[Freeswitch-users] FreeSwitch - Performance issues
Giovanni Maruzzelli
gmaruzz at gmail.com
Thu Sep 3 00:27:32 MSD 2015
Seems the OP is running with pgsql in core, so it does not use sqlite db
and does not write on file system
sent from my mobile,
Giovanni Maruzzelli
cell: +39 347 266 56 18
On Sep 2, 2015 10:20 PM, "Michael Giagnocavo" <mgg at giagnocavo.net> wrote:
> Years back, I used to run FS **on Windows**, under Hyper-V (2008), on a
> Q6600 and had considerably higher perf numbers. Hundreds of CPS (shit
> traffic), with 1000-2000 in progress channels (no media, ASR like 10%
> maybe). So something is certainly pathologically wrong if you’re seeing
> things get maxed out at the numbers you show. I didn’t do anything special,
> and did routing both in-process via mod_managed as well as xml_curl.
>
>
>
> Do you have a reason not to put the FS core SQLite db on a tmpfs? That’s a
> big win. Also make sure FS’s temp dir is a tmpfs. Unless you’re persisting
> and using stuff between sessions, there’s no point in going to disk right?
> And your random, small, IOPS are gonna be an order of magnitude less than
> what you posted, at least.
>
>
>
> One thing to be aware of is CPU pinning and scheduling. First, on
> multi-socket systems, you have NUMA. This really hurts. Raw memory
> bandwidth takes a 40% hit. More importantly, you’re toasting your caches
> (which with tons of threads happens a lot anyways). One number I like to
> reference is that single ownership transfer of one cache line from socket
> to another takes ~300 cycles (vs ~10 cycles for L2 and ~40 cycles for L3).
> Hyper-V has an option to lock servers to a single NUMA node. Make sure this
> is enabled (it may cause VMs not to start if it cannot allocate all the
> resources requested – this is a good thing for VoIP apps). Then cap the
> individual VMs so they aren’t scheduling all over the place (34 should not
> need more than 1 CPU). FS spawns tons of threads and they’ll end up running
> on all CPUs even if they don’t need all that time, and that then screws up
> cache usage even more. But more importantly, it sounds like this is a busy
> server? Are you sure you’re not just way oversubscribed and the VM is
> losing out? Your steal% is 0 so I’m guessing HV isn’t reporting that
> accurately.
>
>
>
> Only other thing that comes to mind is that Hyper-V does terrible with
> time, so if you’re relying on HV time service you’re gonna be skewing all
> over. I don’t think this should hurt FS directly, but you should run ntp
> anyways to be safe.
>
>
>
> If you end up needing to scale up on a single server, you’re better off
> running multiple FS instances, each pinned to specific cores. And you
> should have OpenSIPS or something in front to do LB (and it provides a ton
> of flexibility and handiness anyways). This probably only matters if you’re
> doing high CPS (dialer or shit traffic that mostly isn’t completing). I’m
> not sure what exactly you’re benching, but it sounds like your actual use
> case is different than the test, eh?
>
>
>
> Email me directly and we can chat more about this.
>
>
>
> -Michael
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Shaun Stokes
> *Sent:* Wednesday, September 2, 2015 5:09 AM
> *To:* 'FreeSWITCH Users Help' <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] FreeSwitch - Performance issues
>
>
>
> Hi Jay,
>
>
>
> Thanks for the suggestion.
>
>
>
> We’re actually using PostgreSQL, the file system is a 2TB RAID5 with 10x
> 278GB SAS 10K RPM disks, read is 1GB/s (23,000 IOPS) write is 500MB/s
> (15,000 IOPS) but we’re only using a fraction of this.
>
>
>
> Thanks,
>
> Shaun
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [
> mailto:freeswitch-users-bounces at lists.freeswitch.org
> <freeswitch-users-bounces at lists.freeswitch.org>] *On Behalf Of *jay binks
> *Sent:* 02 September 2015 11:37
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] FreeSwitch - Performance issues
>
>
>
> I may have missed it in your previous emails, but im assuming you have the
> core DB on a tempfs
> or somewhere other than the default location on spinning rust ?
>
>
>
> Jay
>
>
>
> On 2 September 2015 at 18:53, Shaun Stokes <
> shaun.stokes at itec-support.co.uk> wrote:
>
> Hi Brian,
>
>
>
> I’m a huge fan of virtualization, but in our environment it simply doesn’t
> provide the performance we’re looking for. The tests carried out were 10
> second calls which were routed to a Call Centre Queue with one registered
> SIP extension as a member.
>
>
>
> There was a significant improvement when we tested on an Amazon VM in
> comparison to Hyper-V, but we’d like a system which can handle large
> volumes of call traffic, based on our tests this will need to be physical
> hardware to achieve the best performance.
>
>
>
> Further to this, we have managed to resolve our initial problem with CPU
> spikes on Hyper-V following these steps:
>
> · Disable VMQ on all physical and virtual adapters on the Hyper-V
> host which are linked to the FreeSwitch VM
>
> · Reduce the virtual cores on all VMs to at least half of the
> available physical cores
>
> · Increase the Processor Relative weight on the FreeSwitch VMs to
> 200 (default 100)
>
>
>
> Thanks,
>
> Shaun
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Brian West
> *Sent:* 01 September 2015 21:21
>
>
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] FreeSwitch - Performance issues
>
>
>
> Shaun,
>
>
>
> 800 concurrent with 400cps, expectations are a little out of touch with
> reality and your test is no where near real world. Your call duration is
> ~2000ms, little to no time to actually do anything useful. You're burning
> the bulk of your CPU time on signaling and doing no real work with the
> session.
>
>
>
> So yes, you'll always get the best results out of bare metal, but you can
> also get good performance on a VM (*)
>
>
>
> (*) This is in no way an endorsement of running FreeSWITCH in a VM, Your
> mileage may vary depending on your specific application and load
> requirements.
>
>
>
> Thanks,
>
>
>
>
>
>
>
>
>
> On Tue, Sep 1, 2015 at 3:08 PM, Shaun Stokes <
> shaun.stokes at itec-support.co.uk> wrote:
>
> Update
>
> We've performed various tests and have come to the conclusion as advised
> by others, that visualization is causing bottlenecks.
>
> Using Amazon EC2 on an 8 core high performance virtual server this maxed
> out at around 800 concurrent sessions, 400 sessions per second.
>
> Using a Dell 1950 8 core server this was able to handle 1000 concurrent
> sessions, 400 sessions per second and still have plenty of resource
> available. Average CPU was fluctuating between 30-40% under peak load.
>
> Conclusion, if you want to run a high performance FreeSwitch server in a
> production you should stick with physical hardware and avoid visualization
> where possible.
> ________________________________________
> From: freeswitch-users-bounces at lists.freeswitch.org [
> freeswitch-users-bounces at lists.freeswitch.org] on behalf of Shaun Stokes [
> shaun.stokes at itec-support.co.uk]
> Sent: 28 August 2015 15:37
> To: 'FreeSWITCH Users Help'
>
> Subject: Re: [Freeswitch-users] FreeSwitch - Performance issues
>
> Hi Nathan,
>
> Thanks for the suggestion, we still see the CPU spikes when is under load
> after reducing to 8 cores but I think there may actually be an improvement
> in the audio quality.
>
> It's still not what we're expecting, so we will have to test our build on
> physical hardware too.
>
> Thanks,
> Shaun
>
> -----Original Message-----
> From: freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Nathan
> Neulinger
> Sent: 28 August 2015 15:04
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Subject: Re: [Freeswitch-users] FreeSwitch - Performance issues
>
> Yes, I know you said Hyper-V, I don't know if it has the same sort of
> scheduler behavior or not, just mentioned the vmware for context.
>
> On 08/28/2015 08:46 AM, Nathan Neulinger wrote:
> > One thing that I see jump out - you've probably got too many virtual
> > cores defined on that VM, particularly since you've assigned # vcpu the
> same as the number of real cores on the host system.
> >
> > Try your test again dropping that to 8 virtual CPUs and I think you
> > might see better results. (Or at least drop to less than 100% of the
> > total cores on the hardware.)
> >
> > Particularly if this host system has other vms running on it, you're
> > hurting the vm scheduler's ability to hand out resources. With vmware,
> > I believe a simple rule of thumb is that scheduler requires N-1 CPUs
> > to be locked to schedule execution of an N cpu virtual machine - so even
> if it doesn't need all of the CPUs, it has to reserve all of them any time
> you have more than a 2 vCPU vm.
> >
> > -- Nathan
> >
> > On 08/28/2015 08:18 AM, Michael Jerris wrote:
> >> The numbers your posting are fairly low, I'm guessing this is a
> >> grossly underpowered vm that is causing your issues
> >>
> >> On Friday, August 28, 2015, Shaun Stokes <
> shaun.stokes at itec-support.co.uk <mailto:shaun.stokes at itec-support.co.uk>>
> wrote:
> >>
> >> Hi Peter,____
> >>
> >> __ __
> >>
> >> Thanks for the advice, this is something we're already looking
> into but we don't have the new hardware available
> >> yet.____
> >>
> >> __ __
> >>
> >> Debian 8 has great integration with Hyper-V on 2012R2 and operates
> as a Generation 2 VM, obviously it's never going
> >> to be as good as running directly on the hardware but we were
> >> hoping for better performance.____
> >>
> >> __ __
> >>
> >> Thanks,____
> >>
> >> Shaun____
> >>
> >> __ __
> >>
> >> *From:*freeswitch-users-bounces at lists.freeswitch.org
> >> <javascript:_e(%7B%7D,'cvml','
> freeswitch-users-bounces at lists.freeswitch.org');>
> >> [mailto:freeswitch-users-bounces at lists.freeswitch.org
> >> <javascript:_e(%7B%7D,'cvml','
> freeswitch-users-bounces at lists.freeswitch.org');>] *On Behalf Of *Peter
> Olsson
> >> *Sent:* 28 August 2015 10:43
> >> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org
> >> <javascript:_e(%7B%7D,'cvml','
> freeswitch-users at lists.freeswitch.org');>>
> >> *Subject:* Re: [Freeswitch-users] FreeSwitch - Performance
> >> issues____
> >>
> >> __ __
> >>
> >> If you want high performance, I recommend using real hardware, not
> a virtual machine setup - it will cause you
> >> issues.____
> >>
> >> __ __
> >>
> >> /Peter____
> >>
> >> __ __
> >>
> >> 2015-08-28 9:44 GMT+02:00 Shaun Stokes <
> shaun.stokes at itec-support.co.uk
> >>
> >> <javascript:_e(%7B%7D,'cvml','shaun.stokes at itec-support.co.uk');>>:__
> >> __
> >>
> >> Hi Michael,____
> >>
> >> ____
> >>
> >> Thanks for the response and recommendation.____
> >>
> >> ____
> >>
> >> Our new build is now on Debian 8 Jessie, performance on the
> system is noticeably better and any audio problems
> >> while the system is under load are significantly reduced but
> we do still experience spikes along with reduced
> >> audio quality when the system is processing 20 calls per
> >> second while already maintaining 80 existing calls.____
> >>
> >> ____
> >>
> >> We're still hitting some kind of bottleneck, what should we
> expect to be able to support on a single piece of
> >> hardware? We've kept our dialplans as small as possible and
> we're using Memcache, but something tells me it's
> >> the call setup process which is triggering the spikes, is this
> possibly a limitation on the SIP profiles which
> >> are single threaded?____
> >>
> >> ____
> >>
> >> I also see FreeSWITCH supports clustering but it's in relation
> to high availability, is it possible to cluster a
> >> single FreeSWITCH instance across multiple hardware or should
> we be looking elsewhere to solve these
> >> bottlenecks?____
> >>
> >> ____
> >>
> >> We switched to TCP Vegas on our new build as recommended on
> the FreeSWITCH Wiki, this has provided a noticeable
> >> reduction in audio latency but doesn't solve the issue with
> >> CPU spikes.____
> >>
> >> ____
> >>
> >> Many Thanks,____
> >>
> >> Shaun____
> >>
> >> ____
> >>
> >> *From:*freeswitch-users-bounces at lists.freeswitch.org
> >> <javascript:_e(%7B%7D,'cvml','
> freeswitch-users-bounces at lists.freeswitch.org');>
> >> [mailto:freeswitch-users-bounces at lists.freeswitch.org
> >> <javascript:_e(%7B%7D,'cvml','
> freeswitch-users-bounces at lists.freeswitch.org');>] *On Behalf Of *Michael
> Jerris
> >> *Sent:* 15 August 2015 23:00
> >> *To:* FreeSWITCH Users Help <
> freeswitch-users at lists.freeswitch.org
> >> <javascript:_e(%7B%7D,'cvml','
> freeswitch-users at lists.freeswitch.org');>>
> >> *Subject:* Re: [Freeswitch-users] FreeSwitch - Performance
> >> issues____
> >>
> >> ____
> >>
> >> There are multiple known issues with Ubuntu 12.04. We
> reccomend Debian 8 Jessie.
> >>
> >> On Friday, August 14, 2015, Shaun Stokes <
> shaun.stokes at itec-support.co.uk
> >>
> >> <javascript:_e(%7B%7D,'cvml','shaun.stokes at itec-support.co.uk');>>
> >> wrote:____
> >>
> >> Hi,____
> >>
> >> ____
> >>
> >> We're experiencing performance issues with FreeSwitch, our
> target is 500 concurrent sessions, but at the
> >> moment this starts to bottleneck around 30.____
> >>
> >> ____
> >>
> >> Host system:____
> >>
> >> Windows Server 2012 Hyper-V Host____
> >>
> >> AMD Opteron 4386 (2 processors) - 16 cores total____
> >>
> >> 128GB DDR3____
> >>
> >> 2TB RAID 5 (700MB/s tested read and write
> >> throughput)____
> >>
> >> ____
> >>
> >> FreeSwitch Virtual Machine:____
> >>
> >> FreeSwitch 1.4.15____
> >>
> >> Ubuntu 12.04 LTS____
> >>
> >> 16 Virtual cores (high priority)____
> >>
> >> 2GB RAM (would assign more but FreeSwitch never seems to
> >> use much)____
> >>
> >> 500GB HD (on VHDX)____
> >>
> >> ____
> >>
> >> After around 30 concurrent sessions we begin to see CPU
> spikes almost every time a new call comes in, as the
> >> sessions increase the size and frequency of the CPU spikes
> also increase. The system seems to be able to sit
> >> comfortably with over 100 concurrent sessions and 80% idle
> CPU, providing we don't have any new calls
> >> hitting the platform. The spikes are causing audio (RTP)
> to stutter or in some cases drop completely for a
> >> few seconds.____
> >>
> >> ____
> >>
> >> The FreeSwitch spikes are occurring on all 16 cores, we
> have been monitoring the system using htop and
> >> mpstat.____
> >>
> >> ____
> >>
> >> This is an example of when we receive an inbound call
> >> while we have 34 concurrent sessions:____
> >>
> >> 14:26:04 CPU %usr %nice %sys %iowait %irq
> %soft %steal %guest %idle____
> >>
> >> 14:26:05 all 1.67 0.00 27.34 0.00 0.25
> 0.00 0.00 0.00 70.74____
> >>
> >> 14:26:05 0 1.00 0.00 28.00 0.00 0.00
> 0.00 0.00 0.00 71.00____
> >>
> >> 14:26:05 1 0.99 0.00 26.73 0.00 0.00
> 0.00 0.00 0.00 72.28____
> >>
> >> 14:26:05 2 0.99 0.00 26.73 0.00 0.00
> 0.00 0.00 0.00 72.28____
> >>
> >> 14:26:05 3 3.92 0.00 26.47 0.00 0.00
> 0.00 0.00 0.00 69.61____
> >>
> >> 14:26:05 4 0.99 0.00 25.74 0.00 1.98
> 0.00 0.00 0.00 71.29____
> >>
> >> 14:26:05 5 0.99 0.00 26.73 0.00 0.99
> 0.00 0.00 0.00 71.29____
> >>
> >> 14:26:05 6 0.00 0.00 26.47 0.00 0.98
> 0.00 0.00 0.00 72.55____
> >>
> >> 14:26:05 7 0.00 0.00 26.73 0.00 0.00
> 0.00 0.00 0.00 73.27____
> >>
> >> 14:26:05 8 3.96 0.00 27.72 0.00 0.00
> 0.00 0.00 0.00 68.32____
> >>
> >> 14:26:05 9 2.00 0.00 27.00 0.00 0.00
> 0.00 0.00 0.00 71.00____
> >>
> >> 14:26:05 10 6.00 0.00 32.00 0.00 0.00
> 0.00 0.00 0.00 62.00____
> >>
> >> 14:26:05 11 1.96 0.00 27.45 0.00 0.00
> 0.00 0.00 0.00 70.59____
> >>
> >> 14:26:05 12 0.99 0.00 26.73 0.00 0.00
> 0.00 0.00 0.00 72.28____
> >>
> >> 14:26:05 13 1.00 0.00 28.00 0.00 0.00
> 0.00 0.00 0.00 71.00____
> >>
> >> 14:26:05 14 0.00 0.00 27.00 0.00 0.00
> 0.00 0.00 0.00 73.00____
> >>
> >> ____
> >>
> >> This is when the system is not receiving an inbound call
> but is sitting comfortably at 34 concurrent
> >> sessions:____
> >>
> >> 14:25:57 CPU %usr %nice %sys %iowait %irq
> %soft %steal %guest %idle____
> >>
> >> 14:25:58 all 0.87 0.00 0.62 0.00 0.12
> 0.00 0.00 0.00 98.39____
> >>
> >> 14:25:58 0 0.99 0.00 0.99 0.00 0.00
> 0.00 0.00 0.00 98.02____
> >>
> >> 14:25:58 1 0.99 0.00 0.99 0.00 0.00
> 0.00 0.00 0.00 98.02____
> >>
> >> 14:25:58 2 0.98 0.00 0.98 0.00 0.00
> 0.00 0.00 0.00 98.04____
> >>
> >> 14:25:58 3 0.00 0.00 0.99 0.00 0.00
> 0.00 0.00 0.00 99.01____
> >>
> >> 14:25:58 4 0.00 0.00 0.00 0.00 1.98
> 0.00 0.00 0.00 98.02____
> >>
> >> 14:25:58 5 0.00 0.00 0.00 0.00 0.99
> 0.00 0.00 0.00 99.01____
> >>
> >> 14:25:58 6 0.00 0.00 0.99 0.00 0.00
> 0.00 0.00 0.00 99.01____
> >>
> >> 14:25:58 7 0.00 0.00 0.99 0.00 0.00
> 0.00 0.00 0.00 99.01____
> >>
> >> 14:25:58 8 5.00 0.00 1.00 0.00 0.00
> 0.00 0.00 0.00 94.00____
> >>
> >> 14:25:58 9 1.00 0.00 0.00 0.00 0.00
> 0.00 0.00 0.00 99.00____
> >>
> >> 14:25:58 10 1.00 0.00 0.00 0.00 0.00
> 0.00 0.00 0.00 99.00____
> >>
> >> 14:25:58 11 0.99 0.00 0.99 0.00 0.00
> 0.00 0.00 0.00 98.02____
> >>
> >> 14:25:58 12 0.00 0.00 0.00 0.00 0.00
> 0.00 0.00 0.00 100.00____
> >>
> >> 14:25:58 13 1.98 0.00 0.99 0.00 0.00
> 0.00 0.00 0.00 97.03____
> >>
> >> 14:25:58 14 0.00 0.00 0.00 0.00 0.00
> 0.00 0.00 0.00 100.00____
> >>
> >> 14:25:58 15 0.00 0.00 0.00 0.00 0.00
> 0.00 0.00 0.00 100.00____
> >>
> >> ____
> >>
> >> We're using FreeSwitch in multi-tenant mode, we have tried
> dedicating a single VM for one tenancy but still
> >> experience the issue. My assumption has been that this
> will be due to the dialplan, I've optimized this
> >> slightly by writing LUA scripts to handle some of the
> inbound calls this appears to take away some of the
> >> load but we're still using the internal dialplans for each
> tenancy (tenancy dialplans have an average of 300
> >> entries).____
> >>
> >> ____
> >>
> >> We are using the following arguments when running
> >> FreeSwitch:____
> >>
> >> -rp -nc -nonat____
> >>
> >> ____
> >>
> >> I've seen another post which says we should operate
> FreeSwitch in High Performance mode using -hp but can't
> >> find anything information about this, is this still a
> >> valid argument to use with FreeSwitch?____
> >>
> >> ____
> >>
> >> Has anyone experienced similar performance issues before
> >> or have any advice?____
> >>
> >> ____
> >>
> >> Hope someone may be able help.____
> >>
> >> ____
> >>
> >> Thanks,____
> >>
> >> Shaun____
> >>
> >>
> >>
> ______________________________________________________________________
> >> This message has been checked for all known viruses by
> MessageLabs Virus Scanning Service.
> >>
> >> _____________________________________________________________________
> >> _____
> >>
> >>
> >>
> ______________________________________________________________________
> >> This message has been checked for all known viruses by
> MessageLabs Virus Scanning Service.
> >>
> >> _____________________________________________________________________
> >> _____
> >>
> >>
> >>
> ______________________________________________________________________
> >> This message has been checked for all known viruses by
> MessageLabs Virus Scanning Service.
> >>
> >> _____________________________________________________________________
> >> _____
> >>
> >>
> >>
> _________________________________________________________________________
> >> Professional FreeSWITCH Consulting Services:
> >> consulting at freeswitch.org <javascript:_e(%7B%7D,'cvml','
> consulting at freeswitch.org');>
> >> http://www.freeswitchsolutions.com
> >>
> >> Official FreeSWITCH Sites
> >> http://www.freeswitch.org
> >> http://confluence.freeswitch.org
> >> http://www.cluecon.com
> >>
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users at lists.freeswitch.org');>
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> http://www.freeswitch.org____
> >>
> >> __ __
> >>
> >>
> >>
> ______________________________________________________________________
> >> This message has been checked for all known viruses by MessageLabs
> Virus Scanning Service.
> >>
> >> _____________________________________________________________________
> >> _____
> >>
> >>
> >>
> ______________________________________________________________________
> >> This message has been checked for all known viruses by MessageLabs
> Virus Scanning Service.
> >>
> >> _____________________________________________________________________
> >> _
> >>
> >>
> >>
> >> _____________________________________________________________________
> >> ____ Professional FreeSWITCH Consulting Services:
> >> consulting at freeswitch.org
> >> http://www.freeswitchsolutions.com
> >>
> >> Official FreeSWITCH Sites
> >> http://www.freeswitch.org
> >> http://confluence.freeswitch.org
> >> http://www.cluecon.com
> >>
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-us
> >> ers
> >> http://www.freeswitch.org
> >>
> >
>
> --
> ------------------------------------------------------------
> Nathan Neulinger nneul at mst.edu
> Missouri S&T Information Technology (573) 612-1412
> System Administrator - Architect
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
>
>
> --
>
> *Brian West*
> brian at freeswitch.org
>
> *Twitter: @FreeSWITCH , @briankwest*
> http://www.freeswitchbook.com
> http://www.freeswitchcookbook.com
>
> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit:
> /r/freeswitch <https://www.reddit.com/r/freeswitch>
>
> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378)
> *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
>
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
>
>
> --
>
> Sincerely
>
> Jay
>
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
>
> ______________________________________________________________________
> This message has been checked for all known viruses by MessageLabs Virus
> Scanning Service.
> ______________________________________________________________________
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150902/3f615557/attachment-0001.html
Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users
mailing list