[Freeswitch-dev] mod_socket
Hi everyone I think my issue could be fixed with mod_xml_curl but I'm using FS purely through sockets (inbound mode) When I get the park event, I execute some biz logic. Leg's A source IP plays a role in this logic so based on the value of the IP (a big pool of allowed IP addresses is generated dynamically and changes very fast so I have a logic to query this pool) all good so far. However, if the incoming channel’s source IP is not allowed I would still want to answer and continue on but I must challenge it with a user name and password that I have a logic to retrieve. Any thoughts on how should I go about doing the username/password challenge through the socket without starting a new listening socket for mod_xml_curl requests . I really appreciate any thoughts on this issue Many Thanks,
execute the "respond" application with "407" as the arg On Mon, Mar 28, 2011 at 4:45 PM, Ali R. <aroumie@yahoo.com> wrote:
Hi everyone I think my issue could be fixed with mod_xml_curl but I'm using FS purely through sockets (inbound mode) When I get the park event, I execute some biz logic. Leg's A source IP plays a role in this logic so based on the value of the IP (a big pool of allowed IP addresses is generated dynamically and changes very fast so I have a logic to query this pool) all good so far. However, if the incoming channel’s source IP is not allowed I would still want to answer and continue on but I must challenge it with a user name and password that I have a logic to retrieve. Any thoughts on how should I go about doing the username/password challenge through the socket without starting a new listening socket for mod_xml_curl requests . I really appreciate any thoughts on this issue
Many Thanks,
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Many thanks Anthony for the quick response; You are the hero. I will investigate and hope all goes well.... ----- Original Message ---- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 2:57:45 PM Subject: Re: [Freeswitch-dev] mod_socket execute the "respond" application with "407" as the arg On Mon, Mar 28, 2011 at 4:45 PM, Ali R. <aroumie@yahoo.com> wrote:
Hi everyone I think my issue could be fixed with mod_xml_curl but I'm using FS purely through sockets (inbound mode) When I get the park event, I execute some biz logic. Leg's A source IP plays a role in this logic so based on the value of the IP (a big pool of allowed IP addresses is generated dynamically and changes very fast so I have a logic to query this pool) all good so far. However, if the incoming channel’s source IP is not allowed I would still want to answer and continue on but I must challenge it with a user name and password that I have a logic to retrieve. Any thoughts on how should I go about doing the username/password challenge through the socket without starting a new listening socket for mod_xml_curl requests . I really appreciate any thoughts on this issue
Many Thanks,
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Your suggestion coupled with chapter 10 in the book -page 258-260, I will be able to achieve 100% of my goal . With the "respond" app I can force the auth/challenge to take place based on biz logic (that's 50% of my problem fixed) and mod_xml_curl will hand the [user] back to me on a different socket in the form of HTTP request where I respond with the password from my biz logic. Now my question is, is there a way to negotiate the user/password through mod_socket. I'm avoiding to have my app listening for inbound connection to respond to curl?. While at it, FreeSwitch's slogan should be "FreeSwitch understands Security" I'm saying so because on page 260 of the FreeSwitch book, I found out that there is a way that you can pass back the password hashed instead of plain text which allow me to store it hashed in the database...small thing but really smart Regards, ----- Original Message ---- From: Ali R. <aroumie@yahoo.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 3:07:42 PM Subject: Re: [Freeswitch-dev] mod_socket Many thanks Anthony for the quick response; You are the hero. I will investigate and hope all goes well.... ----- Original Message ---- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 2:57:45 PM Subject: Re: [Freeswitch-dev] mod_socket execute the "respond" application with "407" as the arg On Mon, Mar 28, 2011 at 4:45 PM, Ali R. <aroumie@yahoo.com> wrote:
Hi everyone I think my issue could be fixed with mod_xml_curl but I'm using FS purely through sockets (inbound mode) When I get the park event, I execute some biz logic. Leg's A source IP plays a role in this logic so based on the value of the IP (a big pool of allowed IP addresses is generated dynamically and changes very fast so I have a logic to query this pool) all good so far. However, if the incoming channel’s source IP is not allowed I would still want to answer and continue on but I must challenge it with a user name and password that I have a logic to retrieve. Any thoughts on how should I go about doing the username/password challenge through the socket without starting a new listening socket for mod_xml_curl requests . I really appreciate any thoughts on this issue
Many Thanks,
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
You cannot manipulate the user directory over the socket since the lookup itself is triggered by xml lookups when the phone registers, so you would need to use xml_curl for this. You should probably just make a CGI and use a real web server to handle it. On Mon, Mar 28, 2011 at 11:43 PM, Ali R. <aroumie@yahoo.com> wrote:
Your suggestion coupled with chapter 10 in the book -page 258-260, I will be able to achieve 100% of my goal . With the "respond" app I can force the auth/challenge to take place based on biz logic (that's 50% of my problem fixed) and mod_xml_curl will hand the [user] back to me on a different socket in the form of HTTP request where I respond with the password from my biz logic. Now my question is, is there a way to negotiate the user/password through mod_socket. I'm avoiding to have my app listening for inbound connection to respond to curl?. While at it, FreeSwitch's slogan should be "FreeSwitch understands Security" I'm saying so because on page 260 of the FreeSwitch book, I found out that there is a way that you can pass back the password hashed instead of plain text which allow me to store it hashed in the database...small thing but really smart
Regards,
----- Original Message ---- From: Ali R. <aroumie@yahoo.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 3:07:42 PM Subject: Re: [Freeswitch-dev] mod_socket
Many thanks Anthony for the quick response; You are the hero. I will investigate and hope all goes well....
----- Original Message ---- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 2:57:45 PM Subject: Re: [Freeswitch-dev] mod_socket
execute the "respond" application with "407" as the arg
On Mon, Mar 28, 2011 at 4:45 PM, Ali R. <aroumie@yahoo.com> wrote:
Hi everyone I think my issue could be fixed with mod_xml_curl but I'm using FS purely through sockets (inbound mode) When I get the park event, I execute some biz logic. Leg's A source IP plays a role in this logic so based on the value of the IP (a big pool of allowed IP addresses is generated dynamically and changes very fast so I have a logic to query this pool) all good so far. However, if the incoming channel’s source IP is not allowed I would still want to answer and continue on but I must challenge it with a user name and password that I have a logic to retrieve. Any thoughts on how should I go about doing the username/password challenge through the socket without starting a new listening socket for mod_xml_curl requests . I really appreciate any thoughts on this issue
Many Thanks,
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Thanks for taking the time to clarify it. A dedicated web server would scale better but this will be a big dependency. I will write a multi-threading module just to respond to xml_curl to emulate a web server and see how things perform with stress testing.... Thanks Again. ----- Original Message ---- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-dev@lists.freeswitch.org Sent: Tue, March 29, 2011 7:50:54 AM Subject: Re: [Freeswitch-dev] mod_socket You cannot manipulate the user directory over the socket since the lookup itself is triggered by xml lookups when the phone registers, so you would need to use xml_curl for this. You should probably just make a CGI and use a real web server to handle it. On Mon, Mar 28, 2011 at 11:43 PM, Ali R. <aroumie@yahoo.com> wrote:
Your suggestion coupled with chapter 10 in the book -page 258-260, I will be able to achieve 100% of my goal . With the "respond" app I can force the auth/challenge to take place based on biz logic (that's 50% of my problem fixed) and mod_xml_curl will hand the [user] back to me on a different socket in the form of HTTP request where I respond with the password from my biz logic. Now my question is, is there a way to negotiate the user/password through mod_socket. I'm avoiding to have my app listening for inbound connection to respond to curl?. While at it, FreeSwitch's slogan should be "FreeSwitch understands Security" I'm saying so because on page 260 of the FreeSwitch book, I found out that there is a way that you can pass back the password hashed instead of plain text which allow me to store it hashed in the database...small thing but really smart
Regards,
----- Original Message ---- From: Ali R. <aroumie@yahoo.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 3:07:42 PM Subject: Re: [Freeswitch-dev] mod_socket
Many thanks Anthony for the quick response; You are the hero. I will investigate and hope all goes well....
----- Original Message ---- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 2:57:45 PM Subject: Re: [Freeswitch-dev] mod_socket
execute the "respond" application with "407" as the arg
On Mon, Mar 28, 2011 at 4:45 PM, Ali R. <aroumie@yahoo.com> wrote:
Hi everyone I think my issue could be fixed with mod_xml_curl but I'm using FS purely through sockets (inbound mode) When I get the park event, I execute some biz logic. Leg's A source IP plays a role in this logic so based on the value of the IP (a big pool of allowed IP addresses is generated dynamically and changes very fast so I have a logic to query this pool) all good so far. However, if the incoming channel’s source IP is not allowed I would still want to answer and continue on but I must challenge it with a user name and password that I have a logic to retrieve. Any thoughts on how should I go about doing the username/password challenge through the socket without starting a new listening socket for mod_xml_curl requests . I really appreciate any thoughts on this issue
Many Thanks,
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
Hello All, Despite my best efforts, I am making no progress in getting channel authentication to work through mod_xml_curl. I would appreciate it so much if the community could help/guide me on this issue. Here is a brief summary of the scenarios I tried with no success. Scenario 1: Created an ACL (acl1) to allow (0.0.0.0/0) with (apply-inbound-acl=acl1 and apply-register-acl=acl1) in the internal profile where I thought when an ACL authenticated channel hits the dialplan, mod_socket will give me a chance to re-authenticate based on the source IP where if the source IP is allowed, I continue on. If the IP is not allowed, I would respond with “respond (407)” Now looking at fs_cli log and Wireshark monitoring, I noticed when I return “Respond” with 407 through socket to FS, mod_xml_curl does not post back any directory request to my CGI to re-authenticate based on user/password and ultimately the new channel is destroyed. Scenario 2: I removed the ACL related settings (mentioned in scenario 1) I was able to achieve my goal but not 100%. For every single REGISTER / INVITE request, mod_xml_curl was happily posting to my CGI a directory request where I responded with the corresponding password for the user and in case my biz logic finds an authorized IP, I simply return empty string for the password. It worked beautifully. However, when FS gets an INVITE request from a UA that is NOT registered already, mod_xml_curl does not post anything to my CGI and ultimately the sofia respond with “Proxy Authentication Required” and the channel is dead. It seems like I needed to create 2 SIP profiles one for ACL authentication and another for user/password challenge so mod_xml_curl will post everything to my CGI. I did not try this scenario due to the fact that this will not help me since adding new profile requires a new port to listen on which is something that breaks my project main requirements where I must keep SIP listening on standard port. Your suggestion and guidance is really appreciated I had already done my homework with fs wiki, the book, and the dev-list but no luck…. Thanks Ali R ----- Original Message ---- From: Ali R. <aroumie@yahoo.com> To: freeswitch-dev@lists.freeswitch.org Sent: Tue, March 29, 2011 9:44:03 AM Subject: Re: [Freeswitch-dev] mod_socket Thanks for taking the time to clarify it. A dedicated web server would scale better but this will be a big dependency. I will write a multi-threading module just to respond to xml_curl to emulate a web server and see how things perform with stress testing.... Thanks Again. ----- Original Message ---- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-dev@lists.freeswitch.org Sent: Tue, March 29, 2011 7:50:54 AM Subject: Re: [Freeswitch-dev] mod_socket You cannot manipulate the user directory over the socket since the lookup itself is triggered by xml lookups when the phone registers, so you would need to use xml_curl for this. You should probably just make a CGI and use a real web server to handle it. On Mon, Mar 28, 2011 at 11:43 PM, Ali R. <aroumie@yahoo.com> wrote:
Your suggestion coupled with chapter 10 in the book -page 258-260, I will be able to achieve 100% of my goal . With the "respond" app I can force the auth/challenge to take place based on biz logic (that's 50% of my problem fixed) and mod_xml_curl will hand the [user] back to me on a different socket in the form of HTTP request where I respond with the password from my biz logic. Now my question is, is there a way to negotiate the user/password through mod_socket. I'm avoiding to have my app listening for inbound connection to respond to curl?. While at it, FreeSwitch's slogan should be "FreeSwitch understands Security" I'm saying so because on page 260 of the FreeSwitch book, I found out that there is a way that you can pass back the password hashed instead of plain text which allow me to store it hashed in the database...small thing but really smart
Regards,
----- Original Message ---- From: Ali R. <aroumie@yahoo.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 3:07:42 PM Subject: Re: [Freeswitch-dev] mod_socket
Many thanks Anthony for the quick response; You are the hero. I will investigate and hope all goes well....
----- Original Message ---- From: Anthony Minessale <anthony.minessale@gmail.com> To: freeswitch-dev@lists.freeswitch.org Sent: Mon, March 28, 2011 2:57:45 PM Subject: Re: [Freeswitch-dev] mod_socket
execute the "respond" application with "407" as the arg
On Mon, Mar 28, 2011 at 4:45 PM, Ali R. <aroumie@yahoo.com> wrote:
Hi everyone I think my issue could be fixed with mod_xml_curl but I'm using FS purely through sockets (inbound mode) When I get the park event, I execute some biz logic. Leg's A source IP plays a role in this logic so based on the value of the IP (a big pool of allowed IP addresses is generated dynamically and changes very fast so I have a logic to query this pool) all good so far. However, if the incoming channel’s source IP is not allowed I would still want to answer and continue on but I must challenge it with a user name and password that I have a logic to retrieve. Any thoughts on how should I go about doing the username/password challenge through the socket without starting a new listening socket for mod_xml_curl requests . I really appreciate any thoughts on this issue
Many Thanks,
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
_______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900 _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org _______________________________________________ FreeSWITCH-dev mailing list FreeSWITCH-dev@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-dev UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-dev http://www.freeswitch.org
participants (2)
-
Ali R.
-
Anthony Minessale