[Freeswitch-users] No input audio with FSClient

[Paul Mateer]

Sorry. Just re-rest my last email and realised there was a typo – it should have read “I know that the problem is NOT at the server end of things”

Sorry about that.

Paul

Sent from my Windows 10 phone

From: Paul Mateer<mailto:paul.mateer at outlook.com>
Sent: 09 January 2017 18:16
To: Mitch Capper<mailto:mitch.capper at gmail.com>; FreeSWITCH Users Help<mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] No input audio with FSClient

Hi Mitch. Thanks for getting back so quickly.

I have the both the Main Input and Speakerphone Input set to “Microphone (High Definition Audio Device)” in the Sofia Settings, although switching them to the alternative (Primary Sound Capture Driver) makes no difference.

I know that the problem is at the server end of things because when I monitor communications between the client and the server I don't see any outgoing RTP packet traffic after the INVITE request is accepted by the server even though FSClient indicates the call has been answered.

I didn't know that you could use fs_cli to configure logging in FreeSWITCH that is embedded in FSClient – presumably you need to specify particular values for some of the parameters to do that?

Sent from my Windows 10 phone

From: Mitch Capper<mailto:mitch.capper at gmail.com>
Sent: 09 January 2017 17:11
To: FreeSWITCH Users Help<mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] No input audio with FSClient

Hi Paul,
One place to start would be to record the call with FSClient and Freeswitch itself see if the audio is on the client but not FS.  Enabling logging on the client/server using fs_cli and see anything interesting there.  Finally make sure you have the right mic input selected in the FSClient options.




~mitch

On Mon, Jan 9, 2017 at 8:58 AM, Paul Mateer <paul.mateer at outlook.com<mailto:paul.mateer at outlook.com>> wrote:
I seem to have a problem with audio input when using FSClient.

I have one box running FreeSWITCH and another running FSClient. I can call the server no problem and get audio back (I dialled 9198 to get the Tetris tune) but when I provide an audio stream using the mic and dial 9196 I get nothing back.

I know the mic is providing sound and the FreeSWITCH server is operating OK because I can use X-Lite to perform the same test and I get the audio feed played back to me.

I'm not sure if there is something amiss in the configuration of FSClient (although it should be the default config) or if something else is amiss (there doesn't appear to be anything odd in the FreeSWITCH log for the client).

Does anyone have any thoughts on what might be wrong, or what i should look at?

Thanks,

Paul

Sent from my Windows 10 phone


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org<mailto:consulting at freeswitch.org>
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20170109/7881e6e1/attachment.html