From sdevoy at bizfocused.com  Thu Jan  6 20:13:40 2022
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Thu, 6 Jan 2022 20:13:40 +0000
Subject: Outbound Gateway hang up at 30 seconds with no answer
Message-ID: <DM5PR0102MB34326FB50130DF586F0CBA58BB4C9@DM5PR0102MB3432.prod.exchangelabs.com>

My users are complaining that SOME (not all) outbound calls ring 4 times, then go to busy signal.  The FS log shows connection and status "entering state [early][183]" then 21 seconds later "Originate Failed.  Cause: NO_ANSWER", then hang-up.  It should at least go to the receiving ends voice mail.

Why hang-up?
Why busy signal?

Bridge string is:
bridge(mailto:{sip_from_uri=4104440002 at 64.136.173.30,sip_from_user=4104440002,sip_from_host=64.136.173.30}sofia/gateway/voip-innovations-outbound/14432997994)

FreeSWITCH version: 1.10.2-release-14-f7bdd3845a~64bit (-release-14-f7bdd3845a 64bit)

Any ideas would be a  great help.

Regards,
Sean


From sdevoy at bizfocused.com  Thu Jan  6 20:27:35 2022
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Thu, 6 Jan 2022 20:27:35 +0000
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no
 answer
In-Reply-To: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
Message-ID: <DM5PR0102MB343252209A1FA02295F1B446BB4C9@DM5PR0102MB3432.prod.exchangelabs.com>

UPDATE: Per Voip Innovations:  
	"Per our CDRs, we routed out your call to our carrier in route. The call had 20 seconds of ringing before we received a BYE request from your IP"

Why would FS send a bye 20 seconds after "receiving early media"?

-----Original Message-----
From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of Sean Devoy via FreeSWITCH-users
Sent: Thursday, January 6, 2022 3:14 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer

_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com

From david.villasmil.work at gmail.com  Thu Jan  6 20:35:34 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Thu, 6 Jan 2022 20:35:34 +0000
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with
	no answer
In-Reply-To: <mailman.4867.1641500889.1264.freeswitch-users@lists.freeswitch.org>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
 <mailman.4867.1641500889.1264.freeswitch-users@lists.freeswitch.org>
Message-ID: <CAFGRPVrM8d2anzEO_hwn2p-2DUEt3w-eENjjn8oMWi3yjtAgdg@mail.gmail.com>

Talk to your provider, they’re sending a 183 and then the call doesn’t
connect. Doesn’t seem to be on your end if you’re sure you’re getting a 183

On Thu, 6 Jan 2022 at 20:28, Sean Devoy via FreeSWITCH-users <
freeswitch-users at lists.freeswitch.org> wrote:

>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy <sdevoy at bizfocused.com>
> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
> freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 6 Jan 2022 20:27:35 +0000
> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
> UPDATE: Per Voip Innovations:
>         "Per our CDRs, we routed out your call to our carrier in route.
> The call had 20 seconds of ringing before we received a BYE request from
> your IP"
>
> Why would FS send a bye 20 seconds after "receiving early media"?
>
> -----Original Message-----
> From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On
> Behalf Of Sean Devoy via FreeSWITCH-users
> Sent: Thursday, January 6, 2022 3:14 PM
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no
> answer
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>
> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
> freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 06 Jan 2022 12:28:12 -0800 (PST)
> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no   answer
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220106/d9c2fb58/attachment-0001.html>

From david.villasmil.work at gmail.com  Fri Jan  7 01:25:59 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 7 Jan 2022 01:25:59 +0000
Subject: [Freeswitch-users] Mod_limit
Message-ID: <CAFGRPVq=Ww0BXoMA5yUHQORo=GeQX+CzZkTOrwNh-v22vBFu_g@mail.gmail.com>

Hello all,

Using limit has the limitation (as per documentation) that if the call is
transferred, the limit count is totally lost.

Is there no way of working around this?

Thanks all

David
-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/dbc6f64a/attachment.html>

From sdevoy at bizfocused.com  Fri Jan  7 03:36:16 2022
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Fri, 7 Jan 2022 03:36:16 +0000
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no
 answer
In-Reply-To: <CAFGRPVrM8d2anzEO_hwn2p-2DUEt3w-eENjjn8oMWi3yjtAgdg@mail.gmail.com>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
 <mailman.4867.1641500889.1264.freeswitch-users@lists.freeswitch.org>
 <CAFGRPVrM8d2anzEO_hwn2p-2DUEt3w-eENjjn8oMWi3yjtAgdg@mail.gmail.com>
Message-ID: <BL0PR0102MB34259F3F65D88006413A4E15BB4D9@BL0PR0102MB3425.prod.exchangelabs.com>

I see the 183 message in the log. They say it does connect, then 20 seconds later we send “BYE”.

I am at a loss.

From: David Villasmil <david.villasmil.work at gmail.com>
Sent: Thursday, January 6, 2022 3:36 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>; Sean Devoy <sdevoy at bizfocused.com>
Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer

Talk to your provider, they’re sending a 183 and then the call doesn’t connect. Doesn’t seem to be on your end if you’re sure you’re getting a 183

On Thu, 6 Jan 2022 at 20:28, Sean Devoy via FreeSWITCH-users <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>> wrote:



---------- Forwarded message ----------
From: Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>
To: Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>, FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Cc:
Bcc:
Date: Thu, 6 Jan 2022 20:27:35 +0000
Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer
UPDATE: Per Voip Innovations:
        "Per our CDRs, we routed out your call to our carrier in route. The call had 20 seconds of ringing before we received a BYE request from your IP"

Why would FS send a bye 20 seconds after "receiving early media"?

-----Original Message-----
From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org>> On Behalf Of Sean Devoy via FreeSWITCH-users
Sent: Thursday, January 6, 2022 3:14 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer

_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com



---------- Forwarded message ----------
From: Sean Devoy via FreeSWITCH-users <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
To: Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>, FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Cc:
Bcc:
Date: Thu, 06 Jan 2022 12:28:12 -0800 (PST)
Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no   answer
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,

David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/12e394d0/attachment-0001.html>

From cong.wang.itsherpa at gmail.com  Fri Jan  7 04:17:29 2022
From: cong.wang.itsherpa at gmail.com (=?UTF-8?B?546L6IGh?=)
Date: Fri, 7 Jan 2022 13:17:29 +0900
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with
	no answer
In-Reply-To: <mailman.4872.1641526611.1264.freeswitch-users@lists.freeswitch.org>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
 <mailman.4867.1641500889.1264.freeswitch-users@lists.freeswitch.org>
 <CAFGRPVrM8d2anzEO_hwn2p-2DUEt3w-eENjjn8oMWi3yjtAgdg@mail.gmail.com>
 <mailman.4872.1641526611.1264.freeswitch-users@lists.freeswitch.org>
Message-ID: <CANhUmQvX479G1+33nB-j0OvYLLRoHT38hFTYHDkhZ0JtigD_7g@mail.gmail.com>

Check your call_timeout setting, it determines how long the bridge waits
before callee returns reaction.

2022年1月7日(金) 13:13 Sean Devoy via FreeSWITCH-users <
freeswitch-users at lists.freeswitch.org>:

>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy <sdevoy at bizfocused.com>
> To: David Villasmil <david.villasmil.work at gmail.com>, FreeSWITCH Users
> Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Fri, 7 Jan 2022 03:36:16 +0000
> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
>
> I see the 183 message in the log. They say it does connect, then 20
> seconds later we send “BYE”.
>
>
>
> I am at a loss.
>
>
>
> *From:* David Villasmil <david.villasmil.work at gmail.com>
> *Sent:* Thursday, January 6, 2022 3:36 PM
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>; Sean
> Devoy <sdevoy at bizfocused.com>
> *Subject:* Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
>
>
>
> Talk to your provider, they’re sending a 183 and then the call doesn’t
> connect. Doesn’t seem to be on your end if you’re sure you’re getting a 183
>
>
>
> On Thu, 6 Jan 2022 at 20:28, Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org> wrote:
>
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy <sdevoy at bizfocused.com>
> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
> freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 6 Jan 2022 20:27:35 +0000
> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
> UPDATE: Per Voip Innovations:
>         "Per our CDRs, we routed out your call to our carrier in route.
> The call had 20 seconds of ringing before we received a BYE request from
> your IP"
>
> Why would FS send a bye 20 seconds after "receiving early media"?
>
> -----Original Message-----
> From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On
> Behalf Of Sean Devoy via FreeSWITCH-users
> Sent: Thursday, January 6, 2022 3:14 PM
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no
> answer
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>
> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
> freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 06 Jan 2022 12:28:12 -0800 (PST)
> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no   answer
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> --
>
> Regards,
>
>
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
>
> phone: +34669448337
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>
> To: David Villasmil <david.villasmil.work at gmail.com>, FreeSWITCH Users
> Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 06 Jan 2022 20:13:09 -0800 (PST)
> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/68a0798e/attachment.html>

From avi at avimarcus.net  Fri Jan  7 07:03:05 2022
From: avi at avimarcus.net (Avi Marcus)
Date: Fri, 7 Jan 2022 07:03:05 +0000
Subject: [Freeswitch-users] Mod_limit
In-Reply-To: <CAFGRPVq=Ww0BXoMA5yUHQORo=GeQX+CzZkTOrwNh-v22vBFu_g@mail.gmail.com>
References: <CAFGRPVq=Ww0BXoMA5yUHQORo=GeQX+CzZkTOrwNh-v22vBFu_g@mail.gmail.com>
Message-ID: <0100017e33591eec-5973daec-f548-4326-a489-e3291d493af8-000000@email.amazonses.com>

The wiki
<https://freeswitch.org/confluence/display/FREESWITCH/mod_dptools%3A+limit>
shows
a configuration switch to keep the limit through a transfer:

Variables That Affect Limit: *limit_ignore_transfer=true* - causes the
current call count to not be reset when the call is transferred. This is
useful where calls that come into a gateway are transferred to an
extension, but you want to preserve the call count.

-Avi Marcus



On Fri, Jan 7, 2022 at 3:27 AM David Villasmil <
david.villasmil.work at gmail.com> wrote:

> Hello all,
>
> Using limit has the limitation (as per documentation) that if the call is
> transferred, the limit count is totally lost.
>
> Is there no way of working around this?
>
> Thanks all
>
> David
> --
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/133bc700/attachment.html>

From david.villasmil.work at gmail.com  Fri Jan  7 09:33:37 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 7 Jan 2022 09:33:37 +0000
Subject: [Freeswitch-users] Mod_limit
In-Reply-To: <0100017e33591eec-5973daec-f548-4326-a489-e3291d493af8-000000@email.amazonses.com>
References: <CAFGRPVq=Ww0BXoMA5yUHQORo=GeQX+CzZkTOrwNh-v22vBFu_g@mail.gmail.com>
 <0100017e33591eec-5973daec-f548-4326-a489-e3291d493af8-000000@email.amazonses.com>
Message-ID: <CAFGRPVoOok5S=6nUi+T6QPYp6RNoMaxvuJ5sOrA0FNyk7yDQug@mail.gmail.com>

Yeah I saw that, but that’s not working for me. The count is lost if I
transfer the call. I’ll give another test, maybe I did something wrong.

Thanks Avi

On Fri, 7 Jan 2022 at 07:04, Avi Marcus <avi at avimarcus.net> wrote:

> The wiki
> <https://freeswitch.org/confluence/display/FREESWITCH/mod_dptools%3A+limit> shows
> a configuration switch to keep the limit through a transfer:
>
> Variables That Affect Limit: *limit_ignore_transfer=true* - causes the
> current call count to not be reset when the call is transferred. This is
> useful where calls that come into a gateway are transferred to an
> extension, but you want to preserve the call count.
>
> -Avi Marcus
>
>
>
> On Fri, Jan 7, 2022 at 3:27 AM David Villasmil <
> david.villasmil.work at gmail.com> wrote:
>
>> Hello all,
>>
>> Using limit has the limitation (as per documentation) that if the call is
>> transferred, the limit count is totally lost.
>>
>> Is there no way of working around this?
>>
>> Thanks all
>>
>> David
>> --
>> Regards,
>>
>> David Villasmil
>> email: david.villasmil.work at gmail.com
>> phone: +34669448337
>>
> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/5d431899/attachment-0001.html>

From david.villasmil.work at gmail.com  Fri Jan  7 09:34:48 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 7 Jan 2022 09:34:48 +0000
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with
	no answer
In-Reply-To: <CANhUmQvX479G1+33nB-j0OvYLLRoHT38hFTYHDkhZ0JtigD_7g@mail.gmail.com>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
 <mailman.4867.1641500889.1264.freeswitch-users@lists.freeswitch.org>
 <CAFGRPVrM8d2anzEO_hwn2p-2DUEt3w-eENjjn8oMWi3yjtAgdg@mail.gmail.com>
 <mailman.4872.1641526611.1264.freeswitch-users@lists.freeswitch.org>
 <CANhUmQvX479G1+33nB-j0OvYLLRoHT38hFTYHDkhZ0JtigD_7g@mail.gmail.com>
Message-ID: <CAFGRPVoApnMFO61fKJd7Ng-7CBjHNaDRjBvb5jqX5oXvyDPa3g@mail.gmail.com>

I’d say stop guessing and the a proper trace

On Fri, 7 Jan 2022 at 04:18, 王聡 <cong.wang.itsherpa at gmail.com> wrote:

> Check your call_timeout setting, it determines how long the bridge waits
> before callee returns reaction.
>
> 2022年1月7日(金) 13:13 Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>:
>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Sean Devoy <sdevoy at bizfocused.com>
>> To: David Villasmil <david.villasmil.work at gmail.com>, FreeSWITCH Users
>> Help <freeswitch-users at lists.freeswitch.org>
>> Cc:
>> Bcc:
>> Date: Fri, 7 Jan 2022 03:36:16 +0000
>> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
>> with no answer
>>
>> I see the 183 message in the log. They say it does connect, then 20
>> seconds later we send “BYE”.
>>
>>
>>
>> I am at a loss.
>>
>>
>>
> *From:* David Villasmil <david.villasmil.work at gmail.com>
>> *Sent:* Thursday, January 6, 2022 3:36 PM
>> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>;
>> Sean Devoy <sdevoy at bizfocused.com>
>> *Subject:* Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
>> with no answer
>>
>>
>>
>> Talk to your provider, they’re sending a 183 and then the call doesn’t
>> connect. Doesn’t seem to be on your end if you’re sure you’re getting a 183
>>
>>
>>
>> On Thu, 6 Jan 2022 at 20:28, Sean Devoy via FreeSWITCH-users <
>> freeswitch-users at lists.freeswitch.org> wrote:
>>
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Sean Devoy <sdevoy at bizfocused.com>
>> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
>> freeswitch-users at lists.freeswitch.org>
>> Cc:
>> Bcc:
>> Date: Thu, 6 Jan 2022 20:27:35 +0000
>> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
>> with no answer
>> UPDATE: Per Voip Innovations:
>>         "Per our CDRs, we routed out your call to our carrier in route.
>> The call had 20 seconds of ringing before we received a BYE request from
>> your IP"
>>
>> Why would FS send a bye 20 seconds after "receiving early media"?
>>
>> -----Original Message-----
>> From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org>
>> On Behalf Of Sean Devoy via FreeSWITCH-users
>> Sent: Thursday, January 6, 2022 3:14 PM
>> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with
>> no answer
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>>
>>
>>
>> ---------- Forwarded message ----------
>> From: Sean Devoy via FreeSWITCH-users <
>> freeswitch-users at lists.freeswitch.org>
>> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
>> freeswitch-users at lists.freeswitch.org>
>> Cc:
>> Bcc:
>> Date: Thu, 06 Jan 2022 12:28:12 -0800 (PST)
>> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
>> with no   answer
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>>
>> --
>>
>> Regards,
>>
>>
>>
>> David Villasmil
>>
>> email: david.villasmil.work at gmail.com
>>
>> phone: +34669448337
>>
>
>>
>>
>> ---------- Forwarded message ----------
>> From: Sean Devoy via FreeSWITCH-users <
>> freeswitch-users at lists.freeswitch.org>
>> To: David Villasmil <david.villasmil.work at gmail.com>, FreeSWITCH Users
>> Help <freeswitch-users at lists.freeswitch.org>
>> Cc:
>> Bcc:
>> Date: Thu, 06 Jan 2022 20:13:09 -0800 (PST)
>> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
>> with no answer
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/6d03e5a8/attachment.html>

From david.villasmil.work at gmail.com  Fri Jan  7 13:49:17 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 7 Jan 2022 13:49:17 +0000
Subject: [Freeswitch-users] Mod_limit
In-Reply-To: <CAFGRPVoOok5S=6nUi+T6QPYp6RNoMaxvuJ5sOrA0FNyk7yDQug@mail.gmail.com>
References: <CAFGRPVq=Ww0BXoMA5yUHQORo=GeQX+CzZkTOrwNh-v22vBFu_g@mail.gmail.com>
 <0100017e33591eec-5973daec-f548-4326-a489-e3291d493af8-000000@email.amazonses.com>
 <CAFGRPVoOok5S=6nUi+T6QPYp6RNoMaxvuJ5sOrA0FNyk7yDQug@mail.gmail.com>
Message-ID: <CAFGRPVqV6wdtUE+RwOM6FfEkNzz+UCV7vgzzTbkNjdQwARMX0g@mail.gmail.com>

Yeah, my problem actually is that is the client makes a call, then put it
on hold and make a second call, likit shows 2 which is good. Then if the
calls are merged into a conference by a refer and a transfer, only 1
remains.

And while I’m writing this, I realize I need to increase the limit in the
extension handling the refer…

I’ll come back with results.

Thanks Avi

On Fri, 7 Jan 2022 at 09:33, David Villasmil <david.villasmil.work at gmail.com>
wrote:

> Yeah I saw that, but that’s not working for me. The count is lost if I
> transfer the call. I’ll give another test, maybe I did something wrong.
>
> Thanks Avi
>
> On Fri, 7 Jan 2022 at 07:04, Avi Marcus <avi at avimarcus.net> wrote:
>
>> The wiki
>> <https://freeswitch.org/confluence/display/FREESWITCH/mod_dptools%3A+limit> shows
>> a configuration switch to keep the limit through a transfer:
>>
>> Variables That Affect Limit: *limit_ignore_transfer=true* - causes the
>> current call count to not be reset when the call is transferred. This is
>> useful where calls that come into a gateway are transferred to an
>> extension, but you want to preserve the call count.
>>
>> -Avi Marcus
>>
>>
>>
>> On Fri, Jan 7, 2022 at 3:27 AM David Villasmil <
>> david.villasmil.work at gmail.com> wrote:
>>
>>> Hello all,
>>>
>>> Using limit has the limitation (as per documentation) that if the call
>>> is transferred, the limit count is totally lost.
>>>
>>> Is there no way of working around this?
>>>
>>> Thanks all
>>>
>>> David
>>> --
>>> Regards,
>>>
>>> David Villasmil
>>> email: david.villasmil.work at gmail.com
>>> phone: +34669448337
>>>
>> _________________________________________________________________________
>>>
>>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>>> services.
>>> Build your next product on our scalable cloud platform.
>>>
>>> Join our online community to chat in real time
>>> https://signalwire.community
>>>
>>> Professional FreeSWITCH Services
>>> sales at freeswitch.com
>>> https://freeswitch.com
>>>
>>> Official FreeSWITCH Sites
>>> https://freeswitch.com/oss
>>> https://freeswitch.org/confluence
>>> https://cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> https://freeswitch.com
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> --
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
>
-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/de1655a7/attachment.html>

From sdevoy at bizfocused.com  Fri Jan  7 17:48:04 2022
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Fri, 7 Jan 2022 17:48:04 +0000
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with	no
 answer
In-Reply-To: <CAFGRPVoApnMFO61fKJd7Ng-7CBjHNaDRjBvb5jqX5oXvyDPa3g@mail.gmail.com>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
 <mailman.4867.1641500889.1264.freeswitch-users@lists.freeswitch.org>
 <CAFGRPVrM8d2anzEO_hwn2p-2DUEt3w-eENjjn8oMWi3yjtAgdg@mail.gmail.com>
 <mailman.4872.1641526611.1264.freeswitch-users@lists.freeswitch.org>
 <CANhUmQvX479G1+33nB-j0OvYLLRoHT38hFTYHDkhZ0JtigD_7g@mail.gmail.com>
 <CAFGRPVoApnMFO61fKJd7Ng-7CBjHNaDRjBvb5jqX5oXvyDPa3g@mail.gmail.com>
Message-ID: <BL0PR0102MB3425FEE54E742F1AF7DEE8CFBB4D9@BL0PR0102MB3425.prod.exchangelabs.com>

OK, thanks. I will review wireshark commands again.  I assume all sip to/from the gateway IP??

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Friday, January 7, 2022 4:35 AM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer

I’d say stop guessing and the a proper trace

On Fri, 7 Jan 2022 at 04:18, 王聡 <cong.wang.itsherpa at gmail.com<mailto:cong.wang.itsherpa at gmail.com>> wrote:
Check your call_timeout setting, it determines how long the bridge waits before callee returns reaction.

2022年1月7日(金) 13:13 Sean Devoy via FreeSWITCH-users <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>:



---------- Forwarded message ----------
From: Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>
To: David Villasmil <david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>>, FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Cc:
Bcc:
Date: Fri, 7 Jan 2022 03:36:16 +0000
Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer
I see the 183 message in the log. They say it does connect, then 20 seconds later we send “BYE”.

I am at a loss.

From: David Villasmil <david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>>
Sent: Thursday, January 6, 2022 3:36 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>; Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>
Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer

Talk to your provider, they’re sending a 183 and then the call doesn’t connect. Doesn’t seem to be on your end if you’re sure you’re getting a 183

On Thu, 6 Jan 2022 at 20:28, Sean Devoy via FreeSWITCH-users <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>> wrote:



---------- Forwarded message ----------
From: Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>
To: Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>, FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Cc:
Bcc:
Date: Thu, 6 Jan 2022 20:27:35 +0000
Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer
UPDATE: Per Voip Innovations:
        "Per our CDRs, we routed out your call to our carrier in route. The call had 20 seconds of ringing before we received a BYE request from your IP"

Why would FS send a bye 20 seconds after "receiving early media"?

-----Original Message-----
From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org>> On Behalf Of Sean Devoy via FreeSWITCH-users
Sent: Thursday, January 6, 2022 3:14 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer

_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com



---------- Forwarded message ----------
From: Sean Devoy via FreeSWITCH-users <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
To: Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>>, FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Cc:
Bcc:
Date: Thu, 06 Jan 2022 12:28:12 -0800 (PST)
Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no   answer
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,

David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337



---------- Forwarded message ----------
From: Sean Devoy via FreeSWITCH-users <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
To: David Villasmil <david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>>, FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Cc:
Bcc:
Date: Thu, 06 Jan 2022 20:13:09 -0800 (PST)
Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no answer
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,

David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/08b20620/attachment-0001.html>

From david.villasmil.work at gmail.com  Fri Jan  7 21:33:31 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 7 Jan 2022 21:33:31 +0000
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with
	no answer
In-Reply-To: <mailman.4878.1641577718.1264.freeswitch-users@lists.freeswitch.org>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
 <mailman.4867.1641500889.1264.freeswitch-users@lists.freeswitch.org>
 <CAFGRPVrM8d2anzEO_hwn2p-2DUEt3w-eENjjn8oMWi3yjtAgdg@mail.gmail.com>
 <mailman.4872.1641526611.1264.freeswitch-users@lists.freeswitch.org>
 <CANhUmQvX479G1+33nB-j0OvYLLRoHT38hFTYHDkhZ0JtigD_7g@mail.gmail.com>
 <CAFGRPVoApnMFO61fKJd7Ng-7CBjHNaDRjBvb5jqX5oXvyDPa3g@mail.gmail.com>
 <mailman.4878.1641577718.1264.freeswitch-users@lists.freeswitch.org>
Message-ID: <CAFGRPVqxoBzcXkHyRRcifE3y-tKbn3X=Bdrt3Uw9CB4b0_duSQ@mail.gmail.com>

yeah, if you're using tshark, something like:

tshark -f "host [GATEWAY-IP]" -i any

will show you anything going/coming from that ip address.

you can also install sngrep, which is a fantastic cli tool. it's in
debian's repos. You  start it with "sngrep -c" to show only [c]alls

Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337


On Fri, Jan 7, 2022 at 5:48 PM Sean Devoy via FreeSWITCH-users <
freeswitch-users at lists.freeswitch.org> wrote:

>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy <sdevoy at bizfocused.com>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Fri, 7 Jan 2022 17:48:04 +0000
> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with      no answer
>
> OK, thanks. I will review wireshark commands again.  I assume all sip
> to/from the gateway IP??
>
>
>
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> *On
> Behalf Of *David Villasmil
> *Sent:* Friday, January 7, 2022 4:35 AM
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
>
>
>
> I’d say stop guessing and the a proper trace
>
>
>
> On Fri, 7 Jan 2022 at 04:18, 王聡 <cong.wang.itsherpa at gmail.com> wrote:
>
> Check your call_timeout setting, it determines how long the bridge waits
> before callee returns reaction.
>
>
>
> 2022年1月7日(金) 13:13 Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>:
>
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy <sdevoy at bizfocused.com>
> To: David Villasmil <david.villasmil.work at gmail.com>, FreeSWITCH Users
> Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Fri, 7 Jan 2022 03:36:16 +0000
> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
>
> I see the 183 message in the log. They say it does connect, then 20
> seconds later we send “BYE”.
>
>
>
> I am at a loss.
>
>
>
> *From:* David Villasmil <david.villasmil.work at gmail.com>
> *Sent:* Thursday, January 6, 2022 3:36 PM
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>; Sean
> Devoy <sdevoy at bizfocused.com>
> *Subject:* Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
>
>
>
> Talk to your provider, they’re sending a 183 and then the call doesn’t
> connect. Doesn’t seem to be on your end if you’re sure you’re getting a 183
>
>
>
> On Thu, 6 Jan 2022 at 20:28, Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org> wrote:
>
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy <sdevoy at bizfocused.com>
> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
> freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 6 Jan 2022 20:27:35 +0000
> Subject: RE: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
> UPDATE: Per Voip Innovations:
>         "Per our CDRs, we routed out your call to our carrier in route.
> The call had 20 seconds of ringing before we received a BYE request from
> your IP"
>
> Why would FS send a bye 20 seconds after "receiving early media"?
>
> -----Original Message-----
> From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On
> Behalf Of Sean Devoy via FreeSWITCH-users
> Sent: Thursday, January 6, 2022 3:14 PM
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with no
> answer
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>
> To: Sean Devoy <sdevoy at bizfocused.com>, FreeSWITCH Users Help <
> freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 06 Jan 2022 12:28:12 -0800 (PST)
> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no   answer
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> --
>
> Regards,
>
>
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
>
> phone: +34669448337
>
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>
> To: David Villasmil <david.villasmil.work at gmail.com>, FreeSWITCH Users
> Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Thu, 06 Jan 2022 20:13:09 -0800 (PST)
> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with no answer
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> --
>
> Regards,
>
>
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
>
> phone: +34669448337
>
>
>
> ---------- Forwarded message ----------
> From: Sean Devoy via FreeSWITCH-users <
> freeswitch-users at lists.freeswitch.org>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Fri, 07 Jan 2022 09:48:41 -0800 (PST)
> Subject: Re: [Freeswitch-users] Outbound Gateway hang up at 30 seconds
> with      no answer
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220107/7a064de6/attachment-0001.html>

From Antony.Stone at freeswitch.open.source.it  Fri Jan  7 21:55:53 2022
From: Antony.Stone at freeswitch.open.source.it (Antony Stone)
Date: Fri, 7 Jan 2022 22:55:53 +0100
Subject: [Freeswitch-users] Outbound Gateway hang up at 30 seconds with
	no answer
In-Reply-To: <CAFGRPVqxoBzcXkHyRRcifE3y-tKbn3X=Bdrt3Uw9CB4b0_duSQ@mail.gmail.com>
References: <mailman.4866.1641500053.1264.freeswitch-users@lists.freeswitch.org>
 <mailman.4878.1641577718.1264.freeswitch-users@lists.freeswitch.org>
 <CAFGRPVqxoBzcXkHyRRcifE3y-tKbn3X=Bdrt3Uw9CB4b0_duSQ@mail.gmail.com>
Message-ID: <202201072255.53485.Antony.Stone@freeswitch.open.source.it>

On Friday 07 January 2022 at 22:33:31, David Villasmil wrote:

> yeah, if you're using tshark, something like:
> 
> tshark -f "host [GATEWAY-IP]" -i any
> 
> will show you anything going/coming from that ip address.
> 
> you can also install sngrep, which is a fantastic cli tool. it's in
> debian's repos. You  start it with "sngrep -c" to show only [c]alls

I would also advocate doing both.

1. Install sngrep, and if you don't already have them, tshark and/or tcpdump

2. Use tshark (or tcpdump) to capture SIP traffic (which normally means 
"anything on port 5060, in either direction"), so:

	tshark -f "port 5060" -i any -w capturefile.pcap

3. Then you can use sngrep to read the file which tshark created, and at your 
leisure, scroll through the traffic and try to understand what happened when:

	sngrep -I capturefile.pcap

sngrep is a splendid tool, but SIP is not a simple protocol, so having a 
capture file you can go back to later, whenever you want to, and understand a 
bit more about it (or answer other people's questions if they ask "well, what 
was the response to this, then?") is very useful.


Antony.

-- 
Some things the German language doesn't easily distinguish between:
 - slugs and snails
 - cucumbers and gherkins
 - snakes and queues
 - wearing something, or carrying it
 - mothers and nuts
 - driving a car, riding a bicycle, or travelling by train
 - a man and a husband
 - a woman and a wife
 - changing clothes and moving house
 - pockets and bags

                                                   Please reply to the list;
                                                         please *don't* CC me.


From sarkmobilesolutions at gmail.com  Mon Jan 10 12:30:14 2022
From: sarkmobilesolutions at gmail.com (Sark Mobiles)
Date: Mon, 10 Jan 2022 18:00:14 +0530
Subject: [Freeswitch-users] How to change outbound code for mod_conference ?
Message-ID: <CAJuiBy9GpcL3Vn0JqxpCp47oQ7XCrgj+TyjOxJiPSimp3e0UgA@mail.gmail.com>

Hello,

When a conference is initiated, the incoming codec is L16/8000, which is
missing from the available codecs in Android app and thus exception is
thrown. When an individual call is made, the inbound codec is PCMA/8000 and
that works fine. Please let me know how to change inbound codec of
conference call to PCMA ?

Appreciate your help.

Regards,
Krishnan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220110/6b2b803a/attachment.html>

From david.villasmil.work at gmail.com  Mon Jan 10 13:30:53 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Mon, 10 Jan 2022 13:30:53 +0000
Subject: [Freeswitch-users] How to change outbound code for
	mod_conference ?
In-Reply-To: <CAJuiBy9GpcL3Vn0JqxpCp47oQ7XCrgj+TyjOxJiPSimp3e0UgA@mail.gmail.com>
References: <CAJuiBy9GpcL3Vn0JqxpCp47oQ7XCrgj+TyjOxJiPSimp3e0UgA@mail.gmail.com>
Message-ID: <CAFGRPVr-FC9i1A90Ce8hxorbfs+ivB80QdPVwQOrDd-zF4t=dA@mail.gmail.com>

Not sure we understand what you mean. What does the SDP contain?
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337


On Mon, Jan 10, 2022 at 12:31 PM Sark Mobiles <sarkmobilesolutions at gmail.com>
wrote:

> Hello,
>
> When a conference is initiated, the incoming codec is L16/8000, which is
> missing from the available codecs in Android app and thus exception is
> thrown. When an individual call is made, the inbound codec is PCMA/8000 and
> that works fine. Please let me know how to change inbound codec of
> conference call to PCMA ?
>
> Appreciate your help.
>
> Regards,
> Krishnan
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220110/3e07dac9/attachment.html>

From dragos at freeswitch.org  Mon Jan 10 14:22:44 2022
From: dragos at freeswitch.org (Dragos Oancea)
Date: Mon, 10 Jan 2022 16:22:44 +0200
Subject: [Freeswitch-users] How to change outbound code for
	mod_conference ?
In-Reply-To: <CAFGRPVr-FC9i1A90Ce8hxorbfs+ivB80QdPVwQOrDd-zF4t=dA@mail.gmail.com>
References: <CAJuiBy9GpcL3Vn0JqxpCp47oQ7XCrgj+TyjOxJiPSimp3e0UgA@mail.gmail.com>
 <CAFGRPVr-FC9i1A90Ce8hxorbfs+ivB80QdPVwQOrDd-zF4t=dA@mail.gmail.com>
Message-ID: <CAGvJV4o2pmr4D0uZ3VcOPhcppBRrd53Qi9wsUta1Vw7r=53+4w@mail.gmail.com>

Just add or change the list of codecs that FreeSWITCH uses.
https://freeswitch.org/confluence/display/FREESWITCH/absolute_codec_string

On Mon, Jan 10, 2022 at 3:31 PM David Villasmil <
david.villasmil.work at gmail.com> wrote:

> Not sure we understand what you mean. What does the SDP contain?
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
>
>
> On Mon, Jan 10, 2022 at 12:31 PM Sark Mobiles <
> sarkmobilesolutions at gmail.com> wrote:
>
>> Hello,
>>
>> When a conference is initiated, the incoming codec is L16/8000, which is
>> missing from the available codecs in Android app and thus exception is
>> thrown. When an individual call is made, the inbound codec is PCMA/8000 and
>> that works fine. Please let me know how to change inbound codec of
>> conference call to PCMA ?
>>
>> Appreciate your help.
>>
>> Regards,
>> Krishnan
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220110/9a727593/attachment.html>

From davidswalkabout at gmail.com  Tue Jan 11 23:38:30 2022
From: davidswalkabout at gmail.com (David P)
Date: Wed, 12 Jan 2022 12:38:30 +1300
Subject: [Freeswitch-users] Chrome 98 beta rejects Lets Encrypt certs for
	verto
Message-ID: <CAE23truaegHnwvWS0WY2peO=_O2t57qGsoaWKnUsFAuk+dvntg@mail.gmail.com>

FYI, we just noticed that Chrome 98 beta rejects these certs as "lost
sleep", and the FS 1.10.7 log shows "BAD READ -1". But Chrome 97 and
Firefox do not show these problems.

We haven't found a resolution nor bug report, but I'll followup if we do.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220112/a56e8d1f/attachment.html>

From davidswalkabout at gmail.com  Tue Jan 11 23:52:45 2022
From: davidswalkabout at gmail.com (David P)
Date: Wed, 12 Jan 2022 12:52:45 +1300
Subject: [Freeswitch-users] Chrome 98 beta rejects Lets Encrypt certs
	for verto
In-Reply-To: <CAE23truaegHnwvWS0WY2peO=_O2t57qGsoaWKnUsFAuk+dvntg@mail.gmail.com>
References: <CAE23truaegHnwvWS0WY2peO=_O2t57qGsoaWKnUsFAuk+dvntg@mail.gmail.com>
Message-ID: <CAE23trshVafcAZyGMZbyTnSaMKMEmrLPoLORjz=VvvDqrnpTuw@mail.gmail.com>

FYI, we support only TLSv1.2

On Wed, Jan 12, 2022 at 12:38 PM David P <davidswalkabout at gmail.com> wrote:

> FYI, we just noticed that Chrome 98 beta rejects these certs as "lost
> sleep", and the FS 1.10.7 log shows "BAD READ -1". But Chrome 97 and
> Firefox do not show these problems.
>
> We haven't found a resolution nor bug report, but I'll followup if we do.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220112/3f95354c/attachment.html>

From davidswalkabout at gmail.com  Wed Jan 12 03:10:03 2022
From: davidswalkabout at gmail.com (David P)
Date: Wed, 12 Jan 2022 16:10:03 +1300
Subject: [Freeswitch-users] Chrome 98 beta rejects Lets Encrypt certs
	for verto
In-Reply-To: <CAE23trshVafcAZyGMZbyTnSaMKMEmrLPoLORjz=VvvDqrnpTuw@mail.gmail.com>
References: <CAE23truaegHnwvWS0WY2peO=_O2t57qGsoaWKnUsFAuk+dvntg@mail.gmail.com>
 <CAE23trshVafcAZyGMZbyTnSaMKMEmrLPoLORjz=VvvDqrnpTuw@mail.gmail.com>
Message-ID: <CAE23trtm4x7FmwY=D47QromDUNxc+cAKUiBq_fTfiwaGL=0ifw@mail.gmail.com>

In our FS1.10.7 log, this sequence occurs repeatedly with Chrome98 Beta but
not Chrome97 Stable...

-----------------------------------------------------------------------------------
2022-01-12 02:33:29.525407 98.60% [DEBUG] mod_verto.c:607 WRITE
151.210.x.y:4790 [{
        "jsonrpc":      "2.0",
        "id":   3,
        "result":       {
                "message":      "logged in",
                "sessid":       "97524066-1470-4aca-b143-a04c4eaceed9"
        }
}]
2022-01-12 02:33:29.565399 98.60% [DEBUG] mod_verto.c:607 WRITE
151.210.x.y:4790 [{
        "jsonrpc":      "2.0",
        "id":   501,
        "method":       "verto.clientReady",
        "params":       {
                "reattached_sessions":  []
        }
}]
2022-01-12 02:33:40.565395 98.83% [WARNING] mod_verto.c:1904
151.210.x.y:4790 BAD READ -1
2022-01-12 02:33:40.565395 98.83% [DEBUG] mod_verto.c:2045 151.210.x.y:4790
Ending client thread.
2022-01-12 02:33:40.565395 98.83% [DEBUG] mod_verto.c:2053 151.210.x.y:4790
Thread ended
2022-01-12 02:33:41.785412 98.87% [DEBUG] mod_verto.c:4273
151.210.x.y:33838 Client Connect from 151.210.x.y:33838 accepted
2022-01-12 02:33:41.785412 98.87% [DEBUG] mod_verto.c:2018
151.210.x.y:33838 Starting client thread.
2022-01-12 02:33:44.045410 98.90% [DEBUG] mod_verto.c:1414 READ
151.210.x.y:33838 [{
        "jsonrpc":      "2.0",
        "method":       "login",
        "params":       {
                "sessid":       "97524066-1470-4aca-b143-a04c4eaceed9"
        },
        "id":   4
}]
-----------------------------------------------------------------------------------

We're running on Debian 10 (which I believe is recommended for FS1.10.7)
with OpenSSL 1.1.1d (the most recent available for Debian 10).

https://www.ssllabs.com/ssltest/analyze.html gives our site an 'A' rating
and all its tests for TLSv1.2 pass.

I've collected .har files from Chrome DevTools' Network pane for WS, and
I've collected .pcap's, for both browser versions. I don't see any error
traffic, only reprompts from FS to login again.

Why would "BAD READ" occur *in FS* with a newer version of Chrome but not
with an older one nor with Firefox ?

On Wed, Jan 12, 2022 at 12:52 PM David P <davidswalkabout at gmail.com> wrote:

> FYI, we support only TLSv1.2
>
> On Wed, Jan 12, 2022 at 12:38 PM David P <davidswalkabout at gmail.com>
> wrote:
>
>> FYI, we just noticed that Chrome 98 beta rejects these certs as "lost
>> sleep", and the FS 1.10.7 log shows "BAD READ -1". But Chrome 97 and
>> Firefox do not show these problems.
>>
>> We haven't found a resolution nor bug report, but I'll followup if we do.
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220112/e15e7e38/attachment.html>

From davidswalkabout at gmail.com  Wed Jan 12 22:05:13 2022
From: davidswalkabout at gmail.com (David P)
Date: Thu, 13 Jan 2022 11:05:13 +1300
Subject: [Freeswitch-users] Chrome 98 beta rejects Lets Encrypt certs
	for verto
In-Reply-To: <CAE23trtm4x7FmwY=D47QromDUNxc+cAKUiBq_fTfiwaGL=0ifw@mail.gmail.com>
References: <CAE23truaegHnwvWS0WY2peO=_O2t57qGsoaWKnUsFAuk+dvntg@mail.gmail.com>
 <CAE23trshVafcAZyGMZbyTnSaMKMEmrLPoLORjz=VvvDqrnpTuw@mail.gmail.com>
 <CAE23trtm4x7FmwY=D47QromDUNxc+cAKUiBq_fTfiwaGL=0ifw@mail.gmail.com>
Message-ID: <CAE23trsTXvUVi9sFvf9PDTL-YYkS-Z8071Aumm3-=nbZt2Eo5A@mail.gmail.com>

Our FS 1.10.7 logging level is set to max verbosity, but we don't see the
logging done in
https://github.com/signalwire/libks/blob/8af0d72d07a120140dc8b3d695089beec5950e81/src/kws.c
even though we're using mod_verto.
How can we make those log stmts appear?

>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220113/bf5e3aaf/attachment.html>

From davidswalkabout at gmail.com  Fri Jan 14 06:59:25 2022
From: davidswalkabout at gmail.com (David P)
Date: Fri, 14 Jan 2022 19:59:25 +1300
Subject: [Freeswitch-users] Chrome 98 beta rejects Lets Encrypt certs
	for verto
In-Reply-To: <CAE23trsTXvUVi9sFvf9PDTL-YYkS-Z8071Aumm3-=nbZt2Eo5A@mail.gmail.com>
References: <CAE23truaegHnwvWS0WY2peO=_O2t57qGsoaWKnUsFAuk+dvntg@mail.gmail.com>
 <CAE23trshVafcAZyGMZbyTnSaMKMEmrLPoLORjz=VvvDqrnpTuw@mail.gmail.com>
 <CAE23trtm4x7FmwY=D47QromDUNxc+cAKUiBq_fTfiwaGL=0ifw@mail.gmail.com>
 <CAE23trsTXvUVi9sFvf9PDTL-YYkS-Z8071Aumm3-=nbZt2Eo5A@mail.gmail.com>
Message-ID: <CAE23trtWEYoohpkyxNeVouW5LgyEHbQB_C33mmVn_KLMOvPu9A@mail.gmail.com>

Although "BAD READ -1" usually indicates a cert problem, in this case it's
due to using verto's speed test while using Chrome 98. Disabling the speed
test disabled the #SPE messages that verto sends to FS, and FS stopped
telling verto to relogin.

I have been looking for where FS supports the speed test but haven't found
it in its new WebSocket library
https://github.com/signalwire/libks/tree/master/src nor in
https://github.com/signalwire/freeswitch/tree/master/src/mod/endpoints/mod_verto
Anyone know where it is?

FWIW, my investigation is at https://github.com/signalwire/libks/issues/121

On Thu, Jan 13, 2022 at 11:05 AM David P <davidswalkabout at gmail.com> wrote:

> Our FS 1.10.7 logging level is set to max verbosity, but we don't see the
> logging done in
> https://github.com/signalwire/libks/blob/8af0d72d07a120140dc8b3d695089beec5950e81/src/kws.c
> even though we're using mod_verto.
> How can we make those log stmts appear?
>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/98066a59/attachment.html>

From gregor at infomedia.si  Fri Jan 14 07:47:58 2022
From: gregor at infomedia.si (Gregor Nanger)
Date: Fri, 14 Jan 2022 08:47:58 +0100
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
	"ORIGINATOR_CANCEL".
In-Reply-To: <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
Message-ID: <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>

Guys, does anyone know, if this fix will be included in new freeswitch
version?



On Wed, 27 Oct 2021 at 19:13, Jai Rangi <jprangi at gmail.com> wrote:

> Thank you Peter and Christian.
>
> On Fri, Oct 22, 2021 at 7:19 AM Peter Steinbach <lists at telefaks.de> wrote:
>
>> Just to mention: The patch was developed by Christian Berger from our
>> client Foncloud. Thank you Christian!
>>
>> Best regards
>> Peter
>>
>>
>> Am 21.10.21 um 17:20 schrieb Peter Steinbach:
>>
>> Hello,
>>
>>
>> this is a long lasting issue I firstly posted in 2017 and lastly saw in
>> 2019 in this thread, and I am happy to announce, that we have found a
>> solution for this.
>>
>> Here is the patch, which works pretty well in our environment
>>
>>
>> ===================================================================================================
>>
>> --- freeswitch_orig/src/switch_ivr_originate.c    2021-10-20
>> 12:51:04.863328041 +0200
>> +++ freeswitch/src/switch_ivr_originate.c    2021-10-20
>> 12:54:15.764616280 +0200
>> @@ -1789,7 +1789,13 @@
>>          if (cancel_cause && *cancel_cause > 0) {
>>              handles[i].cancel_cause = *cancel_cause;
>>          } else {
>> -            handles[i].cancel_cause = SWITCH_CAUSE_LOSE_RACE;
>> +            if ((hp!=NULL) && (hp->cause==SWITCH_CAUSE_SUCCESS)) { //Was
>> this call taken by another destination?
>> +                //Yes, the race was lost
>> +                handles[i].cancel_cause = SWITCH_CAUSE_LOSE_RACE;
>> +            } else {
>> +                //No, something else happened, probably Originator
>> Cancel
>> +                handles[i].cancel_cause = SWITCH_CAUSE_ORIGINATOR_CANCEL;
>> +            }
>>          }
>>      }
>>
>> ===================================================================================================
>>
>>
>> Can someone retest this and check this in?
>>
>> --
>> With kind regards
>> Peter Steinbach
>>
>> Telefaks Services GmbHmailto:lists <lists> (att) telefaks.de
>> Internet: www.telefaks.de
>>
>> Am 22.05.19 um 21:14 schrieb Jai Rangi:
>>
>> All,
>> Running into a small issue with group calling, when the original caller
>> hang up, phones dont show that call as missed call, cause of wrong reason
>> code from freeswitch.
>> Scenario:
>>
>>    - Caller -> FS (Groupcall) to 101 and 102
>>    - Phones ring
>>    - Caller hangup
>>    - Phones should see missed calls,
>>    - But free-switch send cancel with Reason: SIP;cause=200;text="Call
>>    completed elsewhere", where is should send Reason:
>>    SIP;cause=487;text="ORIGINATOR_CANCEL".
>>
>> Here is what my bridge data.
>>
>> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>> ]user/101 at 192.168.5.50:_:[ignore_early_media=true,leg_timeout=20 ]user/
>> 102 at 192.168.5.50)
>>
>> If I send
>> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>> ]user/101 at 192.168.5.50
>>
>> Everything works fine.
>> I see some old posts but no resolution.
>> Freeswitch version on Debian 8.9
>> FreeSWITCH (Version 1.6.16 git 3da6bd0 2017-04-07 16:49:13Z 64bit)
>>
>> Any idea or suggestion for workaround?
>>
>> Jai
>>
>>
>>
>>
>>
>>
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time https://signalwire.community
>>
>> Professional FreeSWITCH Servicessales at freeswitch.comhttps://freeswitch.com
>>
>> Official FreeSWITCH Siteshttps://freeswitch.com/osshttps://freeswitch.org/confluencehttps://cluecon.com
>>
>> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttps://freeswitch.com
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 
Gregor Nanger

*CTO*
t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
• Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
• www.infomedia.si
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/dc44040c/attachment-0001.html>

From dragos at freeswitch.org  Fri Jan 14 11:47:59 2022
From: dragos at freeswitch.org (Dragos Oancea)
Date: Fri, 14 Jan 2022 13:47:59 +0200
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
	"ORIGINATOR_CANCEL".
In-Reply-To: <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
 <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
Message-ID: <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>

Creator of the patch must create a PR in Github against FSs master branch
in order to be reviewed.

On Fri, Jan 14, 2022 at 9:48 AM Gregor Nanger <gregor at infomedia.si> wrote:

> Guys, does anyone know, if this fix will be included in new freeswitch
> version?
>
>
>
> On Wed, 27 Oct 2021 at 19:13, Jai Rangi <jprangi at gmail.com> wrote:
>
>> Thank you Peter and Christian.
>>
>> On Fri, Oct 22, 2021 at 7:19 AM Peter Steinbach <lists at telefaks.de>
>> wrote:
>>
>>> Just to mention: The patch was developed by Christian Berger from our
>>> client Foncloud. Thank you Christian!
>>>
>>> Best regards
>>> Peter
>>>
>>>
>>> Am 21.10.21 um 17:20 schrieb Peter Steinbach:
>>>
>>> Hello,
>>>
>>>
>>> this is a long lasting issue I firstly posted in 2017 and lastly saw in
>>> 2019 in this thread, and I am happy to announce, that we have found a
>>> solution for this.
>>>
>>> Here is the patch, which works pretty well in our environment
>>>
>>>
>>> ===================================================================================================
>>>
>>> --- freeswitch_orig/src/switch_ivr_originate.c    2021-10-20
>>> 12:51:04.863328041 +0200
>>> +++ freeswitch/src/switch_ivr_originate.c    2021-10-20
>>> 12:54:15.764616280 +0200
>>> @@ -1789,7 +1789,13 @@
>>>          if (cancel_cause && *cancel_cause > 0) {
>>>              handles[i].cancel_cause = *cancel_cause;
>>>          } else {
>>> -            handles[i].cancel_cause = SWITCH_CAUSE_LOSE_RACE;
>>> +            if ((hp!=NULL) && (hp->cause==SWITCH_CAUSE_SUCCESS)) {
>>> //Was this call taken by another destination?
>>> +                //Yes, the race was lost
>>> +                handles[i].cancel_cause = SWITCH_CAUSE_LOSE_RACE;
>>> +            } else {
>>> +                //No, something else happened, probably Originator
>>> Cancel
>>> +                handles[i].cancel_cause =
>>> SWITCH_CAUSE_ORIGINATOR_CANCEL;
>>> +            }
>>>          }
>>>      }
>>>
>>> ===================================================================================================
>>>
>>>
>>> Can someone retest this and check this in?
>>>
>>> --
>>> With kind regards
>>> Peter Steinbach
>>>
>>> Telefaks Services GmbHmailto:lists <lists> (att) telefaks.de
>>> Internet: www.telefaks.de
>>>
>>> Am 22.05.19 um 21:14 schrieb Jai Rangi:
>>>
>>> All,
>>> Running into a small issue with group calling, when the original caller
>>> hang up, phones dont show that call as missed call, cause of wrong reason
>>> code from freeswitch.
>>> Scenario:
>>>
>>>    - Caller -> FS (Groupcall) to 101 and 102
>>>    - Phones ring
>>>    - Caller hangup
>>>    - Phones should see missed calls,
>>>    - But free-switch send cancel with Reason: SIP;cause=200;text="Call
>>>    completed elsewhere", where is should send Reason:
>>>    SIP;cause=487;text="ORIGINATOR_CANCEL".
>>>
>>> Here is what my bridge data.
>>>
>>> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>> ]user/101 at 192.168.5.50:_:[ignore_early_media=true,leg_timeout=20 ]user/
>>> 102 at 192.168.5.50)
>>>
>>> If I send
>>> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>> ]user/101 at 192.168.5.50
>>>
>>> Everything works fine.
>>> I see some old posts but no resolution.
>>> Freeswitch version on Debian 8.9
>>> FreeSWITCH (Version 1.6.16 git 3da6bd0 2017-04-07 16:49:13Z 64bit)
>>>
>>> Any idea or suggestion for workaround?
>>>
>>> Jai
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> _________________________________________________________________________
>>>
>>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
>>> Build your next product on our scalable cloud platform.
>>>
>>> Join our online community to chat in real time https://signalwire.community
>>>
>>> Professional FreeSWITCH Servicessales at freeswitch.comhttps://freeswitch.com
>>>
>>> Official FreeSWITCH Siteshttps://freeswitch.com/osshttps://freeswitch.org/confluencehttps://cluecon.com
>>>
>>> FreeSWITCH-users mailing listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttps://freeswitch.com
>>>
>>> _________________________________________________________________________
>>>
>>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>>> services.
>>> Build your next product on our scalable cloud platform.
>>>
>>> Join our online community to chat in real time
>>> https://signalwire.community
>>>
>>> Professional FreeSWITCH Services
>>> sales at freeswitch.com
>>> https://freeswitch.com
>>>
>>> Official FreeSWITCH Sites
>>> https://freeswitch.com/oss
>>> https://freeswitch.org/confluence
>>> https://cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> https://freeswitch.com
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
>
>
> --
> Gregor Nanger
>
> *CTO*
> t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
> • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
> • www.infomedia.si
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/bc1a0bc9/attachment.html>

From christian.berger at foncloud.net  Fri Jan 14 12:09:09 2022
From: christian.berger at foncloud.net (Christian Berger)
Date: Fri, 14 Jan 2022 13:09:09 +0100
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
 "ORIGINATOR_CANCEL".
In-Reply-To: <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
 <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
 <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>
Message-ID: <763e7efb-81e0-edf3-3a36-d8acc8721af0@foncloud.net>

Unfortunately I do not have the privileges to create a branch on this 
project. This seems to be necessary to create a pull request.

Am 14.01.22 um 12:47 schrieb Dragos Oancea:
> Creator of the patch must create a PR in Github against FSs master 
> branch in order to be reviewed.
> 
> On Fri, Jan 14, 2022 at 9:48 AM Gregor Nanger <gregor at infomedia.si 
> <mailto:gregor at infomedia.si>> wrote:
> 
>     Guys, does anyone know, if this fix will be included in new
>     freeswitch version?
> 
> 
> 
>     On Wed, 27 Oct 2021 at 19:13, Jai Rangi <jprangi at gmail.com
>     <mailto:jprangi at gmail.com>> wrote:
> 
>         Thank you Peter and Christian.
> 
>         On Fri, Oct 22, 2021 at 7:19 AM Peter Steinbach
>         <lists at telefaks.de <mailto:lists at telefaks.de>> wrote:
> 
>             Just to mention: The patch was developed by Christian Berger
>             from our client Foncloud. Thank you Christian!
> 
>             Best regards
>             Peter
> 
> 
>             Am 21.10.21 um 17:20 schrieb Peter Steinbach:
>>
>>             Hello,
>>
>>
>>             this is a long lasting issue I firstly posted in 2017 and
>>             lastly saw in 2019 in this thread, and I am happy to
>>             announce, that we have found a solution for this.
>>
>>             Here is the patch, which works pretty well in our environment
>>
>>             ===================================================================================================
>>
>>             --- freeswitch_orig/src/switch_ivr_originate.c 2021-10-20
>>             12:51:04.863328041 +0200
>>             +++ freeswitch/src/switch_ivr_originate.c    2021-10-20
>>             12:54:15.764616280 +0200
>>             @@ -1789,7 +1789,13 @@
>>                      if (cancel_cause && *cancel_cause > 0) {
>>                          handles[i].cancel_cause = *cancel_cause;
>>                      } else {
>>             -            handles[i].cancel_cause = SWITCH_CAUSE_LOSE_RACE;
>>             +            if ((hp!=NULL) &&
>>             (hp->cause==SWITCH_CAUSE_SUCCESS)) { //Was this call taken
>>             by another destination?
>>             +                //Yes, the race was lost
>>             +                handles[i].cancel_cause =
>>             SWITCH_CAUSE_LOSE_RACE;
>>             +            } else {
>>             +                //No, something else happened, probably
>>             Originator Cancel
>>             +                handles[i].cancel_cause =
>>             SWITCH_CAUSE_ORIGINATOR_CANCEL;
>>             +            }
>>                      }
>>                  }
>>             ===================================================================================================
>>
>>
>>             Can someone retest this and check this in?
>>
>>
>>             -- 
>>             With kind regards
>>             Peter Steinbach
>>
>>             Telefaks Services GmbH
>>             mailto:lists  <mailto:lists>  (att)telefaks.de  <http://telefaks.de>
>>             Internet:www.telefaks.de  <http://www.telefaks.de>
>>
>>             Am 22.05.19 um 21:14 schrieb Jai Rangi:
>>>             All,
>>>             Running into a small issue with group calling, when the
>>>             original caller hang up, phones dont show that call as
>>>             missed call, cause of wrong reason code from freeswitch.
>>>             Scenario:
>>>
>>>               * Caller -> FS (Groupcall) to 101 and 102
>>>               * Phones ring
>>>               * Caller hangup
>>>               * Phones should see missed calls,
>>>               * But free-switch send cancel with Reason:
>>>                 SIP;cause=200;text="Call completed elsewhere", where
>>>                 is should send Reason:
>>>                 SIP;cause=487;text="ORIGINATOR_CANCEL".
>>>
>>>             Here is what my bridge data.
>>>
>>>             bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>>             /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>>             ]user/101 at 192.168.5.50:_:[ignore_early_media=true,leg_timeout=20
>>>             ]user/102 at 192.168.5.50 <mailto:102 at 192.168.5.50>)
>>>
>>>             If I send
>>>             bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>>             /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>>             ]user/101 at 192.168.5.50 <mailto:101 at 192.168.5.50>
>>>
>>>             Everything works fine.
>>>             I see some old posts but no resolution.
>>>             Freeswitch version on Debian 8.9
>>>             FreeSWITCH (Version 1.6.16 git 3da6bd0 2017-04-07
>>>             16:49:13Z 64bit)
>>>
>>>             Any idea or suggestion for workaround?
>>>
>>>             Jai
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>             _________________________________________________________________________
>>>
>>>             The FreeSWITCH project is sponsored by SignalWirehttps://signalwire.com  <https://signalwire.com>
>>>             Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
>>>             Build your next product on our scalable cloud platform.
>>>
>>>             Join our online community to chat in real timehttps://signalwire.community  <https://signalwire.community>
>>>
>>>             Professional FreeSWITCH Services
>>>             sales at freeswitch.com  <mailto:sales at freeswitch.com>
>>>             https://freeswitch.com  <https://freeswitch.com>
>>>
>>>             Official FreeSWITCH Sites
>>>             https://freeswitch.com/oss  <https://freeswitch.com/oss>
>>>             https://freeswitch.org/confluence  <https://freeswitch.org/confluence>
>>>             https://cluecon.com  <https://cluecon.com>
>>>
>>>             FreeSWITCH-users mailing list
>>>             FreeSWITCH-users at lists.freeswitch.org  <mailto:FreeSWITCH-users at lists.freeswitch.org>
>>>             http://lists.freeswitch.org/mailman/listinfo/freeswitch-users  <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>>>             UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users  <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>>>             https://freeswitch.com  <https://freeswitch.com>
>             _________________________________________________________________________
> 
>             The FreeSWITCH project is sponsored by SignalWire
>             https://signalwire.com <https://signalwire.com>
>             Enhance your FreeSWITCH install with disruptive priced SMS
>             and PSTN services.
>             Build your next product on our scalable cloud platform.
> 
>             Join our online community to chat in real time
>             https://signalwire.community <https://signalwire.community>
> 
>             Professional FreeSWITCH Services
>             sales at freeswitch.com <mailto:sales at freeswitch.com>
>             https://freeswitch.com <https://freeswitch.com>
> 
>             Official FreeSWITCH Sites
>             https://freeswitch.com/oss <https://freeswitch.com/oss>
>             https://freeswitch.org/confluence
>             <https://freeswitch.org/confluence>
>             https://cluecon.com <https://cluecon.com>
> 
>             FreeSWITCH-users mailing list
>             FreeSWITCH-users at lists.freeswitch.org
>             <mailto:FreeSWITCH-users at lists.freeswitch.org>
>             http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>             UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>             <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>             https://freeswitch.com <https://freeswitch.com>
> 
>         _________________________________________________________________________
> 
>         The FreeSWITCH project is sponsored by SignalWire
>         https://signalwire.com <https://signalwire.com>
>         Enhance your FreeSWITCH install with disruptive priced SMS and
>         PSTN services.
>         Build your next product on our scalable cloud platform.
> 
>         Join our online community to chat in real time
>         https://signalwire.community <https://signalwire.community>
> 
>         Professional FreeSWITCH Services
>         sales at freeswitch.com <mailto:sales at freeswitch.com>
>         https://freeswitch.com <https://freeswitch.com>
> 
>         Official FreeSWITCH Sites
>         https://freeswitch.com/oss <https://freeswitch.com/oss>
>         https://freeswitch.org/confluence
>         <https://freeswitch.org/confluence>
>         https://cluecon.com <https://cluecon.com>
> 
>         FreeSWITCH-users mailing list
>         FreeSWITCH-users at lists.freeswitch.org
>         <mailto:FreeSWITCH-users at lists.freeswitch.org>
>         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>         <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>         UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>         <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>         https://freeswitch.com <https://freeswitch.com>
> 
> 
> 
>     -- 
>     Gregor Nanger
>     	*CTO*
>     t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
>     • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
>     • www.infomedia.si <http://www.infomedia.si>
> 
>     _________________________________________________________________________
> 
>     The FreeSWITCH project is sponsored by SignalWire
>     https://signalwire.com <https://signalwire.com>
>     Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>     services.
>     Build your next product on our scalable cloud platform.
> 
>     Join our online community to chat in real time
>     https://signalwire.community <https://signalwire.community>
> 
>     Professional FreeSWITCH Services
>     sales at freeswitch.com <mailto:sales at freeswitch.com>
>     https://freeswitch.com <https://freeswitch.com>
> 
>     Official FreeSWITCH Sites
>     https://freeswitch.com/oss <https://freeswitch.com/oss>
>     https://freeswitch.org/confluence <https://freeswitch.org/confluence>
>     https://cluecon.com <https://cluecon.com>
> 
>     FreeSWITCH-users mailing list
>     FreeSWITCH-users at lists.freeswitch.org
>     <mailto:FreeSWITCH-users at lists.freeswitch.org>
>     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>     <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>     UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>     <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>     https://freeswitch.com <https://freeswitch.com>
> 
> 
> _________________________________________________________________________
> 
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
> Build your next product on our scalable cloud platform.
> 
> Join our online community to chat in real time https://signalwire.community
> 
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
> 
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
> 


Christian Berger


 

foncloud GmbH & Co KG
Hahlweg 2a
36093 Künzell

Tel: / 
Fax: +49 661 968990-99

 

Email: Christian.Berger at foncloud.net
 Web: www.foncloud.net





P.S.: Wussten Sie schon? 

Unter https://www.foncloud.net/wissen  finden Sie zahlreiche Informationen und hilfreiche Artikel rund um unsere Produkte und Services.

 


Registergericht: Amtsgericht Fulda, Persönlich haftende Gesellschafterin der foncloud GmbH&Co.KG: Global Brain Network GmbHGeschäftsführer der Global Brain Network GmbH: Peter Krug Sitz der Gesellschaft: Künzell.

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/3719a30d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0eb5f48c.e33a6fec.jpg
Type: image/jpeg
Size: 56822 bytes
Desc: not available
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/3719a30d/attachment-0001.jpg>

From gregor at infomedia.si  Fri Jan 14 12:19:40 2022
From: gregor at infomedia.si (Gregor Nanger)
Date: Fri, 14 Jan 2022 13:19:40 +0100
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
	"ORIGINATOR_CANCEL".
In-Reply-To: <763e7efb-81e0-edf3-3a36-d8acc8721af0@foncloud.net>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
 <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
 <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>
 <763e7efb-81e0-edf3-3a36-d8acc8721af0@foncloud.net>
Message-ID: <CAC7ttFE0m+v3v4MtdHFnd9XR0=F9vQ+q34DG49GVfzGPgubkEA@mail.gmail.com>

I think that for Pull Request you do not need any special permissions. Or I
could be wrong.

Can someone advise on this as this patch is really useful and it is a waste
to lose it.

BR, Gregor

On Fri, 14 Jan 2022 at 13:09, Christian Berger <
christian.berger at foncloud.net> wrote:

> Unfortunately I do not have the privileges to create a branch on this
> project. This seems to be necessary to create a pull request.
>
> Am 14.01.22 um 12:47 schrieb Dragos Oancea:
> > Creator of the patch must create a PR in Github against FSs master
> > branch in order to be reviewed.
> >
> > On Fri, Jan 14, 2022 at 9:48 AM Gregor Nanger <gregor at infomedia.si
> > <mailto:gregor at infomedia.si>> wrote:
> >
> >     Guys, does anyone know, if this fix will be included in new
> >     freeswitch version?
> >
> >
> >
> >     On Wed, 27 Oct 2021 at 19:13, Jai Rangi <jprangi at gmail.com
> >     <mailto:jprangi at gmail.com>> wrote:
> >
> >         Thank you Peter and Christian.
> >
> >         On Fri, Oct 22, 2021 at 7:19 AM Peter Steinbach
> >         <lists at telefaks.de <mailto:lists at telefaks.de>> wrote:
> >
> >             Just to mention: The patch was developed by Christian Berger
> >             from our client Foncloud. Thank you Christian!
> >
> >             Best regards
> >             Peter
> >
> >
> >             Am 21.10.21 um 17:20 schrieb Peter Steinbach:
> >>
> >>             Hello,
> >>
> >>
> >>             this is a long lasting issue I firstly posted in 2017 and
> >>             lastly saw in 2019 in this thread, and I am happy to
> >>             announce, that we have found a solution for this.
> >>
> >>             Here is the patch, which works pretty well in our
> environment
> >>
> >>
> ===================================================================================================
>
> >>
> >>             --- freeswitch_orig/src/switch_ivr_originate.c 2021-10-20
> >>             12:51:04.863328041 +0200
> >>             +++ freeswitch/src/switch_ivr_originate.c    2021-10-20
> >>             12:54:15.764616280 +0200
> >>             @@ -1789,7 +1789,13 @@
> >>                      if (cancel_cause && *cancel_cause > 0) {
> >>                          handles[i].cancel_cause = *cancel_cause;
> >>                      } else {
> >>             -            handles[i].cancel_cause =
> SWITCH_CAUSE_LOSE_RACE;
> >>             +            if ((hp!=NULL) &&
> >>             (hp->cause==SWITCH_CAUSE_SUCCESS)) { //Was this call taken
> >>             by another destination?
> >>             +                //Yes, the race was lost
> >>             +                handles[i].cancel_cause =
> >>             SWITCH_CAUSE_LOSE_RACE;
> >>             +            } else {
> >>             +                //No, something else happened, probably
> >>             Originator Cancel
> >>             +                handles[i].cancel_cause =
> >>             SWITCH_CAUSE_ORIGINATOR_CANCEL;
> >>             +            }
> >>                      }
> >>                  }
> >>
> ===================================================================================================
>
> >>
> >>
> >>             Can someone retest this and check this in?
> >>
> >>
> >>             --
> >>             With kind regards
> >>             Peter Steinbach
> >>
> >>             Telefaks Services GmbH
> >>             mailto:lists  <mailto:lists>  (att)telefaks.de  <
> http://telefaks.de>
> >>             Internet:www.telefaks.de  <http://www.telefaks.de>
> >>
> >>             Am 22.05.19 um 21:14 schrieb Jai Rangi:
> >>>             All,
> >>>             Running into a small issue with group calling, when the
> >>>             original caller hang up, phones dont show that call as
> >>>             missed call, cause of wrong reason code from freeswitch.
> >>>             Scenario:
> >>>
> >>>               * Caller -> FS (Groupcall) to 101 and 102
> >>>               * Phones ring
> >>>               * Caller hangup
> >>>               * Phones should see missed calls,
> >>>               * But free-switch send cancel with Reason:
> >>>                 SIP;cause=200;text="Call completed elsewhere", where
> >>>                 is should send Reason:
> >>>                 SIP;cause=487;text="ORIGINATOR_CANCEL".
> >>>
> >>>             Here is what my bridge data.
> >>>
> >>>
>
> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>
> >>>
> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>
> >>>             ]user/101 at 192.168.5.50:_:[ignore_early_media=true,leg_timeout=20
>
> >>>             ]user/102 at 192.168.5.50 <mailto:102 at 192.168.5.50>)
> >>>
> >>>             If I send
> >>>
> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>
> >>>
> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>
> >>>             ]user/101 at 192.168.5.50 <mailto:101 at 192.168.5.50>
> >>>
> >>>             Everything works fine.
> >>>             I see some old posts but no resolution.
> >>>             Freeswitch version on Debian 8.9
> >>>             FreeSWITCH (Version 1.6.16 git 3da6bd0 2017-04-07
> >>>             16:49:13Z 64bit)
> >>>
> >>>             Any idea or suggestion for workaround?
> >>>
> >>>             Jai
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> _________________________________________________________________________
> >>>
> >>>             The FreeSWITCH project is sponsored by SignalWire
> https://signalwire.com  <https://signalwire.com>
> >>>             Enhance your FreeSWITCH install with disruptive priced SMS
> and PSTN services.
> >>>             Build your next product on our scalable cloud platform.
> >>>
> >>>             Join our online community to chat in real time
> https://signalwire.community  <https://signalwire.community>
> >>>
> >>>             Professional FreeSWITCH Services
> >>>             sales at freeswitch.com  <mailto:sales at freeswitch.com>
> >>>             https://freeswitch.com  <https://freeswitch.com>
> >>>
> >>>             Official FreeSWITCH Sites
> >>>             https://freeswitch.com/oss  <https://freeswitch.com/oss>
> >>>             https://freeswitch.org/confluence  <
> https://freeswitch.org/confluence>
> >>>             https://cluecon.com  <https://cluecon.com>
> >>>
> >>>             FreeSWITCH-users mailing list
> >>>             FreeSWITCH-users at lists.freeswitch.org  <mailto:
> FreeSWITCH-users at lists.freeswitch.org>
> >>>
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users  <
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >>>             UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users  <
> http://lists.freeswitch.org/mailman/options/freeswitch-users>
> >>>             https://freeswitch.com  <https://freeswitch.com>
> >
> _________________________________________________________________________
> >
> >             The FreeSWITCH project is sponsored by SignalWire
> >             https://signalwire.com <https://signalwire.com>
> >             Enhance your FreeSWITCH install with disruptive priced SMS
> >             and PSTN services.
> >             Build your next product on our scalable cloud platform.
> >
> >             Join our online community to chat in real time
> >             https://signalwire.community <https://signalwire.community>
> >
> >             Professional FreeSWITCH Services
> >             sales at freeswitch.com <mailto:sales at freeswitch.com>
> >             https://freeswitch.com <https://freeswitch.com>
> >
> >             Official FreeSWITCH Sites
> >             https://freeswitch.com/oss <https://freeswitch.com/oss>
> >             https://freeswitch.org/confluence
> >             <https://freeswitch.org/confluence>
> >             https://cluecon.com <https://cluecon.com>
> >
> >             FreeSWITCH-users mailing list
> >             FreeSWITCH-users at lists.freeswitch.org
> >             <mailto:FreeSWITCH-users at lists.freeswitch.org>
> >
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >             UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >             <http://lists.freeswitch.org/mailman/options/frees
> witch-users>
> >             https://freeswitch.com <https://freeswitch.com>
> >
> >
> _________________________________________________________________________
> >
> >         The FreeSWITCH project is sponsored by SignalWire
> >         https://signalwire.com <https://signalwire.com>
> >         Enhance your FreeSWITCH install with disruptive priced SMS and
> >         PSTN services.
> >         Build your next product on our scalable cloud platform.
> >
> >         Join our online community to chat in real time
> >         https://signalwire.community <https://signalwire.community>
> >
> >         Professional FreeSWITCH Services
> >         sales at freeswitch.com <mailto:sales at freeswitch.com>
> >         https://freeswitch.com <https://freeswitch.com>
> >
> >         Official FreeSWITCH Sites
> >         https://freeswitch.com/oss <https://freeswitch.com/oss>
> >         https://freeswitch.org/confluence
> >         <https://freeswitch.org/confluence>
> >         https://cluecon.com <https://cluecon.com>
> >
> >         FreeSWITCH-users mailing list
> >         FreeSWITCH-users at lists.freeswitch.org
> >         <mailto:FreeSWITCH-users at lists.freeswitch.org>
> >         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >         <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >         UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >         <http://lists.freeswitch.org/mailman/options/freeswitch-users>
> >         https://freeswitch.com <https://freeswitch.com>
> >
> >
> >
> >     --
> >     Gregor Nanger
> >       *CTO*
> >     t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
> >     • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
> >     • www.infomedia.si <http://www.infomedia.si>
> >
> >
> _________________________________________________________________________
> >
> >     The FreeSWITCH project is sponsored by SignalWire
> >     https://signalwire.com <https://signalwire.com>
> >     Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> >     services.
> >     Build your next product on our scalable cloud platform.
> >
> >     Join our online community to chat in real time
> >     https://signalwire.community <https://signalwire.community>
> >
> >     Professional FreeSWITCH Services
> >     sales at freeswitch.com <mailto:sales at freeswitch.com>
> >     https://freeswitch.com <https://freeswitch.com>
> >
> >     Official FreeSWITCH Sites
> >     https://freeswitch.com/oss <https://freeswitch.com/oss>
> >     https://freeswitch.org/confluence <https://freeswitch.org/confluence>
>
> >     https://cluecon.com <https://cluecon.com>
> >
> >     FreeSWITCH-users mailing list
> >     FreeSWITCH-users at lists.freeswitch.org
> >     <mailto:FreeSWITCH-users at lists.freeswitch.org>
> >     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >     <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >     UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >     <http://lists.freeswitch.org/mailman/options/freeswitch-users>
> >     https://freeswitch.com <https://freeswitch.com>
> >
> >
> >
> _________________________________________________________________________
> >
> > The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> > Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> > Build your next product on our scalable cloud platform.
> >
> > Join our online community to chat in real time
> https://signalwire.community
> >
> > Professional FreeSWITCH Services
> > sales at freeswitch.com
> > https://freeswitch.com
> >
> > Official FreeSWITCH Sites
> > https://freeswitch.com/oss
> > https://freeswitch.org/confluence
> > https://cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > https://freeswitch.com
> >
>
>
> Christian Berger
>
>
>
>
> foncloud GmbH & Co KG
> Hahlweg 2a
> 36093 Künzell
>
> Tel: /
> Fax: +49 661 968990-99
>
> Email: Christian.Berger at foncloud.net
> Web: www.foncloud.net
>
>
> *P.S.: Wussten Sie schon? *
>
> *Unter https://www.foncloud.net/wissen <https://www.foncloud.net/wissen>
> finden Sie zahlreiche Informationen und hilfreiche Artikel rund um unsere
> Produkte und Services.*
>
>
>
> Registergericht: Amtsgericht Fulda, Persönlich haftende Gesellschafterin
> der foncloud GmbH&Co.KG: Global Brain Network GmbH
> Geschäftsführer der Global Brain Network GmbH: Peter Krug Sitz der
> Gesellschaft: Künzell.
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
> irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
> vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
> Weitergabe dieser Mail ist nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information. If you
> are not the intended recipient (or have received this e-mail in error)
> please notify the sender immediately and destroy this e-mail. Any
> unauthorised copying, disclosure or distribution of the material in this
> e-mail is strictly forbidden.
>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/fb9d8f66/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0eb5f48c.e33a6fec.jpg
Type: image/jpeg
Size: 56822 bytes
Desc: not available
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/fb9d8f66/attachment-0001.jpg>

From dragos at freeswitch.org  Fri Jan 14 13:04:21 2022
From: dragos at freeswitch.org (Dragos Oancea)
Date: Fri, 14 Jan 2022 15:04:21 +0200
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
	"ORIGINATOR_CANCEL".
In-Reply-To: <CAC7ttFE0m+v3v4MtdHFnd9XR0=F9vQ+q34DG49GVfzGPgubkEA@mail.gmail.com>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
 <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
 <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>
 <763e7efb-81e0-edf3-3a36-d8acc8721af0@foncloud.net>
 <CAC7ttFE0m+v3v4MtdHFnd9XR0=F9vQ+q34DG49GVfzGPgubkEA@mail.gmail.com>
Message-ID: <CAGvJV4pgJcR9x1uMvF5ecewTkZSjoqSfLbq3OBO_xKy-qsmvDw@mail.gmail.com>

https://freeswitch.org/confluence/display/FREESWITCH/Pull+Requests

It's necessary to create a fork.



On Fri, Jan 14, 2022 at 2:20 PM Gregor Nanger <gregor at infomedia.si> wrote:

> I think that for Pull Request you do not need any special permissions. Or
> I could be wrong.
>
> Can someone advise on this as this patch is really useful and it is a
> waste to lose it.
>
> BR, Gregor
>
> On Fri, 14 Jan 2022 at 13:09, Christian Berger <
> christian.berger at foncloud.net> wrote:
>
>> Unfortunately I do not have the privileges to create a branch on this
>> project. This seems to be necessary to create a pull request.
>>
>> Am 14.01.22 um 12:47 schrieb Dragos Oancea:
>> > Creator of the patch must create a PR in Github against FSs master
>> > branch in order to be reviewed.
>> >
>> > On Fri, Jan 14, 2022 at 9:48 AM Gregor Nanger <gregor at infomedia.si
>> > <mailto:gregor at infomedia.si>> wrote:
>> >
>> >     Guys, does anyone know, if this fix will be included in new
>> >     freeswitch version?
>> >
>> >
>> >
>> >     On Wed, 27 Oct 2021 at 19:13, Jai Rangi <jprangi at gmail.com
>> >     <mailto:jprangi at gmail.com>> wrote:
>> >
>> >         Thank you Peter and Christian.
>> >
>> >         On Fri, Oct 22, 2021 at 7:19 AM Peter Steinbach
>> >         <lists at telefaks.de <mailto:lists at telefaks.de>> wrote:
>> >
>> >             Just to mention: The patch was developed by Christian
>> Berger
>> >             from our client Foncloud. Thank you Christian!
>> >
>> >             Best regards
>> >             Peter
>> >
>> >
>> >             Am 21.10.21 um 17:20 schrieb Peter Steinbach:
>> >>
>> >>             Hello,
>> >>
>> >>
>> >>             this is a long lasting issue I firstly posted in 2017 and
>> >>             lastly saw in 2019 in this thread, and I am happy to
>> >>             announce, that we have found a solution for this.
>> >>
>> >>             Here is the patch, which works pretty well in our
>> environment
>> >>
>> >>
>> ===================================================================================================
>>
>> >>
>> >>             --- freeswitch_orig/src/switch_ivr_originate.c 2021-10-20
>> >>             12:51:04.863328041 +0200
>> >>             +++ freeswitch/src/switch_ivr_originate.c    2021-10-20
>> >>             12:54:15.764616280 +0200
>> >>             @@ -1789,7 +1789,13 @@
>> >>                      if (cancel_cause && *cancel_cause > 0) {
>> >>                          handles[i].cancel_cause = *cancel_cause;
>> >>                      } else {
>> >>             -            handles[i].cancel_cause =
>> SWITCH_CAUSE_LOSE_RACE;
>> >>             +            if ((hp!=NULL) &&
>> >>             (hp->cause==SWITCH_CAUSE_SUCCESS)) { //Was this call taken
>> >>             by another destination?
>> >>             +                //Yes, the race was lost
>> >>             +                handles[i].cancel_cause =
>> >>             SWITCH_CAUSE_LOSE_RACE;
>> >>             +            } else {
>> >>             +                //No, something else happened, probably
>> >>             Originator Cancel
>> >>             +                handles[i].cancel_cause =
>> >>             SWITCH_CAUSE_ORIGINATOR_CANCEL;
>> >>             +            }
>> >>                      }
>> >>                  }
>> >>
>> ===================================================================================================
>>
>> >>
>> >>
>> >>             Can someone retest this and check this in?
>> >>
>> >>
>> >>             --
>> >>             With kind regards
>> >>             Peter Steinbach
>> >>
>> >>             Telefaks Services GmbH
>> >>             mailto:lists  <mailto:lists>  (att)telefaks.de  <
>> http://telefaks.de>
>> >>             Internet:www.telefaks.de  <http://www.telefaks.de>
>> >>
>> >>             Am 22.05.19 um 21:14 schrieb Jai Rangi:
>> >>>             All,
>> >>>             Running into a small issue with group calling, when the
>> >>>             original caller hang up, phones dont show that call as
>> >>>             missed call, cause of wrong reason code from freeswitch.
>> >>>             Scenario:
>> >>>
>> >>>               * Caller -> FS (Groupcall) to 101 and 102
>> >>>               * Phones ring
>> >>>               * Caller hangup
>> >>>               * Phones should see missed calls,
>> >>>               * But free-switch send cancel with Reason:
>> >>>                 SIP;cause=200;text="Call completed elsewhere", where
>> >>>                 is should send Reason:
>> >>>                 SIP;cause=487;text="ORIGINATOR_CANCEL".
>> >>>
>> >>>             Here is what my bridge data.
>> >>>
>> >>>
>>
>> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>
>> >>>
>> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>
>> >>>             ]user/101 at 192.168.5.50:_:[ignore_early_media=true,leg_timeout=20
>>
>> >>>             ]user/102 at 192.168.5.50 <mailto:102 at 192.168.5.50>)
>> >>>
>> >>>             If I send
>> >>>
>> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>
>> >>>
>> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>
>> >>>             ]user/101 at 192.168.5.50 <mailto:101 at 192.168.5.50>
>> >>>
>> >>>             Everything works fine.
>> >>>             I see some old posts but no resolution.
>> >>>             Freeswitch version on Debian 8.9
>> >>>             FreeSWITCH (Version 1.6.16 git 3da6bd0 2017-04-07
>> >>>             16:49:13Z 64bit)
>> >>>
>> >>>             Any idea or suggestion for workaround?
>> >>>
>> >>>             Jai
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> _________________________________________________________________________
>> >>>
>> >>>             The FreeSWITCH project is sponsored by SignalWire
>> https://signalwire.com  <https://signalwire.com>
>> >>>             Enhance your FreeSWITCH install with disruptive priced
>> SMS and PSTN services.
>> >>>             Build your next product on our scalable cloud platform.
>> >>>
>> >>>             Join our online community to chat in real time
>> https://signalwire.community  <https://signalwire.community>
>> >>>
>> >>>             Professional FreeSWITCH Services
>> >>>             sales at freeswitch.com  <mailto:sales at freeswitch.com>
>> >>>             https://freeswitch.com  <https://freeswitch.com>
>> >>>
>> >>>             Official FreeSWITCH Sites
>> >>>             https://freeswitch.com/oss  <https://freeswitch.com/oss>
>> >>>             https://freeswitch.org/confluence  <
>> https://freeswitch.org/confluence>
>> >>>             https://cluecon.com  <https://cluecon.com>
>> >>>
>> >>>             FreeSWITCH-users mailing list
>> >>>             FreeSWITCH-users at lists.freeswitch.org  <mailto:
>> FreeSWITCH-users at lists.freeswitch.org>
>> >>>
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users  <
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>> >>>             UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users  <
>> http://lists.freeswitch.org/mailman/options/freeswitch-users>
>> >>>             https://freeswitch.com  <https://freeswitch.com>
>> >
>> _________________________________________________________________________
>> >
>> >             The FreeSWITCH project is sponsored by SignalWire
>> >             https://signalwire.com <https://signalwire.com>
>> >             Enhance your FreeSWITCH install with disruptive priced SMS
>> >             and PSTN services.
>> >             Build your next product on our scalable cloud platform.
>> >
>> >             Join our online community to chat in real time
>> >             https://signalwire.community <https://signalwire.community>
>>
>> >
>> >             Professional FreeSWITCH Services
>> >             sales at freeswitch.com <mailto:sales at freeswitch.com>
>> >             https://freeswitch.com <https://freeswitch.com>
>> >
>> >             Official FreeSWITCH Sites
>> >             https://freeswitch.com/oss <https://freeswitch.com/oss>
>> >             https://freeswitch.org/confluence
>> >             <https://freeswitch.org/confluence>
>> >             https://cluecon.com <https://cluecon.com>
>> >
>> >             FreeSWITCH-users mailing list
>> >             FreeSWITCH-users at lists.freeswitch.org
>> >             <mailto:FreeSWITCH-users at lists.freeswitch.org>
>> >
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>> >             UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >             <http://lists.freeswitch.org/mailman/options/frees
>> witch-users>
>> >             https://freeswitch.com <https://freeswitch.com>
>> >
>> >
>> _________________________________________________________________________
>> >
>> >         The FreeSWITCH project is sponsored by SignalWire
>> >         https://signalwire.com <https://signalwire.com>
>> >         Enhance your FreeSWITCH install with disruptive priced SMS and
>> >         PSTN services.
>> >         Build your next product on our scalable cloud platform.
>> >
>> >         Join our online community to chat in real time
>> >         https://signalwire.community <https://signalwire.community>
>> >
>> >         Professional FreeSWITCH Services
>> >         sales at freeswitch.com <mailto:sales at freeswitch.com>
>> >         https://freeswitch.com <https://freeswitch.com>
>> >
>> >         Official FreeSWITCH Sites
>> >         https://freeswitch.com/oss <https://freeswitch.com/oss>
>> >         https://freeswitch.org/confluence
>> >         <https://freeswitch.org/confluence>
>> >         https://cluecon.com <https://cluecon.com>
>> >
>> >         FreeSWITCH-users mailing list
>> >         FreeSWITCH-users at lists.freeswitch.org
>> >         <mailto:FreeSWITCH-users at lists.freeswitch.org>
>> >         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >         <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>>
>> >         UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >         <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>> >         https://freeswitch.com <https://freeswitch.com>
>> >
>> >
>> >
>> >     --
>> >     Gregor Nanger
>> >       *CTO*
>> >     t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
>> >     • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
>> >     • www.infomedia.si <http://www.infomedia.si>
>> >
>> >
>> _________________________________________________________________________
>> >
>> >     The FreeSWITCH project is sponsored by SignalWire
>> >     https://signalwire.com <https://signalwire.com>
>> >     Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> >     services.
>> >     Build your next product on our scalable cloud platform.
>> >
>> >     Join our online community to chat in real time
>> >     https://signalwire.community <https://signalwire.community>
>> >
>> >     Professional FreeSWITCH Services
>> >     sales at freeswitch.com <mailto:sales at freeswitch.com>
>> >     https://freeswitch.com <https://freeswitch.com>
>> >
>> >     Official FreeSWITCH Sites
>> >     https://freeswitch.com/oss <https://freeswitch.com/oss>
>> >     https://freeswitch.org/confluence <
>> https://freeswitch.org/confluence>
>> >     https://cluecon.com <https://cluecon.com>
>> >
>> >     FreeSWITCH-users mailing list
>> >     FreeSWITCH-users at lists.freeswitch.org
>> >     <mailto:FreeSWITCH-users at lists.freeswitch.org>
>> >     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >     <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>> >     UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >     <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>> >     https://freeswitch.com <https://freeswitch.com>
>> >
>> >
>> >
>> _________________________________________________________________________
>> >
>> > The FreeSWITCH project is sponsored by SignalWire
>> https://signalwire.com
>> > Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> > Build your next product on our scalable cloud platform.
>> >
>> > Join our online community to chat in real time
>> https://signalwire.community
>> >
>> > Professional FreeSWITCH Services
>> > sales at freeswitch.com
>> > https://freeswitch.com
>> >
>> > Official FreeSWITCH Sites
>> > https://freeswitch.com/oss
>> > https://freeswitch.org/confluence
>> > https://cluecon.com
>> >
>> > FreeSWITCH-users mailing list
>> > FreeSWITCH-users at lists.freeswitch.org
>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> > UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> > https://freeswitch.com
>> >
>>
>>
>> Christian Berger
>>
>>
>>
>>
>> foncloud GmbH & Co KG
>> Hahlweg 2a
>> 36093 Künzell
>>
>> Tel: /
>> Fax: +49 661 968990-99
>>
>> Email: Christian.Berger at foncloud.net
>> Web: www.foncloud.net
>>
>>
>> *P.S.: Wussten Sie schon? *
>>
>> *Unter https://www.foncloud.net/wissen <https://www.foncloud.net/wissen>
>> finden Sie zahlreiche Informationen und hilfreiche Artikel rund um unsere
>> Produkte und Services.*
>>
>>
>>
>> Registergericht: Amtsgericht Fulda, Persönlich haftende Gesellschafterin
>> der foncloud GmbH&Co.KG: Global Brain Network GmbH
>> Geschäftsführer der Global Brain Network GmbH: Peter Krug Sitz der
>> Gesellschaft: Künzell.
>>
>> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
>> Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
>> irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
>> vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
>> Weitergabe dieser Mail ist nicht gestattet.
>>
>> This e-mail may contain confidential and/or privileged information. If
>> you are not the intended recipient (or have received this e-mail in error)
>> please notify the sender immediately and destroy this e-mail. Any
>> unauthorised copying, disclosure or distribution of the material in this
>> e-mail is strictly forbidden.
>>
>>
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/11119638/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0eb5f48c.e33a6fec.jpg
Type: image/jpeg
Size: 56822 bytes
Desc: not available
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/11119638/attachment-0001.jpg>

From Zvonimir.Buzanic at asseco-see.hr  Fri Jan 14 15:14:50 2022
From: Zvonimir.Buzanic at asseco-see.hr (=?utf-8?B?WnZvbmltaXIgQnXFvmFuacSH?=)
Date: Fri, 14 Jan 2022 15:14:50 +0000
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
 "ORIGINATOR_CANCEL".
In-Reply-To: <CAGvJV4pgJcR9x1uMvF5ecewTkZSjoqSfLbq3OBO_xKy-qsmvDw@mail.gmail.com>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
 <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
 <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>
 <763e7efb-81e0-edf3-3a36-d8acc8721af0@foncloud.net>
 <CAC7ttFE0m+v3v4MtdHFnd9XR0=F9vQ+q34DG49GVfzGPgubkEA@mail.gmail.com>
 <CAGvJV4pgJcR9x1uMvF5ecewTkZSjoqSfLbq3OBO_xKy-qsmvDw@mail.gmail.com>
Message-ID: <27ae2214726a44b4b3787f5599f26a19@asseco-see.hr>

Hi, I've created pull request:

https://github.com/signalwire/freeswitch/pull/1520

BR, Zvonimir

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of Dragos Oancea
Sent: 14. siječnja 2022. 14:04
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] Issue with Enterprise originate and 487 "ORIGINATOR_CANCEL".

https://freeswitch.org/confluence/display/FREESWITCH/Pull+Requests

It's necessary to create a fork.



On Fri, Jan 14, 2022 at 2:20 PM Gregor Nanger <gregor at infomedia.si<mailto:gregor at infomedia.si>> wrote:
I think that for Pull Request you do not need any special permissions. Or I could be wrong.

Can someone advise on this as this patch is really useful and it is a waste to lose it.

BR, Gregor

On Fri, 14 Jan 2022 at 13:09, Christian Berger <christian.berger at foncloud.net<mailto:christian.berger at foncloud.net>> wrote:
Unfortunately I do not have the privileges to create a branch on this
project. This seems to be necessary to create a pull request.

Am 14.01.22 um 12:47 schrieb Dragos Oancea:
> Creator of the patch must create a PR in Github against FSs master
> branch in order to be reviewed.
>
> On Fri, Jan 14, 2022 at 9:48 AM Gregor Nanger <gregor at infomedia.si<mailto:gregor at infomedia.si>
> <mailto:gregor at infomedia.si<mailto:gregor at infomedia.si>>> wrote:
>
>     Guys, does anyone know, if this fix will be included in new
>     freeswitch version?
>
>
>
>     On Wed, 27 Oct 2021 at 19:13, Jai Rangi <jprangi at gmail.com<mailto:jprangi at gmail.com>
>     <mailto:jprangi at gmail.com<mailto:jprangi at gmail.com>>> wrote:
>
>         Thank you Peter and Christian.
>
>         On Fri, Oct 22, 2021 at 7:19 AM Peter Steinbach
>         <lists at telefaks.de<mailto:lists at telefaks.de> <mailto:lists at telefaks.de<mailto:lists at telefaks.de>>> wrote:
>
>             Just to mention: The patch was developed by Christian Berger
>             from our client Foncloud. Thank you Christian!
>
>             Best regards
>             Peter
>
>
>             Am 21.10.21 um 17:20 schrieb Peter Steinbach:
>>
>>             Hello,
>>
>>
>>             this is a long lasting issue I firstly posted in 2017 and
>>             lastly saw in 2019 in this thread, and I am happy to
>>             announce, that we have found a solution for this.
>>
>>             Here is the patch, which works pretty well in our environment
>>
>>             ===================================================================================================
>>
>>             --- freeswitch_orig/src/switch_ivr_originate.c 2021-10-20
>>             12:51:04.863328041 +0200
>>             +++ freeswitch/src/switch_ivr_originate.c    2021-10-20
>>             12:54:15.764616280 +0200
>>             @@ -1789,7 +1789,13 @@
>>                      if (cancel_cause && *cancel_cause > 0) {
>>                          handles[i].cancel_cause = *cancel_cause;
>>                      } else {
>>             -            handles[i].cancel_cause = SWITCH_CAUSE_LOSE_RACE;
>>             +            if ((hp!=NULL) &&
>>             (hp->cause==SWITCH_CAUSE_SUCCESS)) { //Was this call taken
>>             by another destination?
>>             +                //Yes, the race was lost
>>             +                handles[i].cancel_cause =
>>             SWITCH_CAUSE_LOSE_RACE;
>>             +            } else {
>>             +                //No, something else happened, probably
>>             Originator Cancel
>>             +                handles[i].cancel_cause =
>>             SWITCH_CAUSE_ORIGINATOR_CANCEL;
>>             +            }
>>                      }
>>                  }
>>             ===================================================================================================
>>
>>
>>             Can someone retest this and check this in?
>>
>>
>>             --
>>             With kind regards
>>             Peter Steinbach
>>
>>             Telefaks Services GmbH
>>             mailto:lists<mailto:lists>  <mailto:lists<mailto:lists>>  (att)telefaks.de<http://telefaks.de>  <http://telefaks.de>
>>             Internet:www.telefaks.de<http://www.telefaks.de>  <http://www.telefaks.de>
>>
>>             Am 22.05.19 um 21:14 schrieb Jai Rangi:
>>>             All,
>>>             Running into a small issue with group calling, when the
>>>             original caller hang up, phones dont show that call as
>>>             missed call, cause of wrong reason code from freeswitch.
>>>             Scenario:
>>>
>>>               * Caller -> FS (Groupcall) to 101 and 102
>>>               * Phones ring
>>>               * Caller hangup
>>>               * Phones should see missed calls,
>>>               * But free-switch send cancel with Reason:
>>>                 SIP;cause=200;text="Call completed elsewhere", where
>>>                 is should send Reason:
>>>                 SIP;cause=487;text="ORIGINATOR_CANCEL".
>>>
>>>             Here is what my bridge data.
>>>
>>>
   bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>>             /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>>             ]user/101 at 192.168.5.50<mailto:101 at 192.168.5.50>:_:[ignore_early_media=true,leg_timeout=20
>>>             ]user/102 at 192.168.5.50<mailto:102 at 192.168.5.50> <mailto:102 at 192.168.5.50<mailto:102 at 192.168.5.50>>)
>>>
>>>             If I send
>>>             bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>>>             /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>>>             ]user/101 at 192.168.5.50<mailto:101 at 192.168.5.50> <mailto:101 at 192.168.5.50<mailto:101 at 192.168.5.50>>
>>>
>>>             Everything works fine.
>>>             I see some old posts but no resolution.
>>>             Freeswitch version on Debian 8.9
>>>             FreeSWITCH (Version 1.6.16 git 3da6bd0 2017-04-07
>>>             16:49:13Z 64bit)
>>>
>>>             Any idea or suggestion for workaround?
>>>
>>>             Jai
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>             _________________________________________________________________________
>>>
>>>             The FreeSWITCH project is sponsored by SignalWirehttps://signalwire.com  <https://signalwire.com>
>>>             Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
>>>             Build your next product on our scalable cloud platform.
>>>
>>>             Join our online community to chat in real timehttps://signalwire.community  <https://signalwire.community>
>>>
>>>             Professional FreeSWITCH Services
>>>             sales at freeswitch.com<mailto:sales at freeswitch.com>  <mailto:sales at freeswitch.com<mailto:sales at freeswitch.com>>
>>>             https://freeswitch.com  <https://freeswitch.com>
>>>
>>>             Official FreeSWITCH Sites
>>>             https://freeswitch.com/oss  <https://freeswitch.com/oss>
>>>             https://freeswitch.org/confluence  <https://freeswitch.org/confluence>
>>>             https://cluecon.com  <https://cluecon.com>
>>>
>>>             FreeSWITCH-users mailing list
>>>             FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>  <mailto:FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>>
>>>             http://lists.freeswitch.org/mailman/listinfo/freeswitch-users  <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>>>             UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users  <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>>>             https://freeswitch.com  <https://freeswitch.com>
>             _________________________________________________________________________
>
>             The FreeSWITCH project is sponsored by SignalWire
>             https://signalwire.com <https://signalwire.com>
>             Enhance your FreeSWITCH install with disruptive priced SMS
>             and PSTN services.
>             Build your next product on our scalable cloud platform.
>
>             Join our online community to chat in real time
>             https://signalwire.community <https://signalwire.community>
>
>             Professional FreeSWITCH Services
>             sales at freeswitch.com<mailto:sales at freeswitch.com> <mailto:sales at freeswitch.com<mailto:sales at freeswitch.com>>
>             https://freeswitch.com <https://freeswitch.com>
>
>             Official FreeSWITCH Sites
>             https://freeswitch.com/oss <https://freeswitch.com/oss>
>             https://freeswitch.org/confluence
>             <https://freeswitch.org/confluence>
>             https://cluecon.com <https://cluecon.com>
>
>             FreeSWITCH-users mailing list
>             FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
>             <mailto:FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>>
>             http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>             UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>             <http://lists.freeswitch.org/mailman/options/frees
witch-users>
>             https://freeswitch.com <https://freeswitch.com>
>
>         _________________________________________________________________________
>
>         The FreeSWITCH project is sponsored by SignalWire
>         https://signalwire.com <https://signalwire.com>
>         Enhance your FreeSWITCH install with disruptive priced SMS and
>         PSTN services.
>         Build your next product on our scalable cloud platform.
>
>         Join our online community to chat in real time
>         https://signalwire.community <https://signalwire.community>
>
>         Professional FreeSWITCH Services
>         sales at freeswitch.com<mailto:sales at freeswitch.com> <mailto:sales at freeswitch.com<mailto:sales at freeswitch.com>>
>         https://freeswitch.com <https://freeswitch.com>
>
>         Official FreeSWITCH Sites
>         https://freeswitch.com/oss <https://freeswitch.com/oss>
>         https://freeswitch.org/confluence
>         <https://freeswitch.org/confluence>
>         https://cluecon.com <https://cluecon.com>
>
>         FreeSWITCH-users mailing list
>         FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
>         <mailto:FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>>
>         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>         <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>         UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>         <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>         https://freeswitch.com <https://freeswitch.com>
>
>
>
>     --
>     Gregor Nanger
>       *CTO*
>     t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
>     • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
>     • www.infomedia.si<http://www.infomedia.si> <http://www.infomedia.si>
>
>     _________________________________________________________________________
>
>     The FreeSWITCH project is sponsored by SignalWire
>     https://signalwire.com <https://signalwire.com>
>     Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>     services.
>     Build your next product on our scalable cloud platform.
>
>     Join our online community to chat in real time
>     https://signalwire.community <https://signalwire.community>
>
>     Professional FreeSWITCH Services
>     sales at freeswitch.com<mailto:sales at freeswitch.com> <mailto:sales at freeswitch.com<mailto:sales at freeswitch.com>>
>     https://freeswitch.com <https://freeswitch.com>
>
>     Official FreeSWITCH Sites
>     https://freeswitch.com/oss <https://freeswitch.com/oss>
>     https://freeswitch.org/confluence <https://freeswitch.org/confluence>
>     https://cluecon.com <https://cluecon.com>
>
>     FreeSWITCH-users mailing list
>     FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
>     <mailto:FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>>
>     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>     <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
>     UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>     <http://lists.freeswitch.org/mailman/options/freeswitch-users>
>     https://freeswitch.com <https://freeswitch.com>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com<mailto:sales at freeswitch.com>
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>


Christian Berger


 [cid:image001.jpg at 01D80961.DAD8AB20]

foncloud GmbH & Co KG
Hahlweg 2a
36093 Künzell

Tel: /
Fax: +49 661 968990-99
Email: Christian.Berger at foncloud.net<mailto:Christian.Berger at foncloud.net>
Web: www.foncloud.net<http://www.foncloud.net>

P.S.: Wussten Sie schon?
Unter https://www.foncloud.net/wissen  finden Sie zahlreiche Informationen und hilfreiche Artikel rund um unsere Produkte und Services.

Registergericht: Amtsgericht Fulda, Persönlich haftende Gesellschafterin der foncloud GmbH&Co.KG: Global Brain Network GmbH
Geschäftsführer der Global Brain Network GmbH: Peter Krug Sitz der Gesellschaft: Künzell.

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.


_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com


_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
This communication is for informational purposes only. All market prices, data and other information are not warranted as to completeness or accuracy and are subject to change without notice. Present message and any attached files may be or contain privileged information and is the property exclusive of ASSECO SEE CAPITAL GROUP. This transmission may contain information that is privileged, confidential, legally privileged, and/or exempt from disclosure under applicable law. The information contained in this message is solely intended for the physical or legal person to whom it is addressed and to the authorized persons for receiving it. In the case you are not the intended recipient or the authorized person to receive this message, we inform that disclosure, duplicate, distribution or taking up any actions on information contained in this message are strictly forbidden and are under civil and legal responsibility. In case you received it by error, you are requested to notify the sender and to destroy the original e-mail message from your system. Opinions, conclusions or any other information contained into this message, which are not related to ASSECO SEE CAPITAL GROUP activity must not be understood to be expressed or should be endorsed by ASSECO SEE CAPITAL GROUP. The interpretation expressed in the present message did not reflect ASSECO SEE CAPITAL GROUP opinion.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/0fc7eade/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2174 bytes
Desc: image001.jpg
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/0fc7eade/attachment-0001.jpg>

From gregor at infomedia.si  Fri Jan 14 15:34:36 2022
From: gregor at infomedia.si (Gregor Nanger)
Date: Fri, 14 Jan 2022 16:34:36 +0100
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
	"ORIGINATOR_CANCEL".
In-Reply-To: <mailman.4930.1642173328.1264.freeswitch-users@lists.freeswitch.org>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
 <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
 <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>
 <763e7efb-81e0-edf3-3a36-d8acc8721af0@foncloud.net>
 <CAC7ttFE0m+v3v4MtdHFnd9XR0=F9vQ+q34DG49GVfzGPgubkEA@mail.gmail.com>
 <CAGvJV4pgJcR9x1uMvF5ecewTkZSjoqSfLbq3OBO_xKy-qsmvDw@mail.gmail.com>
 <mailman.4930.1642173328.1264.freeswitch-users@lists.freeswitch.org>
Message-ID: <CAC7ttFEv+ODZjQW-6StJCZMnk2dOEdX=OrRCTC8ze=Ev3O3qgQ@mail.gmail.com>

Thank you, Christian, Peter and Zvonimir 👍

On Fri, 14 Jan 2022 at 16:16, Zvonimir Bužanić via FreeSWITCH-users <
freeswitch-users at lists.freeswitch.org> wrote:

>
>
>
> ---------- Forwarded message ----------
> From: "Zvonimir Bužanić" <Zvonimir.Buzanic at asseco-see.hr>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Fri, 14 Jan 2022 15:14:50 +0000
> Subject: RE: [Freeswitch-users] Issue with Enterprise originate and 487
> "ORIGINATOR_CANCEL".
>
> Hi, I've created pull request:
>
>
>
> https://github.com/signalwire/freeswitch/pull/1520
>
>
>
> BR, Zvonimir
>
>
>
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> *On
> Behalf Of *Dragos Oancea
> *Sent:* 14. siječnja 2022. 14:04
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] Issue with Enterprise originate and 487
> "ORIGINATOR_CANCEL".
>
>
>
> https://freeswitch.org/confluence/display/FREESWITCH/Pull+Requests
>
>
>
> It's necessary to create a fork.
>
>
>
>
>
>
>
> On Fri, Jan 14, 2022 at 2:20 PM Gregor Nanger <gregor at infomedia.si> wrote:
>
> I think that for Pull Request you do not need any special permissions. Or
> I could be wrong.
>
>
>
> Can someone advise on this as this patch is really useful and it is a
> waste to lose it.
>
>
>
> BR, Gregor
>
>
>
> On Fri, 14 Jan 2022 at 13:09, Christian Berger <
> christian.berger at foncloud.net> wrote:
>
> Unfortunately I do not have the privileges to create a branch on this
> project. This seems to be necessary to create a pull request.
>
> Am 14.01.22 um 12:47 schrieb Dragos Oancea:
> > Creator of the patch must create a PR in Github against FSs master
> > branch in order to be reviewed.
> >
> > On Fri, Jan 14, 2022 at 9:48 AM Gregor Nanger <gregor at infomedia.si
> > <mailto:gregor at infomedia.si>> wrote:
> >
> >     Guys, does anyone know, if this fix will be included in new
> >     freeswitch version?
> >
> >
> >
> >     On Wed, 27 Oct 2021 at 19:13, Jai Rangi <jprangi at gmail.com
> >     <mailto:jprangi at gmail.com>> wrote:
> >
> >         Thank you Peter and Christian.
> >
> >         On Fri, Oct 22, 2021 at 7:19 AM Peter Steinbach
> >         <lists at telefaks.de <mailto:lists at telefaks.de>> wrote:
> >
> >             Just to mention: The patch was developed by Christian Berger
> >             from our client Foncloud. Thank you Christian!
> >
> >             Best regards
> >             Peter
> >
> >
> >             Am 21.10.21 um 17:20 schrieb Peter Steinbach:
> >>
> >>             Hello,
> >>
> >>
> >>             this is a long lasting issue I firstly posted in 2017 and
> >>             lastly saw in 2019 in this thread, and I am happy to
> >>             announce, that we have found a solution for this.
> >>
> >>             Here is the patch, which works pretty well in our
> environment
> >>
> >>
> ===================================================================================================
>
> >>
> >>             --- freeswitch_orig/src/switch_ivr_originate.c 2021-10-20
> >>             12:51:04.863328041 +0200
> >>             +++ freeswitch/src/switch_ivr_originate.c    2021-10-20
> >>             12:54:15.764616280 +0200
> >>             @@ -1789,7 +1789,13 @@
> >>                      if (cancel_cause && *cancel_cause > 0) {
> >>                          handles[i].cancel_cause = *cancel_cause;
> >>                      } else {
> >>             -            handles[i].cancel_cause =
> SWITCH_CAUSE_LOSE_RACE;
> >>             +            if ((hp!=NULL) &&
> >>             (hp->cause==SWITCH_CAUSE_SUCCESS)) { //Was this call taken
> >>             by another destination?
> >>             +                //Yes, the race was lost
> >>             +                handles[i].cancel_cause =
> >>             SWITCH_CAUSE_LOSE_RACE;
> >>             +            } else {
> >>             +                //No, something else happened, probably
> >>             Originator Cancel
> >>             +                handles[i].cancel_cause =
> >>             SWITCH_CAUSE_ORIGINATOR_CANCEL;
> >>             +            }
> >>                      }
> >>                  }
> >>
> ===================================================================================================
>
> >>
> >>
> >>             Can someone retest this and check this in?
> >>
> >>
> >>             --
> >>             With kind regards
> >>             Peter Steinbach
> >>
> >>             Telefaks Services GmbH
> >>             mailto:lists  <mailto:lists>  (att)telefaks.de  <
> http://telefaks.de>
> >>             Internet:www.telefaks.de  <http://www.telefaks.de>
> >>
> >>             Am 22.05.19 um 21:14 schrieb Jai Rangi:
> >>>             All,
> >>>             Running into a small issue with group calling, when the
> >>>             original caller hang up, phones dont show that call as
> >>>             missed call, cause of wrong reason code from freeswitch.
> >>>             Scenario:
> >>>
> >>>               * Caller -> FS (Groupcall) to 101 and 102
> >>>               * Phones ring
> >>>               * Caller hangup
> >>>               * Phones should see missed calls,
> >>>               * But free-switch send cancel with Reason:
> >>>                 SIP;cause=200;text="Call completed elsewhere", where
> >>>                 is should send Reason:
> >>>                 SIP;cause=487;text="ORIGINATOR_CANCEL".
> >>>
> >>>             Here is what my bridge data.
> >>>
> >>>
>
> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>
> >>>
> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>
> >>>             ]user/101 at 192.168.5.50:_:[ignore_early_media=true,leg_timeout=20
>
> >>>             ]user/102 at 192.168.5.50 <mailto:102 at 192.168.5.50>)
> >>>
> >>>             If I send
> >>>
> bridge(<all_threads=true,absolute_codec_string=PCMU,PCMA,G729,group_confirm_file=playback
>
> >>>
> /usr/local/freeswitch/sound/ivr/1443458342.wav,group_confirm_key=exec>{sip_cid_type=rpid,ignore_early_media=true,originate_timeout=30}[leg_timeout=20
>
> >>>             ]user/101 at 192.168.5.50 <mailto:101 at 192.168.5.50>
> >>>
> >>>             Everything works fine.
> >>>             I see some old posts but no resolution.
> >>>             Freeswitch version on Debian 8.9
> >>>             FreeSWITCH (Version 1.6.16 git 3da6bd0 2017-04-07
> >>>             16:49:13Z 64bit)
> >>>
> >>>             Any idea or suggestion for workaround?
> >>>
> >>>             Jai
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> _________________________________________________________________________
> >>>
> >>>             The FreeSWITCH project is sponsored by SignalWire
> https://signalwire.com  <https://signalwire.com>
> >>>             Enhance your FreeSWITCH install with disruptive priced SMS
> and PSTN services.
> >>>             Build your next product on our scalable cloud platform.
> >>>
> >>>             Join our online community to chat in real time
> https://signalwire.community  <https://signalwire.community>
> >>>
> >>>             Professional FreeSWITCH Services
> >>>             sales at freeswitch.com  <mailto:sales at freeswitch.com>
> >>>             https://freeswitch.com  <https://freeswitch.com>
> >>>
> >>>             Official FreeSWITCH Sites
> >>>             https://freeswitch.com/oss  <https://freeswitch.com/oss>
> >>>             https://freeswitch.org/confluence  <
> https://freeswitch.org/confluence>
> >>>             https://cluecon.com  <https://cluecon.com>
> >>>
> >>>             FreeSWITCH-users mailing list
> >>>             FreeSWITCH-users at lists.freeswitch.org  <mailto:
> FreeSWITCH-users at lists.freeswitch.org>
> >>>
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users  <
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >>>             UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users  <
> http://lists.freeswitch.org/mailman/options/freeswitch-users>
> >>>             https://freeswitch.com  <https://freeswitch.com>
> >
> _________________________________________________________________________
> >
> >             The FreeSWITCH project is sponsored by SignalWire
> >             https://signalwire.com <https://signalwire.com>
> >             Enhance your FreeSWITCH install with disruptive priced SMS
> >             and PSTN services.
> >             Build your next product on our scalable cloud platform.
> >
> >             Join our online community to chat in real time
> >             https://signalwire.community <https://signalwire.community>
> >
> >             Professional FreeSWITCH Services
> >             sales at freeswitch.com <mailto:sales at freeswitch.com>
> >             https://freeswitch.com <https://freeswitch.com>
> >
> >             Official FreeSWITCH Sites
> >             https://freeswitch.com/oss <https://freeswitch.com/oss>
> >             https://freeswitch.org/confluence
> >             <https://freeswitch.org/confluence>
> >             https://cluecon.com <https://cluecon.com>
> >
> >             FreeSWITCH-users mailing list
> >             FreeSWITCH-users at lists.freeswitch.org
> >             <mailto:FreeSWITCH-users at lists.freeswitch.org>
> >
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >             UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >             <http://lists.freeswitch.org/mailman/options/frees
> witch-users>
> >             https://freeswitch.com <https://freeswitch.com>
> >
> >
> _________________________________________________________________________
> >
> >         The FreeSWITCH project is sponsored by SignalWire
> >         https://signalwire.com <https://signalwire.com>
> >         Enhance your FreeSWITCH install with disruptive priced SMS and
> >         PSTN services.
> >         Build your next product on our scalable cloud platform.
> >
> >         Join our online community to chat in real time
> >         https://signalwire.community <https://signalwire.community>
> >
> >         Professional FreeSWITCH Services
> >         sales at freeswitch.com <mailto:sales at freeswitch.com>
> >         https://freeswitch.com <https://freeswitch.com>
> >
> >         Official FreeSWITCH Sites
> >         https://freeswitch.com/oss <https://freeswitch.com/oss>
> >         https://freeswitch.org/confluence
> >         <https://freeswitch.org/confluence>
> >         https://cluecon.com <https://cluecon.com>
> >
> >         FreeSWITCH-users mailing list
> >         FreeSWITCH-users at lists.freeswitch.org
> >         <mailto:FreeSWITCH-users at lists.freeswitch.org>
> >         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >         <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >         UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >         <http://lists.freeswitch.org/mailman/options/freeswitch-users>
> >         https://freeswitch.com <https://freeswitch.com>
> >
> >
> >
> >     --
> >     Gregor Nanger
> >       *CTO*
> >     t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
> >     • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
> >     • www.infomedia.si <http://www.infomedia.si>
> >
> >
> _________________________________________________________________________
> >
> >     The FreeSWITCH project is sponsored by SignalWire
> >     https://signalwire.com <https://signalwire.com>
> >     Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> >     services.
> >     Build your next product on our scalable cloud platform.
> >
> >     Join our online community to chat in real time
> >     https://signalwire.community <https://signalwire.community>
> >
> >     Professional FreeSWITCH Services
> >     sales at freeswitch.com <mailto:sales at freeswitch.com>
> >     https://freeswitch.com <https://freeswitch.com>
> >
> >     Official FreeSWITCH Sites
> >     https://freeswitch.com/oss <https://freeswitch.com/oss>
> >     https://freeswitch.org/confluence <https://freeswitch.org/confluence>
>
> >     https://cluecon.com <https://cluecon.com>
> >
> >     FreeSWITCH-users mailing list
> >     FreeSWITCH-users at lists.freeswitch.org
> >     <mailto:FreeSWITCH-users at lists.freeswitch.org>
> >     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >     <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>
> >     UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >     <http://lists.freeswitch.org/mailman/options/freeswitch-users>
> >     https://freeswitch.com <https://freeswitch.com>
> >
> >
> >
> _________________________________________________________________________
> >
> > The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> > Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> > Build your next product on our scalable cloud platform.
> >
> > Join our online community to chat in real time
> https://signalwire.community
> >
> > Professional FreeSWITCH Services
> > sales at freeswitch.com
> > https://freeswitch.com
> >
> > Official FreeSWITCH Sites
> > https://freeswitch.com/oss
> > https://freeswitch.org/confluence
> > https://cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > https://freeswitch.com
> >
>
>
> Christian Berger
>
>
>
>
> foncloud GmbH & Co KG
> Hahlweg 2a
> 36093 Künzell
>
> Tel: /
> Fax: +49 661 968990-99
>
> Email: Christian.Berger at foncloud.net
> Web: www.foncloud.net
>
>
>
> *P.S.: Wussten Sie schon? *
>
> *Unter https://www.foncloud.net/wissen <https://www.foncloud.net/wissen>
> finden Sie zahlreiche Informationen und hilfreiche Artikel rund um unsere
> Produkte und Services.*
>
>
>
> Registergericht: Amtsgericht Fulda, Persönlich haftende Gesellschafterin
> der foncloud GmbH&Co.KG: Global Brain Network GmbH
>
> Geschäftsführer der Global Brain Network GmbH: Peter Krug Sitz der
> Gesellschaft: Künzell.
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
> irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und
> vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
> Weitergabe dieser Mail ist nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information. If you
> are not the intended recipient (or have received this e-mail in error)
> please notify the sender immediately and destroy this e-mail. Any
> unauthorised copying, disclosure or distribution of the material in this
> e-mail is strictly forbidden.
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> This communication is for informational purposes only. All market prices,
> data and other information are not warranted as to completeness or accuracy
> and are subject to change without notice. Present message and any attached
> files may be or contain privileged information and is the property
> exclusive of ASSECO SEE CAPITAL GROUP. This transmission may contain
> information that is privileged, confidential, legally privileged, and/or
> exempt from disclosure under applicable law. The information contained in
> this message is solely intended for the physical or legal person to whom it
> is addressed and to the authorized persons for receiving it. In the case
> you are not the intended recipient or the authorized person to receive this
> message, we inform that disclosure, duplicate, distribution or taking up
> any actions on information contained in this message are strictly forbidden
> and are under civil and legal responsibility. In case you received it by
> error, you are requested to notify the sender and to destroy the original
> e-mail message from your system. Opinions, conclusions or any other
> information contained into this message, which are not related to ASSECO
> SEE CAPITAL GROUP activity must not be understood to be expressed or should
> be endorsed by ASSECO SEE CAPITAL GROUP. The interpretation expressed in
> the present message did not reflect ASSECO SEE CAPITAL GROUP opinion.
>
>
>
> ---------- Forwarded message ----------
> From: "Zvonimir Bužanić via FreeSWITCH-users" <
> freeswitch-users at lists.freeswitch.org>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Bcc:
> Date: Fri, 14 Jan 2022 07:16:06 -0800 (PST)
> Subject: Re: [Freeswitch-users] Issue with Enterprise originate and 487
> "ORIGINATOR_CANCEL".
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/b5530c7b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2174 bytes
Desc: not available
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/b5530c7b/attachment-0001.jpg>

From christian.berger at foncloud.net  Fri Jan 14 15:36:05 2022
From: christian.berger at foncloud.net (Christian Berger)
Date: Fri, 14 Jan 2022 16:36:05 +0100
Subject: [Freeswitch-users] Issue with Enterprise originate and 487
 "ORIGINATOR_CANCEL".
In-Reply-To: <mailman.4930.1642173328.1264.freeswitch-users@lists.freeswitch.org>
References: <CAPfjz3hJNH4rhbeMb3LkboN2NC3VQoW890cVr8i4UJbdRTjgkg@mail.gmail.com>
 <26f9382e-1c6c-6da0-0b49-3db8633668c2@telefaks.de>
 <938b5330-fe6a-d155-37ce-3260c69a7bc1@telefaks.de>
 <CAPfjz3jLeub7A0aA1Y8FNSoPBOTch9MzFD6iuNMX=RkCs9eJ6Q@mail.gmail.com>
 <CAC7ttFF501JKm-6ufhUGswnAFUpumjJ+9Y6xFX3dSU5sP3uzzQ@mail.gmail.com>
 <CAGvJV4o=2pgwVKy1TGCFrYDggs6Ew1MuCYQTBZHUAyCOxV1Wjg@mail.gmail.com>
 <763e7efb-81e0-edf3-3a36-d8acc8721af0@foncloud.net>
 <CAC7ttFE0m+v3v4MtdHFnd9XR0=F9vQ+q34DG49GVfzGPgubkEA@mail.gmail.com>
 <CAGvJV4pgJcR9x1uMvF5ecewTkZSjoqSfLbq3OBO_xKy-qsmvDw@mail.gmail.com>
 <mailman.4930.1642173328.1264.freeswitch-users@lists.freeswitch.org>
Message-ID: <f0cfd2a9-b9cd-e9ce-c7bc-fb6282e99dee@foncloud.net>

Thanks :)

Am 14.01.22 um 16:15 schrieb Zvonimir Bužanić via FreeSWITCH-users:
> Hi, I've created pull request:
> 
> https://github.com/signalwire/freeswitch/pull/1520



Christian Berger


 

foncloud GmbH & Co KG
Hahlweg 2a
36093 Künzell

Tel: / 
Fax: +49 661 968990-99

 

Email: Christian.Berger at foncloud.net
 Web: www.foncloud.net





P.S.: Wussten Sie schon? 

Unter https://www.foncloud.net/wissen  finden Sie zahlreiche Informationen und hilfreiche Artikel rund um unsere Produkte und Services.

 


Registergericht: Amtsgericht Fulda, Persönlich haftende Gesellschafterin der foncloud GmbH&Co.KG: Global Brain Network GmbHGeschäftsführer der Global Brain Network GmbH: Peter Krug Sitz der Gesellschaft: Künzell.

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/54ad90e8/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0eb5f48c.e33a6fec.jpg
Type: image/jpeg
Size: 56822 bytes
Desc: not available
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220114/54ad90e8/attachment-0001.jpg>

From Carsten.Gericke at ilink.de  Wed Jan 12 11:28:57 2022
From: Carsten.Gericke at ilink.de (ilink)
Date: Wed, 12 Jan 2022 12:28:57 +0100
Subject: [Freeswitch-users] SIP on all interfaces
Message-ID: <CCDCCD3E-0966-47B0-A8A7-31696C95EB5D@ilink.de>

Dear community,

I try to operate freeswitch 1.8 on Google Cloud with a Goggle external load balancer in front of the freeswitch instance.

Freeswitch listens on the private IP address:

netstat -na | grep :5080
tcp        0      0 10.210.32.12:5080       0.0.0.0:*               LISTEN     

But I seeking for ways to have freeswitch listen on everything and it should look like this:
tcp        0      0 0.0.0.0:5080       0.0.0.0:*               LISTEN     

A similar wish was posted in 2015:
http://lists.freeswitch.org/pipermail/freeswitch-users/2015-October/116478.html <http://lists.freeswitch.org/pipermail/freeswitch-users/2015-October/116478.html>

The proposed solutions does not work for my, since I only have this 10.210.32.12 interface but the IP packet arrives with the public IP address from the load balancer.
Hard to believe. But as proof of the situation, it is described here:
https://cloudplatform.googleblog.com/2015/07/Debugging-Health-Checks-in-Load-Balancing-on-Google-Compute-Engine.html <https://cloudplatform.googleblog.com/2015/07/Debugging-Health-Checks-in-Load-Balancing-on-Google-Compute-Engine.html>

No I try to configure something in freeswitch to listen on 0.0.0.0 instead of the the private IP address.
If this is not working, I may need to try Kamailio (or similar) in front of the freeswitch, that listens on 0.0.0.0

Any advice/guidance?

Best,
Carsten
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220112/c12da68b/attachment.html>

From Antony.Stone at freeswitch.open.source.it  Tue Jan 18 17:45:56 2022
From: Antony.Stone at freeswitch.open.source.it (Antony Stone)
Date: Tue, 18 Jan 2022 18:45:56 +0100
Subject: [Freeswitch-users] SIP on all interfaces
In-Reply-To: <CCDCCD3E-0966-47B0-A8A7-31696C95EB5D@ilink.de>
References: <CCDCCD3E-0966-47B0-A8A7-31696C95EB5D@ilink.de>
Message-ID: <202201181845.56618.Antony.Stone@freeswitch.open.source.it>

On Wednesday 12 January 2022 at 12:28:57, ilink wrote:

> Freeswitch listens on the private IP address:
> 
> netstat -na | grep :5080
> tcp        0      0 10.210.32.12:5080       0.0.0.0:*               LISTEN

> I only have this 10.210.32.12 interface but the IP packet arrives with the
> public IP address from the load balancer.

> No I try to configure something in freeswitch to listen on 0.0.0.0 instead
> of the the private IP address. If this is not working, I may need to try
> Kamailio (or similar) in front of the freeswitch, that listens on 0.0.0.0
> 
> Any advice/guidance?

Changing FreeSwich to listen on 0.0.0.0 will not make any difference, since you 
do not *have* any interface with the public IP address you say the packets are 
addressed to, therefore FreeSwitch still won't recognise packets sent to that 
address as being for it to process.

What you need to do is apply a Destination NAT firewall rule on incoming 
packets so that anything which arrives going to 198.51.100.42 (or whatever 
your public IP address is) get redirected to 10.210.32.12 instead.

This does sound like a bizarre networking arrangement for Google to give 
people, though.


Antony.

-- 
What do you get when you cross a joke with a rhetorical question?

                                                   Please reply to the list;
                                                         please *don't* CC me.


From mahmood.alkhalil at outlook.com  Thu Jan 20 08:49:53 2022
From: mahmood.alkhalil at outlook.com (Mahmood Alkhalil)
Date: Thu, 20 Jan 2022 08:49:53 +0000
Subject: [Freeswitch-users] Add new line ending after mod_event_socket JSON
	event
Message-ID: <PA4PR04MB79673927C50521B12D10DFC2995A9@PA4PR04MB7967.eurprd04.prod.outlook.com>

Hi FS Community,

I'm trying to add a '\n' new line after the JSON event sent from FS on the mod_event_socket when the event type is JSON, I need to do so as I'm writing a JAVA event parser and it would make the code much simpler if I can add this new line after the event.

I'm not able to know where to edit exactly in the mod_event_scoket file (I have no experience in C lang at all) but I think it is somewhere around line 1274.

If someone could help with this, I would really appreciate it.

(the java socket lib am writing uses Netty DelimiterBasedFrameDecoder on '\n' nut it breaks as after the JSON event there is no new line and Content-Length: is directly written after the JSON event)

Mahmood Alkhalil.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220120/4cc832aa/attachment.html>

From david.villasmil.work at gmail.com  Thu Jan 20 10:29:52 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Thu, 20 Jan 2022 10:29:52 +0000
Subject: [Freeswitch-users] 480 to 408 on call_timeout/leg_timeout
Message-ID: <CAFGRPVoOovXoEL35onkofzGm34TqQnQS9OcCxXnSO++MK=nndA@mail.gmail.com>

Hello all,

Is there really no way of replacing 480 with a “408 no user response” on a
call/leg timeout without using lua?

David
-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220120/58da2436/attachment.html>

From mahmood.alkhalil at outlook.com  Thu Jan 20 11:13:36 2022
From: mahmood.alkhalil at outlook.com (Mahmood Alkhalil)
Date: Thu, 20 Jan 2022 11:13:36 +0000
Subject: [Freeswitch-users] Add new line ending after mod_event_socket
 JSON	event
In-Reply-To: <PA4PR04MB79673927C50521B12D10DFC2995A9@PA4PR04MB7967.eurprd04.prod.outlook.com>
References: <PA4PR04MB79673927C50521B12D10DFC2995A9@PA4PR04MB7967.eurprd04.prod.outlook.com>
Message-ID: <PA4PR04MB79678EA9B19D48BCA22E46C4995A9@PA4PR04MB7967.eurprd04.prod.outlook.com>

Hi,

So I figured it out

static switch_status_t read_packet(listener_t *listener, switch_event_t **event, uint32_t timeout)
{
       switch_size_t mlen, bytes = 0;
       char *mbuf = NULL;
       char newLine[2] = "\n";  //added this new line str
       char buf[1024] = "";
       switch_size_t len;
       switch_status_t status = SWITCH_STATUS_SUCCESS;
.
.
.
.
.

if (switch_test_flag(listener, LFLAG_EVENTS)) {
                               while (switch_queue_trypop(listener->event_queue, &pop) == SWITCH_STATUS_SUCCESS) {
                                       char hbuf[512];
                                       switch_event_t *pevent = (switch_event_t *) pop;
                                       char *etype;

                                       do_sleep = 0;
                                       if (listener->format == EVENT_FORMAT_PLAIN) {
                                               etype = "plain";
                                               switch_event_serialize(pevent, &listener->ebuf, SWITCH_TRUE);
                                       } else if (listener->format == EVENT_FORMAT_JSON) {
                                               etype = "json";
                                               switch_event_serialize_json(pevent, &listener->ebuf);
                                               strcat(listener->ebuf, newLine); //concatenate new line str to the event
                                       } else {
                                               switch_xml_t xml;
                                               etype = "xml";

                                               if ((xml = switch_event_xmlize(pevent, SWITCH_VA_NONE))) {
                                                       listener->ebuf = switch_xml_toxml(xml, SWITCH_FALSE);
                                                       switch_xml_free(xml);
                                               } else {
                                                       switch_log_printf(SWITCH_CHANNEL_SESSION_LOG(listener->sessio>
                                                       goto endloop;
                                               }
                                       }



Mahmood Alkhalil.
________________________________
From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> on behalf of Mahmood Alkhalil <mahmood.alkhalil at outlook.com>
Sent: Thursday, January 20, 2022 10:49 AM
To: freeswitch-users at lists.freeswitch.org <freeswitch-users at lists.freeswitch.org>
Subject: [Freeswitch-users] Add new line ending after mod_event_socket JSON event

Hi FS Community,

I'm trying to add a '\n' new line after the JSON event sent from FS on the mod_event_socket when the event type is JSON, I need to do so as I'm writing a JAVA event parser and it would make the code much simpler if I can add this new line after the event.

I'm not able to know where to edit exactly in the mod_event_scoket file (I have no experience in C lang at all) but I think it is somewhere around line 1274.

If someone could help with this, I would really appreciate it.

(the java socket lib am writing uses Netty DelimiterBasedFrameDecoder on '\n' nut it breaks as after the JSON event there is no new line and Content-Length: is directly written after the JSON event)

Mahmood Alkhalil.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220120/80ad39cf/attachment-0001.html>

From brian at freeswitch.com  Thu Jan 20 18:14:59 2022
From: brian at freeswitch.com (Brian West)
Date: Thu, 20 Jan 2022 12:14:59 -0600
Subject: [Freeswitch-users] Looking for an issue...
Message-ID: <CAEJMVkDSsjvMEZUzF6pwpX-NDuPjHJBe+OSt_7q1ErcObBHO1Q@mail.gmail.com>

FreeSWITCHers,

I've been tracing an issue down for bit, Many on this list have experienced
the situation, The end result is the session still shows in "show channels"
but uuid_kill says "-ERR No such channel!", A gcore will still show the
session in the session table when using our gdbinit, If you've experienced
this problem before please let me know.  Any feedback may help me narrow
down the root cause.

Thanks,
Brian West


-- 

Brian West | Co-founder and Developer

Need Commercial support? email sales at freeswitch.com

FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
<https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>

Email: brian at freeswitch.com

Mobile: 918-424-9378

Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>

[image: https://www.facebook.com/signalwireinc?src=email]
<https://www.facebook.com/freeswitch> [image:
https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220120/0d2a3aac/attachment.html>

From ciprian.dosoftei at gmail.com  Thu Jan 20 20:12:03 2022
From: ciprian.dosoftei at gmail.com (Ciprian Dosoftei)
Date: Thu, 20 Jan 2022 15:12:03 -0500
Subject: [Freeswitch-users] Looking for an issue...
In-Reply-To: <CAEJMVkDSsjvMEZUzF6pwpX-NDuPjHJBe+OSt_7q1ErcObBHO1Q@mail.gmail.com>
References: <CAEJMVkDSsjvMEZUzF6pwpX-NDuPjHJBe+OSt_7q1ErcObBHO1Q@mail.gmail.com>
Message-ID: <CAEKk1MA5Cb9R53bw=7ugcWwLTj2MvoxnuzpH4tER6Zp+-5noZw@mail.gmail.com>

Hi Brian --

Thanks for looking into this; I've definitely experienced this behaviour in
the past and still notice it occasionally.

In my use case, most calls land in a conference room and typically end
there, no other crazy special sauce.

Over the years, I had the opportunity to identify one of the root causes on
my side: using mod_xml_cdr to post CDRs to a designated host, I've noticed
if the latter is under stress, the call can enter the said zombie state
until it receives a 200 OK. Fixing the issue on our end allowed the
channels to transition quickly from CS_REPORTING and succumb gracefully.

On Thu, 20 Jan 2022 at 13:44, Brian West <brian at freeswitch.com> wrote:

> FreeSWITCHers,
>
> I've been tracing an issue down for bit, Many on this list have
> experienced the situation, The end result is the session still shows in
> "show channels" but uuid_kill says "-ERR No such channel!", A gcore will
> still show the session in the session table when using our gdbinit, If
> you've experienced this problem before please let me know.  Any feedback
> may help me narrow down the root cause.
>
> Thanks,
> Brian West
>
>
> --
>
> Brian West | Co-founder and Developer
>
> Need Commercial support? email sales at freeswitch.com
>
> FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
> <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>
>
> Email: brian at freeswitch.com
>
> Mobile: 918-424-9378
>
> Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>
>
> [image: https://www.facebook.com/signalwireinc?src=email]
> <https://www.facebook.com/freeswitch> [image:
> https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 
Best Regards,
Ciprian Dosoftei

The information transmitted is intended only for the addressee and may
contain privileged and/or confidential material. If you are not the
intended recipient, kindly contact the sender and delete the message.

Any disclosure, distribution or copying of this message is strictly
prohibited without the expressed permission of the sender.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220120/7e48228f/attachment.html>

From david.villasmil.work at gmail.com  Fri Jan 21 20:39:52 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 21 Jan 2022 20:39:52 +0000
Subject: [Freeswitch-users] sched_broadcast
Message-ID: <CAFGRPVqNO4YgxDNELibnJ10f1HUwOtpcfnXriZKQaig8jxBQ4A@mail.gmail.com>

Hello all,

So i'm trying to get a sched_broadcast's task id so that i can later cancel
it if needed.

Problem is sched_broadcast returns:

+OK Message scheduled

sched_hangup doesn't return an id either (this is all in the xml dialplan)


Anyone knows what i'm doing wrong?

Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220121/4a84d9ce/attachment.html>

From babak.yakhchali at gmail.com  Sat Jan 22 06:15:43 2022
From: babak.yakhchali at gmail.com (Babak Yakhchali)
Date: Sat, 22 Jan 2022 09:45:43 +0330
Subject: [Freeswitch-users] sched_broadcast
In-Reply-To: <CAFGRPVqNO4YgxDNELibnJ10f1HUwOtpcfnXriZKQaig8jxBQ4A@mail.gmail.com>
References: <CAFGRPVqNO4YgxDNELibnJ10f1HUwOtpcfnXriZKQaig8jxBQ4A@mail.gmail.com>
Message-ID: <CAD3oNZwnOCEyFyYX0=C9trFCg7hfYZK3zEyMF3bwM5YfKCUwRg@mail.gmail.com>

Hi
Is last_sched_id set on the channel after you call sched_broadcast?

On Sat, Jan 22, 2022 at 12:48 AM David Villasmil <
david.villasmil.work at gmail.com> wrote:

> Hello all,
>
> So i'm trying to get a sched_broadcast's task id so that i can later
> cancel it if needed.
>
> Problem is sched_broadcast returns:
>
> +OK Message scheduled
>
> sched_hangup doesn't return an id either (this is all in the xml dialplan)
>
>
> Anyone knows what i'm doing wrong?
>
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220122/4fbe4c7a/attachment.html>

From Mirjana.Jovanovic at c4b.de  Wed Jan 26 07:10:56 2022
From: Mirjana.Jovanovic at c4b.de (Mirjana Jovanovic)
Date: Wed, 26 Jan 2022 07:10:56 +0000
Subject: [Freeswitch-users] Call is not terminated due to media_timeout
Message-ID: <a9ae642eebd744c5b100440ee57cb62a@c4b.de>

Hello,

I have the following issue:

  1.  An audio call is started from a client application
  2.  Connection is established
  3.  Client crashes (or is terminated manually through task manager)
  4.  The call is never terminated because of MEDIA_TIMEOUT

I would expect the call to be dropped after the configured threshold for media timeout. I have traced the call to verify that no packages have been received from the client, after the client application has been terminated.

The value for the channel variable media_timeout has been set, and also an action to be executed on media timeout (execute_on_media_timeout) has been defined.

However, it seems that  call status never changes to MEDIA_TIMEOUT, and therefore the call is never dropped.

Are there additional/related properties that need to be set for this to work?

Thanks


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220126/86d36ed5/attachment.html>

From francesco.piccinin at insiel.it  Wed Jan 26 16:38:39 2022
From: francesco.piccinin at insiel.it (Piccinin Francesco)
Date: Wed, 26 Jan 2022 16:38:39 +0000
Subject: [Freeswitch-users] Dialplan apps clarification transfer &
	execute_extension
Message-ID: <DU0PR02MB7900FCF54036D497E172024288209@DU0PR02MB7900.eurprd02.prod.outlook.com>

Hi guys,
I really  don't understand well mod_dptools: transfer.

In the documentation I read:

"Immediately transfer the calling channel to a new context. If there happens to be an xml extension named <destination_number> then control is "warped" directly to that extension.  Otherwise it goes through the entire context checking for a match."

I have this instruction in my dialplan:

<action application="transfer" data="extension_C XML calls"/>

and a dialplan file like this:

<include>
<context name="calls">
       <extension name="test_1" continue="true">
            <condition>
                  <action application="log" data="ERR ****** i'm in Test1"/>
            </condition>
       </extension>
       <extension name="test_2" continue="true">
            <condition>
                  <action application="log" data="ERR ****** i'm in Test2"/>
            </condition>
       </extension>
       <extension name="extension_C">
            <condition>
                  <action application="log" data="ERR ****** i'm in extension_C"/>
            </condition>
       </extension>
</context>
</include>

isn't Freeswitch supposed to go stright to "extension_C"?
in logs I can see that it executes all the extensions as they appears in the calls context.
Maybe is there anything I'm missing?

Thanks
Regards


Francesco Piccinin
Telecomunicazioni
Infrastrutture

Insiel S.p.A.
via San Francesco d'Assisi, 43
34133 - Trieste (TS) Italia
tel +39 040 3737752
mob +39 335 1329440
francesco.piccinin at insiel.it<mailto:francesco.piccinin at insiel.it>
www.insiel.it<http://www.insiel.it>


AVVISO DI RISERVATEZZA Informazioni riservate possono essere contenute nel messaggio o nei suoi allegati. Se non siete i destinatari indicati nel messaggio, o responsabili per la sua consegna alla persona, o se avete ricevuto il messaggio per errore, siete pregati di non trascriverlo, copiarlo o inviarlo ad alcuno. In tal caso vi invitiamo a cancellare il messaggio ed i suoi allegati. Grazie.
CONFIDENTIALITY NOTICE Confidential information may be contained in this message or in its attachments. If you are not the addressee indicated in this message, or responsible for message delivering to that person, or if you have received this message in error, you may not transcribe, copy or deliver this message to anyone. In that case, you should delete this message and its attachments. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220126/c8ab03ea/attachment-0001.html>

From david.villasmil.work at gmail.com  Wed Jan 26 17:56:57 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Wed, 26 Jan 2022 17:56:57 +0000
Subject: [Freeswitch-users] OPUS - is FS ignoring incoming FAC packets?
Message-ID: <CAFGRPVoPMaZJYMC-PmyAWfUY-a1z9NuczkmUCtANQF2s23fqkA@mail.gmail.com>

Hello all,
Wondering if anyone's seen this scenario:

With 15% packet loss, FEC enabled.

- sip -> pstn:
  -- We're seeing FEC out and in
  * client (OPUS) --> FS --> (PCMU/A) B-leg - Result: Choppy Audio
  * client (OPUS) <-- FS <-- (PCMU/A) B-leg - Result: Very good audio

  * client (OPUS) --> FS --> client (OPUS) - Result: Very good audio
  * client (OPUS) <-- FS <-- client (OPUS) - Result: Very good audio

It's like FS is ignoring the incoming FEC when transcoding.
I have a small jitterbuffer 20:100:20

Any ideas?


David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220126/96da1cb5/attachment.html>

From brian at freeswitch.com  Wed Jan 26 18:33:08 2022
From: brian at freeswitch.com (Brian West)
Date: Wed, 26 Jan 2022 12:33:08 -0600
Subject: [Freeswitch-users] OPUS - is FS ignoring incoming FAC packets?
In-Reply-To: <CAFGRPVoPMaZJYMC-PmyAWfUY-a1z9NuczkmUCtANQF2s23fqkA@mail.gmail.com>
References: <CAFGRPVoPMaZJYMC-PmyAWfUY-a1z9NuczkmUCtANQF2s23fqkA@mail.gmail.com>
Message-ID: <CAEJMVkAT9u1mpY1NZyDox9KieBk+wFsWzPXDmVc5+epQVJmMdA@mail.gmail.com>

rtp_jitter_buffer_during_bridge=true, all the stuff in OPUS to process,
manage and deal with FEC requires a jitter buffer to process it.

/b


On Wed, Jan 26, 2022 at 12:16 PM David Villasmil <
david.villasmil.work at gmail.com> wrote:

> Hello all,
> Wondering if anyone's seen this scenario:
>
> With 15% packet loss, FEC enabled.
>
> - sip -> pstn:
>   -- We're seeing FEC out and in
>   * client (OPUS) --> FS --> (PCMU/A) B-leg - Result: Choppy Audio
>   * client (OPUS) <-- FS <-- (PCMU/A) B-leg - Result: Very good audio
>
>   * client (OPUS) --> FS --> client (OPUS) - Result: Very good audio
>   * client (OPUS) <-- FS <-- client (OPUS) - Result: Very good audio
>
> It's like FS is ignoring the incoming FEC when transcoding.
> I have a small jitterbuffer 20:100:20
>
> Any ideas?
>
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 

Brian West | Co-founder and Developer

Need Commercial support? email sales at freeswitch.com

FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
<https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>

Email: brian at freeswitch.com

Mobile: 918-424-9378

Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>

[image: https://www.facebook.com/signalwireinc?src=email]
<https://www.facebook.com/freeswitch> [image:
https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220126/4013e645/attachment.html>

From dragos at freeswitch.org  Wed Jan 26 18:39:39 2022
From: dragos at freeswitch.org (Dragos Oancea)
Date: Wed, 26 Jan 2022 20:39:39 +0200
Subject: [Freeswitch-users] OPUS - is FS ignoring incoming FAC packets?
In-Reply-To: <CAFGRPVoPMaZJYMC-PmyAWfUY-a1z9NuczkmUCtANQF2s23fqkA@mail.gmail.com>
References: <CAFGRPVoPMaZJYMC-PmyAWfUY-a1z9NuczkmUCtANQF2s23fqkA@mail.gmail.com>
Message-ID: <CAGvJV4qqEucMiu1=c3xoiw1+aXHGhvmL_VZvzb2d7s9T5c1uqA@mail.gmail.com>

Short answer: No.

If the client sends FEC packets AND there is packet loss AND FS finds in JB
needed FEC for the missing seq, then it will use it.

It will show in CLI with  "opus_debug on" when it's doing it.




On Wed, Jan 26, 2022 at 7:58 PM David Villasmil <
david.villasmil.work at gmail.com> wrote:

> Hello all,
> Wondering if anyone's seen this scenario:
>
> With 15% packet loss, FEC enabled.
>
> - sip -> pstn:
>   -- We're seeing FEC out and in
>   * client (OPUS) --> FS --> (PCMU/A) B-leg - Result: Choppy Audio
>   * client (OPUS) <-- FS <-- (PCMU/A) B-leg - Result: Very good audio
>
>   * client (OPUS) --> FS --> client (OPUS) - Result: Very good audio
>   * client (OPUS) <-- FS <-- client (OPUS) - Result: Very good audio
>
> It's like FS is ignoring the incoming FEC when transcoding.
> I have a small jitterbuffer 20:100:20
>
> Any ideas?
>
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220126/309c8f64/attachment.html>

From david.villasmil.work at gmail.com  Wed Jan 26 20:38:44 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Wed, 26 Jan 2022 20:38:44 +0000
Subject: [Freeswitch-users] OPUS - is FS ignoring incoming FAC packets?
In-Reply-To: <CAEJMVkAT9u1mpY1NZyDox9KieBk+wFsWzPXDmVc5+epQVJmMdA@mail.gmail.com>
References: <CAFGRPVoPMaZJYMC-PmyAWfUY-a1z9NuczkmUCtANQF2s23fqkA@mail.gmail.com>
 <CAEJMVkAT9u1mpY1NZyDox9KieBk+wFsWzPXDmVc5+epQVJmMdA@mail.gmail.com>
Message-ID: <CAFGRPVpy3SoqBrTY715pEOvuJ4arHv9iVvhe+iYUqKTapASDfg@mail.gmail.com>

looks like this was it, i had a very small jb configured
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337


On Wed, Jan 26, 2022 at 6:33 PM Brian West <brian at freeswitch.com> wrote:

> rtp_jitter_buffer_during_bridge=true, all the stuff in OPUS to process,
> manage and deal with FEC requires a jitter buffer to process it.
>
> /b
>
>
> On Wed, Jan 26, 2022 at 12:16 PM David Villasmil <
> david.villasmil.work at gmail.com> wrote:
>
>> Hello all,
>> Wondering if anyone's seen this scenario:
>>
>> With 15% packet loss, FEC enabled.
>>
>> - sip -> pstn:
>>   -- We're seeing FEC out and in
>>   * client (OPUS) --> FS --> (PCMU/A) B-leg - Result: Choppy Audio
>>   * client (OPUS) <-- FS <-- (PCMU/A) B-leg - Result: Very good audio
>>
>>   * client (OPUS) --> FS --> client (OPUS) - Result: Very good audio
>>   * client (OPUS) <-- FS <-- client (OPUS) - Result: Very good audio
>>
>> It's like FS is ignoring the incoming FEC when transcoding.
>> I have a small jitterbuffer 20:100:20
>>
>> Any ideas?
>>
>>
>> David Villasmil
>> email: david.villasmil.work at gmail.com
>> phone: +34669448337
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
>
>
> --
>
> Brian West | Co-founder and Developer
>
> Need Commercial support? email sales at freeswitch.com
>
> FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
> <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>
>
> Email: brian at freeswitch.com
>
> Mobile: 918-424-9378
>
> Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>
>
> [image: https://www.facebook.com/signalwireinc?src=email]
> <https://www.facebook.com/freeswitch> [image:
> https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220126/8d62876c/attachment-0001.html>

From brian at freeswitch.com  Thu Jan 27 12:37:27 2022
From: brian at freeswitch.com (Brian West)
Date: Thu, 27 Jan 2022 06:37:27 -0600
Subject: [Freeswitch-users] OPUS - is FS ignoring incoming FAC packets?
In-Reply-To: <CAFGRPVpy3SoqBrTY715pEOvuJ4arHv9iVvhe+iYUqKTapASDfg@mail.gmail.com>
References: <CAFGRPVoPMaZJYMC-PmyAWfUY-a1z9NuczkmUCtANQF2s23fqkA@mail.gmail.com>
 <CAEJMVkAT9u1mpY1NZyDox9KieBk+wFsWzPXDmVc5+epQVJmMdA@mail.gmail.com>
 <CAFGRPVpy3SoqBrTY715pEOvuJ4arHv9iVvhe+iYUqKTapASDfg@mail.gmail.com>
Message-ID: <CAEJMVkASBRdr18yfxoL6ZNPDaB2-qsJd1X6D0a5nscC-JyyJsA@mail.gmail.com>

If it's too small, it won't have enough data if a packet is lost in every
case depending on latency and jitter.

On Wed, Jan 26, 2022 at 3:17 PM David Villasmil <
david.villasmil.work at gmail.com> wrote:

> looks like this was it, i had a very small jb configured
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
>
>
> On Wed, Jan 26, 2022 at 6:33 PM Brian West <brian at freeswitch.com> wrote:
>
>> rtp_jitter_buffer_during_bridge=true, all the stuff in OPUS to process,
>> manage and deal with FEC requires a jitter buffer to process it.
>>
>> /b
>>
>>
>> On Wed, Jan 26, 2022 at 12:16 PM David Villasmil <
>> david.villasmil.work at gmail.com> wrote:
>>
>>> Hello all,
>>> Wondering if anyone's seen this scenario:
>>>
>>> With 15% packet loss, FEC enabled.
>>>
>>> - sip -> pstn:
>>>   -- We're seeing FEC out and in
>>>   * client (OPUS) --> FS --> (PCMU/A) B-leg - Result: Choppy Audio
>>>   * client (OPUS) <-- FS <-- (PCMU/A) B-leg - Result: Very good audio
>>>
>>>   * client (OPUS) --> FS --> client (OPUS) - Result: Very good audio
>>>   * client (OPUS) <-- FS <-- client (OPUS) - Result: Very good audio
>>>
>>> It's like FS is ignoring the incoming FEC when transcoding.
>>> I have a small jitterbuffer 20:100:20
>>>
>>> Any ideas?
>>>
>>>
>>> David Villasmil
>>> email: david.villasmil.work at gmail.com
>>> phone: +34669448337
>>> _________________________________________________________________________
>>>
>>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>>> services.
>>> Build your next product on our scalable cloud platform.
>>>
>>> Join our online community to chat in real time
>>> https://signalwire.community
>>>
>>> Professional FreeSWITCH Services
>>> sales at freeswitch.com
>>> https://freeswitch.com
>>>
>>> Official FreeSWITCH Sites
>>> https://freeswitch.com/oss
>>> https://freeswitch.org/confluence
>>> https://cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> https://freeswitch.com
>>
>>
>>
>> --
>>
>> Brian West | Co-founder and Developer
>>
>> Need Commercial support? email sales at freeswitch.com
>>
>> FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
>> <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>
>>
>> Email: brian at freeswitch.com
>>
>> Mobile: 918-424-9378
>>
>> Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>
>>
>> [image: https://www.facebook.com/signalwireinc?src=email]
>> <https://www.facebook.com/freeswitch> [image:
>> https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 

Brian West | Co-founder and Developer

Need Commercial support? email sales at freeswitch.com

FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
<https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>

Email: brian at freeswitch.com

Mobile: 918-424-9378

Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>

[image: https://www.facebook.com/signalwireinc?src=email]
<https://www.facebook.com/freeswitch> [image:
https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220127/ea21364e/attachment.html>

From avi at avimarcus.net  Thu Jan 27 13:30:46 2022
From: avi at avimarcus.net (Avi Marcus)
Date: Thu, 27 Jan 2022 13:30:46 +0000
Subject: [Freeswitch-users] Dialplan apps clarification transfer &
	execute_extension
In-Reply-To: <DU0PR02MB7900FCF54036D497E172024288209@DU0PR02MB7900.eurprd02.prod.outlook.com>
References: <DU0PR02MB7900FCF54036D497E172024288209@DU0PR02MB7900.eurprd02.prod.outlook.com>
Message-ID: <0100017e9bbb3cd2-61af2ab0-a0e2-4cee-bf4d-36f61c131562-000000@email.amazonses.com>

I thought that was only if auto_hunt was turned on
https://freeswitch.org/confluence/display/FREESWITCH/XML+Dialplan



-Avi Marcus



On Wed, Jan 26, 2022 at 6:39 PM Piccinin Francesco <
francesco.piccinin at insiel.it> wrote:

> Hi guys,
>
> I really  don't understand well mod_dptools: transfer.
>
>
>
> In the documentation I read:
>
>
>
> *"Immediately transfer the calling channel to a new context. If there
> happens to be an xml extension named <destination_number> then control is
> "warped" directly to that extension.  Otherwise it goes through the entire
> context checking for a match."*
>
>
>
> I have this instruction in my dialplan:
>
>
>
> <action application="transfer" data="extension_C XML calls"/>
>
>
>
> and a dialplan file like this:
>
>
>
> <include>
>
> <context name="calls">
>
>        <extension name="test_1" continue="true">
>
>             <condition>
>
>                   <action application="log" data="ERR ****** i'm in
> Test1"/>
>
>             </condition>
>
>        </extension>
>
>        <extension name="test_2" continue="true">
>
>             <condition>
>
>                   <action application="log" data="ERR ****** i'm in
> Test2"/>
>
>             </condition>
>
>        </extension>
>
>        <extension name="extension_C">
>
>             <condition>
>
>                   <action application="log" data="ERR ****** i'm in
> extension_C"/>
>
>             </condition>
>
>        </extension>
>
> </context>
>
> </include>
>
>
>
> isn't Freeswitch supposed to go stright to "extension_C"?
>
> in logs I can see that it executes all the extensions as they appears in
> the calls context.
>
> Maybe is there anything I’m missing?
>
>
>
> Thanks
>
> Regards
>
>
>
>
>
> *Francesco Piccinin*
>
> Telecomunicazioni
> Infrastrutture
>
>
> Insiel S.p.A.
>
> via San Francesco d'Assisi, 43
>
> 34133 - Trieste (TS) Italia
>
> tel +39 040 3737752
>
> mob +39 335 1329440
>
> francesco.piccinin at insiel.it
>
> www.insiel.it
>
>
>
> AVVISO DI RISERVATEZZA Informazioni riservate possono essere contenute nel
> messaggio o nei suoi allegati. Se non siete i destinatari indicati nel
> messaggio, o responsabili per la sua consegna alla persona, o se avete
> ricevuto il messaggio per errore, siete pregati di non trascriverlo,
> copiarlo o inviarlo ad alcuno. In tal caso vi invitiamo a cancellare il
> messaggio ed i suoi allegati. Grazie.
> CONFIDENTIALITY NOTICE Confidential information may be contained in this
> message or in its attachments. If you are not the addressee indicated in
> this message, or responsible for message delivering to that person, or if
> you have received this message in error, you may not transcribe, copy or
> deliver this message to anyone. In that case, you should delete this
> message and its attachments. Thank you.
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220127/807a8133/attachment-0001.html>

From lists at telefaks.de  Thu Jan 27 15:40:22 2022
From: lists at telefaks.de (Peter Steinbach)
Date: Thu, 27 Jan 2022 16:40:22 +0100
Subject: [Freeswitch-users] Delay Hangup on attended transfer
Message-ID: <34c84152-de92-5e6f-7946-dfadd8ad9a52@telefaks.de>

Hello,


we are integrating MS Teams into our FS environment, and we have some
problems with attended transfer

   - A calls B (Teams User)
   - B AttXfer to C (Teams)

Call leg ob B is stopped immediately on attXfer, and this makes it
difficult to handle the call in MS Teams, we would therefore like to
delay this hangup.


So is there any way to delay the hangup of leg B? I tried with
api_hangup_cause, but this happed after Freeswitch has been sent it's
BYE packet.


-- 
With kind regards
Peter Steinbach 

Telefaks Services GmbH
mailto:lists (att) telefaks.de
Internet: www.telefaks.de




From gregor at infomedia.si  Thu Jan 27 17:30:08 2022
From: gregor at infomedia.si (Gregor Nanger)
Date: Thu, 27 Jan 2022 18:30:08 +0100
Subject: [Freeswitch-users] Delay Hangup on attended transfer
In-Reply-To: <34c84152-de92-5e6f-7946-dfadd8ad9a52@telefaks.de>
References: <34c84152-de92-5e6f-7946-dfadd8ad9a52@telefaks.de>
Message-ID: <CAC7ttFF0EL=Up=wea3ZVx31a7ya1ngCRrAw_Eo4A8LA=7jKG_w@mail.gmail.com>

Just for info. How do you integrate MS teams with FS?

On Thu, 27 Jan 2022, 16:41 Peter Steinbach, <lists at telefaks.de> wrote:

> Hello,
>
>
> we are integrating MS Teams into our FS environment, and we have some
> problems with attended transfer
>
>    - A calls B (Teams User)
>    - B AttXfer to C (Teams)
>
> Call leg ob B is stopped immediately on attXfer, and this makes it
> difficult to handle the call in MS Teams, we would therefore like to
> delay this hangup.
>
>
> So is there any way to delay the hangup of leg B? I tried with
> api_hangup_cause, but this happed after Freeswitch has been sent it's
> BYE packet.
>
>
> --
> With kind regards
> Peter Steinbach
>
> Telefaks Services GmbH
> mailto:lists (att) telefaks.de
> Internet: www.telefaks.de
>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220127/a781d36c/attachment.html>

From rasheed.kalapurackal at gmail.com  Thu Jan 27 18:59:41 2022
From: rasheed.kalapurackal at gmail.com (Rasheed Kalapurackal)
Date: Fri, 28 Jan 2022 00:29:41 +0530
Subject: [Freeswitch-users] SRTP internal calls failing for Push registered
	softphones
Message-ID: <CAKU4o51xh3V10KUQGMM7pHM=wBt2w-_Sha-p2_hOybetxsaSCw@mail.gmail.com>

Hello All ,

I configured for SIP TLS + SRTP and i was trying to make calls between 2
registered softphones.  One phone is a bria android softphone and it is
push registered from the bria's push server (FSTest2 -4002)  .  The other
phone is a softphone running on windows desktop (FSTest1 - 4001)  .  In
this scenario it was noticed that the call from 4001 to 4002 is failing
because  , the call invite being sent to the push server does not have SRTP
in it.. So it return unsupported media and is failing.   Following are the
log files for this scenario.

https://pastebin.com/J2PkFVJa

If i keep the phone 4002 in the foreground of the mobile and hence it is
directly registered with freeswitch instead of a push registerd  , it is
noticed that the call is working fine and the call from 4001 to 4002 will
ring the bria softphone 4002 because  In this case the call INVITE being
sent from the SIP server/PBX to the bria softphone contains SRTP, Following
are the logs for this scenario.

https://pastebin.com/1849GVQk

Our freeswitch version
is 1.10.7-release+git~20211024T163933Z~883d2cb662~64bit  .  I am trying to
find a solution to this issue for last 2 days without any luck.  Any help
is highly appreciated.

Thanks and Regards
Abdul Rasheed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220128/abdf07aa/attachment.html>

From Antony.Stone at freeswitch.open.source.it  Thu Jan 27 20:46:43 2022
From: Antony.Stone at freeswitch.open.source.it (Antony Stone)
Date: Thu, 27 Jan 2022 21:46:43 +0100
Subject: [Freeswitch-users] Delay Hangup on attended transfer
In-Reply-To: <CAC7ttFF0EL=Up=wea3ZVx31a7ya1ngCRrAw_Eo4A8LA=7jKG_w@mail.gmail.com>
References: <34c84152-de92-5e6f-7946-dfadd8ad9a52@telefaks.de>
 <CAC7ttFF0EL=Up=wea3ZVx31a7ya1ngCRrAw_Eo4A8LA=7jKG_w@mail.gmail.com>
Message-ID: <202201272146.43889.Antony.Stone@freeswitch.open.source.it>

On Thursday 27 January 2022 at 18:30:08, Gregor Nanger wrote:

> Just for info. How do you integrate MS teams with FS?

I, too, would like to know more about this.

Antony.

> On Thu, 27 Jan 2022, 16:41 Peter Steinbach, <lists at telefaks.de> wrote:
> > Hello,
> > 
> > we are integrating MS Teams into our FS environment, and we have some
> > problems with attended transfer
> > 
> >    - A calls B (Teams User)
> >    - B AttXfer to C (Teams)
> > 
> > Call leg ob B is stopped immediately on attXfer, and this makes it
> > difficult to handle the call in MS Teams, we would therefore like to
> > delay this hangup.
> > 
> > 
> > So is there any way to delay the hangup of leg B? I tried with
> > api_hangup_cause, but this happed after Freeswitch has been sent it's
> > BYE packet.

-- 
Tinned food was developed for the British Navy in 1813.

The tin opener was not invented until 1858.

                                                   Please reply to the list;
                                                         please *don't* CC me.


From hyavari at rocketmail.com  Thu Jan 27 22:06:44 2022
From: hyavari at rocketmail.com (H Yavari)
Date: Thu, 27 Jan 2022 22:06:44 +0000 (UTC)
Subject: Conference call based on RFC-4579
References: <381031690.4715652.1643321204167.ref@mail.yahoo.com>
Message-ID: <381031690.4715652.1643321204167@mail.yahoo.com>

Hi to all, 
I am trying to use FS to handle a 3-way call conference with REFER. A calls B, then puts B on hold and then calls C, then puts C on hold too, and calls conference room. After that A sends REFER to FS for B and C to move them to conference room. FS handles first REFER and transfers B leg to conference room correctly, but unexpectedly FS sends a BYE to A party for conference call too and terminated A party from conference with this :Reason: SIP;cause=601;text="ATTENDED_TRANSFER"

 I put this config in conference: <param name="conference-flags" value ="rfc-4579"/>   but did not help and FS does not any 'isfocus' to OK contact header for A party.So is there any other config? or FS does not really handle Ad hoc conferencing based on RFC 4579.
Thanks for your help.

Regards,Hossein
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220127/8e65e5e9/attachment-0001.html>

From dujinfang at gmail.com  Fri Jan 28 00:36:18 2022
From: dujinfang at gmail.com (Seven Du)
Date: Fri, 28 Jan 2022 08:36:18 +0800
Subject: [Freeswitch-users] Dialplan apps clarification transfer &
	execute_extension
In-Reply-To: <0100017e9bbb3cd2-61af2ab0-a0e2-4cee-bf4d-36f61c131562-000000@email.amazonses.com>
References: <DU0PR02MB7900FCF54036D497E172024288209@DU0PR02MB7900.eurprd02.prod.outlook.com>
 <0100017e9bbb3cd2-61af2ab0-a0e2-4cee-bf4d-36f61c131562-000000@email.amazonses.com>
Message-ID: <CAJs+-5q=g7zgt0X7sMcX2wD5-UdF6nPPy_3RRnF3N2DraOot7Q@mail.gmail.com>

FreeSWITCH XML dialplan route by destination_number other than extension
name. check the default config for examples.

On Thu, Jan 27, 2022 at 9:38 PM Avi Marcus <avi at avimarcus.net> wrote:

> I thought that was only if auto_hunt was turned on
> https://freeswitch.org/confluence/display/FREESWITCH/XML+Dialplan
>
>
>
> -Avi Marcus
>
>
>
> On Wed, Jan 26, 2022 at 6:39 PM Piccinin Francesco <
> francesco.piccinin at insiel.it> wrote:
>
>> Hi guys,
>>
>> I really  don't understand well mod_dptools: transfer.
>>
>>
>>
>> In the documentation I read:
>>
>>
>>
>> *"Immediately transfer the calling channel to a new context. If there
>> happens to be an xml extension named <destination_number> then control is
>> "warped" directly to that extension.  Otherwise it goes through the entire
>> context checking for a match."*
>>
>>
>>
>> I have this instruction in my dialplan:
>>
>>
>>
>> <action application="transfer" data="extension_C XML calls"/>
>>
>>
>>
>> and a dialplan file like this:
>>
>>
>>
>> <include>
>>
>> <context name="calls">
>>
>>        <extension name="test_1" continue="true">
>>
>>             <condition>
>>
>>                   <action application="log" data="ERR ****** i'm in
>> Test1"/>
>>
>>             </condition>
>>
>>        </extension>
>>
>>        <extension name="test_2" continue="true">
>>
>>             <condition>
>>
>>                   <action application="log" data="ERR ****** i'm in
>> Test2"/>
>>
>>             </condition>
>>
>>        </extension>
>>
>>        <extension name="extension_C">
>>
>>             <condition>
>>
>>                   <action application="log" data="ERR ****** i'm in
>> extension_C"/>
>>
>>             </condition>
>>
>>        </extension>
>>
>> </context>
>>
>> </include>
>>
>>
>>
>> isn't Freeswitch supposed to go stright to "extension_C"?
>>
>> in logs I can see that it executes all the extensions as they appears in
>> the calls context.
>>
>> Maybe is there anything I’m missing?
>>
>>
>>
>> Thanks
>>
>> Regards
>>
>>
>>
>>
>>
>> *Francesco Piccinin*
>>
>> Telecomunicazioni
>> Infrastrutture
>>
>>
>> Insiel S.p.A.
>>
>> via San Francesco d'Assisi, 43
>>
>> 34133 - Trieste (TS) Italia
>>
>> tel +39 040 3737752
>>
>> mob +39 335 1329440
>>
>> francesco.piccinin at insiel.it
>>
>> www.insiel.it
>>
>>
>>
>> AVVISO DI RISERVATEZZA Informazioni riservate possono essere contenute
>> nel messaggio o nei suoi allegati. Se non siete i destinatari indicati nel
>> messaggio, o responsabili per la sua consegna alla persona, o se avete
>> ricevuto il messaggio per errore, siete pregati di non trascriverlo,
>> copiarlo o inviarlo ad alcuno. In tal caso vi invitiamo a cancellare il
>> messaggio ed i suoi allegati. Grazie.
>> CONFIDENTIALITY NOTICE Confidential information may be contained in this
>> message or in its attachments. If you are not the addressee indicated in
>> this message, or responsible for message delivering to that person, or if
>> you have received this message in error, you may not transcribe, copy or
>> deliver this message to anyone. In that case, you should delete this
>> message and its attachments. Thank you.
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 
About: http://about.me/dujinfang
Blog: http://www.dujinfang.com
Proj:  http://www.freeswitch.org.cn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220128/06623e8c/attachment.html>

From gregor at infomedia.si  Fri Jan 28 21:52:00 2022
From: gregor at infomedia.si (Gregor Nanger)
Date: Fri, 28 Jan 2022 22:52:00 +0100
Subject: [Freeswitch-users] expand-vars-in-tag-body
Message-ID: <CAC7ttFGmubgKFqn4L51aqVPnotoKgRnX0k9L0th3h5T_XngWjg@mail.gmail.com>

Hi!

I am fiddling with mod_httapi.

Does anyone know what is difference between:

<permission name="expand-vars-in-tag-body" value="true">
<permission name="expand-vars" value="true">

New FS installation doesn't have expand-vars anymore in config file.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220128/3d5aa79a/attachment.html>

From s.safarov at gmail.com  Sat Jan 29 15:15:35 2022
From: s.safarov at gmail.com (Sergey Safarov)
Date: Sat, 29 Jan 2022 18:15:35 +0300
Subject: [Freeswitch-users] Conference call based on RFC-4579
In-Reply-To: <mailman.5014.1643321232.1264.freeswitch-users@lists.freeswitch.org>
References: <381031690.4715652.1643321204167.ref@mail.yahoo.com>
 <mailman.5014.1643321232.1264.freeswitch-users@lists.freeswitch.org>
Message-ID: <CAHtxdDfdeyUo6FUsDd7t6YVyOvNN1Q_kRzwT=hxMc6EU5g9umQ@mail.gmail.com>

RFC-4579 is not fully implemented in FreeSwitch.
Feature you a looking is not present in FreeSwitch.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220129/b7fa3d11/attachment.html>

From hyavari at rocketmail.com  Sat Jan 29 19:49:38 2022
From: hyavari at rocketmail.com (H Yavari)
Date: Sat, 29 Jan 2022 19:49:38 +0000 (UTC)
Subject: [Freeswitch-users] Conference call based on RFC-4579
In-Reply-To: <CAHtxdDfdeyUo6FUsDd7t6YVyOvNN1Q_kRzwT=hxMc6EU5g9umQ@mail.gmail.com>
References: <381031690.4715652.1643321204167.ref@mail.yahoo.com>
 <mailman.5014.1643321232.1264.freeswitch-users@lists.freeswitch.org>
 <CAHtxdDfdeyUo6FUsDd7t6YVyOvNN1Q_kRzwT=hxMc6EU5g9umQ@mail.gmail.com>
Message-ID: <6669607.5609046.1643485778758@mail.yahoo.com>

 Hi Sergey,
Thanks. You think we can add this feature or it is complicated based on the current architecture of FS.
BR
    On Saturday, January 29, 2022, 07:15:59 AM PST, Sergey Safarov <s.safarov at gmail.com> wrote:  
 
 RFC-4579 is not fully implemented in FreeSwitch.
Feature you a looking is not present in FreeSwitch.  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220129/74c2f98b/attachment.html>

From s.safarov at gmail.com  Sun Jan 30 20:04:35 2022
From: s.safarov at gmail.com (Sergey Safarov)
Date: Sun, 30 Jan 2022 23:04:35 +0300
Subject: [Freeswitch-users] Conference call based on RFC-4579
In-Reply-To: <6669607.5609046.1643485778758@mail.yahoo.com>
References: <381031690.4715652.1643321204167.ref@mail.yahoo.com>
 <mailman.5014.1643321232.1264.freeswitch-users@lists.freeswitch.org>
 <CAHtxdDfdeyUo6FUsDd7t6YVyOvNN1Q_kRzwT=hxMc6EU5g9umQ@mail.gmail.com>
 <6669607.5609046.1643485778758@mail.yahoo.com>
Message-ID: <CAHtxdDdpHK8FV6GYTBu6jV292F6FSr8FY4i4Q9M5jzLidngX8Q@mail.gmail.com>

I do not have the skills to add such a feature into FreeSwitch and cannot
answer your question.

On Sat, Jan 29, 2022 at 10:49 PM H Yavari <hyavari at rocketmail.com> wrote:

> Hi Sergey,
>
> Thanks. You think we can add this feature or it is complicated based on
> the current architecture of FS.
>
> BR
>
> On Saturday, January 29, 2022, 07:15:59 AM PST, Sergey Safarov <
> s.safarov at gmail.com> wrote:
>
>
> RFC-4579 is not fully implemented in FreeSwitch.
> Feature you a looking is not present in FreeSwitch.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220130/3cd45e08/attachment.html>

From david.villasmil.work at gmail.com  Mon Jan 31 15:28:35 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Mon, 31 Jan 2022 15:28:35 +0000
Subject: [Freeswitch-users] ReINVITE with codec change
Message-ID: <CAFGRPVqxBgAigASL8ZLhhexnWaZVv49BxuJE_3N9zwB60hcgOQ@mail.gmail.com>

Hello All,

I’m testing a client and would like to test if it supports reINVITEs to
change codecs… any suggestions on how to test that?

Thanks all
-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220131/c7a0cd6a/attachment.html>

From Antony.Stone at freeswitch.open.source.it  Mon Jan 31 15:43:21 2022
From: Antony.Stone at freeswitch.open.source.it (Antony Stone)
Date: Mon, 31 Jan 2022 16:43:21 +0100
Subject: [Freeswitch-users] ReINVITE with codec change
In-Reply-To: <CAFGRPVqxBgAigASL8ZLhhexnWaZVv49BxuJE_3N9zwB60hcgOQ@mail.gmail.com>
References: <CAFGRPVqxBgAigASL8ZLhhexnWaZVv49BxuJE_3N9zwB60hcgOQ@mail.gmail.com>
Message-ID: <202201311643.21271.Antony.Stone@freeswitch.open.source.it>

On Monday 31 January 2022 at 16:28:35, David Villasmil wrote:

> Hello All,
> 
> I’m testing a client and would like to test if it supports reINVITEs to
> change codecs… any suggestions on how to test that?

Make a call from a phone configured only with Codec X, perform a transfer to 
another phone configured not to use Codec X?

Antony.

-- 
Normal people think "If it ain't broke, don't fix it".
Engineers think "If it ain't broke, it doesn't have enough features yet".

                                                   Please reply to the list;
                                                         please *don't* CC me.


From david.villasmil.work at gmail.com  Mon Jan 31 21:48:12 2022
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Mon, 31 Jan 2022 21:48:12 +0000
Subject: [Freeswitch-users] transfer_on_fail and continue_on_fail
Message-ID: <CAFGRPVp99Jd=V6+8tKpK8M1mowZLeYJPnn_TsS4RvqVowd-f5Q@mail.gmail.com>

Hello guys,

I want to use transfer_on_fail to transfer the leg to another extension, i
do this by setting the failure_causes and continue_on_fail to false
(because of
https://github.com/signalwire/freeswitch/blob/master/src/switch_channel.c#L4972
it will not work if set to true).

that works, but i ALSO want to use continue_on_fail, how can i do this? i
only want to be transferred if cause is busy.

Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20220131/985ee233/attachment.html>