[Freeswitch-users] need SIP IP / RTP recommendation

[Sergey Safarov]

Try dummy interface (equal loopback) as external FS profile and configure
routing packets from/to this interface.

https://www.centos.org/docs/5/html/Virtualization-en-US/ch-virt-laptop-configurations.html

On Mon, May 11, 2015 at 3:38 PM, Jason Holden <jason.holden at start.ca> wrote:

>  I am, the problem is when the route changes on the FS server due to an
> outage on the primary link.
>
> Is there a way to force FS to switch between the IPS dependant on the
> default route?
>
> I have two profiles and each is setup with a separate SIP EXT, RTP EXT IP
> dependant on its WAN link details.
>
> When the primary link goes down and the failover circuit is operational
> calls are still trying to route over the primary profile and SIP is broken
> since those public IPS are currently not in use.
>
>
>
>
>
>
>   ------------------------------
>
> *From:* Steven Ayre [mailto:steveayre at gmail.com]
> *Sent:* Monday, May 11, 2015 3:49 AM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] need SIP IP / RTP recommendation
>
>
>
> Set the sip-ip and rtp-ip parameters on the profiles directly rather than
> using ${local_ipv4} (which guesses your main WAN IP) or setting the
> external_ip variables in vars.xml. The later are only to simplify matters
> on simple setups (ie one WAN IP), for multihomed hosts such as yours you
> should set it on the profile directly.
>
>
>
> On 8 May 2015 at 13:58, Jason Holden <jason.holden at start.ca> wrote:
>
> Currently I have a client who is using multiple WAN IP addresses.
>
> On route fail over FS still tries to use the original IP details from the
> external profile and not the secondary circuit details from the secondary
> external profile.
>
> What have others done to address this to ensure failover works propperly?
>
>
>
>
>
>
>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150511/57871430/attachment.html