<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.28.1">
</HEAD>
<BODY>
The files are OK, the permissions on them are OK. <BR>
<BR>
Correct me if i'm wrong! If i set the variable "user_context" to "default" it should take into accounts the dialplans into freeswitch/conf/dialplan/default or there's more rules to consider?<BR>
<BR>
The Wiki explain that the user must be registered to receive the xml in diaplan/default, my phone is registered (see below)<BR>
<BR>
Call-ID: 7cd6e8c8-2c9962a5-7a0da12a@192.168.102.10
<PRE>
User: 6969@<domain>
Contact: "user"
Agent: PolycomSoundPointIP-SPIP_550-UA/2.1.2.0078
Status: Registered(UDP)(unknown) EXP(2009-12-03 16:57:35)
Host: <server>
IP: 192.168.102.10
Port: 5060
Auth-User: unknown
Auth-Realm: <domain>
MWI-Account: <A HREF="mailto:6969@192.168.100.99">6969@</A><domain>
The only thing i can think of is that my installation of «FusionPBX» (installed since day 1) messed something in config files but i really doubt it
since i didn't use FusionPBX between yesterday (when was working good) and this morning (after python recompile).
The other thing i see is the «Auth-User» in my registrations who shows «unknown» instead of the actual user ...
I'm really lost since everything was working perfectly before my re-compile of mod_python, i think i'll just start all over again ... since
i had almost nothing done so far!
Thanks for your time,
</PRE>
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<BR>
<B><FONT SIZE="2"><FONT COLOR="#003366">David Laperle </FONT></FONT></B><BR>
<FONT SIZE="2">Administrateur réseau / Network administrator</FONT><BR>
<FONT SIZE="2">(514) 393-7647 </FONT><BR>
<I><FONT SIZE="2">dlaperle@rsslex.com</FONT></I><BR>
<BR>
<B><FONT COLOR="#003366">Robinson Sheppard Shapiro </FONT></B><FONT COLOR="#003366">s.e.n.c.r.l/LLP</FONT><BR>
<FONT SIZE="1">Avocats / Barristers & Solicitors</FONT><BR>
<FONT SIZE="1">4600 - 800 Place Victoria</FONT><BR>
<FONT SIZE="1">Montréal Qc H4Z 1H6</FONT><BR>
<FONT SIZE="1">T (514) 878-2631 F (514) 878-1865</FONT><BR>
<FONT SIZE="1"><FONT COLOR="#003366">www.rsslex.com</FONT></FONT><FONT SIZE="1"> et/and </FONT><FONT SIZE="1"><FONT COLOR="#003366">www.rsscanadaimmigration.com</FONT></FONT><FONT SIZE="1"> </FONT><BR>
<BR>
<BR>
<BR>
<BR>
</TD>
</TR>
</TABLE>
On Thu, 2009-12-03 at 14:55 -0500, Michael Collins wrote:<BR>
<BLOCKQUOTE TYPE=CITE>
<BR>
<BR>
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
On Thu, Dec 3, 2009 at 10:29 AM, David Laperle <<A HREF="mailto:dlaperle@rsslex.com">dlaperle@rsslex.com</A>> wrote:
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
<BLOCKQUOTE>
Hi guys,<BR>
<BR>
i have a weird problem with my dialplans. For the moment, i have only 2 usable extensions. They were working #1 yesterday, but this morning i realize i forgot to compile mod_python, so i go back into my source folder and modify the modules.conf to uncomment mod_python, did a make and make install (i did a backup of my conf folder before)! The make and make install worked flawlessly. Then i put back my bkp of conf directory.<BR>
<BR>
I restarted the freeswitch service, created my python test dialplan and entered into cli to see what's gonna happen! To my surprise, the call didn't processed to the extension i was dialing.<BR>
<BR>
i tried all the other extensions i had, they were all not working!!!!<BR>
<BR>
After that i realized that the .xml in freeswitch/dialplan/default/ weren't imported into configuration at startup ... <BR>
<BR>
I have read all the documentation about difference between public and default dialplan and i understand them correctly, in public if i include all default folder, it's working again (i can reach all my extensions in default.<BR>
<BR>
My extensions are in the correct user_context ... i did nothing since yesterday other than a make && make install after enabling python ...<BR>
<BR>
Any other user have an idea why the default/*.xml aren't processed automatically? What could i have done wrong so they are no longer processed?<BR>
<BR>
<BR>
</BLOCKQUOTE>
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
<BR>
double-check for the existence of conf/dialplan/default.xml - I've seen on rare occasion where that file simple goes away for no apparent reason. Since I never change that file - and I recommend that you never change it either ;) - you can go to your FS source directory and issue "make samples" and it will re-create any missing default config files without overwriting you existing config files.<BR>
-MC<BR>
<BR>
</BLOCKQUOTE>
<BLOCKQUOTE TYPE=CITE>
<BR>
</BLOCKQUOTE>
<P><B><FONT face="Trebuchet MS" size=2>
<HR>
</FONT></B><B><FONT face=Arial size=2><A
href="http://www.rsslex.com">http://www.rsslex.com</A></FONT></B><B> </B>
<P></P>
<P><B><FONT face="Trebuchet MS" size=1>AVIS:</FONT></B> <FONT
face="Trebuchet MS" size=1>Ce courriel privilégié et confidentiel est destiné à
la seule personne ou entité à laquelle il est adressé. Pour toute autre
personne, toute action prise en rapport à ce courriel ainsi que toute lecture,
reproduction, transmission et/ou divulgation d'une partie ou de l'ensemble de
celui-ci est interdite. Si vous n'êtes pas la personne autorisée à recevoir ce
courriel, S.V.P. le retourner à l'expéditeur et le détruire. Bien que ce
courriel ait été traité contre les virus, il est de la responsabilité du
destinataire de s'assurer que l'envoi en est exempt. Nos communications avec
vous peuvent contenir des renseignements confidentiels ou protégés par le secret
professionnel. Si vous désirez que nous communiquions avec vous par un autre
moyen de transmission que le courrier électronique ordinaire non sécurisé,
veuillez nous en aviser. </FONT></P>
<P><B><FONT face="Trebuchet MS" size=1>NOTICE:</FONT></B> <FONT
face="Trebuchet MS" size=1>This privileged and confidential email is intended
only for the individual or entity to whom it is addressed. With regard to all
others, any action related with this email as well as any reading, reproduction,
transmission and/or dissemination in whole or in part of the information
included in this email is prohibited. If you are not the addressee, immediately
return the email to sender prior to destroying all copies. Even if this email is
believed to be free from any virus, it is the responsibility of the recipient to
make sure that it is virus exempt. Our communications to you may contain
confidential information or information protected under solicitor-client
privilege. Please advise if you wish us to use a mode of communication other
than regular, unsecured e-mail in our communications with
you.</FONT></P>
</BODY>
</HTML>