Hi,<br><br>I am trying to configure Sangoma A101DE card with Bharati Airtel (India) PRI Line.<br><br>Here is the output of "wanrouter status"<br><br>Devices currently active:<br> wanpipe1<br>Wanpipe Config:<br>
<br>Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate |<br>wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 16 | 4 | 1 | N/A | 0 |<br><br>Wanrouter Status:<br><br>Device name | Protocol | Station | Status |<br>
wanpipe1 | AFT TE1 | N/A | Connected |<br><br>I have configured the card with following settings.<br><br>Clock = Normal<br>SwitchType = EuroISDN/ETSI<br>Signalling = PRI NET<br>Dialplan Context = Public<br>DTMF Detection = Yes<br>
Hardware Fax Detection = No<br><br>Freeswitch recognized the card and here is the output of ftdm list<br><br>+OK<br>span: 1 (wp1)<br>type: Sangoma (ISDN)<br>physical_status: ok<br>signaling_status: UP<br>chan_count: 31<br>
dialplan: XML<br>context: public<br>dial_regex: <br>fail_dial_regex: <br>hold_music: <br>analog_options: none<br><br>I am stuck here. I don't receive any incoming calls and get a busy message when we dial our main DID no. <br>
<br>Please tell me where I am going wrong?<br><br>Thanks,<br><br>Ryan.<br><br><br>