[Freeswitch-branches] [commit] r6755 - in freeswitch/branches/stkn/sofia-exp/trunk: . conf conf/autoload_configs conf/lang/en/vm conf/sip_profiles libs/libedit libs/libedit/doc libs/libedit/examples libs/libedit/src src src/include src/mod/applications/mod_dptools src/mod/event_handlers/mod_cdr_csv - freeswitch-branches@lists.freeswitch.org

13 Dec 2007

Author: stkn
Date: Thu Dec 13 12:16:17 2007
New Revision: 6755

Added:
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure.gnu
      - copied unchanged from r6752, /freeswitch/trunk/libs/libedit/configure.gnu
Removed:
   freeswitch/branches/stkn/sofia-exp/trunk/conf/autoload_configs/cdr.conf.xml
   freeswitch/branches/stkn/sofia-exp/trunk/conf/default_context_old.xml
Modified:
   freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln
   freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am
   freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh
   freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml
   freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml
   freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml
   freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml
   freeswitch/branches/stkn/sofia-exp/trunk/configure.in
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh
   freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in
   freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h
   freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c
   freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c
   freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c

Log:
Merge changes from trunk

Modified: freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln
==============================================================================

--- freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/Freeswitch.2008.sln	Thu Dec 13 12:16:17 2007
@@ -82,7 +82,6 @@
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "autoload_configs", "autoload_configs", "{3C90CCF0-2CDD-4A7A-ACFF-208C1E271692}"
 	ProjectSection(SolutionItems) = preProject
 		conf\autoload_configs\alsa.conf.xml = conf\autoload_configs\alsa.conf.xml
-		conf\autoload_configs\cdr.conf.xml = conf\autoload_configs\cdr.conf.xml
 		conf\autoload_configs\conference.conf.xml = conf\autoload_configs\conference.conf.xml
 		conf\autoload_configs\console.conf.xml = conf\autoload_configs\console.conf.xml
 		conf\autoload_configs\dialplan_directory.conf.xml = conf\autoload_configs\dialplan_directory.conf.xml
@@ -185,7 +184,6 @@
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "autoload_configs", "autoload_configs", "{4833F8E3-ABBF-4260-9DB1-B34015676CFC}"
 	ProjectSection(SolutionItems) = preProject
 		debug\conf\autoload_configs\alsa.conf.xml = debug\conf\autoload_configs\alsa.conf.xml
-		debug\conf\autoload_configs\cdr.conf.xml = debug\conf\autoload_configs\cdr.conf.xml
 		debug\conf\autoload_configs\conference.conf.xml = debug\conf\autoload_configs\conference.conf.xml
 		debug\conf\autoload_configs\console.conf.xml = debug\conf\autoload_configs\console.conf.xml
 		debug\conf\autoload_configs\dialplan_directory.conf.xml = debug\conf\autoload_configs\dialplan_directory.conf.xml
@@ -284,7 +282,6 @@
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "autoload_configs", "autoload_configs", "{8D29085B-952D-4594-9BB9-5781CE552D0A}"
 	ProjectSection(SolutionItems) = preProject
 		release\conf\autoload_configs\alsa.conf.xml = release\conf\autoload_configs\alsa.conf.xml
-		release\conf\autoload_configs\cdr.conf.xml = release\conf\autoload_configs\cdr.conf.xml
 		release\conf\autoload_configs\conference.conf.xml = release\conf\autoload_configs\conference.conf.xml
 		release\conf\autoload_configs\console.conf.xml = release\conf\autoload_configs\console.conf.xml
 		release\conf\autoload_configs\dialplan_directory.conf.xml = release\conf\autoload_configs\dialplan_directory.conf.xml

Modified: freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/Makefile.am	Thu Dec 13 12:16:17 2007
@@ -155,10 +155,7 @@
 
 
 
-
-libs/libedit/Makefile:
-	cd libs/libedit && ./configure CFLAGS="-D_XOPEN_SOURCE=600 -D_BSD_SOURCE=1" --disable-shared --with-pic
-libs/libedit/src/.libs/libedit.a: libs/libedit/Makefile
+libs/libedit/src/.libs/libedit.a:
 	cd libs/libedit && $(MAKE)
 
 $(libfreeswitch_la_SOURCES): $(CORE_LIBS) $(switch_builddir)/quiet_libtool modules.conf

Modified: freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/bootstrap.sh	Thu Dec 13 12:16:17 2007
@@ -4,7 +4,7 @@
 BASEDIR=`pwd`;
 LIBDIR=${BASEDIR}/libs;
 SUBDIRS="codec/g7xx codec/g726 codec/gsm codec/ilbc codec/lpc10 curl iax iksemel  \
-        js js/nsprpub libdingaling libresample libsndfile pcre sofia-sip \
+        js js/nsprpub libdingaling libedit libresample libsndfile pcre sofia-sip \
         speex sqlite srtp xmlrpc-c";
 
 

Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/lang/en/vm/sounds.xml	Thu Dec 13 12:16:17 2007
@@ -54,7 +54,7 @@
       <match>
 	<action function="play-file" data="voicemail/vm-you_have.wav"/>
 	<action function="say" data="1" method="pronounced" type="items"/>
-	<action function="play-file" data="voicemail/vm-$1.wav"/> 
+	<action function="play-file" data="voicemail/vm-$2.wav"/> 
 	<action function="play-file" data="voicemail/vm-message.wav"/>
 	<action function="play-file" data="voicemail/vm-in_folder.wav"/>
       </match>
@@ -63,7 +63,7 @@
       <match>
 	<action function="play-file" data="voicemail/vm-you_have.wav"/>
 	<action function="say" data="$1" method="pronounced" type="items"/>
-	<action function="play-file" data="voicemail/vm-$1.wav"/> 
+	<action function="play-file" data="voicemail/vm-$2.wav"/> 
 	<action function="play-file" data="voicemail/vm-messages.wav"/>
 	<action function="play-file" data="voicemail/vm-in_folder.wav"/>
       </match>

Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/default.xml	Thu Dec 13 12:16:17 2007
@@ -17,7 +17,6 @@
   <settings>
     <param name="debug" value="0"/>
     <param name="sip-trace" value="no"/>
-    <param name="log-level" value="0"/>
     <param name="context" value="public"/>
     <param name="rfc2833-pt" value="101"/>
     <param name="sip-port" value="5060"/>

Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/nat.xml	Thu Dec 13 12:16:17 2007
@@ -7,7 +7,6 @@
   <settings>
     <param name="debug" value="0"/>
     <param name="sip-trace" value="no"/>
-    <param name="log-level" value="0"/>
     <param name="rfc2833-pt" value="101"/>
     <param name="sip-port" value="5070"/>
     <param name="dialplan" value="XML"/>

Modified: freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/conf/sip_profiles/outbound.xml	Thu Dec 13 12:16:17 2007
@@ -12,7 +12,6 @@
   <settings>
     <param name="debug" value="0"/>
     <param name="sip-trace" value="no"/>
-    <param name="log-level" value="0"/>
     <param name="rfc2833-pt" value="101"/>
     <param name="sip-port" value="5080"/>
     <param name="dialplan" value="XML"/>

Modified: freeswitch/branches/stkn/sofia-exp/trunk/configure.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/configure.in	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/configure.in	Thu Dec 13 12:16:17 2007
@@ -401,8 +401,6 @@
           [AC_MSG_ERROR([libtermcap, libcurses or libncurses are required!])] )] )
 fi
 
-#AX_LIB_MYSQL([MINIMUM-VERSION]) 
-AX_LIB_MYSQL
 AX_CHECK_JAVA
 
 AM_CONDITIONAL([ADD_ODBC],[test "x$enable_core_odbc_support" != "xno"])
@@ -448,6 +446,9 @@
 AC_CONFIG_SUBDIRS(libs/srtp)
 AC_CONFIG_SUBDIRS(libs/sqlite)
 AC_CONFIG_SUBDIRS(libs/libresample)
+if test "$enable_core_libedit_support" = "yes" ; then
+    AC_CONFIG_SUBDIRS(libs/libedit)
+fi
 AC_CONFIG_SUBDIRS(libs/pcre)
 AC_CONFIG_SUBDIRS(libs/apr)
 AC_CONFIG_SUBDIRS(libs/apr-util)

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/Makefile.in	Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,15 +13,11 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -35,18 +31,18 @@
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
+subdir = .
 DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(top_srcdir)/configure COPYING ChangeLog INSTALL THANKS \
 	config.guess config.sub depcomp install-sh ltmain.sh missing
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
@@ -54,10 +50,13 @@
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -74,8 +73,6 @@
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -103,6 +100,7 @@
 F77 = @F77@
 FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -116,6 +114,7 @@
 LT_VERSION = @LT_VERSION@
 MAKEINFO = @MAKEINFO@
 MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
 NROFF = @NROFF@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
@@ -130,13 +129,13 @@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -148,6 +147,7 @@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -175,10 +175,13 @@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = foreign
-SUBDIRS = src examples doc
+SUBDIRS = src
 EXTRA_DIST = patches/README \
              patches/00-readline.h.patch \
              patches/01-strlcat.c.patch \
@@ -249,7 +252,7 @@
 config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -271,7 +274,6 @@
 
 distclean-libtool:
 	-rm -f libtool
-uninstall-info-am:
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -304,8 +306,7 @@
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
+$(RECURSIVE_CLEAN_TARGETS):
 	@failcom='exit 1'; \
 	for f in x $$MAKEFLAGS; do \
 	  case $$f in \
@@ -407,24 +408,22 @@
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/patches
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -438,7 +437,7 @@
 	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
 	    distdir=`$(am__cd) $(distdir) && pwd`; \
 	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
@@ -446,6 +445,8 @@
 	      $(MAKE) $(AM_MAKEFLAGS) \
 	        top_distdir="$$top_distdir" \
 	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -453,7 +454,7 @@
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -528,7 +529,7 @@
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
 	@cd $(distuninstallcheck_dir) \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -598,12 +599,20 @@
 
 install-data-am:
 
+install-dvi: install-dvi-recursive
+
 install-exec-am:
 
+install-html: install-html-recursive
+
 install-info: install-info-recursive
 
 install-man:
 
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -624,24 +633,26 @@
 
 ps-am:
 
-uninstall-am: uninstall-info-am
+uninstall-am:
 
-uninstall-info: uninstall-info-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
 
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-	check-am clean clean-generic clean-libtool clean-recursive \
-	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
-	dist-shar dist-tarZ dist-zip distcheck distclean \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+	dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
 	distclean-generic distclean-hdr distclean-libtool \
-	distclean-recursive distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am uninstall-info-am
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/aclocal.m4	Thu Dec 13 12:16:17 2007
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
+# 2005, 2006  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,9 +11,14 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf.  If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
-# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
+# serial 48 AC_PROG_LIBTOOL
 
 
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -1397,6 +1402,18 @@
   dynamic_linker=no
   ;;
 
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -1552,7 +1569,7 @@
   ;;
 
 # This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1581,7 +1598,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
+knetbsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1590,7 +1607,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
+  dynamic_linker='GNU ld.so'
   ;;
 
 netbsd*)
@@ -2298,7 +2315,7 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | dragonfly*)
+freebsd* | kfreebsd*-gnu | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
@@ -2352,11 +2369,11 @@
   ;;
 
 # This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd* | netbsdelf*-gnu)
+netbsd*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
@@ -3104,7 +3121,7 @@
   freebsd-elf*)
     _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
     ;;
-  freebsd* | dragonfly*)
+  freebsd* | kfreebsd*-gnu | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     _LT_AC_TAGVAR(ld_shlibs, $1)=yes
@@ -3263,7 +3280,7 @@
     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
     _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
     ;;
-  linux* | k*bsd*-gnu)
+  linux*)
     case $cc_basename in
       KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -3365,7 +3382,7 @@
 	;;
     esac
     ;;
-  netbsd* | netbsdelf*-gnu)
+  netbsd*)
     if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
       wlarc=
@@ -3560,7 +3577,7 @@
 	    # cannot just pass the convience library names through
 	    # without $wl.
 	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
 	    ;;
 	esac
 	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
@@ -4630,7 +4647,7 @@
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
-linux* | k*bsd*-gnu)
+linux*)
   if test "$host_cpu" = ia64; then
     symcode='[[ABCDGIRSTW]]'
     lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
@@ -4903,7 +4920,7 @@
 	    ;;
 	esac
 	;;
-      freebsd* | dragonfly*)
+      freebsd* | kfreebsd*-gnu | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
@@ -4946,7 +4963,7 @@
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu)
+      linux*)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -4989,7 +5006,7 @@
 	    ;;
 	esac
 	;;
-      netbsd* | netbsdelf*-gnu)
+      netbsd*)
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
@@ -5200,7 +5217,7 @@
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       case $cc_basename in
       icc* | ecc*)
 	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -5341,9 +5358,6 @@
   cygwin* | mingw*)
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
-  linux* | k*bsd*-gnu)
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-  ;;
   *)
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
@@ -5514,7 +5528,7 @@
       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -5540,13 +5554,12 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
       else
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -5876,7 +5889,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
@@ -5978,7 +5991,7 @@
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -6083,7 +6096,7 @@
  	'')
  	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
  	*)
- 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
  	esac ;;
       esac
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
@@ -6380,7 +6393,7 @@
 AC_MSG_RESULT([$SED])
 ])
 
-# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6390,14 +6403,29 @@
 # ----------------------------
 # Automake X.Y traces this macro to ensure aclocal.m4 has been
 # generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.10], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
 
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.6])])
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -6454,14 +6482,14 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 7
+# serial 8
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -6470,8 +6498,10 @@
 [AC_PREREQ(2.52)dnl
  ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
 	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -6485,15 +6515,14 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 9
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -6521,6 +6550,7 @@
 ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
        [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
        [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
        [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                    [depcc="$$1"   am_compiler_list=])
 
@@ -6586,6 +6616,7 @@
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -6638,7 +6669,8 @@
   AMDEPBACKSLASH='\'
 fi
 AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
 ])
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
@@ -6663,8 +6695,9 @@
   # some people rename them; so instead we look at the file content.
   # Grep'ing the first line is not enough: some people post-process
   # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
     dirpart=`AS_DIRNAME("$mf")`
   else
     continue
@@ -6711,8 +6744,8 @@
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6735,16 +6768,20 @@
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
 AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
 AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
 fi
 
 # test whether we have cygpath
@@ -6764,6 +6801,9 @@
  AC_SUBST([PACKAGE], [$1])dnl
  AC_SUBST([VERSION], [$2])],
 [_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
  AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
  AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
 
@@ -6799,6 +6839,10 @@
                   [_AM_DEPENDENCIES(CXX)],
                   [define([AC_PROG_CXX],
                           defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+                  [_AM_DEPENDENCIES(OBJC)],
+                  [define([AC_PROG_OBJC],
+                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
 ])
 
@@ -6834,7 +6878,7 @@
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -6912,14 +6956,14 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -6935,6 +6979,7 @@
 # If it does, set am_missing_run to use it, otherwise, to nothing.
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
 test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
@@ -6945,7 +6990,7 @@
 fi
 ])
 
-# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6953,60 +6998,23 @@
 
 # AM_PROG_MKDIR_P
 # ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
 AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
@@ -7118,9 +7126,21 @@
 if test "$cross_compiling" != no; then
   AC_CHECK_TOOL([STRIP], [strip], :)
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
+# Copyright (C) 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.guess	Thu Dec 13 12:16:17 2007
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2004-08-13'
+timestamp='2005-12-13'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -17,13 +17,15 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Originally written by Per Bothner <per@bothner.com>.
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
@@ -53,7 +55,7 @@
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -66,11 +68,11 @@
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -123,7 +125,7 @@
 	;;
  ,,*)   CC_FOR_BUILD=$CC ;;
  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac ; set_cc_for_build= ;'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 1994-08-24)
@@ -196,55 +198,20 @@
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
-	exit 0 ;;
-    amd64:OpenBSD:*:*)
-	echo x86_64-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    cats:OpenBSD:*:*)
-	echo arm-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    luna88k:OpenBSD:*:*)
-    	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips64-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     macppc:MirBSD:*:*)
 	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     alpha:OSF1:*:*)
 	case $UNAME_RELEASE in
 	*4.0)
@@ -297,37 +264,43 @@
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
 	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
+	exit ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
 	# of the specific Alpha model?
 	echo alpha-pc-interix
-	exit 0 ;;
+	exit ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
-	exit 0 ;;
+	exit ;;
     Amiga*:UNIX_System_V:4.0:*)
 	echo m68k-unknown-sysv4
-	exit 0;;
+	exit ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
+	exit ;;
     *:[Mm]orph[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-morphos
-	exit 0 ;;
+	exit ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
-	exit 0 ;;
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
     *:OS400:*:*)
         echo powerpc-ibm-os400
-	exit 0 ;;
+	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
 	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
+	exit ;;
     Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -335,32 +308,32 @@
 	else
 		echo pyramid-pyramid-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
-	exit 0 ;;
+	exit ;;
     DRS?6000:unix:4.0:6*)
 	echo sparc-icl-nx6
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
 	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
+	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     i86pc:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
 	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
 	# it's likely to be more like Solaris than SunOS4.
 	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:*:*)
 	case "`/usr/bin/arch -k`" in
 	    Series*|S4*)
@@ -369,10 +342,10 @@
 	esac
 	# Japanese Language versions have a version number like `4.1.3-JL'.
 	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
+	exit ;;
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
@@ -384,10 +357,10 @@
 		echo sparc-sun-sunos${UNAME_RELEASE}
 		;;
 	esac
-	exit 0 ;;
+	exit ;;
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -398,40 +371,40 @@
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
         echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
         echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
         echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     m68k:machten:*:*)
 	echo m68k-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RISC*:Mach:*:*)
 	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
+	exit ;;
     RISC*:ULTRIX:*:*)
 	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     2020:CLIX:*:* | 2430:CLIX:*:*)
 	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -455,32 +428,33 @@
 	  exit (-1);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
 	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Motorola:PowerMAX_OS:*:*)
 	echo powerpc-motorola-powermax
-	exit 0 ;;
+	exit ;;
     Motorola:*:4.3:PL8-*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:Power_UNIX:*:*)
 	echo powerpc-harris-powerunix
-	exit 0 ;;
+	exit ;;
     m88k:CX/UX:7*:*)
 	echo m88k-harris-cxux7
-	exit 0 ;;
+	exit ;;
     m88k:*:4*:R4*)
 	echo m88k-motorola-sysv4
-	exit 0 ;;
+	exit ;;
     m88k:*:3*:R3*)
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
@@ -496,29 +470,29 @@
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit 0 ;;
+ 	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
-	exit 0 ;;
+	exit ;;
     M88*:*:R3*:*)
 	# Delta 88k system running SVR3
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
 	echo m88k-tektronix-sysv3
-	exit 0 ;;
+	exit ;;
     Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
 	echo m68k-tektronix-bsd
-	exit 0 ;;
+	exit ;;
     *:IRIX*:*:*)
 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
+	exit ;;
     ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
     i*86:AIX:*:*)
 	echo i386-ibm-aix
-	exit 0 ;;
+	exit ;;
     ia64:AIX:*:*)
 	if [ -x /usr/bin/oslevel ] ; then
 		IBM_REV=`/usr/bin/oslevel`
@@ -526,7 +500,7 @@
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
 		eval $set_cc_for_build
@@ -541,14 +515,18 @@
 			exit(0);
 			}
 EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-		echo rs6000-ibm-aix3.2.5
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
 	else
 		echo rs6000-ibm-aix3.2
 	fi
-	exit 0 ;;
+	exit ;;
     *:AIX:*:[45])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
@@ -562,28 +540,28 @@
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:*:*)
 	echo rs6000-ibm-aix
-	exit 0 ;;
+	exit ;;
     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
 	echo romp-ibm-bsd4.4
-	exit 0 ;;
+	exit ;;
     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
+	exit ;;                             # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
 	echo rs6000-bull-bosx
-	exit 0 ;;
+	exit ;;
     DPX/2?00:B.O.S.:*:*)
 	echo m68k-bull-sysv3
-	exit 0 ;;
+	exit ;;
     9000/[34]??:4.3bsd:1.*:*)
 	echo m68k-hp-bsd
-	exit 0 ;;
+	exit ;;
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
-	exit 0 ;;
+	exit ;;
     9000/[34678]??:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "${UNAME_MACHINE}" in
@@ -645,9 +623,19 @@
 	esac
 	if [ ${HP_ARCH} = "hppa2.0w" ]
 	then
-	    # avoid double evaluation of $set_cc_for_build
-	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -655,11 +643,11 @@
 	    fi
 	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     ia64:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	echo ia64-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     3050*:HI-UX:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -687,152 +675,166 @@
 	  exit (0);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
 	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
+	exit ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
 	echo hppa1.1-hp-bsd
-	exit 0 ;;
+	exit ;;
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
-	exit 0 ;;
+	exit ;;
     *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
-	exit 0 ;;
+	exit ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
-	exit 0 ;;
+	exit ;;
     hp8??:OSF1:*:*)
 	echo hppa1.0-hp-osf
-	exit 0 ;;
+	exit ;;
     i*86:OSF1:*:*)
 	if [ -x /usr/sbin/sysversion ] ; then
 	    echo ${UNAME_MACHINE}-unknown-osf1mk
 	else
 	    echo ${UNAME_MACHINE}-unknown-osf1
 	fi
-	exit 0 ;;
+	exit ;;
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
-	exit 0 ;;
+	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit 0 ;;
+        exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit 0 ;;
+        exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit 0 ;;
+        exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit 0 ;;
+        exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit 0 ;;
+        exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
 	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
 	      -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*T3E:*:*:*)
 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*SV1:*:*:*)
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     *:UNICOS/mp:*:*)
 	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
+        exit ;;
     5000:UNIX_System_V:4.*:*)
         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
         echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit 0 ;;
+	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sparc*:BSD/OS:*:*)
 	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:FreeBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
+	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
+	exit ;;
     i*:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
-	exit 0 ;;
-    x86:Interix*:[34]*)
+	exit ;;
+    x86:Interix*:[345]*)
 	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
-	exit 0 ;;
+	exit ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
-	exit 0 ;;
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
 	echo i586-pc-interix
-	exit 0 ;;
+	exit ;;
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
-	exit 0 ;;
+	exit ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     *:GNU:*:*)
 	# the GNU system
 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
+	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
 	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit 0 ;;
+	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
-	exit 0 ;;
+	exit ;;
     arm*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     cris:Linux:*:*)
 	echo cris-axis-linux-gnu
-	exit 0 ;;
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
     ia64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     m32r*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -849,8 +851,8 @@
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -868,15 +870,18 @@
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^CPU/{s: ::g;p;}'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
     ppc:Linux:*:*)
 	echo powerpc-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     ppc64:Linux:*:*)
 	echo powerpc64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -890,7 +895,7 @@
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit 0 ;;
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -898,25 +903,28 @@
 	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
 	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
-	exit 0 ;;
+	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
 	echo hppa64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
-	exit 0 ;;
+	exit ;;
     sh64*:Linux:*:*)
     	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     sh*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
     x86_64:Linux:*:*)
 	echo x86_64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -934,15 +942,15 @@
 		;;
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
+		exit ;;
 	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0 ;;
+		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
 		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit 0 ;;
+		exit ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
@@ -959,7 +967,7 @@
 	LIBC=gnulibc1
 	# endif
 	#else
-	#ifdef __INTEL_COMPILER
+	#if defined(__INTEL_COMPILER) || defined(__PGI)
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -969,16 +977,19 @@
 	LIBC=dietlibc
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
-	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '/^LIBC/{s: ::g;p;}'`"
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
 	;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
 	# sysname and nodename.
 	echo i386-sequent-sysv4
-	exit 0 ;;
+	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
         # Unixware is an offshoot of SVR4, but it has its own version
         # number series starting with 2...
@@ -986,27 +997,27 @@
 	# I just have to hope.  -- rms.
         # Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:OS/2:*:*)
 	# If we were able to find `uname', then EMX Unix compatibility
 	# is probably installed.
 	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
+	exit ;;
     i*86:XTS-300:*:STOP)
 	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
+	exit ;;
     i*86:atheos:*:*)
 	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
-	i*86:syllable:*:*)
+	exit ;;
+    i*86:syllable:*:*)
 	echo ${UNAME_MACHINE}-pc-syllable
-	exit 0 ;;
+	exit ;;
     i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     i*86:*DOS:*:*)
 	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
+	exit ;;
     i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -1014,15 +1025,16 @@
 	else
 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
-	exit 0 ;;
-    i*86:*:5:[78]*)
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
 	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
 	esac
 	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
@@ -1040,73 +1052,73 @@
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
-	exit 0 ;;
+	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
         # the processor, so we play safe by assuming i386.
 	echo i386-pc-msdosdjgpp
-        exit 0 ;;
+        exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
-	exit 0 ;;
+	exit ;;
     paragon:*:*:*)
 	echo i860-intel-osf1
-	exit 0 ;;
+	exit ;;
     i860:*:4.*:*) # i860-SVR4
 	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
 	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
 	else # Add other i860-SVR4 vendors below as they are discovered.
 	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
 	fi
-	exit 0 ;;
+	exit ;;
     mini*:CTIX:SYS*5:*)
 	# "miniframe"
 	echo m68010-convergent-sysv
-	exit 0 ;;
+	exit ;;
     mc68k:UNIX:SYSTEM5:3.51m)
 	echo m68k-convergent-sysv
-	exit 0 ;;
+	exit ;;
     M680?0:D-NIX:5.3:*)
 	echo m68k-diab-dnix
-	exit 0 ;;
+	exit ;;
     M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
     3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
 	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
+          && { echo i486-ncr-sysv4; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
-	exit 0 ;;
+	exit ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RM*:ReliantUNIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     *:SINIX-*:*:*)
 	if uname -p 2>/dev/null >/dev/null ; then
 		UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -1114,69 +1126,72 @@
 	else
 		echo ns32k-sni-sysv
 	fi
-	exit 0 ;;
+	exit ;;
     PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
                       # says <Richard.M.Bartel@ccMail.Census.GOV>
         echo i586-unisys-sysv4
-        exit 0 ;;
+        exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
 	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
+	exit ;;
     *:*:*:FTX*)
 	# From seanf@swdc.stratus.com.
 	echo i860-stratus-sysv4
-	exit 0 ;;
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
     *:VOS:*:*)
 	# From Paul.Green@stratus.com.
 	echo hppa1.1-stratus-vos
-	exit 0 ;;
+	exit ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     news*:NEWS-OS:6*:*)
 	echo mips-sony-newsos6
-	exit 0 ;;
+	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
 	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
 	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit 0 ;;
+        exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
-	exit 0 ;;
+	exit ;;
     BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
 	echo powerpc-apple-beos
-	exit 0 ;;
+	exit ;;
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
-	exit 0 ;;
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-5:SUPER-UX:*:*)
 	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Rhapsody:*:*)
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
-	    *86) UNAME_PROCESSOR=i686 ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
 	UNAME_PROCESSOR=`uname -p`
 	if test "$UNAME_PROCESSOR" = "x86"; then
@@ -1184,22 +1199,25 @@
 		UNAME_MACHINE=pc
 	fi
 	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
-	exit 0 ;;
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
     NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:NonStop-UX:*:*)
 	echo mips-compaq-nonstopux
-	exit 0 ;;
+	exit ;;
     BS2000:POSIX*:*:*)
 	echo bs2000-siemens-sysv
-	exit 0 ;;
+	exit ;;
     DS/*:UNIX_System_V:*:*)
 	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Plan9:*:*)
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
@@ -1210,38 +1228,47 @@
 	    UNAME_MACHINE="$cputype"
 	fi
 	echo ${UNAME_MACHINE}-unknown-plan9
-	exit 0 ;;
+	exit ;;
     *:TOPS-10:*:*)
 	echo pdp10-unknown-tops10
-	exit 0 ;;
+	exit ;;
     *:TENEX:*:*)
 	echo pdp10-unknown-tenex
-	exit 0 ;;
+	exit ;;
     KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
 	echo pdp10-dec-tops20
-	exit 0 ;;
+	exit ;;
     XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
 	echo pdp10-xkl-tops20
-	exit 0 ;;
+	exit ;;
     *:TOPS-20:*:*)
 	echo pdp10-unknown-tops20
-	exit 0 ;;
+	exit ;;
     *:ITS:*:*)
 	echo pdp10-unknown-its
-	exit 0 ;;
+	exit ;;
     SEI:*:*:SEIUX)
         echo mips-sei-seiux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:DragonFly:*:*)
 	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
+	exit ;;
     *:*VMS:*:*)
     	UNAME_MACHINE=`(uname -p) 2>/dev/null`
 	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms && exit 0 ;;
-	    I*) echo ia64-dec-vms && exit 0 ;;
-	    V*) echo vax-dec-vms && exit 0 ;;
-	esac
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1273,7 +1300,7 @@
 #endif
 
 #if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
+  printf ("arm-acorn-riscix\n"); exit (0);
 #endif
 
 #if defined (hp300) && !defined (hpux)
@@ -1362,11 +1389,12 @@
 }
 EOF
 
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
 
 # Apollos put the system type in the environment.
 
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
 
 # Convex versions that predate uname can use getsysinfo(1)
 
@@ -1375,22 +1403,22 @@
     case `getsysinfo -f cpu_type` in
     c1*)
 	echo c1-convex-bsd
-	exit 0 ;;
+	exit ;;
     c2*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     c34*)
 	echo c34-convex-bsd
-	exit 0 ;;
+	exit ;;
     c38*)
 	echo c38-convex-bsd
-	exit 0 ;;
+	exit ;;
     c4*)
 	echo c4-convex-bsd
-	exit 0 ;;
+	exit ;;
     esac
 fi
 
@@ -1401,7 +1429,9 @@
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-    ftp://ftp.gnu.org/pub/gnu/config/
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.gues...
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/config.sub	Thu Dec 13 12:16:17 2007
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2004-06-24'
+timestamp='2005-12-11'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +21,15 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
 #
@@ -70,7 +71,7 @@
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -83,11 +84,11 @@
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -99,7 +100,7 @@
     *local*)
        # First pass through any local machine types.
        echo $1
-       exit 0;;
+       exit ;;
 
     * )
        break ;;
@@ -118,8 +119,9 @@
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -170,6 +172,10 @@
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -186,6 +192,10 @@
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -231,13 +241,14 @@
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
 	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
 	| fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | mcore \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -246,6 +257,7 @@
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
@@ -254,23 +266,28 @@
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| mt \
 	| msp430 \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
 	| strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -278,6 +295,9 @@
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -298,7 +318,7 @@
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* \
-	| bs2000-* \
+	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
@@ -310,7 +330,7 @@
 	| ip2k-* | iq2000-* \
 	| m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -319,6 +339,7 @@
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
@@ -327,6 +348,7 @@
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
+	| mt-* \
 	| msp430-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
@@ -334,20 +356,23 @@
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
+	m32c-*)
+		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -457,6 +482,9 @@
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
@@ -486,6 +514,10 @@
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -676,6 +708,9 @@
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -751,9 +786,8 @@
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
 		;;
 	os400)
 		basic_machine=powerpc-ibm
@@ -840,6 +874,10 @@
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -1026,6 +1064,10 @@
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
@@ -1075,12 +1117,9 @@
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
 	sparc | sparcv8 | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
@@ -1161,13 +1200,15 @@
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1185,7 +1226,7 @@
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
@@ -1294,6 +1335,9 @@
 	-kaos*)
 		os=-kaos
 		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
 	-none)
 		;;
 	*)
@@ -1371,6 +1415,9 @@
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
@@ -1542,7 +1589,7 @@
 esac
 
 echo $basic_machine$os
-exit 0
+exit
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/configure	Thu Dec 13 12:16:17 2007
@@ -725,7 +725,7 @@
 
 # Identity of this package.
 PACKAGE_NAME='libedit'
-PACKAGE_TARNAME='libedit-20070302'
+PACKAGE_TARNAME='libedit-20071213'
 PACKAGE_VERSION='2.10'
 PACKAGE_STRING='libedit 2.10'
 PACKAGE_BUGREPORT=''
@@ -807,6 +807,7 @@
 INSTALL_PROGRAM
 INSTALL_SCRIPT
 INSTALL_DATA
+am__isrc
 CYGPATH_W
 PACKAGE
 VERSION
@@ -1439,7 +1440,7 @@
   --infodir=DIR          info documentation [DATAROOTDIR/info]
   --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
   --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/libedit-20070302]
+  --docdir=DIR           documentation root [DATAROOTDIR/doc/libedit-20071213]
   --htmldir=DIR          html documentation [DOCDIR]
   --dvidir=DIR           dvi documentation [DOCDIR]
   --pdfdir=DIR           pdf documentation [DOCDIR]
@@ -1933,7 +1934,8 @@
 ac_config_headers="$ac_config_headers config.h"
 
 
-am__api_version="1.9"
+am__api_version='1.10'
+
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
   if test -f "$ac_dir/install-sh"; then
@@ -2116,38 +2118,53 @@
 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
 fi
 
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test -z "$MKDIR_P"; then
+  if test "${ac_cv_path_mkdir+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+done
+IFS=$as_save_IFS
+
+fi
+
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
   else
-    mkdir_p='$(install_sh) -d'
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    test -d ./--version && rmdir ./--version
+    MKDIR_P="$ac_install_sh -d"
   fi
 fi
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
 
 for ac_prog in gawk mawk nawk awk
 do
@@ -2230,12 +2247,16 @@
 fi
 rmdir .tst 2>/dev/null
 
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
    { (exit 1); exit 1; }; }
+  fi
 fi
 
 # test whether we have cygpath
@@ -2249,7 +2270,7 @@
 
 
 # Define the identity of the package.
- PACKAGE='libedit-20070302'
+ PACKAGE='libedit-20071213'
  VERSION='2.10'
 
 
@@ -2278,7 +2299,7 @@
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
 
 # Installed binaries are usually stripped using `strip' when the user
 # run `make install-strip'.  However `strip' might not be the right
@@ -2382,7 +2403,7 @@
 fi
 
 fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
@@ -2604,9 +2625,7 @@
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
 fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
+ if test "x$enable_dependency_tracking" != xno; then
   AMDEP_TRUE=
   AMDEP_FALSE='#'
 else
@@ -2615,7 +2634,6 @@
 fi
 
 
-
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3602,6 +3620,7 @@
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -3631,9 +3650,7 @@
 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
-
-
-if
+ if
   test "x$enable_dependency_tracking" != xno \
   && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
   am__fastdepCC_TRUE=
@@ -4110,7 +4127,7 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | dragonfly*)
+freebsd* | kfreebsd*-gnu | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
@@ -4164,11 +4181,11 @@
   ;;
 
 # This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd* | netbsdelf*-gnu)
+netbsd*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
@@ -4285,7 +4302,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 4288 "configure"' > conftest.$ac_ext
+  echo '#line 4305 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -5509,6 +5526,7 @@
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -5538,9 +5556,7 @@
 echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
 CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
-
-
-if
+ if
   test "x$enable_dependency_tracking" != xno \
   && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
   am__fastdepCXX_TRUE=
@@ -6206,7 +6222,7 @@
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
-linux* | k*bsd*-gnu)
+linux*)
   if test "$host_cpu" = ia64; then
     symcode='[ABCDGIRSTW]'
     lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
@@ -7012,11 +7028,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7015: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7031: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7019: \$? = $ac_status" >&5
+   echo "$as_me:7035: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7174,7 +7190,7 @@
       lt_prog_compiler_static='-Bstatic'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl='-Wl,'
@@ -7280,11 +7296,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7283: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7299: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7287: \$? = $ac_status" >&5
+   echo "$as_me:7303: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7384,11 +7400,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7387: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7403: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7391: \$? = $ac_status" >&5
+   echo "$as_me:7407: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -7613,7 +7629,7 @@
       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -7639,13 +7655,12 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
-	link_all_deplibs=no
       else
 	ld_shlibs=no
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -8073,7 +8088,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -8175,7 +8190,7 @@
       link_all_deplibs=yes
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -8280,7 +8295,7 @@
  	'')
  	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
  	*)
- 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
  	esac ;;
       esac
       link_all_deplibs=yes
@@ -8665,6 +8680,18 @@
   dynamic_linker=no
   ;;
 
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -8820,7 +8847,7 @@
   ;;
 
 # This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -8849,7 +8876,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
+knetbsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -8858,7 +8885,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
+  dynamic_linker='GNU ld.so'
   ;;
 
 netbsd*)
@@ -9681,7 +9708,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 9684 "configure"
+#line 9711 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -9781,7 +9808,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 9784 "configure"
+#line 9811 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11094,7 +11121,7 @@
   freebsd-elf*)
     archive_cmds_need_lc_CXX=no
     ;;
-  freebsd* | dragonfly*)
+  freebsd* | kfreebsd*-gnu | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     ld_shlibs_CXX=yes
@@ -11253,7 +11280,7 @@
     hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
     hardcode_libdir_separator_CXX=:
     ;;
-  linux* | k*bsd*-gnu)
+  linux*)
     case $cc_basename in
       KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -11355,7 +11382,7 @@
 	;;
     esac
     ;;
-  netbsd* | netbsdelf*-gnu)
+  netbsd*)
     if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
       archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
       wlarc=
@@ -11550,7 +11577,7 @@
 	    # cannot just pass the convience library names through
 	    # without $wl.
 	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
+	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
 	    ;;
 	esac
 	link_all_deplibs_CXX=yes
@@ -11922,7 +11949,7 @@
 	    ;;
 	esac
 	;;
-      freebsd* | dragonfly*)
+      freebsd* | kfreebsd*-gnu | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
@@ -11965,7 +11992,7 @@
 	    ;;
 	esac
 	;;
-      linux* | k*bsd*-gnu)
+      linux*)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -12008,7 +12035,7 @@
 	    ;;
 	esac
 	;;
-      netbsd* | netbsdelf*-gnu)
+      netbsd*)
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
@@ -12117,11 +12144,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12120: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12147: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:12124: \$? = $ac_status" >&5
+   echo "$as_me:12151: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -12221,11 +12248,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12224: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12251: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:12228: \$? = $ac_status" >&5
+   echo "$as_me:12255: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -12293,9 +12320,6 @@
   cygwin* | mingw*)
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
-  linux* | k*bsd*-gnu)
-    link_all_deplibs_CXX=no
-  ;;
   *)
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
@@ -12575,6 +12599,18 @@
   dynamic_linker=no
   ;;
 
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -12730,7 +12766,7 @@
   ;;
 
 # This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -12759,7 +12795,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
+knetbsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -12768,7 +12804,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
+  dynamic_linker='GNU ld.so'
   ;;
 
 netbsd*)
@@ -13676,7 +13712,7 @@
       lt_prog_compiler_static_F77='-Bstatic'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl_F77='-Wl,'
@@ -13782,11 +13818,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13785: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:13821: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:13789: \$? = $ac_status" >&5
+   echo "$as_me:13825: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -13886,11 +13922,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13889: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:13925: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:13893: \$? = $ac_status" >&5
+   echo "$as_me:13929: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -14115,7 +14151,7 @@
       archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -14141,13 +14177,12 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
-	link_all_deplibs_F77=no
       else
 	ld_shlibs_F77=no
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -14555,7 +14590,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_F77='-R$libdir'
       hardcode_direct_F77=yes
@@ -14657,7 +14692,7 @@
       link_all_deplibs_F77=yes
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -14762,7 +14797,7 @@
  	'')
  	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
  	*)
- 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
  	esac ;;
       esac
       link_all_deplibs_F77=yes
@@ -15147,6 +15182,18 @@
   dynamic_linker=no
   ;;
 
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -15302,7 +15349,7 @@
   ;;
 
 # This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -15331,7 +15378,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
+knetbsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -15340,7 +15387,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
+  dynamic_linker='GNU ld.so'
   ;;
 
 netbsd*)
@@ -16073,11 +16120,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16076: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16123: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:16080: \$? = $ac_status" >&5
+   echo "$as_me:16127: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -16235,7 +16282,7 @@
       lt_prog_compiler_static_GCJ='-Bstatic'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl_GCJ='-Wl,'
@@ -16341,11 +16388,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16344: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16391: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:16348: \$? = $ac_status" >&5
+   echo "$as_me:16395: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -16445,11 +16492,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16448: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16495: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:16452: \$? = $ac_status" >&5
+   echo "$as_me:16499: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -16674,7 +16721,7 @@
       archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux* | k*bsd*-gnu)
+    linux*)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -16700,13 +16747,12 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
-	link_all_deplibs_GCJ=no
       else
 	ld_shlibs_GCJ=no
       fi
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -17134,7 +17180,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
+    freebsd* | kfreebsd*-gnu | dragonfly*)
       archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_GCJ='-R$libdir'
       hardcode_direct_GCJ=yes
@@ -17236,7 +17282,7 @@
       link_all_deplibs_GCJ=yes
       ;;
 
-    netbsd* | netbsdelf*-gnu)
+    netbsd*)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -17341,7 +17387,7 @@
  	'')
  	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
  	*)
- 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
  	esac ;;
       esac
       link_all_deplibs_GCJ=yes
@@ -17726,6 +17772,18 @@
   dynamic_linker=no
   ;;
 
+kfreebsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='GNU ld.so'
+  ;;
+
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -17881,7 +17939,7 @@
   ;;
 
 # This must be Linux ELF.
-linux* | k*bsd*-gnu)
+linux*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -17910,7 +17968,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-netbsdelf*-gnu)
+knetbsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -17919,7 +17977,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
+  dynamic_linker='GNU ld.so'
   ;;
 
 netbsd*)
@@ -19542,6 +19600,7 @@
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -19571,9 +19630,7 @@
 echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
 CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
-
-
-if
+ if
   test "x$enable_dependency_tracking" != xno \
   && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
   am__fastdepCXX_TRUE=
@@ -20327,6 +20384,7 @@
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
        $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -20356,9 +20414,7 @@
 echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
-
-
-if
+ if
   test "x$enable_dependency_tracking" != xno \
   && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
   am__fastdepCC_TRUE=
@@ -23676,6 +23732,7 @@
 ac_pwd='$ac_pwd'
 srcdir='$srcdir'
 INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -23886,6 +23943,7 @@
 INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
 INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
 INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
 CYGPATH_W!$CYGPATH_W$ac_delim
 PACKAGE!$PACKAGE$ac_delim
 VERSION!$VERSION$ac_delim
@@ -23942,7 +24000,6 @@
 am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
 am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
 CXXCPP!$CXXCPP$ac_delim
-F77!$F77$ac_delim
 _ACEOF
 
   if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -23984,6 +24041,7 @@
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   cat >conf$$subs.sed <<_ACEOF
+F77!$F77$ac_delim
 FFLAGS!$FFLAGS$ac_delim
 ac_ct_F77!$ac_ct_F77$ac_delim
 LIBTOOL!$LIBTOOL$ac_delim
@@ -23995,7 +24053,7 @@
 LTLIBOBJS!$LTLIBOBJS$ac_delim
 _ACEOF
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 9; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 10; then
     break
   elif $ac_last_try; then
     { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -24222,6 +24280,11 @@
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
   *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -24275,6 +24338,7 @@
 s&@abs_builddir@&$ac_abs_builddir&;t t
 s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
 s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
 $ac_datarootdir_hack
 " $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
 
@@ -24439,8 +24503,9 @@
   # some people rename them; so instead we look at the file content.
   # Grep'ing the first line is not enough: some people post-process
   # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+  # Grep'ing the whole file is not good either: AIX grep has a line
+  # limit of 2048, but all sed's we know have understand at least 4000.
+  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
     dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/doc/Makefile.in	Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,15 +13,11 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -54,8 +50,6 @@
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -83,6 +77,7 @@
 F77 = @F77@
 FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -96,6 +91,7 @@
 LT_VERSION = @LT_VERSION@
 MAKEINFO = @MAKEINFO@
 MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
 NROFF = @NROFF@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
@@ -110,13 +106,13 @@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -128,6 +124,7 @@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -155,8 +152,11 @@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 EL_MANS = editline.3 editrc.5
 man_MANS = $(EL_MANS)
 EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
@@ -205,13 +205,9 @@
 
 clean-libtool:
 	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
 install-man3: $(man3_MANS) $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man3dir)" || $(mkdir_p) "$(DESTDIR)$(man3dir)"
+	test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
 	@list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \
 	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
 	for i in $$l2; do \
@@ -256,7 +252,7 @@
 	done
 install-man5: $(man5_MANS) $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)"
+	test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
 	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
 	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
 	for i in $$l2; do \
@@ -307,22 +303,21 @@
 
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -338,7 +333,7 @@
 all-am: Makefile $(MANS)
 installdirs:
 	for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -371,7 +366,7 @@
 
 distclean: distclean-am
 	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-libtool
+distclean-am: clean-am distclean-generic
 
 dvi: dvi-am
 
@@ -387,12 +382,20 @@
 	@$(NORMAL_INSTALL)
 	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
 
+install-dvi: install-dvi-am
+
 install-exec-am:
 
+install-html: install-html-am
+
 install-info: install-info-am
 
 install-man: install-man3 install-man5
 
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -411,21 +414,24 @@
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-local uninstall-man
+uninstall-am: uninstall-local uninstall-man
 
 uninstall-man: uninstall-man3 uninstall-man5
 
+.MAKE: install-am install-data-am install-strip
+
 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 	distclean distclean-generic distclean-libtool distdir dvi \
 	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-data-hook install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-man3 install-man5 install-strip installcheck \
+	install-data install-data-am install-data-hook install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man3 install-man5 install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-info-am uninstall-local uninstall-man uninstall-man3 \
-	uninstall-man5
+	uninstall-local uninstall-man uninstall-man3 uninstall-man5
 
 
 install-data-hook: $(EL_MAN_LINKS)

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/examples/Makefile.in	Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +14,11 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -56,17 +52,18 @@
 test_OBJECTS = $(am_test_OBJECTS)
 test_LDADD = $(LDADD)
 test_DEPENDENCIES = $(top_builddir)/src/libedit.la
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
 SOURCES = $(fileman_SOURCES) $(test_SOURCES)
 DIST_SOURCES = $(fileman_SOURCES) $(test_SOURCES)
 ETAGS = etags
@@ -74,8 +71,6 @@
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -103,6 +98,7 @@
 F77 = @F77@
 FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -116,6 +112,7 @@
 LT_VERSION = @LT_VERSION@
 MAKEINFO = @MAKEINFO@
 MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
 NROFF = @NROFF@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
@@ -130,13 +127,13 @@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -148,6 +145,7 @@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -175,8 +173,11 @@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 LDADD = $(top_builddir)/src/libedit.la
 AM_CFLAGS = -I$(top_srcdir)/src
 test_SOURCES = test.c
@@ -223,10 +224,10 @@
 	done
 fileman$(EXEEXT): $(fileman_OBJECTS) $(fileman_DEPENDENCIES) 
 	@rm -f fileman$(EXEEXT)
-	$(LINK) $(fileman_LDFLAGS) $(fileman_OBJECTS) $(fileman_LDADD) $(LIBS)
+	$(LINK) $(fileman_OBJECTS) $(fileman_LDADD) $(LIBS)
 test$(EXEEXT): $(test_OBJECTS) $(test_DEPENDENCIES) 
 	@rm -f test$(EXEEXT)
-	$(LINK) $(test_LDFLAGS) $(test_OBJECTS) $(test_LDADD) $(LIBS)
+	$(LINK) $(test_OBJECTS) $(test_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -238,22 +239,22 @@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test.Po@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -264,10 +265,6 @@
 clean-libtool:
 	-rm -rf .libs _libs
 
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -317,22 +314,21 @@
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -380,7 +376,7 @@
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-libtool distclean-tags
+	distclean-tags
 
 dvi: dvi-am
 
@@ -394,12 +390,20 @@
 
 install-data-am:
 
+install-dvi: install-dvi-am
+
 install-exec-am:
 
+install-html: install-html-am
+
 install-info: install-info-am
 
 install-man:
 
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -420,19 +424,22 @@
 
 ps-am:
 
-uninstall-am: uninstall-info-am
+uninstall-am:
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libtool clean-noinstPROGRAMS ctags distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \
 	maintainer-clean maintainer-clean-generic mostlyclean \
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am \
-	uninstall-info-am
+	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/ltmain.sh	Thu Dec 13 12:16:17 2007
@@ -1,7 +1,7 @@
 # ltmain.sh - Provide generalized library-building support services.
 # NOTE: Changing this file will not affect anything until you rerun configure.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
 # Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
@@ -17,7 +17,7 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -43,9 +43,14 @@
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.6
-TIMESTAMP=" (1.1220.2.95 2004/04/11 05:50:42) Debian$Rev: 220 $"
+VERSION=1.5.22
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
 
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+  setopt NO_GLOB_SUBST
+fi
 
 # Check that we have a working $echo.
 if test "X$1" = X--no-reexec; then
@@ -83,14 +88,15 @@
 Xsed="${SED}"' -e 1s/^X//'
 sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
 # test EBCDIC or ASCII
-case `echo A|tr A '\301'` in
- A) # EBCDIC based system
-  SP2NL="tr '\100' '\n'"
-  NL2SP="tr '\r\n' '\100\100'"
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
   ;;
- *) # Assume ASCII based system
-  SP2NL="tr '\040' '\012'"
-  NL2SP="tr '\015\012' '\040\040'"
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
   ;;
 esac
 
@@ -107,8 +113,9 @@
 fi
 
 # Make sure IFS has a sensible default
-: ${IFS=" 	
-"}
+lt_nl='
+'
+IFS=" 	$lt_nl"
 
 if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
   $echo "$modename: not configured to build any kind of library" 1>&2
@@ -125,6 +132,8 @@
 show="$echo"
 show_help=
 execute_dlfiles=
+duplicate_deps=no
+preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
 
@@ -132,13 +141,51 @@
 # Shell function definitions:
 # This seems to be the best place for them
 
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+	# Failing that, at least try and use $RANDOM to avoid a race
+	my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+	save_mktempdir_umask=`umask`
+	umask 0077
+	$mkdir "$my_tmpdir"
+	umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+	exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-func_win32_libid () {
+func_win32_libid ()
+{
   win32_libid_type="unknown"
   win32_fileres=`file -L $1 2>/dev/null`
   case $win32_fileres in
@@ -149,12 +196,11 @@
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
       $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
       win32_nmres=`eval $NM -f posix -A $1 | \
-	sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
-      if test "X$win32_nmres" = "Ximport" ; then
-        win32_libid_type="x86 archive import"
-      else
-        win32_libid_type="x86 archive static"
-      fi
+	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
     fi
     ;;
   *DLL*)
@@ -178,7 +224,8 @@
 # Only attempt this if the compiler in the base compile
 # command doesn't match the default compiler.
 # arg is usually of the form 'gcc ...'
-func_infer_tag () {
+func_infer_tag ()
+{
     if test -n "$available_tags" && test -z "$tagname"; then
       CC_quoted=
       for arg in $CC; do
@@ -235,12 +282,116 @@
       esac
     fi
 }
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xdir="$my_gentop/$my_xlib"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $exit_status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    ${rm}r unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	fi # $run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
 # End of Shell function definitions
 #####################################
 
 # Darwin sucks
 eval std_shrext=\"$shrext_cmds\"
 
+disable_libs=no
+
 # Parse our command line options once, thoroughly.
 while test "$#" -gt 0
 do
@@ -305,10 +456,10 @@
   --version)
     $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
     $echo
-    $echo "Copyright (C) 2003  Free Software Foundation, Inc."
+    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
     $echo "This is free software; see the source for copying conditions.  There is NO"
     $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $EXIT_SUCCESS
+    exit $?
     ;;
 
   --config)
@@ -317,7 +468,7 @@
     for tagname in $taglist; do
       ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
     done
-    exit $EXIT_SUCCESS
+    exit $?
     ;;
 
   --debug)
@@ -342,7 +493,7 @@
     else
       $echo "disable static libraries"
     fi
-    exit $EXIT_SUCCESS
+    exit $?
     ;;
 
   --finish) mode="finish" ;;
@@ -357,7 +508,11 @@
     preserve_args="$preserve_args $arg"
     ;;
 
-  --tag) prevopt="--tag" prev=tag ;;
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
   --tag=*)
     set tag "$optarg" ${1+"$@"}
     shift
@@ -389,6 +544,18 @@
   exit $EXIT_FAILURE
 fi
 
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
 # If this variable is set in any of the actions, the command in it
 # will be execed at the end.  This prevents here-documents from being
 # left over by shells.
@@ -399,7 +566,7 @@
   # Infer the operation mode.
   if test -z "$mode"; then
     $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
     case $nonopt in
     *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
       mode=link
@@ -465,7 +632,7 @@
 
     for arg
     do
-      case "$arg_mode" in
+      case $arg_mode in
       arg  )
 	# do not "continue".  Instead, add this to base_compile
 	lastarg="$arg"
@@ -547,7 +714,10 @@
       case $lastarg in
       # Double-quote args containing other shell metacharacters.
       # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, so we specify it separately.
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
       *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	lastarg="\"$lastarg\""
 	;;
@@ -621,6 +791,14 @@
       esac
     done
 
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
     objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
     xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
     if test "X$xdir" = "X$obj"; then
@@ -693,12 +871,17 @@
 	$run $rm $removelist
 	exit $EXIT_FAILURE
       fi
-      $echo $srcfile > "$lockfile"
+      $echo "$srcfile" > "$lockfile"
     fi
 
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
 
     $run $rm "$libobj" "${libobj}T"
 
@@ -720,18 +903,18 @@
       fbsd_hideous_sh_bug=$base_compile
 
       if test "$pic_mode" != no; then
-	command="$base_compile $srcfile $pic_flag"
+	command="$base_compile $qsrcfile $pic_flag"
       else
 	# Don't build PIC code
-	command="$base_compile $srcfile"
+	command="$base_compile $qsrcfile"
       fi
 
       if test ! -d "${xdir}$objdir"; then
 	$show "$mkdir ${xdir}$objdir"
 	$run $mkdir ${xdir}$objdir
-	status=$?
-	if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $status
+	exit_status=$?
+	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $exit_status
 	fi
       fi
 
@@ -803,9 +986,9 @@
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code
-	command="$base_compile $srcfile"
+	command="$base_compile $qsrcfile"
       else
-	command="$base_compile $srcfile $pic_flag"
+	command="$base_compile $qsrcfile $pic_flag"
       fi
       if test "$compiler_c_o" = yes; then
 	command="$command -o $obj"
@@ -934,6 +1117,7 @@
     no_install=no
     objs=
     non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
     precious_files_regex=
     prefer_static_libs=no
     preload=no
@@ -962,14 +1146,15 @@
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
+	  prefer_static_libs=yes
 	else
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
+	  prefer_static_libs=built
 	fi
 	build_libtool_libs=no
 	build_old_libs=yes
-	prefer_static_libs=yes
 	break
 	;;
       esac
@@ -1144,6 +1329,11 @@
 		  if test -z "$pic_object" || test "$pic_object" = none ; then
 		    arg="$non_pic_object"
 		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
 		fi
 	      else
 		# Only an error if not doing a dry-run.
@@ -1227,6 +1417,13 @@
 	  prev=
 	  continue
 	  ;;
+	darwin_framework|darwin_framework_skip)
+	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  prev=
+	  continue
+	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
@@ -1285,6 +1482,18 @@
 	continue
 	;;
 
+      -framework|-arch|-isysroot)
+	case " $CC " in
+	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+		prev=darwin_framework_skip ;;
+	  *) compiler_flags="$compiler_flags $arg"
+	     prev=darwin_framework ;;
+	esac
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
       -inst-prefix-dir)
 	prev=inst_prefix
 	continue
@@ -1311,7 +1520,8 @@
 	  absdir=`cd "$dir" && pwd`
 	  if test -z "$absdir"; then
 	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    exit $EXIT_FAILURE
+	    absdir="$dir"
+	    notinst_path="$notinst_path $dir"
 	  fi
 	  dir="$absdir"
 	  ;;
@@ -1325,10 +1535,15 @@
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
 	  ;;
 	esac
 	continue
@@ -1337,15 +1552,15 @@
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
-	  *-*-mingw* | *-*-os2*)
+	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
 	    test "X$arg" = "X-lc" && continue
 	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
@@ -1353,10 +1568,19 @@
 	    # Rhapsody C and math libraries are in the System framework
 	    deplibs="$deplibs -framework System"
 	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
 	  esac
 	elif test "X$arg" = "X-lc_r"; then
 	 case $host in
-	 *-*-openbsd* | *-*-freebsd*)
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	   # Do not include libc_r directly, use -pthread flag.
 	   continue
 	   ;;
@@ -1366,8 +1590,20 @@
 	continue
 	;;
 
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-	deplibs="$deplibs $arg"
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
 	continue
 	;;
 
@@ -1376,13 +1612,19 @@
 	continue
 	;;
 
-      # gcc -m* arguments should be passed to the linker via $compiler_flags
-      # in order to pass architecture information to the linker
-      # (e.g. 32 vs 64-bit).  This may also be accomplished via -Wl,-mfoo
-      # but this is not reliable with gcc because gcc may use -mfoo to
-      # select a different linker, different libraries, etc, while
-      # -Wl,-mfoo simply passes -mfoo to the linker.
-      -m*)
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -pg pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+      -t[45]*|-txscale*|@*)
+
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
@@ -1393,9 +1635,7 @@
 	esac
         compile_command="$compile_command $arg"
         finalize_command="$finalize_command $arg"
-        if test "$with_gcc" = "yes" ; then
-          compiler_flags="$compiler_flags $arg"
-        fi
+        compiler_flags="$compiler_flags $arg"
         continue
         ;;
 
@@ -1633,6 +1873,11 @@
 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
 	  fi
 	else
 	  # Only an error if not doing a dry-run.
@@ -1738,9 +1983,9 @@
     if test ! -d "$output_objdir"; then
       $show "$mkdir $output_objdir"
       $run $mkdir $output_objdir
-      status=$?
-      if test "$status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $status
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+	exit $exit_status
       fi
     fi
 
@@ -1803,7 +2048,6 @@
     newlib_search_path=
     need_relink=no # whether we're linking any uninstalled libtool libraries
     notinst_deplibs= # not-installed libtool libraries
-    notinst_path= # paths that contain not-installed libtool libraries
     case $linkmode in
     lib)
 	passes="conv link"
@@ -1838,10 +2082,7 @@
 	case $pass in
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;
-	link)
-	  libs="$deplibs %DEPLIBS%"
-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-	  ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
       fi
       if test "$pass" = dlopen; then
@@ -1858,7 +2099,7 @@
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
-	    deplibs="$deplib $deplibs"
+	    compiler_flags="$compiler_flags $deplib"
 	  fi
 	  continue
 	  ;;
@@ -1977,7 +2218,22 @@
 	  fi
 	  case $linkmode in
 	  lib)
-	    if test "$deplibs_check_method" != pass_all; then
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
 	      $echo
 	      $echo "*** Warning: Trying to link with static lib archive $deplib."
 	      $echo "*** I have the capability to make that library automatically link in when"
@@ -2027,7 +2283,7 @@
 	esac # case $deplib
 	if test "$found" = yes || test -f "$lib"; then :
 	else
-	  $echo "$modename: cannot find the library \`$lib'" 1>&2
+	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
 	  exit $EXIT_FAILURE
 	fi
 
@@ -2051,6 +2307,8 @@
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
 	shouldnotlink=no
+	avoidtemprpath=
+
 
 	# Read the .la file
 	case $lib in
@@ -2149,11 +2407,19 @@
 	    dir="$libdir"
 	    absdir="$libdir"
 	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
 	else
-	  dir="$ladir/$objdir"
-	  absdir="$abs_ladir/$objdir"
-	  # Remove this search path later
-	  notinst_path="$notinst_path $abs_ladir"
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
 	fi # $installed = yes
 	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
 
@@ -2226,12 +2492,12 @@
 	  if test -n "$library_names" &&
 	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
 	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var"; then
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
 	      case "$temp_rpath " in
 	      *" $dir "*) ;;
 	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $dir" ;;
+	      *) temp_rpath="$temp_rpath $absdir" ;;
 	      esac
 	    fi
 
@@ -2268,8 +2534,12 @@
 	fi
 
 	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	  use_static_libs=no
+	fi
 	if test -n "$library_names" &&
-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
 	  if test "$installed" = no; then
 	    notinst_deplibs="$notinst_deplibs $lib"
 	    need_relink=yes
@@ -2382,11 +2652,15 @@
 	      if test "$hardcode_direct" = no; then
 		add="$dir/$linklib"
 		case $host in
-		  *-*-sco3.2v5* ) add_dir="-L$dir" ;;
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
 		    # if the lib is a module then we can not link against
 		    # it, someone is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
+		    if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
 		      $echo "** Warning, lib $linklib is a module, not a shared library"
 		      if test -z "$old_library" ; then
 		        $echo
@@ -2417,7 +2691,7 @@
 		add_dir="-L$dir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
-		  case "$libdir" in
+		  case $libdir in
 		    [\\/]*)
 		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		      ;;
@@ -2490,7 +2764,7 @@
 	      add_dir="-L$libdir"
 	      # Try looking first in the location we're being installed to.
 	      if test -n "$inst_prefix_dir"; then
-		case "$libdir" in
+		case $libdir in
 		  [\\/]*)
 		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
 		    ;;
@@ -2551,8 +2825,6 @@
 	      fi
 	    fi
 	  else
-	    convenience="$convenience $dir/$old_library"
-	    old_convenience="$old_convenience $dir/$old_library"
 	    deplibs="$dir/$old_library $deplibs"
 	    link_static=yes
 	  fi
@@ -2670,12 +2942,12 @@
 	      *) continue ;;
 	      esac
 	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
 	      esac
 	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$deplibs $path" ;;
+	      *" $depdepl "*) ;;
+	      *) deplibs="$depdepl $deplibs" ;;
 	      esac
 	    done
 	  fi # link_all_deplibs != no
@@ -2929,11 +3201,6 @@
 	    age="$number_minor"
 	    revision="$number_minor"
 	    ;;
-	  *)
-	    $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	    $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
 	  esac
 	  ;;
 	no)
@@ -2945,27 +3212,27 @@
 
 	# Check that each of the things are valid numbers.
 	case $current in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
 	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	case $revision in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
 	  exit $EXIT_FAILURE
 	  ;;
 	esac
 
 	case $age in
-	0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
 	  exit $EXIT_FAILURE
 	  ;;
@@ -2991,7 +3258,7 @@
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
 	  minor_current=`expr $current + 1`
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
 	  ;;
 
 	freebsd-aout)
@@ -3144,9 +3411,9 @@
 
       # Eliminate all temporary directories.
       for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
-	deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
       done
 
       if test -n "$xrpath"; then
@@ -3197,9 +3464,14 @@
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
 	    ;;
-	  *-*-openbsd* | *-*-freebsd*)
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
 	    ;;
  	  *)
 	    # Add libc to deplibs on all other systems if necessary.
@@ -3243,11 +3515,11 @@
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-	  $LTCC -o conftest conftest.c $deplibs
+	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
 	  if test "$?" -eq 0 ; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
+	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" -ne "0"; then
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3284,11 +3556,11 @@
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name="`expr $i : '-l\(.*\)'`"
+	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		$LTCC -o conftest conftest.c $i
+		$LTCC $LTCFLAGS -o conftest conftest.c $i
 		# Did it work?
 		if test "$?" -eq 0 ; then
 		  ldd_output=`ldd conftest`
@@ -3336,7 +3608,7 @@
 	  set dummy $deplibs_check_method
 	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    name=`expr $a_deplib : '-l\(.*\)'`
 	    # If $name is empty we are operating on a -L argument.
             if test "$name" != "" && test  "$name" != "0"; then
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3405,7 +3677,7 @@
 	  set dummy $deplibs_check_method
 	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    name=`expr $a_deplib : '-l\(.*\)'`
 	    # If $name is empty we are operating on a -L argument.
 	    if test -n "$name" && test "$name" != "0"; then
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
@@ -3535,6 +3807,35 @@
 	deplibs=$newdeplibs
       fi
 
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+
       # All the library-specific variables (install_libdir is set above).
       library_names=
       old_library=
@@ -3618,6 +3919,7 @@
 	fi
 
 	lib="$output_objdir/$realname"
+	linknames=
 	for link
 	do
 	  linknames="$linknames $link"
@@ -3646,6 +3948,9 @@
 	        # The command line is too long to execute in one step.
 	        $show "using reloadable object file for export list..."
 	        skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
 	      fi
 	    done
 	    IFS="$save_ifs"
@@ -3679,67 +3984,13 @@
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
 	  else
 	    gentop="$output_objdir/${outputname}x"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$gentop"; then
-	      exit $status
-	    fi
 	    generated="$generated $gentop"
 
-	    for xlib in $convenience; do
-	      # Extract the objects.
-	      case $xlib in
-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	      *) xabs=`pwd`"/$xlib" ;;
-	      esac
-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	      xdir="$gentop/$xlib"
-
-	      $show "${rm}r $xdir"
-	      $run ${rm}r "$xdir"
-	      $show "$mkdir $xdir"
-	      $run $mkdir "$xdir"
-	      status=$?
-	      if test "$status" -ne 0 && test ! -d "$xdir"; then
-		exit $status
-	      fi
-	      # We will extract separately just the conflicting names and we will no
-	      # longer touch any unique names. It is faster to leave these extract
-	      # automatically by $AR in one run.
-	      $show "(cd $xdir && $AR x $xabs)"
-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	      if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-		:
-	      else
-		$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-		$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-		$AR t "$xabs" | sort | uniq -cd | while read -r count name
-		do
-		  i=1
-		  while test "$i" -le "$count"
-		  do
-		   # Put our $i before any first dot (extension)
-		   # Never overwrite any file
-		   name_to="$name"
-		   while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-		   do
-		     name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-		   done
-		   $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-		   $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-		   i=`expr $i + 1`
-		  done
-		done
-	      fi
-
-	      libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	    done
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
 	  fi
 	fi
-
+	
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
@@ -3769,7 +4020,8 @@
 	  fi
 	fi
 
-	if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
+	if test "X$skipped_export" != "X:" &&
+	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
@@ -3788,6 +4040,7 @@
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -3797,13 +4050,13 @@
 	  delfiles=
 	  last_robj=
 	  k=1
-	  output=$output_objdir/$save_output-${k}.$objext
+	  output=$output_objdir/$output_la-${k}.$objext
 	  # Loop over the list of objects to be linked.
 	  for obj in $save_libobjs
 	  do
 	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
 	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*"` &&
+	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 		 test "$len" -le "$max_cmd_len"; }; then
 	      objlist="$objlist $obj"
 	    else
@@ -3817,9 +4070,9 @@
 		# the last one created.
 		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
 	      fi
-	      last_robj=$output_objdir/$save_output-${k}.$objext
+	      last_robj=$output_objdir/$output_la-${k}.$objext
 	      k=`expr $k + 1`
-	      output=$output_objdir/$save_output-${k}.$objext
+	      output=$output_objdir/$output_la-${k}.$objext
 	      objlist=$obj
 	      len=1
 	    fi
@@ -3839,13 +4092,13 @@
 	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
           fi
 
-	  # Set up a command to remove the reloadale object files
+	  # Set up a command to remove the reloadable object files
 	  # after they are used.
 	  i=0
 	  while test "$i" -lt "$k"
 	  do
 	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
 	  done
 
 	  $echo "creating a temporary reloadable object file: $output"
@@ -3893,13 +4146,30 @@
 	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"
 	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
+	  $run eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	    fi
+
+	    exit $lt_exit
+	  }
 	done
 	IFS="$save_ifs"
 
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
 	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      $show "${rm}r $gentop"
+	      $run ${rm}r "$gentop"
+	    fi
+	  fi
+
 	  exit $EXIT_SUCCESS
 	fi
 
@@ -3977,64 +4247,10 @@
 	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
 	else
 	  gentop="$output_objdir/${obj}x"
-	  $show "${rm}r $gentop"
-	  $run ${rm}r "$gentop"
-	  $show "$mkdir $gentop"
-	  $run $mkdir "$gentop"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$gentop"; then
-	    exit $status
-	  fi
 	  generated="$generated $gentop"
 
-	  for xlib in $convenience; do
-	    # Extract the objects.
-	    case $xlib in
-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	    *) xabs=`pwd`"/$xlib" ;;
-	    esac
-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	    xdir="$gentop/$xlib"
-
-	    $show "${rm}r $xdir"
-	    $run ${rm}r "$xdir"
-	    $show "$mkdir $xdir"
-	    $run $mkdir "$xdir"
-	    status=$?
-	    if test "$status" -ne 0 && test ! -d "$xdir"; then
-	      exit $status
-	    fi
-	    # We will extract separately just the conflicting names and we will no
-	    # longer touch any unique names. It is faster to leave these extract
-	    # automatically by $AR in one run.
-	    $show "(cd $xdir && $AR x $xabs)"
-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	    if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-	      :
-	    else
-	      $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-	      $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-	      $AR t "$xabs" | sort | uniq -cd | while read -r count name
-	      do
-		i=1
-		while test "$i" -le "$count"
-		do
-		 # Put our $i before any first dot (extension)
-		 # Never overwrite any file
-		 name_to="$name"
-		 while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-		 do
-		   name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-		 done
-		 $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-		 $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-		 i=`expr $i + 1`
-		done
-	      done
-	    fi
-
-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-	  done
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
       fi
 
@@ -4135,6 +4351,35 @@
         ;;
       esac
 
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
       compile_command="$compile_command $compile_deplibs"
       finalize_command="$finalize_command $finalize_deplibs"
 
@@ -4179,10 +4424,15 @@
 	fi
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
 	  ;;
 	esac
       done
@@ -4296,13 +4546,25 @@
 
 	    # Prepare the list of exported symbols
 	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$output.exp"
+	      export_symbols="$output_objdir/$outputname.exp"
 	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    else
-	      $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
 	    fi
 	  fi
 
@@ -4353,7 +4615,26 @@
 #endif
 
 /* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
 const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
   const char *name;
   lt_ptr address;
 }
@@ -4400,16 +4681,29 @@
 	  esac
 
 	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
 
 	  # Clean up the generated files.
 	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
 	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
 
 	  # Transform the symbol file into the correct name.
-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+            else
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            ;;
+          esac
 	  ;;
 	*)
 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
@@ -4434,7 +4728,7 @@
 	# We have no uninstalled library dependencies, so finalize right now.
 	$show "$link_command"
 	$run eval "$link_command"
-	status=$?
+	exit_status=$?
 
 	# Delete the generated files.
 	if test -n "$dlsyms"; then
@@ -4442,7 +4736,7 @@
 	  $run $rm "$output_objdir/${outputname}S.${objext}"
 	fi
 
-	exit $status
+	exit $exit_status
       fi
 
       if test -n "$shlibpath_var"; then
@@ -4582,10 +4876,12 @@
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-	    cwrappersource=`$echo ${objdir}/lt-${output}.c`
-	    cwrapper=`$echo ${output}.exe`
-	    $rm $cwrappersource $cwrapper
-	    trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
 
 	    cat > $cwrappersource <<EOF
 
@@ -4610,6 +4906,9 @@
 #include <malloc.h>
 #include <stdarg.h>
 #include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
 
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
@@ -4620,15 +4919,19 @@
 #endif
 
 #ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
 #endif
 
 #if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
   defined (__OS2__)
-#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
-#define DIR_SEPARATOR_2 '\\'
-#endif
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
 #endif
 
 #ifndef DIR_SEPARATOR_2
@@ -4638,17 +4941,32 @@
         (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
 #endif /* DIR_SEPARATOR_2 */
 
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
 #define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
 #define XFREE(stale) do { \
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
 const char *program_name = NULL;
 
 void * xmalloc (size_t num);
 char * xstrdup (const char *string);
-char * basename (const char *name);
-char * fnqualify(const char *path);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
 char * strendzap(char *str, const char *pat);
 void lt_fatal (const char *message, ...);
 
@@ -4658,29 +4976,51 @@
   char **newargz;
   int i;
 
-  program_name = (char *) xstrdup ((char *) basename (argv[0]));
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
   newargz = XMALLOC(char *, argc+2);
 EOF
 
-	    cat >> $cwrappersource <<EOF
-  newargz[0] = "$SHELL";
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
 EOF
 
-	    cat >> $cwrappersource <<"EOF"
-  newargz[1] = fnqualify(argv[0]);
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
   /* we know the script has the same name, without the .exe */
   /* so make sure newargz[1] doesn't end in .exe */
   strendzap(newargz[1],".exe");
   for (i = 1; i < argc; i++)
     newargz[i+1] = xstrdup(argv[i]);
   newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
 EOF
 
-	    cat >> $cwrappersource <<EOF
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
   execv("$SHELL",newargz);
 EOF
+              ;;
+            esac
 
-	    cat >> $cwrappersource <<"EOF"
+            cat >> $cwrappersource <<"EOF"
+  return 127;
 }
 
 void *
@@ -4700,48 +5040,148 @@
 ;
 }
 
-char *
-basename (const char *name)
+const char *
+base_name (const char *name)
 {
   const char *base;
 
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
   /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha (name[0]) && name[1] == ':')
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
     name += 2;
 #endif
 
   for (base = name; *name; name++)
     if (IS_DIR_SEPARATOR (*name))
       base = name + 1;
-  return (char *) base;
+  return base;
+}
+
+int
+check_executable(const char * path)
+{
+  struct stat st;
+
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
 }
 
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
 char *
-fnqualify(const char *path)
+find_executable (const char* wrapper)
 {
-  size_t size;
-  char *p;
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
   char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
 
-  assert(path != NULL);
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
 
-  /* Is it qualified already? */
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
 #if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha (path[0]) && path[1] == ':')
-    return xstrdup (path);
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
 #endif
-  if (IS_DIR_SEPARATOR (path[0]))
-    return xstrdup (path);
 
-  /* prepend the current directory */
-  /* doesn't handle '~' */
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
     lt_fatal ("getcwd failed");
-  size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
-  p = XMALLOC(char, size);
-  sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
-  return p;
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
 }
 
 char *
@@ -4785,16 +5225,16 @@
   va_end (ap);
 }
 EOF
-	  # we should really use a build-platform specific compiler
-	  # here, but OTOH, the wrappers (shell script and this C one)
-	  # are only useful if you want to execute the "real" binary.
-	  # Since the "real" binary is built for $host, then this
-	  # wrapper might as well be built for $host, too.
-	  $run $LTCC -s -o $cwrapper $cwrappersource
-	  ;;
-	esac
-	$rm $output
-	trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
 
 	$echo > $output "\
 #! $SHELL
@@ -4815,7 +5255,7 @@
 
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 relink_command=\"$relink_command\"
 
@@ -4944,13 +5384,13 @@
 	# Backslashes separate directories on plain windows
 	*-*-mingw | *-*-os2*)
 	  $echo >> $output "\
-      exec \$progdir\\\\\$program \${1+\"\$@\"}
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
 "
 	  ;;
 
 	*)
 	  $echo >> $output "\
-      exec \$progdir/\$program \${1+\"\$@\"}
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
 "
 	  ;;
 	esac
@@ -4960,7 +5400,7 @@
     fi
   else
     # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$echo \"This script is just a wrapper for \$program.\" 1>&2
     $echo \"See the $PACKAGE documentation for more information.\" 1>&2
     exit $EXIT_FAILURE
@@ -4992,71 +5432,73 @@
 
       if test -n "$addlibs"; then
 	gentop="$output_objdir/${outputname}x"
-	$show "${rm}r $gentop"
-	$run ${rm}r "$gentop"
-	$show "$mkdir $gentop"
-	$run $mkdir "$gentop"
-	status=$?
-	if test "$status" -ne 0 && test ! -d "$gentop"; then
-	  exit $status
-	fi
 	generated="$generated $gentop"
 
-	# Add in members from convenience archives.
-	for xlib in $addlibs; do
-	  # Extract the objects.
-	  case $xlib in
-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
-	  *) xabs=`pwd`"/$xlib" ;;
-	  esac
-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
-	  xdir="$gentop/$xlib"
-
-	  $show "${rm}r $xdir"
-	  $run ${rm}r "$xdir"
-	  $show "$mkdir $xdir"
-	  $run $mkdir "$xdir"
-	  status=$?
-	  if test "$status" -ne 0 && test ! -d "$xdir"; then
-	    exit $status
-	  fi
-	  # We will extract separately just the conflicting names and we will no
-	  # longer touch any unique names. It is faster to leave these extract
-	  # automatically by $AR in one run.
-	  $show "(cd $xdir && $AR x $xabs)"
-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
-	  if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
-	    :
-	  else
-	    $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
-	    $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
-	    $AR t "$xabs" | sort | uniq -cd | while read -r count name
-	    do
-	      i=1
-	      while test "$i" -le "$count"
-	      do
-	       # Put our $i before any first dot (extension)
-	       # Never overwrite any file
-	       name_to="$name"
-	       while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
-	       do
-		 name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
-	       done
-	       $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
-	       $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
-	       i=`expr $i + 1`
-	      done
-	    done
-	  fi
-
-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
-	done
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
       fi
 
       # Do each command in the archive commands.
       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
        cmds=$old_archive_from_new_cmds
       else
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $echo "copying selected object files to avoid basename conflicts..."
+
+	  if test -z "$gentop"; then
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "$mkdir $gentop"
+	    $run $mkdir "$gentop"
+	    exit_status=$?
+	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+	      exit $exit_status
+	    fi
+	  fi
+
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		counter=`expr $counter + 1`
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      $run ln "$obj" "$gentop/$newobj" ||
+	      $run cp "$obj" "$gentop/$newobj"
+	      oldobjs="$oldobjs $gentop/$newobj"
+	      ;;
+	    *) oldobjs="$oldobjs $obj" ;;
+	    esac
+	  done
+	fi
+
 	eval cmds=\"$old_archive_cmds\"
 
 	if len=`expr "X$cmds" : ".*"` &&
@@ -5070,20 +5512,7 @@
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs
-	  # GNU ar 2.10+ was changed to match POSIX; thus no paths are
-	  # encoded into archives.  This makes 'ar r' malfunction in
-	  # this piecewise linking case whenever conflicting object
-	  # names appear in distinct ar calls; check, warn and compensate.
-	    if (for obj in $save_oldobjs
-	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	    :
-	  else
-	    $echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
-	    $echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
-	    AR_FLAGS=cq
-	  fi
+
 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
@@ -5094,7 +5523,7 @@
 	    oldobjs="$objlist $obj"
 	    objlist="$objlist $obj"
 	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*"` &&
+	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
 	       test "$len" -le "$max_cmd_len"; then
 	      :
 	    else
@@ -5291,11 +5720,11 @@
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
+       $echo "X$nonopt" | grep shtool > /dev/null; then
       # Aesthetically quote it.
       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -5304,14 +5733,14 @@
       shift
     else
       install_prog=
-      arg="$nonopt"
+      arg=$nonopt
     fi
 
     # The real first argument should be the name of the installation program.
     # Aesthetically quote it.
     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
     case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
       arg="\"$arg\""
       ;;
     esac
@@ -5329,28 +5758,31 @@
     do
       if test -n "$dest"; then
 	files="$files $dest"
-	dest="$arg"
+	dest=$arg
 	continue
       fi
 
       case $arg in
       -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
+      -f) 
+      	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o) prev=$arg ;;
       -s)
 	stripme=" -s"
 	continue
 	;;
-      -*) ;;
-
+      -*)
+	;;
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
 	  prev=
 	else
-	  dest="$arg"
+	  dest=$arg
 	  continue
 	fi
 	;;
@@ -5359,7 +5791,7 @@
       # Aesthetically quote the argument.
       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
       case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
 	arg="\"$arg\""
 	;;
       esac
@@ -5528,11 +5960,14 @@
 
 	  if test "$#" -gt 0; then
 	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
 	    for linkname
 	    do
 	      if test "$linkname" != "$realname"; then
-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
 	      fi
 	    done
 	  fi
@@ -5545,7 +5980,16 @@
 	    IFS="$save_ifs"
 	    eval cmd=\"$cmd\"
 	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
+	    $run eval "$cmd" || {
+	      lt_exit=$?
+
+	      # Restore the uninstalled library and exit
+	      if test "$mode" = relink; then
+		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      fi
+
+	      exit $lt_exit
+	    }
 	  done
 	  IFS="$save_ifs"
 	fi
@@ -5639,17 +6083,15 @@
 	  notinst_deplibs=
 	  relink_command=
 
-	  # To insure that "foo" is sourced, and not "foo.exe",
-	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
-	  # which disallows the automatic-append-.exe behavior.
-	  case $build in
-	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
-	  *) wrapperdot=${wrapper} ;;
-	  esac
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
 	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . ${wrapperdot} ;;
-	  *) . ./${wrapperdot} ;;
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
 	  esac
 
 	  # Check the variables that should have been set.
@@ -5677,34 +6119,21 @@
 	  done
 
 	  relink_command=
-	  # To insure that "foo" is sourced, and not "foo.exe",
-	  # finese the cygwin/MSYS system by explicitly sourcing "foo."
-	  # which disallows the automatic-append-.exe behavior.
-	  case $build in
-	  *cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
-	  *) wrapperdot=${wrapper} ;;
-	  esac
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
 	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . ${wrapperdot} ;;
-	  *) . ./${wrapperdot} ;;
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
 	  esac
 
 	  outputname=
 	  if test "$fast_install" = no && test -n "$relink_command"; then
 	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir="/tmp"
-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
-	      tmpdir="$tmpdir/libtool-$$"
-	      save_umask=`umask`
-	      umask 0077
-	      if $mkdir "$tmpdir"; then
-	        umask $save_umask
-	      else
-	        umask $save_umask
-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
-		continue
-	      fi
+	      tmpdir=`func_mktempdir`
 	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
@@ -5728,7 +6157,7 @@
 	fi
 
 	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyways
+	# one anyway 
 	case $install_prog,$host in
 	*/usr/bin/install*,*cygwin*)
 	  case $file:$destfile in
@@ -5828,7 +6257,7 @@
     # Exit here if they wanted silent mode.
     test "$show" = : && exit $EXIT_SUCCESS
 
-    $echo "----------------------------------------------------------------------"
+    $echo "X----------------------------------------------------------------------" | $Xsed
     $echo "Libraries have been installed in:"
     for libdir in $libdirs; do
       $echo "   $libdir"
@@ -5861,7 +6290,7 @@
     $echo
     $echo "See any operating system documentation about shared libraries for"
     $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "----------------------------------------------------------------------"
+    $echo "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
     ;;
 
@@ -6078,9 +6507,17 @@
 	    rmfiles="$rmfiles $objdir/$n"
 	  done
 	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-	  test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 
-	  if test "$mode" = uninstall; then
+	  case "$mode" in
+	  clean)
+	    case "  $library_names " in
+	    # "  " in the beginning catches empty $dlname
+	    *" $dlname "*) ;;
+	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    esac
+	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    ;;
+	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
 	      cmds=$postuninstall_cmds
@@ -6113,7 +6550,8 @@
 	      IFS="$save_ifs"
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
-	  fi
+	    ;;
+	  esac
 	fi
 	;;
 
@@ -6398,7 +6836,7 @@
 $echo
 $echo "Try \`$modename --help' for more information about other modes."
 
-exit $EXIT_SUCCESS
+exit $?
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
@@ -6412,12 +6850,11 @@
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
+disable_libs=shared
 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
+disable_libs=static
 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:

Modified: freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/libs/libedit/src/Makefile.in	Thu Dec 13 12:16:17 2007
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,15 +15,11 @@
 @SET_MAKE@
 
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -67,17 +63,21 @@
 nodist_libedit_la_OBJECTS = $(am__objects_1)
 libedit_la_OBJECTS = $(am_libedit_la_OBJECTS) \
 	$(nodist_libedit_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+libedit_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libedit_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
 SOURCES = $(libedit_la_SOURCES) $(nodist_libedit_la_SOURCES)
 DIST_SOURCES = $(libedit_la_SOURCES)
 nobase_includeHEADERS_INSTALL = $(install_sh_DATA)
@@ -87,8 +87,6 @@
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -116,6 +114,7 @@
 F77 = @F77@
 FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -129,6 +128,7 @@
 LT_VERSION = @LT_VERSION@
 MAKEINFO = @MAKEINFO@
 MANTYPE = @MANTYPE@
+MKDIR_P = @MKDIR_P@
 NROFF = @NROFF@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
@@ -143,13 +143,13 @@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -161,6 +161,7 @@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -188,8 +189,11 @@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h fcns.c help.c
 AHDR = vi.h emacs.h common.h 
 ASRC = $(srcdir)/vi.c $(srcdir)/emacs.c $(srcdir)/common.c
@@ -243,7 +247,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
 	    f=$(am__strip_dir) \
@@ -254,7 +258,7 @@
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  p=$(am__strip_dir) \
 	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
 	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
@@ -269,7 +273,7 @@
 	  rm -f "$${dir}/so_locations"; \
 	done
 libedit.la: $(libedit_la_OBJECTS) $(libedit_la_DEPENDENCIES) 
-	$(LINK) -rpath $(libdir) $(libedit_la_LDFLAGS) $(libedit_la_OBJECTS) $(libedit_la_LIBADD) $(LIBS)
+	$(libedit_la_LINK) -rpath $(libdir) $(libedit_la_OBJECTS) $(libedit_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -306,22 +310,22 @@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vis.Plo@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -331,13 +335,9 @@
 
 clean-libtool:
 	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
 install-nobase_includeHEADERS: $(nobase_include_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
 	@$(am__vpath_adj_setup) \
 	list='$(nobase_include_HEADERS)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
@@ -404,23 +404,21 @@
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	$(mkdir_p) $(distdir)/editline
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -437,7 +435,7 @@
 all-am: Makefile $(LTLIBRARIES) $(HEADERS)
 installdirs:
 	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: $(BUILT_SOURCES)
 	$(MAKE) $(AM_MAKEFLAGS) install-am
@@ -475,7 +473,7 @@
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-libtool distclean-tags
+	distclean-tags
 
 dvi: dvi-am
 
@@ -489,12 +487,20 @@
 
 install-data-am: install-nobase_includeHEADERS
 
+install-dvi: install-dvi-am
+
 install-exec-am: install-libLTLIBRARIES
 
+install-html: install-html-am
+
 install-info: install-info-am
 
 install-man:
 
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -515,22 +521,25 @@
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
-	uninstall-nobase_includeHEADERS
+uninstall-am: uninstall-libLTLIBRARIES uninstall-nobase_includeHEADERS
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
 	clean-libLTLIBRARIES clean-libtool ctags distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
 	install-libLTLIBRARIES install-man \
-	install-nobase_includeHEADERS install-strip installcheck \
+	install-nobase_includeHEADERS install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-info-am \
-	uninstall-libLTLIBRARIES uninstall-nobase_includeHEADERS
+	tags uninstall uninstall-am uninstall-libLTLIBRARIES \
+	uninstall-nobase_includeHEADERS
 
 
 vi.h: Makefile $(srcdir)/vi.c

Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/include/switch_module_interfaces.h	Thu Dec 13 12:16:17 2007
@@ -55,7 +55,7 @@
 	SWITCH_SHN_ON_TRANSMIT,
 	SWITCH_SHN_ON_HOLD,
 	SWITCH_SHN_ON_HIBERNATE,
-	SWITCH_SHN_ON_RESET,
+	SWITCH_SHN_ON_RESET
 } switch_state_handler_name_t;
 
 struct switch_state_handler_table {

Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/mod/applications/mod_dptools/mod_dptools.c	Thu Dec 13 12:16:17 2007
@@ -658,7 +658,7 @@
 		switch_channel_event_set_data(channel, event);
 		switch_event_serialize(event, &buf, SWITCH_FALSE);
 		switch_assert(buf);
-		switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_CRIT, "CHANNEL_DATA:\n%s\n", buf);
+		switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "CHANNEL_DATA:\n%s\n", buf);
 		switch_event_destroy(&event);
 		free(buf);
 	}

Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/mod/event_handlers/mod_cdr_csv/mod_cdr_csv.c	Thu Dec 13 12:16:17 2007
@@ -278,7 +278,7 @@
 			switch_channel_event_set_data(channel, event);
 			switch_event_serialize(event, &buf, SWITCH_FALSE);
 			switch_assert(buf);
-			switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_CRIT, "CHANNEL_DATA:\n%s\n", buf);
+			switch_log_printf(SWITCH_CHANNEL_LOG, SWITCH_LOG_INFO, "CHANNEL_DATA:\n%s\n", buf);
 			switch_event_destroy(&event);
 			free(buf);
 		}

Modified: freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c
==============================================================================
--- freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c	(original)
+++ freeswitch/branches/stkn/sofia-exp/trunk/src/switch_rtp.c	Thu Dec 13 12:16:17 2007
@@ -310,17 +310,17 @@
         return END_PORT;
 }
 
-static void release_port(switch_rtp_t *rtp_session)
+static void release_port(const char *host, int port)
 {
 	switch_core_port_allocator_t *alloc = NULL;
 
-	if (!rtp_session->rx_host) {
+	if (!host) {
 		return;
 	}
 
     switch_mutex_lock(port_lock);
-    if ((alloc = switch_core_hash_find(alloc_hash, rtp_session->rx_host))) {
-		switch_core_port_allocator_free_port(alloc, rtp_session->rx_port);
+    if ((alloc = switch_core_hash_find(alloc_hash, host))) {
+		switch_core_port_allocator_free_port(alloc, port);
 	}
 	switch_mutex_unlock(port_lock);
 
@@ -412,7 +412,6 @@
 		*err = "Send myself a packet failed!";
 		goto done;
 	}
-	release_port(rtp_session);
 	
 	old_sock = rtp_session->sock;
 	rtp_session->sock = new_sock;
@@ -429,12 +428,6 @@
 
   done:
 
-	if (status == SWITCH_STATUS_SUCCESS) {
-		rtp_session->rx_host = switch_core_strdup(rtp_session->pool, host);
-		rtp_session->rx_port = port;
-		rtp_session->ready = 1;
-	}
-
 	if (new_sock) {
 		switch_socket_close(new_sock);
 	}
@@ -611,21 +604,31 @@
 											  uint32_t ms_per_packet,
 											  switch_rtp_flag_t flags, char *crypto_key, char *timer_name, const char **err, switch_memory_pool_t *pool)
 {
-	switch_rtp_t *rtp_session;
-
+	switch_rtp_t *rtp_session = NULL;
+	
 	if (switch_rtp_create(&rtp_session, payload, samples_per_interval, ms_per_packet, flags, crypto_key, timer_name, err, pool) != SWITCH_STATUS_SUCCESS) {
-		return NULL;
+		goto end;
 	}
-
+	
 	if (switch_rtp_set_remote_address(rtp_session, tx_host, tx_port, err) != SWITCH_STATUS_SUCCESS) {
-		return NULL;
+		rtp_session = NULL;
+		goto end;
 	}
 
 	if (switch_rtp_set_local_address(rtp_session, rx_host, rx_port, err) != SWITCH_STATUS_SUCCESS) {
-		return NULL;
+		rtp_session = NULL;
+	}
+
+ end:
+
+	if (rtp_session) {
+		rtp_session->ready = 1;
+		rtp_session->rx_host = switch_core_strdup(rtp_session->pool, rx_host);
+		rtp_session->rx_port = rx_port;
+	} else {
+		release_port(rx_host, rx_port);
 	}
 
-	rtp_session->ready = 1;
 	return rtp_session;
 }
 
@@ -720,7 +723,7 @@
 		switch_core_timer_destroy(&(*rtp_session)->timer);
 	}
 
-	release_port(*rtp_session);
+	release_port((*rtp_session)->rx_host, (*rtp_session)->rx_port);
 
 	switch_mutex_unlock((*rtp_session)->flag_mutex);
 	return;

    

[Freeswitch-branches] [commit] r6755 - in freeswitch/branches/stkn/sofia-exp/trunk: . conf conf/autoload_configs conf/lang/en/vm conf/sip_profiles libs/libedit libs/libedit/doc libs/libedit/examples libs/libedit/src src src/include src/mod/applications/mod_dptools src/mod/event_handlers/mod_cdr_csv

Freeswitch SVN

tags

participants (1)