Hi, If you noticed the video-media-bug branch, I managed to record a video file with the following methods conference 3000 record /tmp/testrecord.fsv uuid_record <uuid> start /tmp/testrecord.fsv The first command works perfect as conference voice is L16, but the last one has bad audio I guess because it's PCMU ?. I noticed a SWITCH_FILE_NATIVE flags which is supposed to disable transcoding but in my case in mod_fsv the flag is not set so should it transcode to L16 before writing to the fsv file? Thanks. -- Seven Du Sent with Sparrow (http://www.sparrowmailapp.com/?sig)
yes, currently the fsv format expects L16 audio On Thu, Aug 30, 2012 at 4:00 AM, Seven Du <dujinfang@gmail.com> wrote:
Hi,
If you noticed the video-media-bug branch, I managed to record a video file with the following methods
conference 3000 record /tmp/testrecord.fsv
uuid_record <uuid> start /tmp/testrecord.fsv
The first command works perfect as conference voice is L16, but the last one has bad audio I guess because it's PCMU ?.
I noticed a SWITCH_FILE_NATIVE flags which is supposed to disable transcoding but in my case in mod_fsv the flag is not set so should it transcode to L16 before writing to the fsv file?
Thanks.
-- Seven Du Sent with Sparrow
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
yes, my problem is how to make sure switch_file _write always get L16 data when trigger by uuid_record? thanks 发自我的 iPhone 在 2012-8-31，上午4:36，Anthony Minessale <anthony.minessale@gmail.com> 写道：
yes, currently the fsv format expects L16 audio
On Thu, Aug 30, 2012 at 4:00 AM, Seven Du <dujinfang@gmail.com> wrote:
Hi,
If you noticed the video-media-bug branch, I managed to record a video file with the following methods
conference 3000 record /tmp/testrecord.fsv
uuid_record <uuid> start /tmp/testrecord.fsv
The first command works perfect as conference voice is L16, but the last one has bad audio I guess because it's PCMU ?.
I noticed a SWITCH_FILE_NATIVE flags which is supposed to disable transcoding but in my case in mod_fsv the flag is not set so should it transcode to L16 before writing to the fsv file?
Thanks.
-- Seven Du Sent with Sparrow
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Right now it always does raw l16 in any of the io or file funcs On Aug 30, 2012 7:23 PM, "dujinfang" <dujinfang@gmail.com> wrote:
yes, my problem is how to make sure switch_file _write always get L16 data when trigger by uuid_record?
thanks
发自我的 iPhone
在 2012-8-31，上午4:36，Anthony Minessale <anthony.minessale@gmail.com> 写道：
yes, currently the fsv format expects L16 audio
On Thu, Aug 30, 2012 at 4:00 AM, Seven Du <dujinfang@gmail.com> wrote:
Hi,
If you noticed the video-media-bug branch, I managed to record a video file with the following methods
conference 3000 record /tmp/testrecord.fsv
uuid_record <uuid> start /tmp/testrecord.fsv
The first command works perfect as conference voice is L16, but the last one has bad audio I guess because it's PCMU ?.
I noticed a SWITCH_FILE_NATIVE flags which is supposed to disable transcoding but in my case in mod_fsv the flag is not set so should it transcode to L16 before writing to the fsv file?
Thanks.
-- Seven Du Sent with Sparrow
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
ok, I figured out when use conference record, handle->channels = 1, but in uuid_record, handle->channels = 2, so the following code did the trick in fsv_file_write, but I'm not sure if it's the write approach. Why the *len is always 160 in both cases? where the other half channel data goes to? I use play_fsv so the playback should be right. Only tested on 8000HZ right now. If the following code is confusing I can submit a full patch. Thanks. uint16_t *x = data; if (handle->channels == 2) { /* should we use only one channel ? */ for (int i=0; i<160; i++) { x[i] = x[i*2]; } } -- Seven Du Sent with Sparrow (http://www.sparrowmailapp.com/?sig) On Friday, August 31, 2012 at 8:34 AM, Anthony Minessale wrote:
Right now it always does raw l16 in any of the io or file funcs On Aug 30, 2012 7:23 PM, "dujinfang" <dujinfang@gmail.com (mailto:dujinfang@gmail.com)> wrote:
yes, my problem is how to make sure switch_file _write always get L16 data when trigger by uuid_record?
thanks
发自我的 iPhone
在 2012-8-31，上午4:36，Anthony Minessale <anthony.minessale@gmail.com (mailto:anthony.minessale@gmail.com)> 写道：
yes, currently the fsv format expects L16 audio
On Thu, Aug 30, 2012 at 4:00 AM, Seven Du <dujinfang@gmail.com (mailto:dujinfang@gmail.com)> wrote:
Hi,
If you noticed the video-media-bug branch, I managed to record a video file with the following methods
conference 3000 record /tmp/testrecord.fsv
uuid_record <uuid> start /tmp/testrecord.fsv
The first command works perfect as conference voice is L16, but the last one has bad audio I guess because it's PCMU ?.
I noticed a SWITCH_FILE_NATIVE flags which is supposed to disable transcoding but in my case in mod_fsv the flag is not set so should it transcode to L16 before writing to the fsv file?
Thanks.
-- Seven Du Sent with Sparrow
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com (mailto:MSN%3Aanthony_minessale@hotmail.com) GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com (mailto:PAYPAL%3Aanthony.minessale@gmail.com) IRC: irc.freenode.net (http://irc.freenode.net) #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org (mailto:sip%3A888@conference.freeswitch.org) googletalk:conf+888@conference.freeswitch.org (mailto:googletalk%3Aconf%2B888@conference.freeswitch.org) pstn:+19193869900 (tel:%2B19193869900)
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
when you have multiple channels it still only uses the len of one channel assuming you will multiply that len by the * of channels for the real size. On Thu, Aug 30, 2012 at 10:15 PM, Seven Du <dujinfang@gmail.com> wrote:
ok, I figured out when use conference record, handle->channels = 1, but in uuid_record, handle->channels = 2, so the following code did the trick in fsv_file_write, but I'm not sure if it's the write approach. Why the *len is always 160 in both cases? where the other half channel data goes to? I use play_fsv so the playback should be right. Only tested on 8000HZ right now. If the following code is confusing I can submit a full patch. Thanks.
uint16_t *x = data;
if (handle->channels == 2) { /* should we use only one channel ? */ for (int i=0; i<160; i++) { x[i] = x[i*2]; } }
-- Seven Du Sent with Sparrow
On Friday, August 31, 2012 at 8:34 AM, Anthony Minessale wrote:
Right now it always does raw l16 in any of the io or file funcs
On Aug 30, 2012 7:23 PM, "dujinfang" <dujinfang@gmail.com> wrote:
yes, my problem is how to make sure switch_file _write always get L16 data when trigger by uuid_record?
thanks
发自我的 iPhone
在 2012-8-31，上午4:36，Anthony Minessale <anthony.minessale@gmail.com> 写道：
yes, currently the fsv format expects L16 audio
On Thu, Aug 30, 2012 at 4:00 AM, Seven Du <dujinfang@gmail.com> wrote:
Hi,
If you noticed the video-media-bug branch, I managed to record a video file with the following methods
conference 3000 record /tmp/testrecord.fsv
uuid_record <uuid> start /tmp/testrecord.fsv
The first command works perfect as conference voice is L16, but the last one has bad audio I guess because it's PCMU ?.
I noticed a SWITCH_FILE_NATIVE flags which is supposed to disable transcoding but in my case in mod_fsv the flag is not set so should it transcode to L16 before writing to the fsv file?
Thanks.
-- Seven Du Sent with Sparrow
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Thanks for explaining and sorry to bring you new questions, hope this is the last for this topic: On http://fisheye.freeswitch.org/changelog/freeswitch.git?cs=bdd391e5db830e97eb... between lines 697-700 I tried to mux the channels but volume is very very low, or I didn't do right. Any highlights? Line 703 has good sound but only has one channel. Question 2: fav should now support any rate 8000/16000 etc, but the ptime around line 571 is still hard coded. Is it possible to get this from the file handle? h.audio_ptime = 20; /* FIXME: hard coded */ Thanks. On Saturday, September 1, 2012 at 1:28 AM, Anthony Minessale wrote:
when you have multiple channels it still only uses the len of one channel assuming you will multiply that len by the * of channels for the real size.
On Thu, Aug 30, 2012 at 10:15 PM, Seven Du <dujinfang@gmail.com (mailto:dujinfang@gmail.com)> wrote:
ok, I figured out when use conference record, handle->channels = 1, but in uuid_record, handle->channels = 2, so the following code did the trick in fsv_file_write, but I'm not sure if it's the write approach. Why the *len is always 160 in both cases? where the other half channel data goes to? I use play_fsv so the playback should be right. Only tested on 8000HZ right now. If the following code is confusing I can submit a full patch. Thanks.
uint16_t *x = data;
if (handle->channels == 2) { /* should we use only one channel ? */ for (int i=0; i<160; i++) { x[i] = x[i*2]; } }
-- Seven Du Sent with Sparrow
On Friday, August 31, 2012 at 8:34 AM, Anthony Minessale wrote:
Right now it always does raw l16 in any of the io or file funcs
On Aug 30, 2012 7:23 PM, "dujinfang" <dujinfang@gmail.com (mailto:dujinfang@gmail.com)> wrote:
yes, my problem is how to make sure switch_file _write always get L16 data when trigger by uuid_record?
thanks
发自我的 iPhone
在 2012-8-31，上午4:36，Anthony Minessale <anthony.minessale@gmail.com (mailto:anthony.minessale@gmail.com)> 写道：
yes, currently the fsv format expects L16 audio
On Thu, Aug 30, 2012 at 4:00 AM, Seven Du <dujinfang@gmail.com (mailto:dujinfang@gmail.com)> wrote:
Hi,
If you noticed the video-media-bug branch, I managed to record a video file with the following methods
conference 3000 record /tmp/testrecord.fsv
uuid_record <uuid> start /tmp/testrecord.fsv
The first command works perfect as conference voice is L16, but the last one has bad audio I guess because it's PCMU ?.
I noticed a SWITCH_FILE_NATIVE flags which is supposed to disable transcoding but in my case in mod_fsv the flag is not set so should it transcode to L16 before writing to the fsv file?
Thanks.
-- Seven Du Sent with Sparrow
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com (mailto:anthony_minessale@hotmail.com) GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com (mailto:anthony.minessale@gmail.com) IRC: irc.freenode.net (http://irc.freenode.net) #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org (mailto:888@conference.freeswitch.org) googletalk:conf+888@conference.freeswitch.org (mailto:conf+888@conference.freeswitch.org) pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com (mailto:anthony_minessale@hotmail.com) GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com (mailto:anthony.minessale@gmail.com) IRC: irc.freenode.net (http://irc.freenode.net) #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org (mailto:888@conference.freeswitch.org) googletalk:conf+888@conference.freeswitch.org (mailto:conf+888@conference.freeswitch.org) pstn:+19193869900
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org (mailto:consulting@freeswitch.org) http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org (mailto:FreeSWITCH-dev@lists.freeswitch.org) http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
participants (3)
-
Anthony Minessale
-
dujinfang
-
Seven Du