[Freeswitch-users] Recommendations for a 'demo' PBX setup?

[Michael Collins]

If analog is an absolute must there are small ATA's that can be used. For
example, there's a Cisco SPA232D and its older cousin, the SPA3102. You
might try eBay to see if you can find something inexpensive.
-MSC

On Fri, Apr 22, 2016 at 1:28 PM, Luis Daniel Lucio Quiroz <
luis.daniel.lucio at gmail.com> wrote:

> Look for voptech IP phones, they are really cheap and zero problems
>
> Such user fxo/fxs, get any did over sip. Depending the country you are, it
> could be cents out 10 usd
> Le 22 avr. 2016 4:17 PM, "Piotr Starzyk" <pstarzyk at general-devices.com> a
> écrit :
>
>> I’m really liking FreeSWITCH so far, and am seriously considering
>> replacing our current Toshiba Strata system, with a FreeSWITCH
>> implementation.  To that end, I’m trying to put together a ‘proof of
>> concept’ system to demo to my supervisor.  I’ve done a bit of googling, but
>> couldn’t find a satisfactory answer.
>>
>>
>>
>> I basically plan on purchasing two SIP phones, and connecting them via
>> FreeSWITCH to an analog phone line.  I will then demonstrate different
>> features, like Voicemail, IVR, Presence, Conferencing (basically a lot of
>> what FreeSWITCH demo dialplan has to offer).
>>
>>
>>
>> My question is, what are some relatively cheap components that are
>> compatible with FreeSWITCH?  From my online searches, it looks like Sangoma
>> is the right choice, but the prices on their FXS/FXO cards start at a
>> couple hundred dollars, and while it would be fine for final install, I
>> can’t justify that for a ‘proof of concept’ setup.  I’m hoping to spend
>> less than $100 per each component below (so about $400 total).  The less
>> the better, but it should obviously be usable.
>>
>>
>>
>> What I’d like is recommendations for the following, FreeSWITCH compatible
>> hardware:
>>
>> -          2 SIP Phones
>>
>> -          FXS/FXO card (PCI or USB, or gateway or whatever is most
>> economical)
>>
>> -          Linux (or Windows) PC capable of running FreeSWITCH and
>> interfacing with the above card
>>
>>
>>
>> I’d appreciate any suggestions.  Thanks.
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160422/b0f9ef48/attachment-0001.html