[Freeswitch-users] New Debian FS vanilla install fails

[William King]

There is currently an issue being fixed where the libyuv.so was in the
wrong package. Your install should complete successfully if you also
install 'libyuv-dev'.

Don't forget that you'll need to install some default configs:
mkdir -p /etc/freeswitch/
cp -a /usr/share/freeswitch/conf/vanilla/* /etc/freeswitch/

William King
Senior Engineer
Quentus Technologies, INC
1037 NE 65th St Suite 273
Seattle, WA 98115
Main:   (877) 211-9337
Office: (206) 388-4772
Cell:   (253) 686-5518
william.king at quentustech.com

On 6/17/15 2:35 PM, Sean Devoy wrote:
> HI all,
> 
>  
> 
> I have a new Debian 8.1 (32 bit) server for testing.
> 
>  
> 
> I first did an apt-get install curl then per the instructions here:
> 
> https://freeswitch.org/confluence/display/FREESWITCH/Debian+7
> 
> I did this:
> 
> echo "deb http://files.freeswitch.org/repo/deb/debian/ `lsb_release -sc` main" >> /etc/apt/sources.list.d/freeswitch.list
> curl http://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add –
> apt-get update
> apt-get install freeswitch-meta-vanilla
> 
>  
> 
> It runs for less than a minute and dies at:
> 
> Setting up freeswitch-sysvinit (1.4.19~10~1-1~jessie+1) ...
> 
> Job for freeswitch.service failed. See 'systemctl status
> freeswitch.service' and 'journalctl -xn' for details.
> 
> invoke-rc.d: initscript freeswitch, action "start" failed.
> 
> dpkg: error processing package freeswitch-sysvinit (--configure):
> 
> subprocess installed post-installation script returned error exit status 1
> 
> Setting up freeswitch-systemd (1.4.19~10~1-1~jessie+1) ...
> 
> dpkg: dependency problems prevent configuration of freeswitch-init:
> 
> freeswitch-init depends on freeswitch-sysvinit (=
> 1.4.19~10~1-1~jessie+1); however:
> 
>   Package freeswitch-sysvinit is not configured yet.
> 
>  
> 
> dpkg: error processing package freeswitch-init (--configure):
> 
> dependency problems - leaving unconfigured
> 
>  
> 
>  
> 
> and ends shortly with:
> 
> Errors were encountered while processing:
> 
> freeswitch-sysvinit
> 
> freeswitch-init
> 
> E: Sub-process /usr/bin/dpkg returned an error code (1)
> 
>  
> 
> I ran the cmds it says:
> 
> systemctl status -l  freeswitch.service
> 
> * freeswitch.service - freeswitch
> 
>    Loaded: loaded (/lib/systemd/system/freeswitch.service; disabled)
> 
>    Active: failed (Result: start-limit) since Wed 2015-06-17 17:11:15
> EDT; 18min ago
> 
>  
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control
> process exited, code=exited status=1
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service
> entered failed state.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start
> request repeated too quickly, refusing to start.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service
> entered failed state.
> 
>  
> 
> journalctl -xn
> 
> -- Logs begin at Wed 2015-06-17 16:59:45 EDT, end at Wed 2015-06-17
> 17:17:01 EDT. --
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service: control
> process exited, code=exited status=1
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
> 
> -- Subject: Unit freeswitch.service has failed
> 
> -- Defined-By: systemd
> 
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> 
> --
> 
> -- Unit freeswitch.service has failed.
> 
> --
> 
> -- The result is failed.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service
> entered failed state.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: freeswitch.service start
> request repeated too quickly, refusing to start.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Failed to start freeswitch.
> 
> -- Subject: Unit freeswitch.service has failed
> 
> -- Defined-By: systemd
> 
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> 
> --
> 
> -- Unit freeswitch.service has failed.
> 
> --
> 
> -- The result is failed.
> 
> Jun 17 17:11:15 fstest.devoy.us systemd[1]: Unit freeswitch.service
> entered failed state.
> 
> Jun 17 17:11:54 fstest.devoy.us kernel: perf interrupt took too long
> (10077 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
> 
> Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session):
> session opened for user root by (uid=0)
> 
> Jun 17 17:17:01 fstest.devoy.us CRON[12431]: (root) CMD (   cd / &&
> run-parts --report /etc/cron.hourly)
> 
> Jun 17 17:17:01 fstest.devoy.us CRON[12430]: pam_unix(cron:session):
> session closed for user root
> 
>  
> 
> Did I misunderstand that Debian 8 was OK, in fact required at 1.6.n?
> 
>  
> 
> What am I missing?
> 
>  
> 
> Sean
> 
>  
> 
> 
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services: 
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>