[Freeswitch-users] Best Way To Chat / Presence / File Xfer

[Vladyslav Zakhozhai]

Many things depend on client capabilities. I.e. jitsi may act as SIP cleint
and XMPP client. Linphone can act as SIP client (including SIP SIMPLE), etc.

In the first example we can setup separate XMPP server and configure client
app.

But there is some draft -
https://tools.ietf.org/html/draft-ietf-mmusic-file-transfer-mech-11 (sorry
for maybe obsoleted doc, I beleive there is more fresh standard). Kamailio
supports MSRP for example. And I think that it can be solution of this
issue.

>From the other side Kamailio can act as XMPP gateway also.  In this use
case there is SIP proxy and XMPP server still separate. But one entry point
for client app.

Sorry for mess of thoughts.  I'm investigating this topic too.

2016-11-25 16:54 GMT+02:00 Shaun Stokes <shaun.stokes at itec-support.co.uk>:

> This is something we’ve also been looking into.
>
>
>
> I believe the FreeSWITCH Verto module can support these features over
> WebRTC and it looks very promising but you would need to develop the client
> app or web page to facilitate this, you’re best bet would be to chat with
> FreeSWITCH Solutions.
>
>
>
> We have some fairly tight deadlines so we’re planning to re-visit Verto at
> a later date, for the time being we intend to use the Jitsi softphone
> client (javascript based) with a combination of SIP (FreeSWITCH) and XMPP
> you might be able to package this into a phone app.
>
>
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Adrian
> Thompson
> *Sent:* 24 November 2016 16:07
> *To:* freeswitch-users at lists.freeswitch.org
> *Subject:* [Freeswitch-users] Best Way To Chat / Presence / File Xfer
>
>
>
>
>
> Hello,
>
>
>
> Been a user and fan of Freeswitch for two years now – thank you for the
> great software!
>
> I’ve done days of research and would like to reach out to see if anyone
> else has some ideas here:
>
> We are looking into giving all of our techs a softphone for their mobile
> device so they can communicate back to base and to each other while out in
> the field.  Our desired features are as follows:
>
> -          Video (for troubleshooting equipment with other remote techs)
>
> -          Chat (for quick updates)
>
> -          Group Chat (for group reminders)
>
> -          Page (reach out to a busy individual with an important message)
>
> -          Group Page (reach out to a busy group of workers with an
> important message)
>
> -          File Transfer (send each other marketing material and tech
> manuals on the fly)
>
> -          Presence (so employees can let everyone else know if they are
> available)
>
>
>
> Video – Check, Working
>
> Chat – Check, SIMPLE, Working
>
> Group Chat – Not an option with SIMPLE?, Not working
>
> Page – Check, Working
>
> Group Page – Check, Working
>
> File Transfer – Not an option with SIMPLE?, Not working
>
> Presence – I have BLF working great, but what about extended presence such
> as ‘busy’ or ‘I’m a leprechaun’
>
>
>
> Do I have to start using XMPP for these things?  It could complicate the
> setup three-fold if I have to go that route and I would rather not….  But
> if I have to, is there documents supporting a configuration that includes
> Freeswitch for voice/video and XMPP for everything else?
>
>
>
> Also, does anyone have a suggestion for a mobile softphone with video,
> chat, file xfer and can be provisioned server side? (I’ve tried the
> Grandstream Wave, but it cannot use an HTTPS server with authentication for
> some reason so I’m looking for more options)
>
>
>
> Thanks in advance for advice!
>
> Adrian
>
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
> Shaun Stokes - Infrastructure Analyst
> T : 01453 700713
> E : shaun.stokes at itec-support.co.uk
> W : www.itec-support.co.uk
> Registered Address :- ITEC Support, Suite 2 Prospect House, Bath Road,
> Stroud, Gloucestershire GL5 3QF
> Company No. 06908001
>
> CONFIDENTIALITY NOTICE
> This communication and the information it contains are intended for the
> person or organisation to which it is addressed. Its contents are
> confidential and may be protected in law. Unauthorised use, copying or
> disclosure of any of it may be unlawful. If you are not the intended
> recipient, please contact us immediately.
> The contents of any attachments in this e-mail may contain software
> viruses, which could damage your own computer system. While ITEC Support
> has taken every reasonable precaution to minimise this risk, we cannot
> accept liability for any damage which you sustain as a result of software
> viruses. You should carry out your own virus checking procedure before
> opening any attachment.
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>



-- 
С уважением,
Владислав Захожай
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20161125/c0b9f239/attachment-0001.html