINATION_OUT_OF_ORDER or some other error message.
------------------------------
*From:* freeswitch-dev-bounces@lists.freeswitch.org [mailto: freeswitch-dev-bounces@lists.freeswitch.org] *On Behalf Of *Anthony Minessale *Sent:* Wednesday, March 10, 2010 12:16 PM *To:* freeswitch-dev@lists.freeswitch.org *Subject:* Re: [Freeswitch-dev] error events for failed calls using'conference conf_name bgdial sofia/ip/user'
consider
api originate <dialstring> conference conf_uuid-TEST_CONF inline
this returns success+uuid or fail
On Wed, Mar 10, 2010 at 12:04 PM, Brian West <brian@freeswitch.org> wrote:
http://wiki.freeswitch.org/wiki/Dialplan_XML#SIP-Specific_Dialstrings
Please read that there is no such thing as sofia/ip/user (unless the ip is an alias on the profile)
/b
On Mar 10, 2010, at 11:23 AM, Gledhill, James wrote:
My goals are:
1) To get “start-talking” and “stop-talking” events during Early Media (before the call is answered) as well as after the call is answered.
2) If there are problems with the call, get events that tell me why the call failed.
The way I am doing it accomplishes the start/stop talking (in early media) BUT if the call fails, I do not get events back letting me know it failed and why. I DO get CHANNEL_DESTROY and CHANNEL_STATE events that IF I had the UUID, I could match against, but at this point in the call I do NOT have that UUID AND when setting the UUID via “origination_uuid=my_uuid_my_uuid_my_test_uuid”, my UUID has not yet been set, so as far as I can tell there is no way to match those events with details my application has at the time.
The console shows the errors (Below are two examples of calls that failed in I entered “bad” sofia locations), but they do not come back as events.
2010-03-05 14:52:20.109497 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [USER_NOT_REGISTERED]
2010-03-05 16:34:13.669509 [ERR] switch_ivr_originate.c:2389 Cannot create outgoing channel of type [sofia] cause: [DESTINATION_OUT_OF_ORDER]
So … I am wondering is there a better/different way to do it, is there a work-around, should I get events to tell me the dial had problems, etc.
I am using esl/lua and esl/java to experiment with this. Both get the same results (as I would expect).
I have had this as a ~take-a-number on IRC for about a week, so I thought I would add more detail and open it up to this group. I realize many of the same people do both, but hoped more eyes may look at it here and give thoughts.
===== From Pastebin ====
I am not getting 'error' events in ESL [that match a UUID I can track] when there is a problem with conference <conf_name> dial sofia/myip/1006, so I can not tell what went wrong. Is there a work-around?
I start a call in a conference from ESL (conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/ 10.50.48.232/1006)
If the 'dial' works (meaning does not get an error) then I get the events I want and expect. If it errors (not able to make the call ( [USER_NOT_REGISTERED] | [DESTINATION_OUT_OF_ORDER] | etc. ) then I do not get any events that tell me something went wrong.
Is there a work-around for this?
=====================
LUA Code run from ./freeswitch.trunk/libs/esl/lua
#!/usr/local/bin/lua
require("ESL")
myip = "10.50.48.239" -- change this to your IP address
myExt = 1006 -- change to one that is registered, then rerun with an unregistered
con = ESL.ESLconnection("localhost", "8021", "ClueCon");
str = string.format("conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/%s/%s", myip, myExt)
con:sendRecv("event plain ALL")
ff = con:api( str )
print("** sent " .. str )
print( (ff and ff:getBody() or "no body" ))
cnt = 0
while cnt <= 30 do
print("loop = " .. cnt )
cnt = cnt + 1
ev = con:recvEventTimed(1000)
print( ev and ev:serialize("plain") or "no event this time" )
end
==============
The printout is :
** sent conference conf_uuid-TEST_CONF bgdial [origination_uuid=my_uuid_my_uuid_my_test_uuid]sofia/10.50.48.239/1006
OK Job-UUID: a5d57b34-9205-483c-ae64-60601d8178d7
loop = 0
Event-Name: CHANNEL_DESTROY
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_core_session.c
Event-Calling-Function: switch_core_session_perform_destroy
Event-Calling-Line-Number: 1051
Channel-State: CS_NEW
Channel-State-Number: 0
Channel-Name: N/A
Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66
Call-Direction: outbound
Presence-Call-Direction: outbound
Answer-State: ringing
loop = 1
Event-Name: CHANNEL_STATE
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_channel.c
Event-Calling-Function: switch_channel_perform_set_running_state
Event-Calling-Line-Number: 1301
Channel-State: CS_DESTROY
Channel-State-Number: 12
Channel-Name: _undef_
Unique-ID: ff9f875e-941f-438a-b384-844a6da23f66
Call-Direction: outbound
Presence-Call-Direction: outbound
Answer-State: ringing
loop = 2
Event-Name: API
Core-UUID: 438a66f9-8e41-4c6a-bbfd-1b0e8527cec1
FreeSWITCH-Hostname: tpa-es-rh-232.dev.sipstorm.com
FreeSWITCH-IPv4: 10.50.48.232
FreeSWITCH-IPv6: %3A%3A1
Event-Date-Local: 2010-03-05%2017%3A06%3A52
Event-Date-GMT: Fri,%2005%20Mar%202010%2022%3A06%3A52%20GMT
Event-Date-Timestamp: 1267826812571550
Event-Calling-File: switch_loadable_module.c
Event-Calling-Function: switch_api_execute
Event-Calling-Line-Number: 1581
API-Command: conference
API-Command-Argument: conf_uuid-TEST_CONF%20bgdial%20%5Borigination_uuid%3Dmy_uuid_my_uuid_my_test_uuid%5Dsofia/ 10.50.48.239/1006%20
loop = 3
no event this time
loop = 4
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
participants (3)
-
Anthony Minessale
-
Brian West
-
Gledhill, James