[Freeswitch-users] Automatic transcoding does not seem to occur.

[doancea]

Hi Michael,

Is your Opus codec loaded ?
Do you see these in FS log ?

2015-09-16 11:27:00.235630 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 40ms (VBR)
2015-09-16 11:27:00.235644 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 40ms (VBR)
2015-09-16 11:27:00.235651 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 120ms (VBR)
2015-09-16 11:27:00.235658 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 100ms (VBR)
2015-09-16 11:27:00.235663 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 80ms (VBR)
2015-09-16 11:27:00.235669 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 60ms (VBR)
2015-09-16 11:27:00.235675 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 20ms (VBR)
2015-09-16 11:27:00.235680 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 20ms (VBR)
2015-09-16 11:27:00.235685 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 10ms (VBR)
2015-09-16 11:27:00.235690 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 8000hz 10ms (VBR)
2015-09-16 11:27:00.235696 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 48000hz 40ms (VBR)
2015-09-16 11:27:00.235701 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 48000hz 20ms (VBR)
2015-09-16 11:27:00.235707 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 48000hz 20ms (VBR)
2015-09-16 11:27:00.235712 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 48000hz 10ms (VBR)
2015-09-16 11:27:00.235717 [NOTICE] switch_loadable_module.c:213 Adding 
Codec opus 116 OPUS (STANDARD) 48000hz 10ms (VBR)

Any errors in your log  ?
Are u sure you bridge the call to the g.711 trunk ?
I think your client-to-client calls work because is just doing media 
bypass or pass through .

Regards,
Dragos



On 2015-09-16 13:31, Michael Nielsen wrote:
> My setup is based
> upon https://github.com/voxserv/freeswitch_conf_minimal [1].
> 
> On Wed, Sep 16, 2015 at 1:26 PM, Michael Nielsen
> <mic.niel84 at gmail.com> wrote:
> 
>> I've got a client with OPUS and G.711 codecs enabled and FreeSWITCH
>> with OPUS and G.711 codecs enabled.
>> I've got a SIP gateway connected to FreeSWITCH with only support for
>> G.711.
>> 
>> I want to have clients only use OPUS codec - as this seems best for
>> mobile data connections.
>> 
>> As of now client <-> FS <-> client use OPUS, but whenever the SIP
>> gateway is involved G.711 is chosen.
>> 
>> If I disable G.711 codec on the client side, to force OPUS, I'm not
>> allowed to dial out via my SIP gateway. So transcoding to G.711 does
>> not occur.
>> 
>> My fs_cli reports this:
>> Hangup sofia/external/+4413265874 [CS_CONSUME_MEDIA]
>> [SERVICE_NOT_IMPLEMENTED]
>> 
>> Again, reenabling G.711 in the client and everything works.
>> 
>> I have not set disable-transcoding=true.
>> 
>> What to do?
> 
> 
> 
> Links:
> ------
> [1] https://github.com/voxserv/freeswitch_conf_minimal
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org