[Freeswitch-users] Group Call
Shawn Wheeler
Shawn.Wheeler at interlockconcepts.com
Sat Aug 6 03:02:51 MSD 2016
Please forgive my ignorance.
I do not know what sps limit is.
I did notice that the device that are not working are on different switches than the ones that do.
Does the Mad Boss group call us a different protocol than the direct dial call?
From: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Michael Jerris
Sent: Friday, August 5, 2016 12:00 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] Group Call
See if it does the same thing if not using the user endpoint. Try raising the sps limit.
Sent from my iPad
On Aug 5, 2016, at 1:27 PM, Shawn Wheeler <Shawn.Wheeler at interlockconcepts.com<mailto:Shawn.Wheeler at interlockconcepts.com>> wrote:
Thank you for responding.
This is a bit long but I find more information is better than less when trouble shooting.
I started over this morning.
I began with 13 devices. All with the following extension. 4001 through 4013 (as shown below)
The 13 devices all connected.
<user id="4001" type="pointer"/>
<user id="4002" type="pointer"/>
<user id="4003" type="pointer"/>
<user id="4004" type="pointer"/>
<user id="4005" type="pointer"/>
<user id="4006" type="pointer"/>
<user id="4007" type="pointer"/>
<user id="4008" type="pointer"/>
<user id="4009" type="pointer"/>
<user id="4010" type="pointer"/>
<user id="4011" type="pointer"/>
<user id="4012" type="pointer"/>
<user id="4013" type="pointer"/>
Next I added another 10 devices (see below). This gave me a total of 23 devices. Of the 23, only the first 13 and the last extension “1201” connected.
<user id="1001" type="pointer"/>
<user id="1002" type="pointer"/>
<user id="1003" type="pointer"/>
<user id="1004" type="pointer"/>
<user id="1101" type="pointer"/>
<user id="1102" type="pointer"/>
<user id="1103" type="pointer"/>
<user id="1104" type="pointer"/>
<user id="1105" type="pointer"/>
<user id="1201" type="pointer"/>
Next I removed 7 extensions. Leaving only the first 13 plus ext. 1001, ext. 1002 which were not working and ext. 1201 which is working.
When I make the call, the first 13 will connect, as does ext. 1201. However, ext. 1001 and ext. 1002 show the user not registered.
Looking at each device, both show registered one the device and in FreeSWITCH. I can also make direct calls to each device independently.
eaab8efe-e4eb-4470-bb12-c6e603905685 EXECUTE sofia/internal/9005 at 10.111.72.3<mailto:sofia/internal/9005 at 10.111.72.3> conference_set_auto_outcall([^^:sip_invite_domain=192.168.40.55:presence_id=4001 at 192.168.40.55<mailto:presence_id=4001 at 192.168.40.55>]sofia/internal/sip:4001 at 10.111.72.11<mailto:4001 at 10.111.72.11>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4002 at 192.168.40.55<mailto:presence_id=4002 at 192.168.40.55>]sofia/internal/sip:4002 at 10.111.72.12<mailto:4002 at 10.111.72.12>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4003 at 192.168.40.55<mailto:presence_id=4003 at 192.168.40.55>]sofia/internal/sip:4003 at 10.111.72.13<mailto:4003 at 10.111.72.13>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4004 at 192.168.40.55<mailto:presence_id=4004 at 192.168.40.55>]sofia/internal/sip:4004 at 10.111.72.14<mailto:4004 at 10.111.72.14>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4005 at 192.168.40.55<mailto:presence_id=4005 at 192.168.40.55>]sofia/internal/sip:4005 at 10.111.72.15<mailto:4005 at 10.111.72.15>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4006 at 192.168.40.55<mailto:presence_id=4006 at 192.168.40.55>]sofia/internal/sip:4006 at 10.111.72.16<mailto:4006 at 10.111.72.16>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4007 at 192.168.40.55<mailto:presence_id=4007 at 192.168.40.55>]sofia/internal/sip:4007 at 10.111.72.17<mailto:4007 at 10.111.72.17>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4008 at 192.168.40.55<mailto:presence_id=4008 at 192.168.40.55>]sofia/internal/sip:4008 at 10.111.72.18<mailto:4008 at 10.111.72.18>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4009 at 192.168.40.55<mailto:presence_id=4009 at 192.168.40.55>]sofia/internal/sip:4009 at 10.111.72.19<mailto:4009 at 10.111.72.19>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4010 at 192.168.40.55<mailto:presence_id=4010 at 192.168.40.55>]sofia/internal/sip:4010 at 10.111.72.20<mailto:4010 at 10.111.72.20>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4011 at 192.168.40.55<mailto:presence_id=4011 at 192.168.40.55>]sofia/internal/sip:4011 at 10.111.72.21<mailto:4011 at 10.111.72.21>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4012 at 192.168.40.55<mailto:presence_id=4012 at 192.168.40.55>]sofia/internal/sip:4012 at 10.111.72.22<mailto:4012 at 10.111.72.22>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=4013 at 192.168.40.55<mailto:presence_id=4013 at 192.168.40.55>]sofia/internal/sip:4013 at 10.111.72.23<mailto:4013 at 10.111.72.23>:5060,,
[^^:sip_invite_domain=192.168.40.55:presence_id=1001 at 192.168.40.55<mailto:presence_id=1001 at 192.168.40.55>]error/user_not_registered,,
[^^:sip_invite_domain=192.168.40.55:presence_id=1002 at 192.168.40.55<mailto:presence_id=1002 at 192.168.40.55>]error/user_not_registered,,
[^^:sip_invite_domain=192.168.40.55:presence_id=1201 at 192.168.40.55<mailto:presence_id=1201 at 192.168.40.55>]sofia/internal/sip:1201 at 10.111.72.40<mailto:1201 at 10.111.72.40>:5060)
This is the syntax I am using with the group call as well.
<group name="060">
<users>
<user id="4001" type="pointer"/>
<user id="4002" type="pointer"/>
<user id="4003" type="pointer"/>
<user id="4004" type="pointer"/>
<user id="4005" type="pointer"/>
<user id="4006" type="pointer"/>
<user id="4007" type="pointer"/>
<user id="4008" type="pointer"/>
<user id="4009" type="pointer"/>
<user id="4010" type="pointer"/>
<user id="4011" type="pointer"/>
<user id="4012" type="pointer"/>
<user id="4013" type="pointer"/>
</users>
</group>
Would very much applicate some insight.
Thank you in advance.
Shawn
From: freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Michael Jerris
Sent: Friday, August 5, 2016 12:49 AM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Subject: Re: [Freeswitch-users] Group Call
you'll have to look at the logs to see why the calls failed. How many are you calling at once and how many are failing?
On Friday, August 5, 2016, Shawn Wheeler <Shawn.Wheeler at interlockconcepts.com<mailto:Shawn.Wheeler at interlockconcepts.com>> wrote:
I have an odd situation.
I am using the mad boss group call. The phones are set to auto answer. When I make the call, some phone will connect but others will not. However, I can call each phone individually and the phone will answer.
Thoughts?
Thank you in advance
Shawn
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org<mailto:consulting at freeswitch.org>
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<http://lists.freeswitch.org/mailman/options/freeswitch-users>
http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160805/63a8a3b7/attachment-0001.html
Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users
mailing list