Dear All,<br> I have installed Sangoma PRI card in machine with following steps,<br> * wget <a href="ftp://ftp.sangoma.com/linux/custom/3.5/wanpipe-3.5.8.7.tgz">ftp://ftp.sangoma.com/linux/custom/3.5/wanpipe-3.5.8.7.tgz</a><br>
* tar -xvfz wanpipe-3.5.8.7.tgz<br> * cd wanpipe-3.5.8.7<br> * make openzap<br> * make install<br> * make install_pri<br> <br> I have executed "wanrouter hwprobe" command it prints the following details,<br>
<br> 1 . AFT-A102-SH : SLOT=4 : BUS=3 : IRQ=11 : CPU=A : PORT=1 : HWEC=0 : V=36<br> 2 . AFT-A102-SH : SLOT=4 : BUS=3 : IRQ=11 : CPU=A : PORT=2 : HWEC=0 : V=36<br> <br> Card Cnt: A101-2=1<br>
<br> Next I have executed wancfg_fs script to configure the sangoma for freeswitch. <br>It creates the following configuration files<br> * wanpipe1.conf <br> * wanpipe2.conf<br>
* smg_prid.conf<br> * openzap.conf<br> * openzap.conf.xml <br> I have attached those files.<br> I have started the wanrouter and printed the wanrouter status,<br>
Wanrouter Status:<br><br>Device name | Protocol | Station | Status |<br>wanpipe1 | AFT TE1 | N/A | Connected |<br>wanpipe2 | AFT TE1 | N/A | Disconnected |<br><br> Next I have started the smg_ctrl, but it failed to start. It prints the following things,<br>
smg_ctrl start<br><br>Starting processes...<br>Loading SCTP...OK<br>Starting sangoma_prid...OK<br>sangoma_prid failed to start<br>check /var/log/sangoma_mgd.log for errors<br><br>Stopping running processes...<br>safe_sangoma not running...<br>
sangoma_prid is stopped<br>Removing PID files...done<br><br>I have checked /var/log/sangoma_mgd.log file. But nothing was there.<br><br>Could any please tell me where I made mistake?<br><br>Thanks,<br>Mag<br><br><br> <br>
<br>