[Freeswitch-users] Fwd: OverTime RAM usage keep inceasing

[indra sena]

Hi Vitalie,

Thanks for your suggestion. I was checking with cache/buffers and mysql
alloted RAM memory. Now it is ok.

I have one more concern as follows.

I have observed in freeswitch that, In case of  IVR scenario prior to the
bridge FreeSwitch plays IVR with the 1st priority codec then invite to the
bridge endpoint (B-leg) with SDP containing only the codec negotiated for
IVR. Also the answer (183 ) to originator(A-leg) with SDP containing only
with IVR negotiated codec.

I am having one issue here for example.

Originator(A-leg) sends invite with G729, G711 and Freeswitch negotiated
with G729 and starts playing IVR with G729 and answered(183) to originator
with SDP containing only G729. And Invited to termination endpoint with SDP
having only G729 and termination gateway having support of only G711, and
it is rejecting call after receiving invite with only G729.

It should be work like after IVR , invite can be having sdp with all the
originator supported codecs and if termination (b-leg) having different
priority codecs then it can send re-Invite sanding the same.

I have observed one issue in freeswitch Jeera (
https://freeswitch.org/jira/browse/FS-880) , but there is no solution in
that page.

Do we have any solution for this right now ?

Your answers will be very much helpful for me. I appreciate if you can
quick response or give some solution for this.

Thanks in advance.

Thanks & Regards,
GISR..



On Sun, Nov 23, 2014 at 1:02 AM, Vitalie Colosov <vetali100 at gmail.com>
wrote:

> Are you checking total RAM utilization or without cache/buffers?
>
> Can you run command "free" and paste the output?
>
> 2014-11-20 23:24 GMT-08:00 indra sena <myforums.indra at gmail.com>:
>
>>
>> Hi Team,
>>
>> I have observed that overtime RAM utilization/usage is keep increasing
>> maybe due to memory leaks ?
>>
>> when I put load initially it starts with 5GB/12GM RAM, I have kept for 15
>> hours load test and oberserved now it is using almost 11GB/12GB starts swap
>> also increasing now.
>>
>>
>> Do you have config changes to fix or to take as work around ?
>> How can we reduce RAM utilization overtime ?
>>
>>
>> Could you please provide some solution for this ?
>>
>> Thanks & Regards,
>> Indra.
>>
>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150108/7cd75b45/attachment.html