I am seeing where I was couple weeks ago :-).<br><br>Ha, all the steps below are to launch multiple skype instances(in different X instances).<br><br>Step 2 is to prepare the base folder for skype. If you already followed the step to launch Skype once from a remote client using XAuth. What you need to do is just to copy the content under .Skype folder to as many places as the number of skype instances you want to run. Forget about the step 2 and 3, this part on wiki explains better:<br>
<br><pre>mkdir -p /root/multi/01<br>mkdir -p /root/multi/02<br>cp -a /root/.Skype/* /root/multi/01/<br>cp -a /root/.Skype/* /root/multi/02/<br></pre><br>Also I suggest you do everything with root login.<br><br>Those module not found errors are from the lines to remove all modules other than snd-dummy(guess not required but strongly suggested). What I did is to disable my onboard audio card in CMOS so when the server boots, no snd modules loaded at all. You could comment out the remove module lines and only leave the modprobe snd-dummy one there.<br>
<br>The skype launch script(no matter you use startskype.sh or multi.sh) just do the below steps:<br><br>load snd-dummy<br>launch X number 1<br>launch skype 1 in X number 1<br>....<br>launch X number N<br>launch skype N in X number N<br>
<br>The parts you need to customize are the skype account and base folder(the /root/multi/xx as above).<br><br>The skypopen.conf.xml file needs to be updated so it matches your skype launch script(same skype account and same X number)<br>
<br>Good Luck!<br>Jian<br><br><br><div class="gmail_quote">On Fri, Dec 3, 2010 at 11:01 AM, ha do <span dir="ltr"><<a href="mailto:haloha201@yahoo.com">haloha201@yahoo.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
hi all<br>
<br>
i try to use the skypopen and i follow on wiki page<br>
there are some places that are very hard to understand<br>
<br>
<br>
1/<br>
<br>
let's edit the startskype script<br>
remember to add the removing of all the installed snd-* modules<br>
cp freeswitch/src/mod/endpoints/mod_skypopen/configs/startskype.sh ./<br>
vi startskype.sh<br>
<br>
start the X servers and the Skype clients<br>
sh ./startskype.sh<br>
<br>
<br>
2/<br>
<br>
on "How to prepare the configuration directory of Skype clients on Linux", see<br>
<a href="http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#How_to_prepare_the_configuration_directory_of_Skype_clients_on_Linux_using_ssh_-X_and_xauth" target="_blank">http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#How_to_prepare_the_configuration_directory_of_Skype_clients_on_Linux_using_ssh_-X_and_xauth</a><br>
<br>
cp /mnt/root/configskypenew.tgz ./<br>
tar xzf configskypenew.tgz<br>
chown root.root .Skype<br>
<br>
configskypenew.tgz is not a published file - you must generate it yourself for<br>
your own configuration using the instructions at the above link. This is<br>
because it contains your authentication details.<br>
<br>
<br>
3/<br>
<br>
Copy and install the Skype clients configuration directory you previously<br>
prepared (see<br>
<a href="http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#How_to_prepare_the_configuration_directory_of_Skype_clients_on_Linux_using_ssh_-X_and_xauth" target="_blank">http://wiki.freeswitch.org/wiki/Skypopen_Skype_Endpoint_and_Trunk#How_to_prepare_the_configuration_directory_of_Skype_clients_on_Linux_using_ssh_-X_and_xauth</a><br>
for how to prepare it):<br>
<br>
cd /root<br>
mount /dev/hda5 /mnt<br>
cp /mnt/root/skypeconfig2.tgz ./<br>
tar xzf skypeconfig2.tgz<br>
chown -R root.root .Skype<br>
<br>
<br>
4/<br>
<br>
Install the skypopen configuration files, edit and execute the script that<br>
starts the Skype client instances:<br>
<br>
cd /usr/src<br>
cd freeswitch/src/mod/endpoints/mod_skypopen/<br>
cd configs/<br>
cp skypopen.conf.xml /usr/local/freeswitch/conf/autoload_configs/ ==> copy the<br>
config to autoload<br>
<br>
vi /usr/local/freeswitch/conf/autoload_configs/skypopen.conf.xml ==> what parts<br>
should i edit in the skypopen.conf.xml<br>
<br>
cp startskype.sh 2startskype.sh => where do i put the 2startskype.sh<br>
vi 2startskype.sh => what information should i input<br>
sh ./2startskype.sh<br>
<br>
<br>
<br>
when i start the sh ./startskype.sh i got the error<br>
skype@skype-desktop:/$ sh ./startskype.sh<br>
ERROR: Module snd_* does not exist in /proc/modules<br>
ERROR: Module snd_hda_intel is in use<br>
ERROR: Module snd_dummy is in use<br>
<br>
Fatal server error:<br>
Server is already active for display 101<br>
If this server is no longer running, remove /tmp/.X101-lock<br>
and start again.<br>
<br>
Password:<br>
<br>
<br>
what is the password i should input here<br>
<br>
<br>
where i put the real password of skype account and the real account ID of skype<br>
account<br>
<br>
<br>
please help<br>
Thank you<br>
Ha<br>
<br>
<br>
<br>
<br>
<br>
_______________________________________________<br>
FreeSWITCH-users mailing list<br>
<a href="mailto:FreeSWITCH-users@lists.freeswitch.org">FreeSWITCH-users@lists.freeswitch.org</a><br>
<a href="http://lists.freeswitch.org/mailman/listinfo/freeswitch-users" target="_blank">http://lists.freeswitch.org/mailman/listinfo/freeswitch-users</a><br>
UNSUBSCRIBE:<a href="http://lists.freeswitch.org/mailman/options/freeswitch-users" target="_blank">http://lists.freeswitch.org/mailman/options/freeswitch-users</a><br>
<a href="http://www.freeswitch.org" target="_blank">http://www.freeswitch.org</a><br>
</blockquote></div><br>