[Freeswitch-users] Re-establish connection within a SIP session
Anthony Minessale
anthony.minessale at gmail.com
Sat Mar 28 01:38:41 MSK 2015
You could probably use a proxy like kamailio or opensips to translate the
websockets to UDP or TCP and pass it on to FS but FS itself cannot be
modified to do what you want.
On Fri, Mar 27, 2015 at 5:31 PM, Michael Jerris <mike at jerris.com> wrote:
> I understand what you are trying to do. The current sofia code has no way
> to handle this currently, and we don't have plans to add this
> functionality, because we can already do so with mod_verto. If you want
> this functionality in freeswitch, your options are using mod_verto, or a
> huge amount of c code in mod_sofia that will be very error prone as it will
> have to turn the state engine in that module on its head.
>
> On Mar 27, 2015, at 5:31 PM, Mateus Dalepiane <mdalepiane at gmail.com>
> wrote:
>
> Hey guys,
>
> Thank you all for the attention and patience to respond my questions.
>
> I understand that the ideal solution would be to use Verto, but that's not
> practicable in our project right now.
>
> So, about the reconnected session, I am not sure if I made myself clear
> about what is happening, and what I am trying to do.
>
> WebRTC client . . . nginx . . . . FreeSWITCH
> (SIP.js) proxy |
> | | |
> | CONNECT | |
> |---------------->| |
> | INVITE |
> |---------------------------------->|
> | OK |
> |<----------------------------------|
> | ACK |
> |---------------------------------->|
> | Media Session |
> |<=================================>|
> | . |
> | . |
> | . |
> | CONNECTION FAIL | |
> |<-----XXXX------>| |
> | Media continues to flow |
> |<=================================>|
> | CONNECT | |
> |---------------->| |
> | re-INVITE |
> |---------------------------------->|
> | OK |
> |<----------------------------------|
> | ACK |
> |---------------------------------->|
> | . |
> | . |
> | . |
> | | INVITE |
> | |<------XXX-------|
> | | | FS hang up call
> | Media stop flowing |
> |<==============XXXXX==============>|
>
> So, based on this scenario, when the Websocket connection to nginx fails,
> we reconnect it, but since the media is going through other connections,
> RTP over UDP, it is not affected.
>
> Now, with the new websocket connection in place the client is able to send
> re-INVITEs and BYE to FS, and it is recognized as requests for the session
> established using the first connection.
>
> The problem is that when FS tries to send a message to the client it fails
> (NORMAL_TEMPORARY_FAILURE) and hangs up the call.
>
> Right now my question is:
> - How does FS know which connection it should use to send SIP messages to
> the client?
>
> Thank you!
>
> 2015-03-27 17:15 GMT-03:00 Michael Jerris <mike at jerris.com>:
>
>> verto has its own JS client in tree.
>>
>> On Mar 27, 2015, at 4:05 PM, Abdul Hakeem <alhakeem at gmail.com> wrote:
>>
>> Hi Guys,
>> What’s the best recommended client to connect to Verto ?
>> Cheers,
>> Abdul Hakeem
>>
>> *From:* freeswitch-users-bounces at lists.freeswitch.org [
>> mailto:freeswitch-users-bounces at lists.freeswitch.org
>> <freeswitch-users-bounces at lists.freeswitch.org>] *On Behalf Of *Michael
>> Jerris
>> *Sent:* Friday, March 27, 2015 7:43 PM
>> *To:* FreeSWITCH Users Help
>> *Subject:* Re: [Freeswitch-users] Re-establish connection within a SIP
>> session
>>
>> This is not a feature in any of the sip js stacks I know of, and I'm not
>> quite sure how it would be implemented on top of sip. As Brian said, this
>> is a feature in verto.
>>
>>
>> On Mar 27, 2015, at 3:28 PM, Mateus Dalepiane <mdalepiane at gmail.com>
>> wrote:
>>
>>
>> Hello Brian,
>> Thank you for the answer. We will consider using Verto in the future.
>>
>> Right now we will have to stick with WebRTC over SIP, we are using SIP.js
>> for that.
>>
>> I ran some more tests and once the Websocket connection drops and is
>> re-established,
>> even if we send a re-INVITE, FS identifies it as belonging to the old
>> call, and
>>
>> responds to it, after a while FS hangs up the call reporting a
>> NORMAL_TEMPORARY_FAILURE.
>> If the Websocket is not disconnected, I can see that FS sends an
>> re-INVITE to the client after a while,
>> so I guess that what is happening is that when FS tries to send this
>> re-INVITE it realizes that the old connection
>>
>> was closed and hangs up the call.
>> My question now is: Why FS does not update the connection information for
>> the call once the re-INVITE from
>> the new connection is received?
>>
>> 2015-03-26 15:15 GMT-03:00 Brian West <brian at freeswitch.org>:
>> Have you taken a look at Verto?
>>
>> On Thu, Mar 26, 2015 at 12:08 PM, Mateus Dalepiane <mdalepiane at gmail.com>
>> wrote:
>>
>> We have the following scenario: The session is established between WebRTC
>> and FreeSWITCH using Websockets.
>>
>> Once the session is established, if the websocket connection drops the
>> media continues to flow utilFreeSWITCH tries to send a re-INVITE to the
>> client. At this point it realizes that the connection was closed and hangs
>> up the call.
>>
>> Now, if the websocket connection drops and is re-established, would it
>> be possible to inform FreeSWITCH that the new connection should be used for
>> the previously established session?
>>
>> If the WebRTC client sends an INVITE message with the old session
>> parameters, FreeSWITCH will be able to understand that it belongs to the
>> old session?
>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
--
Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞
http://twitter.com/FreeSWITCH
☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+
<http://freeswitch.org/g+>*
ClueCon Weekly Development Call
☎ sip:888 at conference.freeswitch.org ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150327/d48d936e/attachment-0001.html
Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users
mailing list