1.2.0 doesn't build on CentOS using RPM spec file
Hi, I have been building Freeswitch both git head and 1.2.rc2 on CentOS 5 for some time. However the stable tarball of 1.2.0 fails using the spec file supplied with the error: libtool: link: ( cd ".libs" && rm -f "libcurl.la" && ln -s "../libcurl.la" "libcurl.la" ) make[3]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' Making all in src make[2]: Entering directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' (CDPATH="${ZSH_VERSION+.}:" && cd .. && autoheader) aclocal.m4:20: warning: this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:65: error: Autoconf version 2.62 or higher is required aclocal.m4:8467: AM_INIT_AUTOMAKE is expanded from... configure.ac:65: the top level autom4te: /usr/bin/m4 failed with exit status: 63 autoheader: /usr/bin/autom4te failed with exit status: 63 make[2]: *** [config.h.in] Error 63 make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl' make: *** [libs/curl/lib/libcurl.la] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build) RPM build errors: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build) Have the minimum requirements changed for Freeswitch? Thanks Tom
I tried adding rebootstrap.sh to the build before running ./configure. This fixed the first error, but later in the build I got another error: then mv -f ".deps/libfreeswitch_la-switch_apr.Tpo" ".deps/libfreeswitch_la-switch_apr.Plo"; else rm -f ".deps/libfreeswitch_la-switch_apr.Tpo"; exit 1; fi /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 466: CDPATH: command not found /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 1144: func_opt_split: command not found libtool: Version mismatch error. This is libtool 2.2.6b, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0' make: *** [all] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.46063 (%build) Thanks Tom On 08/08/12 19:32, Tom Parrott wrote:
Hi,
I have been building Freeswitch both git head and 1.2.rc2 on CentOS 5 for some time.
However the stable tarball of 1.2.0 fails using the spec file supplied with the error:
libtool: link: ( cd ".libs" && rm -f "libcurl.la" && ln -s "../libcurl.la" "libcurl.la" ) make[3]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' Making all in src make[2]: Entering directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' (CDPATH="${ZSH_VERSION+.}:" && cd .. && autoheader) aclocal.m4:20: warning: this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:65: error: Autoconf version 2.62 or higher is required aclocal.m4:8467: AM_INIT_AUTOMAKE is expanded from... configure.ac:65: the top level autom4te: /usr/bin/m4 failed with exit status: 63 autoheader: /usr/bin/autom4te failed with exit status: 63 make[2]: *** [config.h.in] Error 63 make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl' make: *** [libs/curl/lib/libcurl.la] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
RPM build errors: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
Have the minimum requirements changed for Freeswitch?
Thanks Tom
This is a problem where your machine doesnt like the bootstrapped tarball that you have... this is not a rpmbuild problem... also this is an issue that should have been reported via jira. We can not stress enough, please file all bugs via jira and add the information requested so that we can know the version etc that you are running K On Wed, Aug 8, 2012 at 2:23 PM, Tom Parrott <tomp@tomp.co.uk> wrote:
I tried adding rebootstrap.sh to the build before running ./configure.
This fixed the first error, but later in the build I got another error:
then mv -f ".deps/libfreeswitch_la-switch_apr.Tpo" ".deps/libfreeswitch_la-switch_apr.Plo"; else rm -f ".deps/libfreeswitch_la-switch_apr.Tpo"; exit 1; fi /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 466: CDPATH: command not found /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 1144: func_opt_split: command not found libtool: Version mismatch error. This is libtool 2.2.6b, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0' make: *** [all] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.46063 (%build)
Thanks Tom
On 08/08/12 19:32, Tom Parrott wrote:
Hi,
I have been building Freeswitch both git head and 1.2.rc2 on CentOS 5 for some time.
However the stable tarball of 1.2.0 fails using the spec file supplied with the error:
libtool: link: ( cd ".libs" && rm -f "libcurl.la" && ln -s "../libcurl.la" "libcurl.la" ) make[3]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' Making all in src make[2]: Entering directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' (CDPATH="${ZSH_VERSION+.}:" && cd .. && autoheader) aclocal.m4:20: warning: this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:65: error: Autoconf version 2.62 or higher is required aclocal.m4:8467: AM_INIT_AUTOMAKE is expanded from... configure.ac:65: the top level autom4te: /usr/bin/m4 failed with exit status: 63 autoheader: /usr/bin/autom4te failed with exit status: 63 make[2]: *** [config.h.in] Error 63 make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl' make: *** [libs/curl/lib/libcurl.la] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
RPM build errors: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
Have the minimum requirements changed for Freeswitch?
Thanks Tom
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
Join Us At ClueCon - Aug 7-9, 2012
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Hi, I gave up with the 1.2.0 tag branch, as it still wouldn't build when the 1.2.0 tag was checked out from git. I can report that the current git head builds perfectly though on CentOS 5, so looks like the issue has been fixed already. OK will log future stuff on Jira first. Sometimes feels like I can't win, I got a telling off on the Jitsi SIP client mailing for opening a bug on Jira first, without discussing it on the mailing list! Tom On 08/08/12 20:23, Tom Parrott wrote:
I tried adding rebootstrap.sh to the build before running ./configure.
This fixed the first error, but later in the build I got another error:
then mv -f ".deps/libfreeswitch_la-switch_apr.Tpo" ".deps/libfreeswitch_la-switch_apr.Plo"; else rm -f ".deps/libfreeswitch_la-switch_apr.Tpo"; exit 1; fi /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 466: CDPATH: command not found /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 1144: func_opt_split: command not found libtool: Version mismatch error. This is libtool 2.2.6b, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0' make: *** [all] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.46063 (%build)
Thanks Tom
On 08/08/12 19:32, Tom Parrott wrote:
Hi,
I have been building Freeswitch both git head and 1.2.rc2 on CentOS 5 for some time.
However the stable tarball of 1.2.0 fails using the spec file supplied with the error:
libtool: link: ( cd ".libs" && rm -f "libcurl.la" && ln -s "../libcurl.la" "libcurl.la" ) make[3]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' Making all in src make[2]: Entering directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' (CDPATH="${ZSH_VERSION+.}:" && cd .. && autoheader) aclocal.m4:20: warning: this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:65: error: Autoconf version 2.62 or higher is required aclocal.m4:8467: AM_INIT_AUTOMAKE is expanded from... configure.ac:65: the top level autom4te: /usr/bin/m4 failed with exit status: 63 autoheader: /usr/bin/autom4te failed with exit status: 63 make[2]: *** [config.h.in] Error 63 make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl' make: *** [libs/curl/lib/libcurl.la] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
RPM build errors: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
Have the minimum requirements changed for Freeswitch?
Thanks Tom
No sweat, Or philosophy is its easier to tell one guy his Jira is not a bug than to tell him cc: 2000 ppl that his email *is* a bug. Ppl actually scan Jira looking to help more than they do the lists and issues don't slip through the cracks on Jira. On Aug 10, 2012 1:02 PM, "Tom Parrott" <tomp@tomp.co.uk> wrote:
Hi,
I gave up with the 1.2.0 tag branch, as it still wouldn't build when the 1.2.0 tag was checked out from git.
I can report that the current git head builds perfectly though on CentOS 5, so looks like the issue has been fixed already.
OK will log future stuff on Jira first.
Sometimes feels like I can't win, I got a telling off on the Jitsi SIP client mailing for opening a bug on Jira first, without discussing it on the mailing list!
Tom
On 08/08/12 20:23, Tom Parrott wrote:
I tried adding rebootstrap.sh to the build before running ./configure.
This fixed the first error, but later in the build I got another error:
then mv -f ".deps/libfreeswitch_la-switch_apr.Tpo" ".deps/libfreeswitch_la-switch_apr.Plo"; else rm -f ".deps/libfreeswitch_la-switch_apr.Tpo"; exit 1; fi /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 466: CDPATH: command not found /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 1144: func_opt_split: command not found libtool: Version mismatch error. This is libtool 2.2.6b, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0' make: *** [all] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.46063 (%build)
Thanks Tom
On 08/08/12 19:32, Tom Parrott wrote:
Hi,
I have been building Freeswitch both git head and 1.2.rc2 on CentOS 5 for some time.
However the stable tarball of 1.2.0 fails using the spec file supplied with the error:
libtool: link: ( cd ".libs" && rm -f "libcurl.la" && ln -s "../libcurl.la" "libcurl.la" ) make[3]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' Making all in src make[2]: Entering directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' (CDPATH="${ZSH_VERSION+.}:" && cd .. && autoheader) aclocal.m4:20: warning: this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:65: error: Autoconf version 2.62 or higher is required aclocal.m4:8467: AM_INIT_AUTOMAKE is expanded from... configure.ac:65: the top level autom4te: /usr/bin/m4 failed with exit status: 63 autoheader: /usr/bin/autom4te failed with exit status: 63 make[2]: *** [config.h.in] Error 63 make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl' make: *** [libs/curl/lib/libcurl.la] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
RPM build errors: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
Have the minimum requirements changed for Freeswitch?
Thanks Tom
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
Join Us At ClueCon - Aug 7-9, 2012
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
the 1.2 branch builds on centos 6 if you start with a clean tree if you already have cruft from master/HEAD you will see issues... also keep in mind that many of us are still travelling home from ClueCon so that means internet connectivity is iffy at best Ken Sent from my iPad On Aug 10, 2012, at 1:01 PM, Tom Parrott <tomp@tomp.co.uk> wrote:
Hi,
I gave up with the 1.2.0 tag branch, as it still wouldn't build when the 1.2.0 tag was checked out from git.
I can report that the current git head builds perfectly though on CentOS 5, so looks like the issue has been fixed already.
OK will log future stuff on Jira first.
Sometimes feels like I can't win, I got a telling off on the Jitsi SIP client mailing for opening a bug on Jira first, without discussing it on the mailing list!
Tom
On 08/08/12 20:23, Tom Parrott wrote:
I tried adding rebootstrap.sh to the build before running ./configure.
This fixed the first error, but later in the build I got another error:
then mv -f ".deps/libfreeswitch_la-switch_apr.Tpo" ".deps/libfreeswitch_la-switch_apr.Plo"; else rm -f ".deps/libfreeswitch_la-switch_apr.Tpo"; exit 1; fi /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 466: CDPATH: command not found /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 1144: func_opt_split: command not found libtool: Version mismatch error. This is libtool 2.2.6b, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0' make: *** [all] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.46063 (%build)
Thanks Tom
On 08/08/12 19:32, Tom Parrott wrote:
Hi,
I have been building Freeswitch both git head and 1.2.rc2 on CentOS 5 for some time.
However the stable tarball of 1.2.0 fails using the spec file supplied with the error:
libtool: link: ( cd ".libs" && rm -f "libcurl.la" && ln -s "../libcurl.la" "libcurl.la" ) make[3]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' Making all in src make[2]: Entering directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' (CDPATH="${ZSH_VERSION+.}:" && cd .. && autoheader) aclocal.m4:20: warning: this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:65: error: Autoconf version 2.62 or higher is required aclocal.m4:8467: AM_INIT_AUTOMAKE is expanded from... configure.ac:65: the top level autom4te: /usr/bin/m4 failed with exit status: 63 autoheader: /usr/bin/autom4te failed with exit status: 63 make[2]: *** [config.h.in] Error 63 make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl' make: *** [libs/curl/lib/libcurl.la] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
RPM build errors: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
Have the minimum requirements changed for Freeswitch?
Thanks Tom
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
Join Us At ClueCon - Aug 7-9, 2012
FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
No problem, I have opened up a bug report on Jira for completeness. Hope the conference went well! Any chance of a Cluecon UK? :) Tom On 10/08/12 19:01, Tom Parrott wrote:
Hi,
I gave up with the 1.2.0 tag branch, as it still wouldn't build when the 1.2.0 tag was checked out from git.
I can report that the current git head builds perfectly though on CentOS 5, so looks like the issue has been fixed already.
OK will log future stuff on Jira first.
Sometimes feels like I can't win, I got a telling off on the Jitsi SIP client mailing for opening a bug on Jira first, without discussing it on the mailing list!
Tom
On 08/08/12 20:23, Tom Parrott wrote:
I tried adding rebootstrap.sh to the build before running ./configure.
This fixed the first error, but later in the build I got another error:
then mv -f ".deps/libfreeswitch_la-switch_apr.Tpo" ".deps/libfreeswitch_la-switch_apr.Plo"; else rm -f ".deps/libfreeswitch_la-switch_apr.Tpo"; exit 1; fi /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 466: CDPATH: command not found /home/rpmbuild/BUILD/freeswitch-1.2.0/libtool: line 1144: func_opt_split: command not found libtool: Version mismatch error. This is libtool 2.2.6b, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2.6b libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0' make: *** [all] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.46063 (%build)
Thanks Tom
On 08/08/12 19:32, Tom Parrott wrote:
Hi,
I have been building Freeswitch both git head and 1.2.rc2 on CentOS 5 for some time.
However the stable tarball of 1.2.0 fails using the spec file supplied with the error:
libtool: link: ( cd ".libs" && rm -f "libcurl.la" && ln -s "../libcurl.la" "libcurl.la" ) make[3]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/lib' Making all in src make[2]: Entering directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' (CDPATH="${ZSH_VERSION+.}:" && cd .. && autoheader) aclocal.m4:20: warning: this file was generated for autoconf 2.63. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:65: error: Autoconf version 2.62 or higher is required aclocal.m4:8467: AM_INIT_AUTOMAKE is expanded from... configure.ac:65: the top level autom4te: /usr/bin/m4 failed with exit status: 63 autoheader: /usr/bin/autom4te failed with exit status: 63 make[2]: *** [config.h.in] Error 63 make[2]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/rpmbuild/BUILD/freeswitch-1.2.0/libs/curl' make: *** [libs/curl/lib/libcurl.la] Error 2 error: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
RPM build errors: Bad exit status from /home/rpmbuild/tmp/rpm-tmp.30829 (%build)
Have the minimum requirements changed for Freeswitch?
Thanks Tom
participants (3)
-
Anthony Minessale
-
Ken Rice
-
Tom Parrott