[Freeswitch-users] Ringing don't exist

[amani mansour]

Can anyone assist me please ? Thank you.

2016-03-30 8:02 GMT+01:00 amani mansour <amani.mansour2 at gmail.com>:

> Good morning Mr Ahmed ,
> Thank you sir , i modifie  the ring back but no change in the tcpdumps
>
> but I think (probably sure) that the problem is in the bridge : i don't
> know what i must set in data = user/ ... or sofia/gateway/...
> remarque that the extension 600 is registred when i added an external
> gateway like this :
> sip-sofia/external
> <include>
>   <gateway name="gateway_to_600.xml">
>     <param name="proxy" value="192.168.3.5"/>
>     <param name="username" value="600"/>
>     <param name="password" value="$${default_password}"/>
>     <param name="register" value="true"/>
>   </gateway>
> </include>
>
>
>
> 2016-03-30 6:44 GMT+01:00 Ahmed habiba <ahabiba at gmail.com>:
>
>> Hi,
>>
>> the configuration you did will not generate any 180/183, as per your
>> configuration you answer immediately once you get invite, if you are trying
>> something like ring-back-tone you can try the below, this will allow some
>> music to play while the other phone is ringing
>>
>> <action application="set" data="ringback=[data]"/>
>>
>>
>>
>>
>>
>> Thanks,
>>
>> Ahmed Habiba.
>>
>> *From: *amani mansour <amani.mansour2 at gmail.com>
>> *Subject: **Re: [Freeswitch-users] Ringing don't exist*
>> *Date: *March 30, 2016 at 12:12:43 AM GMT+3
>> *To: *FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> *Reply-To: *FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>>
>>
>> Hi Mr Bote the problem is not in the number look when i do in fs_cli :
>> sofia status internal reg ==> i have 2 numbers registred : 1000 and 1011
>> but only 1000 is configured by softphone
>> 1011  : i did it using external gateway
>> when i dial 1011 from the softphene where registred the number 1000 ,, so
>> the number 1000 is registred in the FS NOT IN THE SOFT PHONE  and now i
>> want to call the number 1000 only when it ring (180) or the method progress
>> sesiion arrive i listen a short music example titris music now i receive
>> the all methodes done well also i listen the music but i dont receive the
>> method nor 180 nor 183
>>
>> can you help me please
>>
>>
>> with regards
>> amani
>>
>> 2016-03-29 21:56 GMT+01:00 Bote Man <bote_radio at botecomm.com>:
>>
>>> Any device or soft phone that you want to register to FS should have its
>>> own entry in conf/directory/default/*.xml
>>> This contains its authentication ID and password to register it to
>>> FreeSWITCH.
>>>
>>> Then you need an entry in conf/dialplan/default.xml or other dialplan
>>> that tells FS how to route that number.
>>>
>>> The Vanilla configuration files available for FS come with directory
>>> files for users 1000.xml through 1019.xml and a default dialplan entry that
>>> calls 1000-1019. So it will not know how to route 600 nor 423 until you add
>>> routes for those numbers in the dialplan.
>>>
>>> Or you could change 423 to 1001 and enter its credentials into 1001.xml
>>> and it should call both directions.
>>>
>>>
>>> ---
>>> Bote
>>> FreeSWITCH Docs Janitor
>>> http://freeswitch.org/confluence
>>>
>>>
>>>
>>>
>>> *From:* amani mansour
>>> *Sent:* Tuesday, 29 March, 2016 16:04
>>> *Subject:* Re: [Freeswitch-users] Ringing don't exist
>>>
>>> Mr i have :
>>> 1 FS A(virtual machine
>>> 1)--------------------------------------------->in my conputer i installed
>>> a soft phone ( number 1000 is regestred from the soft phone )
>>>
>>> i did a gateway which permet to register another number 423 in
>>> freeswitch A
>>>
>>> so now i have 2 numbers registred in FS  but only one is regestred by
>>> the soft phone
>>>
>>>
>>> i want to dial 423 from the soft phone 1000 normally the call will be
>>> done normally ) but i don't have the methode ring
>>>
>>> i wish that i have well describe the problem t
>>>
>>> thank you sir ,i wish you can help me
>>>
>>>
>>>
>>> best regards
>>> amani
>>>
>>> 2016-03-29 17:58 GMT+01:00 Michael Jerris <mike at jerris.com>:
>>> What device is not sending the 180?  why is it not sending it?
>>>
>>>
>>> On Mar 29, 2016, at 12:19 PM, amani mansour <amani.mansour2 at gmail.com>
>>> wrote:
>>>
>>> yes i know mr Brian ,in fact i asked why ?
>>>
>>> 2016-03-29 17:14 GMT+01:00 Brian West <brian at freeswitch.org>:
>>> There is no 180/183 in there, just a 200OK
>>>
>>> /b
>>>
>>>
>>> On Tue, Mar 29, 2016 at 10:59 AM, amani mansour <
>>> amani.mansour2 at gmail.com> wrote:
>>>
>>> Hi,
>>> I need to make a call from my soft phone  to another freeswitch ,when
>>> the call is established (i meant (INVITE ,OK , RINGING or Progress.dession
>>> .)  and after the ring is done to the freeswitch i will listen for example
>>> a song ,for that i make an external gateway  ,but the step "ringing or
>>> progress session " is not estableshed
>>>
>>>
>>> i need to call the extension 600
>>> <extension 600.PNG>
>>> <tcpdump.PNG>
>>> ​
>>>
>>> thanks
>>> with regards
>>> amani
>>>
>>>
>>>
>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://confluence.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160330/8545b4d1/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PastedGraphic-1.tiff
Type: image/tiff
Size: 32050 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160330/8545b4d1/attachment-0001.tiff