<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
<title></title>
</head>
<body text="#000000" bgcolor="#ffffff">
It seems like a bug in ftmod_libpri, as it is not able to handle the
incoming Acknowledge packets. I have tried it with freeswitch 1.4.0
also it is still there. Digium TE121 + freeswitch 1.4.0 + Dahdi
2.7.0 + libpri 1.4.14 is not working. Channel State is still down
where as Signaling is up.<br>
<br>
<br>
<br>
On Friday 09 August 2013 11:55 AM, Rajat toshniwal wrote:
<blockquote cite="mid:52048B5D.8000207@tekmindz.com" type="cite">
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
Any Clues ??<br>
<br>
On Thursday 08 August 2013 07:02 PM, Rajat toshniwal wrote:
<blockquote cite="mid:52039DD4.9070109@tekmindz.com" type="cite">
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
Forget to mention that I have already tested below mentioned
configuration <br>
<div><br>
</div>
<ol>
<li>Go to FS source directory and change dir to this
path libs/freetdm/src/ftmod/ftmod_libpri</li>
<li>change #define T316_TIMEOUT_MS_DEFAULT to 10000</li>
<li> #define T316_TIMEOUT_MS_MAX to 300000</li>
<li>#define T316_ATTEMPT_LIMIT_DEFAULT to 30 (max. channels in
PRI lines)</li>
</ol>
It didn't work<br>
<br>
Also we are using the latest version of Freeswitch 1.2.12 and
libpri1.4.14<br>
<br>
Regards<br>
Rajat Toshniwal<br>
<br>
<br>
<br>
On Thursday 08 August 2013 04:17 PM, Rajat toshniwal wrote:
<blockquote cite="mid:5203774A.7040906@tekmindz.com" type="cite">
<pre wrap="">Hi
I am trying to deploy freeswitch with Digium TE121 card for my office
setup, but it is continuously showing Signaling is up and channels are
down except D channel.
Our Architecture is like
We have freeswitch installed with libpri1.4 and Dahdi.
I am from India and here we are having E1 trunk.
Dahdi Configuration is
cat system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 7 19:39:07 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Global data
loadzone = uk
defaultzone = uk
cat modules
# Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules)
on Wed Aug 7 19:37:48 2013
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
wcte12xp
# Xorcom Astribank Devices
xpp_usb
dahdi_hardware
pci:0000:02:08.0 wcte12xp+ d161:8000 Wildcard TE121
dahdi_scan
[1]
active=yes
alarms=OK
description=Wildcard TE121 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Wildcard TE121 (VPMOCT032)
location=PCI Bus 02 Slot 09
basechan=1
totchans=31
irq=0
type=digital-E1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=AMI,HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS/CRC4
Card is properly installed and recognized by Dahdi
Freetdm is compiled with libpri and configuration is like
cat /usr/local/freeswitch/conf/freetdm.conf
[general]
cpu_monitor => yes
cpu_monitoring_interval => 2000 ; monitor usage every 2 seconds
cpu_set_alarm_threshold => 90 ; whenever 90% of global CPU usage is
reached, trigger the alarm.
cpu_reset_alarm_threshold => 80 ; when the CPU usage decreases at 80%,
clear the alarm.
cpu_alarm_action => reject,warn ; Start rejecting calls when the CPU
alarm is triggered and also print warnings.
[span zt myDAHDISpan]
trunk_type => E1
group => g1
b-channel => 1-15
d-channel => 16
b-channel => 17-31
cat /usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml
<configuration name="freetdm.conf" description="FreeTDM Configuration">
<settings>
<param name="debug" value="1"/>
</settings>
<libpri_spans>
<span name="myDAHDISpan">
<!-- Log Levels: none, alert, crit, err, warning, notice, info, debug -->
<param name="switch" value="euroisdn"/>
<param name="node" value="cpe"/>
<param name="dialect" value="q931"/>
<param name="debug" value="all"/>
<param name="dialplan" value="XML"/>
<param name="context" value="public"/>
<param name="l1" value="alaw"/>
</span>
</libpri_spans>
</configuration>
Freeswitch logs are showing
2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c10][1:10]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c11][1:11]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c12][1:12]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.613848 [WARNING] ftmod_libpri.c:1975 [s1c13][1:13]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c17][1:17]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c18][1:18]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c19][1:19]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c20][1:20]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c21][1:21]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c22][1:22]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c23][1:23]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c24][1:24]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c25][1:25]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c26][1:26]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c27][1:27]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c28][1:28]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c29][1:29]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c30][1:30]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:18.633847 [WARNING] ftmod_libpri.c:1975 [s1c31][1:31]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:23.673847 [WARNING] ftdm_io.c:3022 [s1c5][1:5] Channel
not opened, proceeding anyway
2013-08-08 15:38:48.613848 [WARNING] ftmod_libpri.c:1975 [s1c6][1:6] --
T316 timed out, resending RESTART request
2013-08-08 15:38:48.613848 [WARNING] ftmod_libpri.c:1975 [s1c7][1:7] --
T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c8][1:8] --
T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c9][1:9] --
T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c10][1:10]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c11][1:11]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c12][1:12]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c13][1:13]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15]
-- T316 timed out, resending RESTART request
2013-08-08 15:38:48.633850 [WARNING] ftmod_libpri.c:1975 [s1c17][1:17]
-- T316 timed out, resending RESTART request
Libpri logs are showing
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
DL-DATA request
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Protocol Discriminator: Q.931 (8) len=13
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Message Type: RESTART (70)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
TEI=0 Transmitting N(S)=4, window is open V(A)=2 K=7
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI: 0 State 7(Multi-frame established)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
V(A)=2, V(S)=4, V(R)=6
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
T200_id=8192, N200=3, T203_id=0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [
00 01 08 0c 08 02 00 00 46 18 03 a9 83 8d 79 01 80 ]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Informational frame:
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
SAPI: 00 C/R: 0 EA: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI: 000 EA: 1
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
N(S): 004 0: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
N(R): 006 P: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 13
bytes of data
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Protocol Discriminator: Q.931 (8) len=13
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Message Type: RESTART (70)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
[18 03 a9 83 8d]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0
Exclusive Dchan: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
> ChanSel: As indicated in following octets
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
> Ext: 1 Coding: 0 Number Specified Channel
Type: 3
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
> Ext: 1 Channel: 13 Type: CPE]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
[79 01 80]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Restart Indicator (len= 3) [ Ext: 1 Spare: 0 Resetting Indicated
Channel (0) ]
2013-08-08 15:41:18.633844 [DEBUG] lpwrap_pri.c:199 [s1c16][1:16] --
Starting timer 0x2678478 with timeout 30000 ms
2013-08-08 15:41:18.633844 [WARNING] ftmod_libpri.c:1975 [s1c14][1:14]
-- T316 timed out, resending RESTART request
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
DL-DATA request
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Protocol Discriminator: Q.931 (8) len=13
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Message Type: RESTART (70)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
TEI=0 Transmitting N(S)=5, window is open V(A)=2 K=7
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI: 0 State 7(Multi-frame established)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
V(A)=2, V(S)=5, V(R)=6
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
K=7, RC=0, l3_initiated=0, reject_except=0, ack_pend=0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
T200_id=8192, N200=3, T203_id=0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > [
00 01 0a 0c 08 02 00 00 46 18 03 a9 83 8e 79 01 80 ]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Informational frame:
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
SAPI: 00 C/R: 0 EA: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI: 000 EA: 1
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
N(S): 005 0: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
N(R): 006 P: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] > 13
bytes of data
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Protocol Discriminator: Q.931 (8) len=13
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
TEI=0 Call Ref: len= 2 (reference 0/0x0) (Sent from originator)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Message Type: RESTART (70)
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
[18 03 a9 83 8e]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Channel ID (len= 5) [ Ext: 1 IntID: Implicit Other(PRI) Spare: 0
Exclusive Dchan: 0
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
> ChanSel: As indicated in following octets
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
> Ext: 1 Coding: 0 Number Specified Channel
Type: 3
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16]
> Ext: 1 Channel: 14 Type: CPE]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
[79 01 80]
2013-08-08 15:41:18.633844 [DEBUG] ftmod_libpri.c:134 [s1c16][1:16] >
Restart Indicator (len= 3) [ Ext: 1 Spare: 0 Resetting Indicated
Channel (0) ]
2013-08-08 15:41:18.633844 [DEBUG] lpwrap_pri.c:199 [s1c16][1:16] --
Starting timer 0x26784d8 with timeout 30000 ms
2013-08-08 15:41:18.633844 [WARNING] ftmod_libpri.c:1975 [s1c15][1:15]
-- T316 timed out, resending RESTART request
ftdm dump 1 n (where n is from 1 to 15 and 17 to 31) is showing state
as down
freeswitch@dst1> ftdm dump 1 1
span_id: 1
chan_id: n
physical_span_id: 1
physical_chan_id: n
physical_status: ok
physical_status_red: 0
physical_status_yellow: 0
physical_status_rai: 0
physical_status_blue: 0
physical_status_ais: 0
physical_status_general: 0
signaling_status: UP
type: B
state: DOWN
last_state: RESTART
txgain: 0.00
rxgain: 0.00
cid_date:
cid_name:
cid_num:
ani:
aniII:
dnis:
rdnis:
cause: NONE
session: (none)
I have tried many configurations, but I am not able to fix that issue ,
If I put my Pri line into panasonic PBX, it is working properly.
Kindly help me in solving this issue.
Regards
Rajat Toshniwal
----------------------------------------------------------------------------------
Disclaimer: The information contained in this communication is confidential, private, proprietary, or otherwise privileged and is intended only for the use of the addressee. Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please delete this message and notify the sender immediately - Samin TekMindz India Pvt. Ltd.
----------------------------------------------------------------------------------
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:consulting@freeswitch.org">consulting@freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.freeswitchsolutions.com">http://www.freeswitchsolutions.com</a>
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.cudatel.com">http://www.cudatel.com</a>
Official FreeSWITCH Sites
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.freeswitch.org">http://www.freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://wiki.freeswitch.org">http://wiki.freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.cluecon.com">http://www.cluecon.com</a>
FreeSWITCH-users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:FreeSWITCH-users@lists.freeswitch.org">FreeSWITCH-users@lists.freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.freeswitch.org/mailman/listinfo/freeswitch-users">http://lists.freeswitch.org/mailman/listinfo/freeswitch-users</a>
UNSUBSCRIBE:<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.freeswitch.org/mailman/options/freeswitch-users">http://lists.freeswitch.org/mailman/options/freeswitch-users</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.freeswitch.org">http://www.freeswitch.org</a>
</pre>
</blockquote>
<br>
<br>
<font color="BLACK"><font size="2.5"> <br>
<hr> Disclaimer: The information contained in this
communication is confidential, private, proprietary, or
otherwise privileged and is intended only for the use of the
addressee.Unauthorized use, disclosure, distribution or
copying is strictly prohibited and may be unlawful. If you
have received this communication in error, please delete
this message and notify the sender immediately - Samin
TekMindz India Pvt.Ltd.
<hr> </font> </font> <br>
<pre wrap=""><fieldset class="mimeAttachmentHeader"></fieldset>
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:consulting@freeswitch.org">consulting@freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.freeswitchsolutions.com">http://www.freeswitchsolutions.com</a>
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.cudatel.com">http://www.cudatel.com</a>
Official FreeSWITCH Sites
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.freeswitch.org">http://www.freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://wiki.freeswitch.org">http://wiki.freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.cluecon.com">http://www.cluecon.com</a>
FreeSWITCH-users mailing list
<a moz-do-not-send="true" class="moz-txt-link-abbreviated" href="mailto:FreeSWITCH-users@lists.freeswitch.org">FreeSWITCH-users@lists.freeswitch.org</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.freeswitch.org/mailman/listinfo/freeswitch-users">http://lists.freeswitch.org/mailman/listinfo/freeswitch-users</a>
UNSUBSCRIBE:<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://lists.freeswitch.org/mailman/options/freeswitch-users">http://lists.freeswitch.org/mailman/options/freeswitch-users</a>
<a moz-do-not-send="true" class="moz-txt-link-freetext" href="http://www.freeswitch.org">http://www.freeswitch.org</a>
</pre>
</blockquote>
<br>
<br>
<font color="BLACK"><font size="2.5"> <br>
<hr> Disclaimer: The information contained in this
communication is confidential, private, proprietary, or
otherwise privileged and is intended only for the use of the
addressee.Unauthorized use, disclosure, distribution or
copying is strictly prohibited and may be unlawful. If you
have received this communication in error, please delete this
message and notify the sender immediately - Samin TekMindz
India Pvt.Ltd.
<hr> </font> </font>
<br>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
<a class="moz-txt-link-abbreviated" href="mailto:consulting@freeswitch.org">consulting@freeswitch.org</a>
<a class="moz-txt-link-freetext" href="http://www.freeswitchsolutions.com">http://www.freeswitchsolutions.com</a>
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
<a class="moz-txt-link-freetext" href="http://www.cudatel.com">http://www.cudatel.com</a>
Official FreeSWITCH Sites
<a class="moz-txt-link-freetext" href="http://www.freeswitch.org">http://www.freeswitch.org</a>
<a class="moz-txt-link-freetext" href="http://wiki.freeswitch.org">http://wiki.freeswitch.org</a>
<a class="moz-txt-link-freetext" href="http://www.cluecon.com">http://www.cluecon.com</a>
FreeSWITCH-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:FreeSWITCH-users@lists.freeswitch.org">FreeSWITCH-users@lists.freeswitch.org</a>
<a class="moz-txt-link-freetext" href="http://lists.freeswitch.org/mailman/listinfo/freeswitch-users">http://lists.freeswitch.org/mailman/listinfo/freeswitch-users</a>
UNSUBSCRIBE:<a class="moz-txt-link-freetext" href="http://lists.freeswitch.org/mailman/options/freeswitch-users">http://lists.freeswitch.org/mailman/options/freeswitch-users</a>
<a class="moz-txt-link-freetext" href="http://www.freeswitch.org">http://www.freeswitch.org</a>
</pre>
</blockquote>
<br>
<br>
<font color="BLACK"><font size="2.5"> <br>
<hr>
Disclaimer: The information contained in this
communication is confidential, private, proprietary,
or otherwise privileged and is intended only for the
use of the addressee.Unauthorized use, disclosure,
distribution or copying is strictly prohibited and may
be unlawful. If you have received this communication
in error, please delete this message and notify the
sender immediately - Samin TekMindz India Pvt.Ltd.
<hr>
</font>
</font>
<br>
</body>
</html>