Re: [Freeswitch-dev] FreeSWITCH-dev Digest, Vol 64, Issue 19
COMPILING FREESWITCH ON WINDOWS 7 FROM THE GIT ----------------------------------------------------------------------------------------- Hi guys, just to give you some update from the trenches and give you some update on compiling FreeSwitch on Windows from the git.(what a journey!!!) I can tell you that so far, it appeared to be one of the most frustrating experience in building a system from a git: files are missing or are not loaded properly as they should... So after a few nights of sctatching my head, here is the status: *Building on Windows from a git repository -------------------------------------------------------------* After git cloning the repository, open vs2008 solution then: Stop Comodo or any firewall and virus detection (if not this screws up download scripts giving: util.vbs(184, 2) msxml3.dll errors) *0) launch build* *1) insure all the supposed dowloaded directories are present. (!!!!!!!!!!!!! VITAL !!!!!!!!)* Actually there are some problems: -> issue with opensssl download ------------------------------------------------- for a strange reason after autodownload the untar is not complete, resulting in missing subdirectory So make sure to do it by hand if necessary -> issue with CELT download ------------------------------------------- MUST change prebuilt instructions to : if not exist "$(ProjectDir)..\celt-0.10.0" cscript /nologo "$(ProjectDir)util.vbs" GetUnzip http://files.freeswitch.org/downloads/libs/celt-0.10.0.tar.gz"$(ProjectDir).." xcopy "$(ProjectDir)\celt\config.h" "$(ProjectDir)..\celt-0.10.0\libcelt\" /C /D /Y /S /I xcopy "$(ProjectDir)\celt\float_cast.h" "$(ProjectDir)..\celt-0.10.0\libcelt\" /C /D /Y /S /I *2) if you uses Windows sdk 7.1* edit fake-rfc2533.h and comment out : #ifdef nodef // *****add this #ifndef HAVE_STRUCT_ADDRINFO struct addrinfo { int ai_flags; /* AI_PASSIVE, AI_CANONNAME */ int ai_family; /* PF_xxx */ int ai_socktype; /* SOCK_xxx */ int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */ size_t ai_addrlen; /* length of ai_addr */ char *ai_canonname; /* canonical name for hostname */ struct sockaddr *ai_addr; /* binary address */ struct addrinfo *ai_next; /* next structure in linked list */ }; #endif /* !HAVE_STRUCT_ADDRINFO */ #endif // *****add this *3) if issue with folder: sofia-sip * cannot include file sip-extra.h ??????????????????????????????????????? (I'm fed up with this so I just decided to get it from a tar) *4) pb on compile : libsndfile* in sofia_presence.c if (mod_sofia_globals.debug_presence > 1) { int i; // to be added for (i = 0; i < argc; i++) { //---------------------------------------------------------------------------------- That's it for the time being, most of the stuff (but not ALL) now compile and I'll try to focus on other pending issues. OBVIOUSLY ANY ADVICE IS MORE THEN WELCOME !!!! 2011/10/23 <freeswitch-dev-request@lists.freeswitch.org>
Send FreeSWITCH-dev mailing list submissions to freeswitch-dev@lists.freeswitch.org
To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev or, via email, send a message with subject or body 'help' to freeswitch-dev-request@lists.freeswitch.org
You can reach the person managing the list at freeswitch-dev-owner@lists.freeswitch.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of FreeSWITCH-dev digest..."
Today's Topics:
1. == ISSUE building FreeSwitch on Windows (marco blaisou) 2. Re: Strange behaviour in SOFIA SIP (Visciano Giovanni) 3. Re: == ISSUE building FreeSwitch on Windows (Peter Olsson)
---------- Message transféré ---------- From: marco blaisou <blaisounou@gmail.com> To: freeswitch-dev@lists.freeswitch.org Date: Sat, 22 Oct 2011 16:59:56 +0200 Subject: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows Hi guys, For the few days I've been unsuccesfull in building FreeSwith on Windows 7
I did follow the Wiki line per line, but some thing is really going wrong:
apparently the files in /libs directory are not loaded from the net (ie the util.vbs does seem to load and unpack the libs) error is : *freeswitch\libs\win32\util.vbs(184, 2) msxml3.dll: Le système ne trouve pas la ressource spécifiée (ie system doesn't find specified resource)*
then obviously the compiler starts complaining about missing stuff such as: *c:\users\jc\desktop\voip\freeswitch\freeswitch\src\mod\endpoints\mod_sofia\mod_sofia.h(47) : fatal error C1083: Cannot open include file: 'switch_version.h': No such file or directory*
To summarize: I loaded the FreeSwitch git repository with TortoiseGit
My config is : Windows 7/64bits VSC2008 sp1 Windows SDK 7.1
My firewall is desactivated as suggested
I did follow the recommendation to clear some files: *del libs\apr\include\apr.h del libs\js\config.h del libs\js\src\jsautocfg.h del libs\js\nsprpub\pr\include\prcpucfg.h del libs\iksemel\include\config.h del libs\xmlrpc-c\xmlrpc_config.h del libs\libsndfile\src\sfconfig.h del libs\sofia-sip\libsofia-sip-ua\su\sofia-sip\su_configure.h del libs\js\nsprpub\pr\include\prcpucfg.h
cd libs\win32\libsndfile rename config.h sfconfig.h*
Could a guru provide some hints on how to solve this??? Thanks
---------- Message transféré ---------- From: "Visciano Giovanni" <Giovanni.Visciano@italtel.it> To: <freeswitch-dev@lists.freeswitch.org> Date: Sat, 22 Oct 2011 20:30:06 +0200 Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP Now I understand. If both legs use the same codec, the codec ("fake") will be used in a pass-through way, so no additional transcoding is applied, as in PROXY PASS-THROUGH condition.
So let me reason in a default media scenario (no proxy-media).
Now, as I explained in the first mail, sofia build "ep_codec_string" (SWITCH_ ORIGINATOR_CODEC_VARIABLE) as the intersection between the codec list received in SDP offer and the codec loaded in the core. So if the offered SDP codec list is NOT a subset of the loaded core codecs the other legs will miss some codecs proposed by the calling endpoint. That said, if I want to be sure every codecs my endpoint support won't be filtered I have to register a "fake" pass-through codec for each one.
... you did not answer to my last question :). I haven't found any other endpoint module the can interwork in PROXY mode with sofia (even h323 doesn't support this). My question: is there a standard/ recommended way to exchange capability between endpoint of different nature in FS proxy mode? Maybe using SDP o/a as done in sofia sip?
Thank you again for you help. Giovanni
-----Original Message----- From: freeswitch-dev-bounces@lists.freeswitch.org on behalf of Anthony Minessale Sent: Sat 10/22/2011 4:48 PM To: freeswitch-dev@lists.freeswitch.org Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP
that's what I was trying to explain. PROXY mode does not let you manipulate anything, it's pure pass-through negotiation between the endpoints.
All the stuff with ep_codec_string are relevant only when you are not trying to use proxy mode. This is a common mistake people make assuming not using proxy mode means somehow doing more work but it's not the case, any time both legs of a call use the same codec it's equally efficient to what you end up with in proxy mode. proxy mode simply means take the inbound SDP and offer it AS IS to the far end and vice-versa and use a fake codec in the middle that is agnostic.
On Fri, Oct 21, 2011 at 10:36 AM, Visciano Giovanni <Giovanni.Visciano@italtel.it> wrote:
Hello Anthony. Maybe I want not so clear, let me explain.
I do not want to apply any codec manipulation, I'm working on a prototype endpoint module that has "proxy media capabilty" and wants to interoperate with other endpoints. What I saw is that in a sofia vs sofia call (proxy mode+late negotiation) they exchange through FS calling/called endpoint capability looking at SDP session carried by channel variables, so internally they use SDP O/A scheme. I thought that "ep_codec_string"->SWITCH_ORIGINATOR_CODEC_VARIABLE could be used to exchange capability without using a protocol specific format (SDP). If this is not the case, what's the right way to negotiate capability between endpoints in proxy mode?
Than you. Giovanni
PS: I did not find any existing endpoint except sofia that support this. Am I right?
-----Original Message----- From: freeswitch-dev-bounces@lists.freeswitch.org on behalf of Anthony Minessale Sent: Fri 10/21/2011 5:06 PM To: freeswitch-dev@lists.freeswitch.org Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP
any codec manipulation techniques and proxy media mode are not compatible. Proxy media mode means stay completely out of the codec negotiation process.
On Thu, Oct 20, 2011 at 3:11 PM, Visciano Giovanni <Giovanni.Visciano@italtel.it> wrote:
Preconditions on sip profile ---------------------------- inbound-codec-prefs NOT set outbound-codec-prefs NOT set inbound-proxy-media=TRUE inbound-bypass-media=FALSE inbound-late-negotiation=TRUE + inherit_codec=TRUE
TEST scenario ------------- SIP phone send INVITE with SDP to FS
INVITE SDP[codelist=PCMA, PCMU, G722, G729] --> FS
FS has just the CORE_PC_MODULE [PCMA, PCMU, PASS-THR, VIDEO-PASS-THR, L16]
The "ep_codec_string" channel variable is loaded with [PCMA, PCMU]
EXPECTED -------- In "proxy-media + late-negotiation" scenario: ep_codec_string=[PCMA,PCMU,G722,G729]
PROBLEM ------- According to the documentation (http://wiki.freeswitch.org/wiki/Codec_negotiation):
"ep_codec_string: This variable is only available if late negotiation is enabled on the profile. It's a readable string containing all the codecs proposed by the calling endpoint." and "inherit_codec=true (only applicable when late-negotiation is enabled) will take the codec negotiated when the B leg answers and pass it to the A leg so it also uses the same codec (if the A leg supports it); otherwise, it will use whatever it can from its own list"
The variable ep_codec_string doesn't contain ALL the codecs proposed by the calling endpoint. It contains the intersection between the codecs proposed by the calling and the codecs loaded in FS. In proxy-media / no-media configuration the called endpoint doesn't have the calling codec list so he can't negotiate using all the capabilities available. (I'm working on a test endpoint module that should work in proxy and no-media configuration ... mod_sofia vs mod_sofia works because they look at the remote sdp variable)
Source reference - sofia_glue.c->sofia_glue_set_r_sdp_codec_string()
Regards, Giovanni
Internet Email Confidentiality Footer
La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non
siete
i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto.
This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred.
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
---------- Message transféré ---------- From: Peter Olsson <peter.olsson@visionutveckling.se> To: "freeswitch-dev@lists.freeswitch.org" < freeswitch-dev@lists.freeswitch.org> Date: Sun, 23 Oct 2011 08:42:42 +0200 Subject: Re: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows I believe that you might be missing some system dll's on your machine.
msxml3.dll is something that should exist on your computer, and I think the download script is depending on it.
/Peter ________________________________________ Från: freeswitch-dev-bounces@lists.freeswitch.org [ freeswitch-dev-bounces@lists.freeswitch.org] för marco blaisou [ blaisounou@gmail.com] Skickat: den 22 oktober 2011 16:59 Till: freeswitch-dev@lists.freeswitch.org Ämne: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows
Hi guys, For the few days I've been unsuccesfull in building FreeSwith on Windows 7
I did follow the Wiki line per line, but some thing is really going wrong:
apparently the files in /libs directory are not loaded from the net (ie the util.vbs does seem to load and unpack the libs) error is : freeswitch\libs\win32\util.vbs(184, 2) msxml3.dll: Le système ne trouve pas la ressource spécifiée (ie system doesn't find specified resource)
then obviously the compiler starts complaining about missing stuff such as: c:\users\jc\desktop\voip\freeswitch\freeswitch\src\mod\endpoints\mod_sofia\mod_sofia.h(47) : fatal error C1083: Cannot open include file: 'switch_version.h': No such file or directory
To summarize: I loaded the FreeSwitch git repository with TortoiseGit
My config is : Windows 7/64bits VSC2008 sp1 Windows SDK 7.1
My firewall is desactivated as suggested
I did follow the recommendation to clear some files: del libs\apr\include\apr.h del libs\js\config.h del libs\js\src\jsautocfg.h del libs\js\nsprpub\pr\include\prcpucfg.h del libs\iksemel\include\config.h del libs\xmlrpc-c\xmlrpc_config.h del libs\libsndfile\src\sfconfig.h del libs\sofia-sip\libsofia-sip-ua\su\sofia-sip\su_configure.h del libs\js\nsprpub\pr\include\prcpucfg.h
cd libs\win32\libsndfile rename config.h sfconfig.h
Could a guru provide some hints on how to solve this??? Thanks
!DSPAM:4ea3271432761137115228!
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
I build FS on Windows every day, I rarely have problems with it, and if a problem occurs it's mostly because of a change in the code that works on Linux, but not Windows - but these kind of problems are usually fixed later the same day (or i just submit a patch, and it will be applied soon enough). Last time I did a complete rebuild of FS (with no libs downloaded) I also found some problems with openssl (but this has only happened once), but I just removed the openssl-folder and rebuilt, and everything worked, the rest of the things you mention here I've never heard of before. My guess is you have problems related to antivirus or UAC on your machine, but I will try to do a complete new rebuild today, and see how it looks for me - I'll get back to you after that. Also, please don't hijack other threads, send a new mail the next time, instead of replying to a digest mail. /Peter ________________________________________ Från: freeswitch-dev-bounces@lists.freeswitch.org [freeswitch-dev-bounces@lists.freeswitch.org] för marco blaisou [blaisounou@gmail.com] Skickat: den 23 oktober 2011 17:13 Till: freeswitch-dev@lists.freeswitch.org Ämne: Re: [Freeswitch-dev] FreeSWITCH-dev Digest, Vol 64, Issue 19 COMPILING FREESWITCH ON WINDOWS 7 FROM THE GIT ----------------------------------------------------------------------------------------- Hi guys, just to give you some update from the trenches and give you some update on compiling FreeSwitch on Windows from the git.(what a journey!!!) I can tell you that so far, it appeared to be one of the most frustrating experience in building a system from a git: files are missing or are not loaded properly as they should... So after a few nights of sctatching my head, here is the status: Building on Windows from a git repository ------------------------------------------------------------- After git cloning the repository, open vs2008 solution then: Stop Comodo or any firewall and virus detection (if not this screws up download scripts giving: util.vbs(184, 2) msxml3.dll errors) 0) launch build 1) insure all the supposed dowloaded directories are present. (!!!!!!!!!!!!! VITAL !!!!!!!!) Actually there are some problems: -> issue with opensssl download ------------------------------------------------- for a strange reason after autodownload the untar is not complete, resulting in missing subdirectory So make sure to do it by hand if necessary -> issue with CELT download ------------------------------------------- MUST change prebuilt instructions to : if not exist "$(ProjectDir)..\celt-0.10.0" cscript /nologo "$(ProjectDir)util.vbs" GetUnzip http://files.freeswitch.org/downloads/libs/celt-0.10.0.tar.gz "$(ProjectDir).." xcopy "$(ProjectDir)\celt\config.h" "$(ProjectDir)..\celt-0.10.0\libcelt\" /C /D /Y /S /I xcopy "$(ProjectDir)\celt\float_cast.h" "$(ProjectDir)..\celt-0.10.0\libcelt\" /C /D /Y /S /I 2) if you uses Windows sdk 7.1 edit fake-rfc2533.h and comment out : #ifdef nodef // *****add this #ifndef HAVE_STRUCT_ADDRINFO struct addrinfo { int ai_flags; /* AI_PASSIVE, AI_CANONNAME */ int ai_family; /* PF_xxx */ int ai_socktype; /* SOCK_xxx */ int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */ size_t ai_addrlen; /* length of ai_addr */ char *ai_canonname; /* canonical name for hostname */ struct sockaddr *ai_addr; /* binary address */ struct addrinfo *ai_next; /* next structure in linked list */ }; #endif /* !HAVE_STRUCT_ADDRINFO */ #endif // *****add this 3) if issue with folder: sofia-sip cannot include file sip-extra.h ??????????????????????????????????????? (I'm fed up with this so I just decided to get it from a tar) 4) pb on compile : libsndfile in sofia_presence.c if (mod_sofia_globals.debug_presence > 1) { int i; // to be added for (i = 0; i < argc; i++) { //---------------------------------------------------------------------------------- That's it for the time being, most of the stuff (but not ALL) now compile and I'll try to focus on other pending issues. OBVIOUSLY ANY ADVICE IS MORE THEN WELCOME !!!! 2011/10/23 <freeswitch-dev-request@lists.freeswitch.org<mailto:freeswitch-dev-request@lists.freeswitch.org>> Send FreeSWITCH-dev mailing list submissions to freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev or, via email, send a message with subject or body 'help' to freeswitch-dev-request@lists.freeswitch.org<mailto:freeswitch-dev-request@lists.freeswitch.org> You can reach the person managing the list at freeswitch-dev-owner@lists.freeswitch.org<mailto:freeswitch-dev-owner@lists.freeswitch.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of FreeSWITCH-dev digest..." Today's Topics: 1. == ISSUE building FreeSwitch on Windows (marco blaisou) 2. Re: Strange behaviour in SOFIA SIP (Visciano Giovanni) 3. Re: == ISSUE building FreeSwitch on Windows (Peter Olsson) ---------- Message transféré ---------- From: marco blaisou <blaisounou@gmail.com<mailto:blaisounou@gmail.com>> To: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Date: Sat, 22 Oct 2011 16:59:56 +0200 Subject: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows Hi guys, For the few days I've been unsuccesfull in building FreeSwith on Windows 7 I did follow the Wiki line per line, but some thing is really going wrong:
apparently the files in /libs directory are not loaded from the net (ie the util.vbs does seem to load and unpack the libs) error is : freeswitch\libs\win32\util.vbs(184, 2) msxml3.dll: Le système ne trouve pas la ressource spécifiée (ie system doesn't find specified resource)
then obviously the compiler starts complaining about missing stuff such as: c:\users\jc\desktop\voip\freeswitch\freeswitch\src\mod\endpoints\mod_sofia\mod_sofia.h(47) : fatal error C1083: Cannot open include file: 'switch_version.h': No such file or directory
To summarize: I loaded the FreeSwitch git repository with TortoiseGit My config is : Windows 7/64bits VSC2008 sp1 Windows SDK 7.1 My firewall is desactivated as suggested I did follow the recommendation to clear some files: del libs\apr\include\apr.h del libs\js\config.h del libs\js\src\jsautocfg.h del libs\js\nsprpub\pr\include\prcpucfg.h del libs\iksemel\include\config.h del libs\xmlrpc-c\xmlrpc_config.h del libs\libsndfile\src\sfconfig.h del libs\sofia-sip\libsofia-sip-ua\su\sofia-sip\su_configure.h del libs\js\nsprpub\pr\include\prcpucfg.h cd libs\win32\libsndfile rename config.h sfconfig.h Could a guru provide some hints on how to solve this??? Thanks ---------- Message transféré ---------- From: "Visciano Giovanni" <Giovanni.Visciano@italtel.it<mailto:Giovanni.Visciano@italtel.it>> To: <freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org>> Date: Sat, 22 Oct 2011 20:30:06 +0200 Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP Now I understand. If both legs use the same codec, the codec ("fake") will be used in a pass-through way, so no additional transcoding is applied, as in PROXY PASS-THROUGH condition. So let me reason in a default media scenario (no proxy-media). Now, as I explained in the first mail, sofia build "ep_codec_string" (SWITCH_ ORIGINATOR_CODEC_VARIABLE) as the intersection between the codec list received in SDP offer and the codec loaded in the core. So if the offered SDP codec list is NOT a subset of the loaded core codecs the other legs will miss some codecs proposed by the calling endpoint. That said, if I want to be sure every codecs my endpoint support won't be filtered I have to register a "fake" pass-through codec for each one. ... you did not answer to my last question :). I haven't found any other endpoint module the can interwork in PROXY mode with sofia (even h323 doesn't support this). My question: is there a standard/ recommended way to exchange capability between endpoint of different nature in FS proxy mode? Maybe using SDP o/a as done in sofia sip? Thank you again for you help. Giovanni -----Original Message----- From: freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org> on behalf of Anthony Minessale Sent: Sat 10/22/2011 4:48 PM To: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP that's what I was trying to explain. PROXY mode does not let you manipulate anything, it's pure pass-through negotiation between the endpoints. All the stuff with ep_codec_string are relevant only when you are not trying to use proxy mode. This is a common mistake people make assuming not using proxy mode means somehow doing more work but it's not the case, any time both legs of a call use the same codec it's equally efficient to what you end up with in proxy mode. proxy mode simply means take the inbound SDP and offer it AS IS to the far end and vice-versa and use a fake codec in the middle that is agnostic. On Fri, Oct 21, 2011 at 10:36 AM, Visciano Giovanni <Giovanni.Visciano@italtel.it<mailto:Giovanni.Visciano@italtel.it>> wrote:
Hello Anthony. Maybe I want not so clear, let me explain.
I do not want to apply any codec manipulation, I'm working on a prototype endpoint module that has "proxy media capabilty" and wants to interoperate with other endpoints. What I saw is that in a sofia vs sofia call (proxy mode+late negotiation) they exchange through FS calling/called endpoint capability looking at SDP session carried by channel variables, so internally they use SDP O/A scheme. I thought that "ep_codec_string"->SWITCH_ORIGINATOR_CODEC_VARIABLE could be used to exchange capability without using a protocol specific format (SDP). If this is not the case, what's the right way to negotiate capability between endpoints in proxy mode?
Than you. Giovanni
PS: I did not find any existing endpoint except sofia that support this. Am I right?
-----Original Message----- From: freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org> on behalf of Anthony Minessale Sent: Fri 10/21/2011 5:06 PM To: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP
any codec manipulation techniques and proxy media mode are not compatible. Proxy media mode means stay completely out of the codec negotiation process.
On Thu, Oct 20, 2011 at 3:11 PM, Visciano Giovanni <Giovanni.Visciano@italtel.it<mailto:Giovanni.Visciano@italtel.it>> wrote:
Preconditions on sip profile ---------------------------- inbound-codec-prefs NOT set outbound-codec-prefs NOT set inbound-proxy-media=TRUE inbound-bypass-media=FALSE inbound-late-negotiation=TRUE + inherit_codec=TRUE
TEST scenario ------------- SIP phone send INVITE with SDP to FS
INVITE SDP[codelist=PCMA, PCMU, G722, G729] --> FS
FS has just the CORE_PC_MODULE [PCMA, PCMU, PASS-THR, VIDEO-PASS-THR, L16]
The "ep_codec_string" channel variable is loaded with [PCMA, PCMU]
EXPECTED -------- In "proxy-media + late-negotiation" scenario: ep_codec_string=[PCMA,PCMU,G722,G729]
PROBLEM ------- According to the documentation (http://wiki.freeswitch.org/wiki/Codec_negotiation):
"ep_codec_string: This variable is only available if late negotiation is enabled on the profile. It's a readable string containing all the codecs proposed by the calling endpoint." and "inherit_codec=true (only applicable when late-negotiation is enabled) will take the codec negotiated when the B leg answers and pass it to the A leg so it also uses the same codec (if the A leg supports it); otherwise, it will use whatever it can from its own list"
The variable ep_codec_string doesn't contain ALL the codecs proposed by the calling endpoint. It contains the intersection between the codecs proposed by the calling and the codecs loaded in FS. In proxy-media / no-media configuration the called endpoint doesn't have the calling codec list so he can't negotiate using all the capabilities available. (I'm working on a test endpoint module that should work in proxy and no-media configuration ... mod_sofia vs mod_sofia works because they look at the remote sdp variable)
Source reference - sofia_glue.c->sofia_glue_set_r_sdp_codec_string()
Regards, Giovanni
Internet Email Confidentiality Footer
********************************************************************************************************************************************
La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto.
This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred. ********************************************************************************************************************************************
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com<mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net<http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org<mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900<tel:%2B19193869900>
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com<mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net<http://irc.freenode.net> #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org<mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900<tel:%2B19193869900> _______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org ---------- Message transféré ---------- From: Peter Olsson <peter.olsson@visionutveckling.se<mailto:peter.olsson@visionutveckling.se>> To: "freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org>" <freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org>> Date: Sun, 23 Oct 2011 08:42:42 +0200 Subject: Re: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows I believe that you might be missing some system dll's on your machine. msxml3.dll is something that should exist on your computer, and I think the download script is depending on it. /Peter ________________________________________ Från: freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org> [freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org>] för marco blaisou [blaisounou@gmail.com<mailto:blaisounou@gmail.com>] Skickat: den 22 oktober 2011 16:59 Till: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Ämne: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows Hi guys, For the few days I've been unsuccesfull in building FreeSwith on Windows 7 I did follow the Wiki line per line, but some thing is really going wrong:
apparently the files in /libs directory are not loaded from the net (ie the util.vbs does seem to load and unpack the libs) error is : freeswitch\libs\win32\util.vbs(184, 2) msxml3.dll: Le système ne trouve pas la ressource spécifiée (ie system doesn't find specified resource)
then obviously the compiler starts complaining about missing stuff such as: c:\users\jc\desktop\voip\freeswitch\freeswitch\src\mod\endpoints\mod_sofia\mod_sofia.h(47) : fatal error C1083: Cannot open include file: 'switch_version.h': No such file or directory
To summarize: I loaded the FreeSwitch git repository with TortoiseGit My config is : Windows 7/64bits VSC2008 sp1 Windows SDK 7.1 My firewall is desactivated as suggested I did follow the recommendation to clear some files: del libs\apr\include\apr.h del libs\js\config.h del libs\js\src\jsautocfg.h del libs\js\nsprpub\pr\include\prcpucfg.h del libs\iksemel\include\config.h del libs\xmlrpc-c\xmlrpc_config.h del libs\libsndfile\src\sfconfig.h del libs\sofia-sip\libsofia-sip-ua\su\sofia-sip\su_configure.h del libs\js\nsprpub\pr\include\prcpucfg.h cd libs\win32\libsndfile rename config.h sfconfig.h Could a guru provide some hints on how to solve this??? Thanks _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org !DSPAM:4ea488b232761113570065!
Update to this case: For mod_sofia I've created this Jira issue (with attached patch): FS-3633. Except this I found one more thing, it seems like the first build (at least in VS2008) might fail to build openssl before iksemel, which causes some headers to be missing. In that case, just build openssl project separately and then rebuild the solution (this only needs to be done once, a complete clean/rebuild won't require this after it's been done the first time). Except this everything is working just fine for me. I suggest you check that you don't have autocrlf set till true in git, this is a common misstake among Windows users. /Peter -----Ursprungligt meddelande----- Från: freeswitch-dev-bounces@lists.freeswitch.org [mailto:freeswitch-dev-bounces@lists.freeswitch.org] För Peter Olsson Skickat: den 24 oktober 2011 06:56 Till: freeswitch-dev@lists.freeswitch.org Ämne: Re: [Freeswitch-dev] FreeSWITCH-dev Digest, Vol 64, Issue 19 I build FS on Windows every day, I rarely have problems with it, and if a problem occurs it's mostly because of a change in the code that works on Linux, but not Windows - but these kind of problems are usually fixed later the same day (or i just submit a patch, and it will be applied soon enough). Last time I did a complete rebuild of FS (with no libs downloaded) I also found some problems with openssl (but this has only happened once), but I just removed the openssl-folder and rebuilt, and everything worked, the rest of the things you mention here I've never heard of before. My guess is you have problems related to antivirus or UAC on your machine, but I will try to do a complete new rebuild today, and see how it looks for me - I'll get back to you after that. Also, please don't hijack other threads, send a new mail the next time, instead of replying to a digest mail. /Peter ________________________________________ Från: freeswitch-dev-bounces@lists.freeswitch.org [freeswitch-dev-bounces@lists.freeswitch.org] för marco blaisou [blaisounou@gmail.com] Skickat: den 23 oktober 2011 17:13 Till: freeswitch-dev@lists.freeswitch.org Ämne: Re: [Freeswitch-dev] FreeSWITCH-dev Digest, Vol 64, Issue 19 COMPILING FREESWITCH ON WINDOWS 7 FROM THE GIT ----------------------------------------------------------------------------------------- Hi guys, just to give you some update from the trenches and give you some update on compiling FreeSwitch on Windows from the git.(what a journey!!!) I can tell you that so far, it appeared to be one of the most frustrating experience in building a system from a git: files are missing or are not loaded properly as they should... So after a few nights of sctatching my head, here is the status: Building on Windows from a git repository ------------------------------------------------------------- After git cloning the repository, open vs2008 solution then: Stop Comodo or any firewall and virus detection (if not this screws up download scripts giving: util.vbs(184, 2) msxml3.dll errors) 0) launch build 1) insure all the supposed dowloaded directories are present. (!!!!!!!!!!!!! VITAL !!!!!!!!) Actually there are some problems: -> issue with opensssl download ------------------------------------------------- for a strange reason after autodownload the untar is not complete, resulting in missing subdirectory So make sure to do it by hand if necessary -> issue with CELT download ------------------------------------------- MUST change prebuilt instructions to : if not exist "$(ProjectDir)..\celt-0.10.0" cscript /nologo "$(ProjectDir)util.vbs" GetUnzip http://files.freeswitch.org/downloads/libs/celt-0.10.0.tar.gz "$(ProjectDir).." xcopy "$(ProjectDir)\celt\config.h" "$(ProjectDir)..\celt-0.10.0\libcelt\" /C /D /Y /S /I xcopy "$(ProjectDir)\celt\float_cast.h" "$(ProjectDir)..\celt-0.10.0\libcelt\" /C /D /Y /S /I 2) if you uses Windows sdk 7.1 edit fake-rfc2533.h and comment out : #ifdef nodef // *****add this #ifndef HAVE_STRUCT_ADDRINFO struct addrinfo { int ai_flags; /* AI_PASSIVE, AI_CANONNAME */ int ai_family; /* PF_xxx */ int ai_socktype; /* SOCK_xxx */ int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */ size_t ai_addrlen; /* length of ai_addr */ char *ai_canonname; /* canonical name for hostname */ struct sockaddr *ai_addr; /* binary address */ struct addrinfo *ai_next; /* next structure in linked list */ }; #endif /* !HAVE_STRUCT_ADDRINFO */ #endif // *****add this 3) if issue with folder: sofia-sip cannot include file sip-extra.h ??????????????????????????????????????? (I'm fed up with this so I just decided to get it from a tar) 4) pb on compile : libsndfile in sofia_presence.c if (mod_sofia_globals.debug_presence > 1) { int i; // to be added for (i = 0; i < argc; i++) { //---------------------------------------------------------------------------------- That's it for the time being, most of the stuff (but not ALL) now compile and I'll try to focus on other pending issues. OBVIOUSLY ANY ADVICE IS MORE THEN WELCOME !!!! 2011/10/23 <freeswitch-dev-request@lists.freeswitch.org<mailto:freeswitch-dev-request@lists.freeswitch.org>> Send FreeSWITCH-dev mailing list submissions to freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev or, via email, send a message with subject or body 'help' to freeswitch-dev-request@lists.freeswitch.org<mailto:freeswitch-dev-request@lists.freeswitch.org> You can reach the person managing the list at freeswitch-dev-owner@lists.freeswitch.org<mailto:freeswitch-dev-owner@lists.freeswitch.org> When replying, please edit your Subject line so it is more specific than "Re: Contents of FreeSWITCH-dev digest..." Today's Topics: 1. == ISSUE building FreeSwitch on Windows (marco blaisou) 2. Re: Strange behaviour in SOFIA SIP (Visciano Giovanni) 3. Re: == ISSUE building FreeSwitch on Windows (Peter Olsson) ---------- Message transféré ---------- From: marco blaisou <blaisounou@gmail.com<mailto:blaisounou@gmail.com>> To: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Date: Sat, 22 Oct 2011 16:59:56 +0200 Subject: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows Hi guys, For the few days I've been unsuccesfull in building FreeSwith on Windows 7 I did follow the Wiki line per line, but some thing is really going wrong:
apparently the files in /libs directory are not loaded from the net (ie the util.vbs does seem to load and unpack the libs) error is : freeswitch\libs\win32\util.vbs(184, 2) msxml3.dll: Le système ne trouve pas la ressource spécifiée (ie system doesn't find specified resource)
then obviously the compiler starts complaining about missing stuff such as: c:\users\jc\desktop\voip\freeswitch\freeswitch\src\mod\endpoints\mod_sofia\mod_sofia.h(47) : fatal error C1083: Cannot open include file: 'switch_version.h': No such file or directory
To summarize: I loaded the FreeSwitch git repository with TortoiseGit My config is : Windows 7/64bits VSC2008 sp1 Windows SDK 7.1 My firewall is desactivated as suggested I did follow the recommendation to clear some files: del libs\apr\include\apr.h del libs\js\config.h del libs\js\src\jsautocfg.h del libs\js\nsprpub\pr\include\prcpucfg.h del libs\iksemel\include\config.h del libs\xmlrpc-c\xmlrpc_config.h del libs\libsndfile\src\sfconfig.h del libs\sofia-sip\libsofia-sip-ua\su\sofia-sip\su_configure.h del libs\js\nsprpub\pr\include\prcpucfg.h cd libs\win32\libsndfile rename config.h sfconfig.h Could a guru provide some hints on how to solve this??? Thanks ---------- Message transféré ---------- From: "Visciano Giovanni" <Giovanni.Visciano@italtel.it<mailto:Giovanni.Visciano@italtel.it>> To: <freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org>> Date: Sat, 22 Oct 2011 20:30:06 +0200 Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP Now I understand. If both legs use the same codec, the codec ("fake") will be used in a pass-through way, so no additional transcoding is applied, as in PROXY PASS-THROUGH condition. So let me reason in a default media scenario (no proxy-media). Now, as I explained in the first mail, sofia build "ep_codec_string" (SWITCH_ ORIGINATOR_CODEC_VARIABLE) as the intersection between the codec list received in SDP offer and the codec loaded in the core. So if the offered SDP codec list is NOT a subset of the loaded core codecs the other legs will miss some codecs proposed by the calling endpoint. That said, if I want to be sure every codecs my endpoint support won't be filtered I have to register a "fake" pass-through codec for each one. ... you did not answer to my last question :). I haven't found any other endpoint module the can interwork in PROXY mode with sofia (even h323 doesn't support this). My question: is there a standard/ recommended way to exchange capability between endpoint of different nature in FS proxy mode? Maybe using SDP o/a as done in sofia sip? Thank you again for you help. Giovanni -----Original Message----- From: freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org> on behalf of Anthony Minessale Sent: Sat 10/22/2011 4:48 PM To: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP that's what I was trying to explain. PROXY mode does not let you manipulate anything, it's pure pass-through negotiation between the endpoints. All the stuff with ep_codec_string are relevant only when you are not trying to use proxy mode. This is a common mistake people make assuming not using proxy mode means somehow doing more work but it's not the case, any time both legs of a call use the same codec it's equally efficient to what you end up with in proxy mode. proxy mode simply means take the inbound SDP and offer it AS IS to the far end and vice-versa and use a fake codec in the middle that is agnostic. On Fri, Oct 21, 2011 at 10:36 AM, Visciano Giovanni <Giovanni.Visciano@italtel.it<mailto:Giovanni.Visciano@italtel.it>> wrote:
Hello Anthony. Maybe I want not so clear, let me explain.
I do not want to apply any codec manipulation, I'm working on a prototype endpoint module that has "proxy media capabilty" and wants to interoperate with other endpoints. What I saw is that in a sofia vs sofia call (proxy mode+late negotiation) they exchange through FS calling/called endpoint capability looking at SDP session carried by channel variables, so internally they use SDP O/A scheme. I thought that "ep_codec_string"->SWITCH_ORIGINATOR_CODEC_VARIABLE could be used to exchange capability without using a protocol specific format (SDP). If this is not the case, what's the right way to negotiate capability between endpoints in proxy mode?
Than you. Giovanni
PS: I did not find any existing endpoint except sofia that support this. Am I right?
-----Original Message----- From: freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org> on behalf of Anthony Minessale Sent: Fri 10/21/2011 5:06 PM To: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Subject: Re: [Freeswitch-dev] Strange behaviour in SOFIA SIP
any codec manipulation techniques and proxy media mode are not compatible. Proxy media mode means stay completely out of the codec negotiation process.
On Thu, Oct 20, 2011 at 3:11 PM, Visciano Giovanni <Giovanni.Visciano@italtel.it<mailto:Giovanni.Visciano@italtel.it>> wrote:
Preconditions on sip profile ---------------------------- inbound-codec-prefs NOT set outbound-codec-prefs NOT set inbound-proxy-media=TRUE inbound-bypass-media=FALSE inbound-late-negotiation=TRUE + inherit_codec=TRUE
TEST scenario ------------- SIP phone send INVITE with SDP to FS
INVITE SDP[codelist=PCMA, PCMU, G722, G729] --> FS
FS has just the CORE_PC_MODULE [PCMA, PCMU, PASS-THR, VIDEO-PASS-THR, L16]
The "ep_codec_string" channel variable is loaded with [PCMA, PCMU]
EXPECTED -------- In "proxy-media + late-negotiation" scenario: ep_codec_string=[PCMA,PCMU,G722,G729]
PROBLEM ------- According to the documentation (http://wiki.freeswitch.org/wiki/Codec_negotiation):
"ep_codec_string: This variable is only available if late negotiation is enabled on the profile. It's a readable string containing all the codecs proposed by the calling endpoint." and "inherit_codec=true (only applicable when late-negotiation is enabled) will take the codec negotiated when the B leg answers and pass it to the A leg so it also uses the same codec (if the A leg supports it); otherwise, it will use whatever it can from its own list"
The variable ep_codec_string doesn't contain ALL the codecs proposed by the calling endpoint. It contains the intersection between the codecs proposed by the calling and the codecs loaded in FS. In proxy-media / no-media configuration the called endpoint doesn't have the calling codec list so he can't negotiate using all the capabilities available. (I'm working on a test endpoint module that should work in proxy and no-media configuration ... mod_sofia vs mod_sofia works because they look at the remote sdp variable)
Source reference - sofia_glue.c->sofia_glue_set_r_sdp_codec_string()
Regards, Giovanni
Internet Email Confidentiality Footer
********************************************************************************************************************************************
La presente comunicazione, con le informazioni in essa contenute e ogni documento o file allegato, e' rivolta unicamente alla/e persona/e cui e' indirizzata ed alle altre da questa autorizzata/e a riceverla. Se non siete i destinatari/autorizzati siete avvisati che qualsiasi azione, copia, comunicazione, divulgazione o simili basate sul contenuto di tali informazioni e' vietata e potrebbe essere contro la legge (art. 616 C.P., D.Lgs n. 196/2003 Codice in materia di protezione dei dati personali). Se avete ricevuto questa comunicazione per errore, vi preghiamo di darne immediata notizia al mittente e di distruggere il messaggio originale e ogni file allegato senza farne copia alcuna o riprodurne in alcun modo il contenuto.
This e-mail and its attachments are intended for the addressee(s) only and are confidential and/or may contain legally privileged information. If you have received this message by mistake or are not one of the addressees above, you may take no action based on it, and you may not copy or show it to anyone; please reply to this e-mail and point out the error which has occurred. ********************************************************************************************************************************************
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com<mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net<http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org<mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900<tel:%2B19193869900>
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com<mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net<http://irc.freenode.net> #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org<mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900<tel:%2B19193869900> _______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org ---------- Message transféré ---------- From: Peter Olsson <peter.olsson@visionutveckling.se<mailto:peter.olsson@visionutveckling.se>> To: "freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org>" <freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org>> Date: Sun, 23 Oct 2011 08:42:42 +0200 Subject: Re: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows I believe that you might be missing some system dll's on your machine. msxml3.dll is something that should exist on your computer, and I think the download script is depending on it. /Peter ________________________________________ Från: freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org> [freeswitch-dev-bounces@lists.freeswitch.org<mailto:freeswitch-dev-bounces@lists.freeswitch.org>] för marco blaisou [blaisounou@gmail.com<mailto:blaisounou@gmail.com>] Skickat: den 22 oktober 2011 16:59 Till: freeswitch-dev@lists.freeswitch.org<mailto:freeswitch-dev@lists.freeswitch.org> Ämne: [Freeswitch-dev] == ISSUE building FreeSwitch on Windows Hi guys, For the few days I've been unsuccesfull in building FreeSwith on Windows 7 I did follow the Wiki line per line, but some thing is really going wrong:
apparently the files in /libs directory are not loaded from the net (ie the util.vbs does seem to load and unpack the libs) error is : freeswitch\libs\win32\util.vbs(184, 2) msxml3.dll: Le système ne trouve pas la ressource spécifiée (ie system doesn't find specified resource)
then obviously the compiler starts complaining about missing stuff such as: c:\users\jc\desktop\voip\freeswitch\freeswitch\src\mod\endpoints\mod_sofia\mod_sofia.h(47) : fatal error C1083: Cannot open include file: 'switch_version.h': No such file or directory
To summarize: I loaded the FreeSwitch git repository with TortoiseGit My config is : Windows 7/64bits VSC2008 sp1 Windows SDK 7.1 My firewall is desactivated as suggested I did follow the recommendation to clear some files: del libs\apr\include\apr.h del libs\js\config.h del libs\js\src\jsautocfg.h del libs\js\nsprpub\pr\include\prcpucfg.h del libs\iksemel\include\config.h del libs\xmlrpc-c\xmlrpc_config.h del libs\libsndfile\src\sfconfig.h del libs\sofia-sip\libsofia-sip-ua\su\sofia-sip\su_configure.h del libs\js\nsprpub\pr\include\prcpucfg.h cd libs\win32\libsndfile rename config.h sfconfig.h Could a guru provide some hints on how to solve this??? Thanks _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org<mailto:FreeSWITCH-dev@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org _______________________________________________ Join us at ClueCon 2011, Aug 9-11, Chicago http://www.cluecon.com 877-7-4ACLUE FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org !DSPAM:4ea4ef5432761992943852!
participants (2)
-
marco blaisou
-
Peter Olsson