[Freeswitch-users] video conference get error on mux video-mode

Achintha achinthau at gmail.com
Tue Nov 24 15:14:35 MSK 2015


hi,

I'am using freeswitch 1.7.0+git~20151119T221015Z~9e0f30c58b~64bit (git
9e0f30c 2015-11-19 22:10:15Z 64bit) on ubuntu 14.04
I have configured webrtc with ws and vedio (mod_vpx). video calls working
properly through the extensions
then i try to configure video conference with following configurations

dial-plane

 <extension name="cdquality_conferences">
      <condition field="destination_number" expression="^5555$">
        <action application="answer"/>
        <action application="conference"
data="$1-${domain_name}@video-mcu-stereo"/>
      </condition>
    </extension>


conference.conf.xml

 <profile name="video-mcu-stereo">
      <param name="domain" value="$${domain}"/>
      <param name="rate" value="48000"/>
      <param name="channels" value="2"/>
      <param name="interval" value="20"/>
      <param name="energy-level" value="200"/>
      <!-- <param name="tts-engine" value="flite"/> -->
      <!-- <param name="tts-voice" value="kal16"/> -->
      <param name="muted-sound" value="conference/conf-muted.wav"/>
      <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>
      <param name="alone-sound" value="conference/conf-alone.wav"/>
      <param name="moh-sound" value="local_stream://stereo"/>
      <param name="enter-sound" value="tone_stream://%(200,0,500,600,700)"/>
      <param name="exit-sound"
value="tone_stream://%(500,0,300,200,100,50,25)"/>
      <param name="kicked-sound" value="conference/conf-kicked.wav"/>
      <param name="locked-sound" value="conference/conf-locked.wav"/>
      <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>
      <param name="is-unlocked-sound"
value="conference/conf-is-unlocked.wav"/>
      <param name="pin-sound" value="conference/conf-pin.wav"/>
      <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>
      <param name="caller-id-name" value="$${outbound_caller_name}"/>
      <param name="caller-id-number" value="$${outbound_caller_id}"/>
      <param name="comfort-noise" value="false"/>
      <param name="conference-flags"
value="rfc-4579|livearray-sync|livearray-json-status|video-muxing-personal-canvas|video-required-for-canvas"/>
      <param name="video-mode" value="mux"/>
      <param name="video-layout-name" value="3x3"/>
<!--      <param name="video-layout-name" value="group:grid"/>-->
      <param name="video-canvas-size" value="1920x1080"/>
      <param name="video-canvas-bgcolor" value="#333333"/>
      <param name="video-layout-bgcolor" value="#000000"/>
      <param name="video-codec-bandwidth" value="1mb"/>
      <param name="video-fps" value="15"/>
    </profile>

When I call the conference number, i got error on console as.

"[ERR] mod_vpx.c:675 VPX encode error 8:Invalid parameter:Image size must
match encoder init configuration size"

looking for advice to solve this.

-- 
Best Regards..
Achintha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20151124/770251a4/attachment.html 


Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list