I adjust rtp timestamp to increment += 160, still no good audio. i took code that handle speex previously, timestamp was set to 320increment. seems working fine with speex/16k
still no good ulaw audio. I'm converting up stream audio that sent to me in a large chunk, do some processing and now breaking up into smaller rtp chunk. do i have to limit the rtp paket rate to freeswitch (ie. 20ms delay between them)?
Thanks again.
On Thu, Aug 26, 2010 at 10:02 AM, Brian West
<brian@freeswitch.org> wrote:
Its could be your timestamps too... how many are you incrementing on each time stamp? If you lie about time timestamps say send timestamps that jump by 320 but only send 160 byte payload you're still going to get the warning I'm pretty sure.
/b
On Aug 26, 2010, at 8:54 AM, Johny Kadarisman Kwan wrote:
> Its excellent that FS able to auto adjust to 40ms.Sending 160 bytes payload does eliminate warning message from FS.
> My audio doesn't work yet, problem must be something else. At least no more issues on rtp audio framing ;)
>
> Thanks,
> JK