[Freeswitch-users] fs_cli will not connect on Fresh install on Debian

[Richard Mace]

Nothing, by the looks of things

root at FreeSWITCH:~# netstat -an | grep 8021
root at FreeSWITCH:~#

Thanks


On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin at gmail.com> wrote:

> Richard, what do you see in the output:
>
> netstat -an | grep 8021
>
>
>
> On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin
> <ssinyagin at gmail.com> wrote:
> > this is exactly what I saw on a system which had no IPv4 address on
> > its ethernet ports. FreeSWITCH was just not listening to port 8021,
> > without any errors in the log.
> >
> > On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace at gmail.com>
> wrote:
> >> Hi Bote,
> >> Tried this as well, on the local machine:
> >>
> >> root at FreeSWITCH:~# fs_cli 127.0.0.1
> >> [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
> >>
> >> root at FreeSWITCH:~# /etc/init.d/freeswitch status
> >> [ ok ] freeswitch is running.
> >>
> >> Richard
> >>
> >>
> >> On 10 March 2015 at 07:11, Bote Man <bote_radio at botecomm.com> wrote:
> >>>
> >>> You could explicitly direct fs_cli to a particular i.p. address either
> on
> >>> the command line or using a profile definition.
> >>>
> >>>
> >>>
> >>> Bote
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> From: Richard Mace
> >>> Sent: Tuesday, 10 March, 2015 02:20
> >>> To: FreeSWITCH Users Help
> >>> Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh
> install
> >>> on Debian
> >>>
> >>>
> >>>
> >>> Hi,
> >>>
> >>> Is there an fs_cli command that I can use that will get me round the
> >>> current bug?
> >>>
> >>> Its strange as it's only happened within the last month, as I built a
> >>> system recently that worked fine out of the box.
> >>>
> >>>
> >>>
> >>> Thanks
> >>>
> >>>
> >>>
> >>> Richard
> >>>
> >>>
> >>>
> >>> On 9 March 2015 at 10:37, Richard Mace <richard.mace at gmail.com> wrote:
> >>>
> >>> Hi Brian,
> >>>
> >>> Removed the line, and rebooted, but still getting:
> >>>
> >>> root at FreeSWITCH:~# fs_cli
> >>> [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
> >>>
> >>> Richard
> >>>
> >>>
> >>>
> >>> On 6 March 2015 at 20:42, Brian West <brian at freeswitch.org> wrote:
> >>>
> >>> remove
> >>>
> >>> ::1     localhost ip6-localhost ip6-loopback
> >>>
> >>>
> >>>
> >>> from /etc/hosts
> >>>
> >>>
> >>>
> >>> its a bug in debian.
> >>>
> >>>
> >>>
> >>> On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace at gmail.com>
> >>> wrote:
> >>>
> >>> Hi,
> >>>
> >>>
> >>>
> >>> Sorry, I should have clarified that this is running locally on the
> machine
> >>> running FreeSWITCH.
> >>>
> >>>
> >>>
> >>> Richard
> >>>
> >>>
> >>>
> >>> On 6 March 2015 at 20:02, Bote Man <bote_radio at botecomm.com> wrote:
> >>>
> >>> On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
> >>>
> >>>
> >>>
> >>> To connect from a remote machine put a valid routable interface address
> >>> (although I have 0.0.0.0 in mine) in
> >>>
> >>> conf/autoload_configs/event_socket.conf.xml
> >>>
> >>>
> >>>
> >>> and change the password and maybe even the port depending on the
> >>> crackability of your network.
> >>>
> >>>
> >>>
> >>> Then you’ll probably want to configure a profile configuration file
> with
> >>> tight permissions to avoid having to type the parameters on the
> command line
> >>> every time you start fs_cli.
> >>>
> >>>
> >>>
> >>> Check the ‘command-line Interface fs_cli’ Confluence page for all the
> >>> details.
> >>>
> >>>
> >>>
> >>> Bote
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> From: Richard Mace
> >>> Sent: Friday, 06 March, 2015 14:34
> >>> Subject: [Freeswitch-users] fs_cli will not connect on Fresh install on
> >>> Debian
> >>>
> >>>
> >>>
> >>> Hi All,
> >>>
> >>> I did a fresh install of both Debian and FreeSWITCH today, following
> the
> >>> article here:
> >>>
> >>> https://freeswitch.org/confluence/display/FREESWITCH/Debian
> >>>
> >>>
> >>>
> >>> However, after installation, fs_cli will not connect. Any ideas?
> >>>
> >>>
> >>>
> >>> Thanks
> >>>
> >>>
> >>>
> >>> Richard
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> _________________________________________________________________________
> >>> Professional FreeSWITCH Consulting Services:
> >>> consulting at freeswitch.org
> >>> http://www.freeswitchsolutions.com
> >>>
> >>> Official FreeSWITCH Sites
> >>> http://www.freeswitch.org
> >>> http://confluence.freeswitch.org
> >>> http://www.cluecon.com
> >>>
> >>> FreeSWITCH-users mailing list
> >>> FreeSWITCH-users at lists.freeswitch.org
> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >>> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >>> http://www.freeswitch.org
> >>
> >>
> >>
> >>
> _________________________________________________________________________
> >> Professional FreeSWITCH Consulting Services:
> >> consulting at freeswitch.org
> >> http://www.freeswitchsolutions.com
> >>
> >> Official FreeSWITCH Sites
> >> http://www.freeswitch.org
> >> http://confluence.freeswitch.org
> >> http://www.cluecon.com
> >>
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> http://www.freeswitch.org
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150310/6fe808dc/attachment-0001.html