[Freeswitch-users] Bridging to external SIP gateway doesn't seems to be called...

[Michael Nielsen]

Hello everyone...

Apparently it was an issue with my username from my SIP provider.
They've given my an e-mail address as username, but authentication from
FreeSWITCH failed with this.

When they changed my username to a regular all a-z characters only,
everything worked.

Apoligies for this, it wasn't a FS issue.

On Sat, Sep 5, 2015 at 11:11 AM, Michael Nielsen <mic.niel84 at gmail.com>
wrote:

> Sorry, this is my dial plan:
>
> <include>
>
>   <extension name="test-dialplan">
>
>     <condition field="destination_number" expression="^\+(\d{3,20})$">
>
>       <action application="export" data="dialed_extension=$1"/>
>
>       <action application="set"
> data="effective_caller_id_number=${outbound_caller_id_number}"/>
>
>       <action application="set"
> data="effective_caller_id_name=${outbound_caller_id_name}"/>
>
>       <action application="bridge" data="user/${dialed_extension}@
> ${domain_name},sofia/gateway/sip-outbound/+${dialed_extension}"/>
>
>     </condition>
>
>   </extension>
>
> </include>
>
>
> On Sat, Sep 5, 2015 at 11:03 AM, Michael Nielsen <mic.niel84 at gmail.com>
> wrote:
>
>> I'm running FreeSWITCH 1.4 on Debian 7.
>>
>> I've hooked up my FreeSWITCH to an external SIP gateway.
>>
>> The following scenarios work:
>>
>> FS -> FS
>> SIP GW -> FS
>>
>> But the following scenario does not work:
>>
>> FS -> SIP GW
>>
>> I only have one single dial plan in my setup:
>>
>> <include>
>>
>>   <extension name="test-dialplan">
>>
>>     <condition field="destination_number" expression="^\+(\d{3,20})$">
>>
>>       <action application="export" data="dialed_extension=$1"/>
>>
>>       <action application="set"
>> data="effective_caller_id_number=${outbound_caller_id_number}"/>
>>
>>       <action application="set"
>> data="effective_caller_id_name=${outbound_caller_id_name}"/>
>>
>>       <action application="bridge" data="user/${dialed_extension}@
>> ${domain_name}"/>
>>
>>       <action application="bridge" data="user/${dialed_extension}@
>> ${domain_name},sofia/gateway/sip-outbound/+${dialed_extension}"/>
>>
>>     </condition>
>>
>>   </extension>
>>
>> </include>
>>
>> My users are named the same as real GSM numbers (country code and number).
>>
>> I would like my FS to call internally if the user exists, if not, then
>> route it to my SIP gateway for connecting to the GSM world.
>>
>> As mentioned, everything works except outgoing calls to the SIP gateway.
>>
>> What goes wrong?
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150905/4fec3bad/attachment-0001.html