[Freeswitch-users] Help required

Mon Jan 5 08:00:49 MSK 2015

WRT autostart, that's built in to the stock Debian Freeswitch packages 
that you'd get with apt, no need to use git or compile from source. You 
can choose to install the default vanilla packages, or the whole lot, 
which is convenient if you want to tinker.

If you're forwarding ports manually, switch off UPNP (Universal Pain 'N' 
Punishment) since they are mutually exclusive in most cases.

*However*, I suspect that, if normal inbound/outbound calls are working 
fine and the issue is only when a call is being forwarded out, then this 
may be something other than NAT/FW, at least in the typical sense. Hop 
on to FS_CLI and capture some logs of the call progress, then past them 
here. What you're trying to do should work, I've had success doing 
similar things bouncing calls between Brisbane and Melbourne.

On 5/01/2015 12:35 PM, Richard Adams wrote:
>
> Ext-rtp-ip and exp-sip-ip are set to the public IP Address of our 
> internet connection.
>
> I pass all incoming calls to the internal profile for routing, and as 
> before, everything works beautifully.
>
> We're using UPNP, and the ports are forwarded correctly.
>
> Regards,
>
> Richard Adams
>
> /Technical Manager/
>
> *STENTOFON AUSTRALIA*? UNIT 2 / 670 MOUNTAIN HIGHWAY ? BAYSWATER VIC 
> 3153 ? AUSTRALIA
>
> PHONE: +61 3 9729 6600 ? FAX: +61 3 9729 0099 ? MOBILE: +61 404 058 798
>
> Richard.Adams at STENTOFON.COM.AU 
> <mailto:Richard.Adams at STENTOFON.COM.AU>? WWW.STENTOFON.COM.AU 
> <http://www.stentofon.com.au/>
>
> WWW.ZENITEL.COM <http://www.zenitel.com/>?WWW.DNH.NO <http://www.dnh.no/>
>
> cid:image001.jpg at 01CD7927.5758B850
>
> *From:*Moishe Grunstein [mailto:max at nysolutions.com]
> *Sent:* Monday, January 05, 2015 1:23 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Help required
>
> Well if internal IP's are in the SDP you will have audio NAT issues, 
> we need a bit more info about your config to start troubleshooting. 
> What profiles are you using, what do you have set for ext-rtp-ip and 
> ext-sip-ip. Are you using UPNP, STUN? Do you have ports forwarded?
>
> Thanks,
>
> Moishe Grunstein
>
> Tornado Computer Systems, Inc.
>
> 212.400.7650 888.IPPBX.US
> *Service Request Email: support at nysolutions.com 
> <mailto:support at nysolutions.com> *
>
> Polycom Certified VAR
> Microsoft Small Business Specialist, Cisco SMB Select Certified
>
> cid:image001.jpg at 01C72F94.9EE45D60 <http://www.nysolutions.com/>
>
> Computer Networking * Managed Services * IP Video Surveillance * 
> Network Assessments * Web Solutions * Voice over IP * Disaster 
> Recovery * Network Security * Site Surveys * CMS
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org 
> <mailto:freeswitch-users-bounces at lists.freeswitch.org> 
> [mailto:freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of 
> *Richard Adams
> *Sent:* Sunday, January 4, 2015 8:58 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Help required
>
> Hello,
>
> 1.  Everything is fine across the NAT for normal incoming and outgoing 
> calls.  I can't see any difference in the traces between an outgoing 
> call and a incoming to outgoing call.
>
> 2. Compile from source.
>
> Regards,
>
> Richard Adams
>
> /Technical Manager/
>
> *STENTOFON AUSTRALIA*? UNIT 2 / 670 MOUNTAIN HIGHWAY ? BAYSWATER VIC 
> 3153 ? AUSTRALIA
>
> PHONE: +61 3 9729 6600 ? FAX: +61 3 9729 0099 ? MOBILE: +61 404 058 798
>
> Richard.Adams at STENTOFON.COM.AU 
> <mailto:Richard.Adams at STENTOFON.COM.AU>? WWW.STENTOFON.COM.AU 
> <http://www.stentofon.com.au/>
>
> WWW.ZENITEL.COM <http://www.zenitel.com/>?WWW.DNH.NO <http://www.dnh.no/>
>
> cid:image001.jpg at 01CD7927.5758B850
>
> *From:*Moishe Grunstein [mailto:max at nysolutions.com]
> *Sent:* Monday, January 05, 2015 12:34 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] Help required
>
> 1)Typical NAT issue, 
> https://freeswitch.org/confluence/display/FREESWITCH/NAT 
> <https://freeswitch.org/confluence/display/FREESWITCH/NAT> and many 
> other NAT pages in the wiki
>
> 2)Which install method did you use? did you compile from source? Did 
> you create a init.d?
>
> Thanks,
>
> Moishe Grunstein
>
> Tornado Computer Systems, Inc.
>
> 212.400.7650 888.IPPBX.US
> *Service Request Email: support at nysolutions.com 
> <mailto:support at nysolutions.com> *
>
> Polycom Certified VAR
> Microsoft Small Business Specialist, Cisco SMB Select Certified
>
> cid:image001.jpg at 01C72F94.9EE45D60 <http://www.nysolutions.com/>
>
> Computer Networking * Managed Services * IP Video Surveillance * 
> Network Assessments * Web Solutions * Voice over IP * Disaster 
> Recovery * Network Security * Site Surveys * CMS
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org 
> <mailto:freeswitch-users-bounces at lists.freeswitch.org> 
> [mailto:freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of 
> *Richard Adams
> *Sent:* Sunday, January 4, 2015 8:19 PM
> *To:* freeswitch-users at lists.freeswitch.org 
> <mailto:freeswitch-users at lists.freeswitch.org>
> *Subject:* [Freeswitch-users] Help required
>
> Trying the mailing list for the first time.  Being in Australia puts 
> us out of step with timezones for the IRC.
>
> 3 issues;
>
>                 1.  No audio on calls when an external call is bridged 
> to another external location.
>
> We have a help desk number that we'd like to have dial an external 
> call group after hours.  Calls are routed first to an internal 
> extension, and then after a 20 second timer, to an external mobile 
> phone number.  When the call is answered internally, everything is 
> fine.  However, if the call diverts to the mobile phone, the call can 
> be answered but there is no audio in either direction.  My SIP Trunk 
> provider is blaming us for sending an internal IP address in the SDP 
> of the invite, but the invite packet is the same for a normal outgoing 
> call.
>
>                 2.  No autostart Freeswitch on system boot for Debian 
> 7 and current build.
>
> To attempt to correct #1, I rebuilt the server with a fresh Debian 7 
> installation and a Git based build and installation of FS, following 
> the directions for setting the autostart. However, the system does not 
> autostart, and requires the FS to be booted manually after power up.
>
>                 3.  The auto Makefile did not work.  It kept failing 
> on missing dependancies that should have been installed by the auto 
> makefile.  I ended up running it manually.
>
> If I can get some guidance please, and I'm happy to provide whatever 
> logging is required.
>
> Regards,
>
> Richard Adams
>
> /Technical Manager/
>
> *STENTOFON AUSTRALIA*? UNIT 2 / 670 MOUNTAIN HIGHWAY ? BAYSWATER VIC 
> 3153 ? AUSTRALIA
>
> PHONE: +61 3 9729 6600 ? FAX: +61 3 9729 0099 ? MOBILE: +61 404 058 798
>
> Richard.Adams at STENTOFON.COM.AU 
> <mailto:Richard.Adams at STENTOFON.COM.AU>? WWW.STENTOFON.COM.AU 
> <http://www.stentofon.com.au/>
>
> WWW.ZENITEL.COM <http://www.zenitel.com/>?WWW.DNH.NO <http://www.dnh.no/>
>
> cid:image001.jpg at 01CD7927.5758B850
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150105/0fe4fad9/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4139 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150105/0fe4fad9/attachment-0002.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2424 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150105/0fe4fad9/attachment-0003.jpe 