Author: gmaruzz Date: Wed Feb 11 14:47:34 2009 New Revision: 11891 Log: skypiax: corrected type in config file, a tcp port was used twice Modified: freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf Modified: freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf ============================================================================== --- freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf (original) +++ freeswitch/branches/gmaruzz/mod_skypiax/asterisk/skypiax.conf Wed Feb 11 14:47:34 2009 @@ -1,121 +1,207 @@ -;; -;; -; Skypiax Asterisk Driver -; -; Configuration file -; lines beginning with semicolon (" are ignored (commented out) -; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -; The first interface (named skypeclient) -[skypeclient] -;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;; -; general settings, valid on all platforms -; -; -; Default language -; +;;;;;;;; +;;;;;;;; +;;;;;;; Skypiax Asterisk Driver +;;;;;;; +;;;;;;; Configuration file +;;;;;;; lines beginning with semicolon (" are ignored (commented out) +;;;;;;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;; +;;;;;;; The first interface (named skypeclient) +;;;;;;[skypeclient] +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;; general settings, valid on all platforms +;;;;;;; +;;;;;;; +;;;;;;; Default language +;;;;;;; +;;;;;;language=en +;;;;;;; +;;;;;;; Default context (in extensions.conf, can be overridden with @context syntax) +;;;;;;; +;;;;;;context=default +;;;;;;; +;;;;;;; Default extension (in extensions.conf) where incoming calls land +;;;;;;; +;;;;;;extension=s +;;;;;;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;; Debugging settings, valid globally for all interfaces on all platforms +;;;;;;; +;;;;;;; the debug values are global for all the interfaces. +;;;;;;; +;;;;;;; default is no skypiax debugging output, you **have** to activate debugging here to obtain debugging from skypiax +;;;;;;; +;;;;;;; To see the debugging output you have to "set debug 100" from the Asterisk CLI or launch +;;;;;;; Asterisk with -ddddddddddd option, and have the logger.conf file activating debug info for console and messages +;;;;;;; +;;;;;;; You can activate each of the following separately, but you can't disactivate. Eg: debug_at=no does not subtract debug_at from debug_all +;;;;;;; debug_all activate all possible debugging info +;;;;;;; +;;;;;;;debug_all=yes +;;;;;;debug_skype=yes +;;;;;;debug_pbx=yes +;;;;;;;debug_sound=yes +;;;;;;;debug_locks=yes +;;;;;;;debug_monitorlocks=yes +;;;;;; +;;;;;;skype=yes ; legacy setting, leave it to yes +;;;;;;X11_display=:101 +;;;;;;tcp_cli_port=11234 +;;;;;;tcp_srv_port=11235 +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;;;;;;; audio boost settings, valid for all platforms, to compensate for different input/output audio signal levels +;;;;;;; tweak it if you get horrible (or not hearable) sound +;;;;;;; +;;;;;;;boost can be positive or negative (-40 to +40) in db +;;;;;;;experiment to find which values are best for your computer +;;;;;;playback_boost=0 ; +;;;;;;capture_boost=0 ; +;;;;;; +;;; [skypiax1] +;;; language=en +;;; context=default +;;; extension=s +;;; debug_skype=yes +;;; debug_pbx=yes +;;; skype=yes ; legacy setting, leave it to yes +;;; playback_boost=0 ; +;;; capture_boost=0 ; +;;; X11_display=:101 +;;; tcp_cli_port=15576 +;;; tcp_srv_port=15577 +;;; skype_user=skypiax1 +;;; +;;; [skypiax2] +;;; language=en +;;; context=default +;;; extension=s +;;; debug_skype=yes +;;; debug_pbx=yes +;;; skype=yes ; legacy setting, leave it to yes +;;; playback_boost=0 ; +;;; capture_boost=0 ; +;;; X11_display=:102 +;;; tcp_cli_port=15578 +;;; tcp_srv_port=15579 +;;; skype_user=skypiax2 +;;; +;;; [skypiax3] +;;; language=en +;;; context=default +;;; extension=s +;;; debug_skype=yes +;;; debug_pbx=yes +;;; skype=yes ; legacy setting, leave it to yes +;;; playback_boost=0 ; +;;; capture_boost=0 ; +;;; X11_display=:103 +;;; tcp_cli_port=15580 +;;; tcp_srv_port=15581 +;;; skype_user=skypiax3 +;;; +[skypiax4] language=en -; -; Default context (in extensions.conf, can be overridden with @context syntax) -; context=default -; -; Default extension (in extensions.conf) where incoming calls land -; extension=s -; -;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;; -; Debugging settings, valid globally for all interfaces on all platforms -; -; the debug values are global for all the interfaces. -; -; default is no skypiax debugging output, you **have** to activate debugging here to obtain debugging from skypiax -; -; To see the debugging output you have to "set debug 100" from the Asterisk CLI or launch -; Asterisk with -ddddddddddd option, and have the logger.conf file activating debug info for console and messages -; -; You can activate each of the following separately, but you can't disactivate. Eg: debug_at=no does not subtract debug_at from debug_all -; debug_all activate all possible debugging info -; -;debug_all=yes debug_skype=yes debug_pbx=yes -;debug_sound=yes -;debug_locks=yes -;debug_monitorlocks=yes +skype=yes ; legacy setting, leave it to yes +playback_boost=0 ; +capture_boost=0 ; +X11_display=:104 +tcp_cli_port=15582 +tcp_srv_port=15583 +skype_user=skypiax4 +[skypiax5] +language=en +context=default +extension=s +debug_skype=yes +debug_pbx=yes +skype=yes ; legacy setting, leave it to yes +playback_boost=0 ; +capture_boost=0 ; +X11_display=:105 +tcp_cli_port=15584 +tcp_srv_port=15585 +skype_user=skypiax5 + +[skypiax6] +language=en +context=default +extension=s +debug_skype=yes +debug_pbx=yes skype=yes ; legacy setting, leave it to yes -X11_display=:101 -tcp_cli_port=11234 -tcp_srv_port=11235 -skype_user=gmaruzz2 -;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;; -; audio boost settings, valid for all platforms, to compensate for different input/output audio signal levels -; tweak it if you get horrible (or not hearable) sound -; -;boost can be positive or negative (-40 to +40) in db -;experiment to find which values are best for your computer playback_boost=0 ; capture_boost=0 ; +X11_display=:106 +tcp_cli_port=15586 +tcp_srv_port=16586 +skype_user=skypiax6 -;;;[skypeclient2] -;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; general settings, valid on all platforms -;;;; -;;;; -;;;; Default language -;;;; -;;;language=en -;;;; -;;;; Default context (in extensions.conf, can be overridden with @context syntax) -;;;; -;;;context=default -;;;; -;;;; Default extension (in extensions.conf) where incoming calls land -;;;; -;;;extension=s -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; Debugging settings, valid globally for all interfaces on all platforms -;;;; -;;;; the debug values are global for all the interfaces. -;;;; -;;;; default is no skypiax debugging output, you **have** to activate debugging here to obtain debugging from skypiax -;;;; -;;;; To see the debugging output you have to "set debug 100" from the Asterisk CLI or launch -;;;; Asterisk with -ddddddddddd option, and have the logger.conf file activating debug info for console and messages -;;;; -;;;; You can activate each of the following separately, but you can't disactivate. Eg: debug_at=no does not subtract debug_at from debug_all -;;;; debug_all activate all possible debugging info -;;;; -;;;;debug_all=yes -;;;debug_skype=yes -;;;debug_pbx=yes -;;;;debug_sound=yes -;;;;debug_locks=yes -;;;;debug_monitorlocks=yes -;;; -;;;skype=yes ; legacy setting, leave it to yes -;;;X11_display=:102 -;;;tcp_cli_port=11236 -;;;tcp_srv_port=11237 -;;;skype_user=gmaruzz3 -;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; audio boost settings, valid for all platforms, to compensate for different input/output audio signal levels -;;;; tweak it if you get horrible (or not hearable) sound -;;;; -;;;;boost can be positive or negative (-40 to +40) in db -;;;;experiment to find which values are best for your computer -;;;playback_boost=0 ; -;;;capture_boost=0 ; -;;; -;;; +;;; [skypiax17] +;;; language=en +;;; context=default +;;; extension=s +;;; debug_skype=yes +;;; debug_pbx=yes +;;; skype=yes ; legacy setting, leave it to yes +;;; playback_boost=0 ; +;;; capture_boost=0 ; +;;; X11_display=:117 +;;; tcp_cli_port=15587 +;;; tcp_srv_port=15588 +;;; skype_user=skypiax17 +;;; +;;; [skypiax18] +;;; language=en +;;; context=default +;;; extension=s +;;; debug_skype=yes +;;; debug_pbx=yes +;;; skype=yes ; legacy setting, leave it to yes +;;; playback_boost=0 ; +;;; capture_boost=0 ; +;;; X11_display=:118 +;;; tcp_cli_port=15589 +;;; tcp_srv_port=15590 +;;; skype_user=skypiax18 +;;; +;;; [skypiax19] +;;; language=en +;;; context=default +;;; extension=s +;;; debug_skype=yes +;;; debug_pbx=yes +;;; skype=yes ; legacy setting, leave it to yes +;;; playback_boost=0 ; +;;; capture_boost=0 ; +;;; X11_display=:119 +;;; tcp_cli_port=15591 +;;; tcp_srv_port=15592 +;;; skype_user=skypiax19 +;;; +;;; [skypiax20] +;;; language=en +;;; context=default +;;; extension=s +;;; debug_skype=yes +;;; debug_pbx=yes +;;; skype=yes ; legacy setting, leave it to yes +;;; playback_boost=0 ; +;;; capture_boost=0 ; +;;; X11_display=:120 +;;; tcp_cli_port=15593 +;;; tcp_srv_port=15594 +;;; skype_user=skypiax20 +;;; +;;; +;;;