<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1">
</head>
<body alink="#EE0000" bgcolor="#ffffff" link="#0000EE" text="#000000"
vlink="#551A8B">
Hello Everyone,<br>
<br>
I am trying to configure a PRI connection. When I call from my
mobile number to the PRI landline number, I get the following log:
The call has never connected, I hear an engaged tone and it
disconnects.<br>
<br>
Question 1: In the fourth line that is marked in red, the message
says Called No:[000]. The number that I actually dialed from my
mobile (7502029000) is +914274302000. I am not able to figure out
what only three digits are displayed. <br>
<br>
Question 2: When freeswitch receives an inbound call - in what
sequence is the call processed ? What dialplans should I be looking
at?<br>
Question 3: How do I or where do I find the number that is being
called in freeswitch ?<br>
<br>
<br>
Any pointers or advise on how to go about this, is much appreciated.
<br>
<br>
Thanks.<br>
Ravi<br>
<br>
<br>
2013-08-13 11:08:45.145709 [DEBUG] ftmod_wanpipe.c:1400
[s1c31][1:16] Link status is 1<br>
2013-08-13 11:08:45.145709 [INFO] ftmod_sangoma_isdn_stack_rcv.c:96
[s1c9][1:9] Received SETUP (suId:1 suInstId:0 spInstId:9)<br>
2013-08-13 11:08:45.145709 [DEBUG]
ftmod_sangoma_isdn_stack_hndl.c:57 [s1c9][1:9] Processing SETUP
(suId:1 suInstId:0 spInstId:9)<br>
2013-08-13 11:08:45.145709 [INFO] <b><font color="#cc0000">ftmod_sangoma_isdn_stack_hndl.c:153
[s1c9][1:9] Incoming call: Called No:[000] Calling
No:[7502029000]</font></b><br>
2013-08-13 11:08:45.145709 [DEBUG]
ftmod_sangoma_isdn_stack_hndl.c:209 [s1c9][1:9] Changed state from
DOWN to RING<br>
2013-08-13 11:08:45.145709 [DEBUG] ftdm_state.c:541 [s1c9][1:9]
Executing state processor for RING<br>
2013-08-13 11:08:45.145709 [DEBUG] ftmod_sangoma_isdn.c:655
[s1c9][1:9] processing state change to RING<br>
2013-08-13 11:08:45.145709 [DEBUG] ftmod_sangoma_isdn.c:676
[s1c9][1:9] Sending incoming call from 7502029000 to 000 to FTDM
core<br>
2013-08-13 11:08:45.145709 [DEBUG] ftmod_sangoma_isdn.c:923
[s1c9][1:9] Completed state change from DOWN to RING in 0 ms<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:2657 got clear
channel sig [START]<br>
2013-08-13 11:08:45.145709 [DEBUG] ftmod_wanpipe.c:749 [s1c9][1:9]
Enabled DTMF events<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:403 Set codec PCMA
20ms<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:1890 Connect
inbound channel FreeTDM/1:9/000<br>
2013-08-13 11:08:45.145709 [NOTICE] switch_channel.c:1030 New
Channel FreeTDM/1:9/000 [9eb4ce34-03da-11e3-8bc5-0b625c405e53]<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:2093
(FreeTDM/1:9/000) State Change CS_NEW -> CS_INIT<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_session.c:1341 Send
signal FreeTDM/1:9/000 [BREAK]<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_state_machine.c:416
(FreeTDM/1:9/000) Running State Change CS_INIT<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_state_machine.c:455
(FreeTDM/1:9/000) State INIT<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:430
(FreeTDM/1:9/000) State Change CS_INIT -> CS_ROUTING<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_session.c:1341 Send
signal FreeTDM/1:9/000 [BREAK]<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_state_machine.c:455
(FreeTDM/1:9/000) State INIT going to sleep<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_state_machine.c:416
(FreeTDM/1:9/000) Running State Change CS_ROUTING<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_channel.c:2116
(FreeTDM/1:9/000) Callstate Change DOWN -> RINGING<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_state_machine.c:471
(FreeTDM/1:9/000) State ROUTING<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:453 FreeTDM/1:9/000
CHANNEL ROUTING<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:456 [s1c9][1:9]
Indicating PROCEED in state RING<br>
2013-08-13 11:08:45.145709 [DEBUG] mod_freetdm.c:456 [s1c9][1:9]
Changed state from RING to PROCEED<br>
2013-08-13 11:08:45.145709 [DEBUG] ftdm_state.c:541 [s1c9][1:9]
Executing state processor for PROCEED<br>
2013-08-13 11:08:45.145709 [DEBUG] ftmod_sangoma_isdn.c:655
[s1c9][1:9] processing state change to PROCEED<br>
2013-08-13 11:08:45.145709 [INFO] ftmod_sangoma_isdn_stack_out.c:175
[s1c9][1:9] Sending PROCEED (suId:1 suInstId:9 spInstId:9 dchan:1
ces:0)<br>
2013-08-13 11:08:45.145709 [DEBUG] ftmod_sangoma_isdn.c:923
[s1c9][1:9] Completed state change from RING to PROCEED in 0 ms<br>
2013-08-13 11:08:45.145709 [DEBUG] switch_core_state_machine.c:117
FreeTDM/1:9/000 Standard ROUTING<br>
2013-08-13 11:08:45.145709 [INFO] mod_dialplan_xml.c:558 Processing
<7502029000>->000 in context default<br>
Dialplan: FreeTDM/1:9/000 parsing [default->unloop]
continue=false<br>
Dialplan: FreeTDM/1:9/000 Regex (PASS) [unloop]
${unroll_loops}(true) =~ /^true$/ break=on-false<br>
Dialplan: FreeTDM/1:9/000 Regex (FAIL) [unloop] ${sip_looped_call}()
=~ /^true$/ break=on-false<br>
Dialplan: FreeTDM/1:9/000 parsing [default->tod_example]
continue=true<br>
Dialplan: FreeTDM/1:9/000 Date/Time Match (PASS) [tod_example]
break=on-false<br>
Dialplan: FreeTDM/1:9/000 Action set(open=true) <br>
Dialplan: FreeTDM/1:9/000 parsing [default->holiday_example]
continue=true<br>
Dialplan: FreeTDM/1:9/000 Date/TimeMatch (FAIL) [holiday_example]
break=on-false<br>
Dialplan: FreeTDM/1:9/000 parsing [default->global-intercept]
continue=false<br>
Dialplan: FreeTDM/1:9/000 Regex (FAIL) [global-intercept]
destination_number(000) =~ /^886$/ break=on-false<br>
Dialplan: FreeTDM/1:9/000 parsing [default->group-intercept]
continue=false<br>
<br>
<br>
</body>
</html>