[Freeswitch-users] How to receive incoming calls from Huawei dongle and mod_gsmopen?

Tue May 17 00:39:55 MSD 2016

Yes, this is clear to me, it is just that I do now know where to find which
COM ports dongle use :-(( Can I see it in device manager?

2016-05-16 22:29 GMT+02:00 Giovanni Maruzzelli <gmaruzz at gmail.com>:

>
>
> On Mon, May 16, 2016 at 10:07 PM, Gregor Nanger <gregor at infomedia.si>
> wrote:
>
>> Yes, you have to compile it first, because it is not compiled with
>> freeswitch build, then you need to load it. It is in confluence.
>>
>> Giovanni, can you tell me how can I find out which COM ports dongle uses?
>>
>
> As you can see in config file (
> freeswitch.git\src\mod\endpoints\mod_gsmopen\configs\gsmopen.conf.xml ),
> you *MUST* set which COM port to use, eg:
>
> ===========
>  <per_interface_settings>
>     <interface id="1" name="gsm01">
>       <param name="controldevice_name" value="/dev/ttyUSB3"/>
>       <param name="controldevice_audio_name" value="/dev/ttyUSB2"/>
>     <!-- in windowz would be, eg: -->
>       <!--
>       <param name="controldevice_name" value="COM4"/>
>       -->
>       <!-- 3G PC UI Interface is controldevice_name -->
>       <!--
>       <param name="controldevice_audio_name" value="COM2"/>
>       -->
>       <!-- 3G Application Interface is controldevice_audio_name -->
>     </interface>
>     <!-- following interfaces are commented out!
>     -->
>   </per_interface_settings>
>
> ===========
>
>
>
>>
>> 2016-05-16 21:48 GMT+02:00 Giovanni Maruzzelli <gmaruzz at gmail.com>:
>>
>>> Have you compiled and loaded the module?
>>>
>>> Do you have any trace of its presence in freeswitch console?
>>>
>>> Also, if you are not an expert I would definitely counseil you not to
>>> try uncharted things like gsmopen on won with fusionpbx. It's just too
>>> complex. Do it after you master both fusionpbx and FreeSWITCH.
>>>
>>> My two cents :)
>>> -giovanni
>>>
>>> sent from mobile
>>> cell: +39 347 266 56 18
>>> Giovanni Maruzzelli
>>> OpenTelecom.IT
>>> Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel at cefet.net> ha scritto:
>>>
>>>> Hi,
>>>>
>>>> I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen.
>>>> I'm using the 32bit version in Windows 7, compiled from current source
>>>> (version 1.7) in Visual Studio 2015 Community.
>>>>
>>>> My Huawei dongle is E1756, unlocked and with voice calls enabled.
>>>>
>>>> Currently I am able to call my IVR menu directly by dialing from my
>>>> softphone and I am also able to originate outbound calls after adding a
>>>> rule using FusionPbx Dialplan Manager.
>>>>
>>>> However if I try to call the dongle it keeps ringing, not being
>>>> answered and no log is displayed in console. My gsmopen.conf.xml file has
>>>> the following lines:
>>>>
>>>> <param name="context" value="public"/>
>>>> <param name="destination" value="incoming_gsm_call"/>
>>>>
>>>> And I've set a new dialplan in fusionpbx rule with:
>>>>
>>>> condition > context > public
>>>> condition > destination_number > incoming_gsm_call
>>>> action > transfer > 500 XML default (500 being the main IVR menu
>>>> extension)
>>>>
>>>> Am I missing something to get this working or maybe there is some
>>>> setting wrong with my dongle?
>>>>
>>>>
>>>> Thanks!
>>>>
>>>>
>>>> _________________________________________________________________________
>>>> Professional FreeSWITCH Consulting Services:
>>>> consulting at freeswitch.org
>>>> http://www.freeswitchsolutions.com
>>>>
>>>> Official FreeSWITCH Sites
>>>> http://www.freeswitch.org
>>>> http://confluence.freeswitch.org
>>>> http://www.cluecon.com
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://confluence.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>>
>>
>> --
>> Gregor Nanger
>>
>> *CTO*
>> t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
>> • Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
>> • www.infomedia.si
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
>
> --
> Sincerely,
>
> Giovanni Maruzzelli
> Cell : +39-347-2665618
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>

-- 
Gregor Nanger

*CTO*
t./f.: 00386 (0) 7 6000 308/309 • m:. 00386 (0)41 756485
• Infomedia d.o.o. • Jerebova 3, Novo mesto, Slovenia
• www.infomedia.si
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160516/0bdb4e37/attachment.html 