[Freeswitch-users] Question re: local_ip_v4

[T Fred Farmington]

An additional piece of information that may be helpful in determining what is going wrong.....

After having the FS service up and running I attempt to Register a SIP phone by doing a ReStart on it.

Its extension is  105   and there is an associated  'extension' xml file for 105 in the  conf\directory\default   directory   (note - it used to work on another FS server)

When that Registration attempt is 'seen' by FS I get the following message through FS_CLI:
      Can't find user [105 at 192.168.nn.nn]  from <the phone's IP address>
      You must define a domain called  <FS 'inside' IP address 192.168.nn.nn>  in your directory and add a user with the ID '105' attribute 
      and you must configure your device to use the proper domain in its authentication credentials

I am sure that message is telling me something important, but I thought that I had already done everything that it is now telling me to do again.
1.  I have extension 105 defined in the directory
2.  I hope to have configured FS to 'see' domain 192.168.nn.nn  as its internal SIP IP
3.  I have the phone configured to Register on FS's 'internal' domain

What is wrong?
And, specifically what do I need to do to resolve this?

Thanks
TF


     


--------------------------------------------
On Tue, 3/31/15, Vallimamod Abdullah <vma at 440hz.fr> wrote:

 Subject: Re: [Freeswitch-users] Question re:  local_ip_v4
 To: "FreeSWITCH Users Help" <freeswitch-users at lists.freeswitch.org>
 Date: Tuesday, March 31, 2015, 3:02 AM
 
 Hi,
 
 Try to set the following in your internal
 profile:
 
     <param
 name="sip-ip"
 value="$${internal_sip_ip}”/>
  
   <param name="rtp-ip"
 value="$${internal_rtp_ip}"/>
 
 along with the following in
 vars.xml:
 
  
    <X-PRE-PROCESS cmd="set"
 data="internal_sip_ip=192.168.nn.nn"/>
      <X-PRE-PROCESS
 cmd="set"
 data="internal_rtp_ip=192.168.nn.nn”/>
 
 Keep also in mind that you
 need to restart freeswitch everytime you change any
 X-PRE-PROCESS statement.
 
 Best Regards,
 Vallimamod
 .
 
 > On 30 Mar 2015, at
 22:57, T Fred Farmington <tfred31 at yahoo.com>
 wrote:
 > 
 > We have 2
 network cards on our FS server.
 > *  One
 IP goes to the 'outside' world  (IP =
 107.1.nn.nn)
 > *  And the other IP goes
 to the 'inside' world  (IP = 192.168.nn.nn)
 > 
 > In spite of making
 suggested changes to   vars.xml   when
 FS launches it sets itself up to 'listen' to the
 'outside' world (IP = 107 etc.) 
 > But the result of that is that none of the
 in-house SIP phones can register to it.
 >
 
 > The changes I made (following
 suggestions found on the web) 
 to   vars.xml   are as follows:
 >   New entry:
 >        <X-PRE-PROCESS
 cmd="set"
 data="local_ip_v4=192.168.nn.nn"/>   <!--
 where nn values are 'real' values -->
 >   This new line was entered
 immediately before
 >   
    <X-PRE-PROCESS cmd="set"
 data="domain=$${local_ip_v4}"/>
 > 
 > Additionally another
 web reference suggested that the following 2 lines be added
 near the bottom of   vars.xml
 >      <X-PRE-PROCESS
 cmd="set"
 data="internal_sip_ip=192.168.nn.nn"/>
 >      <X-PRE-PROCESS
 cmd="set"
 data="internal_rtp_ip=192.168.nn.nn"/>
 > 
 >
 PROBLEM:   None of that seems to
 work.   
 >             
       Even after not only ReStarting the FS Service, but
 also after ReStarting the FS Server itself and then Starting
 the FS Service
 > 
 >
 When through FS_CLI  I run:    sofia  status 
    and/or   sofia status profile
 internal      both of them show the 107 IP instead of the
 192 IP
 > Those changes have not caused FS
 to 'see' and 'listen to' the 192  port.
 > 
 > What am I doing
 wrong?
 > 
 > Your
 advice/suggestions would be greatly appreciated.
 > 
 > Thanks
 > TF
 
 
 _________________________________________________________________________
 Professional FreeSWITCH Consulting Services:
 
 consulting at freeswitch.org
 http://www.freeswitchsolutions.com
 
 Official FreeSWITCH Sites
 http://www.freeswitch.org
 http://confluence.freeswitch.org
 http://www.cluecon.com
 
 FreeSWITCH-users mailing
 list
 FreeSWITCH-users at lists.freeswitch.org
 http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
 UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
 http://www.freeswitch.org