[Freeswitch-users] Want to use REFER to do transfers

Thu Jan 30 18:42:38 MSK 2014

Hey Brian,

Thank you for replying, hope this answers your question.

here is the call flow

bell SBC -> FreeSwitch -> EndPoint

when the Endpoints answers the call, I want to be able to hit transfer on the end point and do a blind or assisted transfer.

--
Georges Boulos
NGN/VoIP Emerging Technologies
Bell Canada (http://www.bell.ca)

Tel: 613.781.9016
Cell: 613.859.7420
georges.boulos at bell.ca 
1501 Bank St, Ottawa, ON, K1H 7Z1

On Jan 30, 2014, at 10:34 AM, <freeswitch-users-request at lists.freeswitch.org> wrote:

> Send FreeSWITCH-users mailing list submissions to
> 	freeswitch-users at lists.freeswitch.org
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> or, via email, send a message with subject or body 'help' to
> 	freeswitch-users-request at lists.freeswitch.org
> 
> You can reach the person managing the list at
> 	freeswitch-users-owner at lists.freeswitch.org
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of FreeSWITCH-users digest..."
> Today's Topics:
> 
>   1. Re: Want to use REFER to do transfers (Brian West)
>   2. Re: Billing options (DanB)
>   3. Re: Billing options (Cal Leeming [Simplicity Media Ltd])
> 
> From: Brian West <brian at freeswitch.org>
> Subject: Re: [Freeswitch-users] Want to use REFER to do transfers
> Date: January 30, 2014 10:20:56 AM EST
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Reply-To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> 
> 
> Georges,
> 	Can you outline how you ware trying to use the deflect app to send a refer?
> 
> --
> Brian West
> brian at freeswitch.org
> FreeSWITCH Solutions, LLC
> PO BOX 2531
> Brookfield, WI 53008-2531
> Twitter: @FreeSWITCH , @briankwest
> http://www.freeswitchbook.com
> http://www.freeswitchcookbook.com
> 
> T: +1.918.420.9001  |  F: +1.918.420.9002  |  M: +1.918.424.WEST
> iNUM: +883 5100 1420 9001
> ISN: 410*543
> Skype:briankwest
> PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> On Jan 30, 2014, at 8:07 AM, Georges Boulos <georges.boulos at bell.ca> wrote:
> 
>> Good Morning Everyone,
>> 
>> I work on the Bell Canada sip trunking product, and I want to use Freeswitch as my PBX to validate features on the product, and also put out sample configurations to anyone that wants to use freeswitch as a pbx with the service.
>> 
>> I'm fairly new to freeswitch and so far I'm very impressed with it, I need some help in order to tweak the dialplan to do Assisted transfers and blind transfers using the REFER method.
>> 
>> I've seen that you can use the deflect app in order to use the REFER method, but I have not been able to figure out how to include that in the dialplan for an on going call.
>> 
>> Any help would be greatly appreciated.
>> 
>> thx
>> ggb
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>> 
>> 
>> 
>> 
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://wiki.freeswitch.org
>> http://www.cluecon.com
>> 
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
> 
> 
> 
> 
> 
> 
> From: DanB <danb.lists at gmail.com>
> Subject: Re: [Freeswitch-users] Billing options
> Date: January 30, 2014 10:29:06 AM EST
> To: freeswitch-users at lists.freeswitch.org
> Reply-To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> 
> 
> Callum,
> 
> Sure, always welcome ;)!
> 
> Regarding checking how to use/integrate with your own mechanisms, I would suggest taking a look on the two tutorials we have published a while ago since they are more up to date with latest features  we got in (online CDRs, fraud detection/automatic mitigation, RPC server, various way to control balances and so on).
> 
> Here is the link towards the tutorials:
> http://cgrates.readthedocs.org/en/latest/tut_freeswitch.html
> 
> On the other hand if you want to go with your own development, let me know your particular questions and I can happily share out of what we have learned on the way ;).
> 
> DanB
> 
> 
> 
> From: "Cal Leeming [Simplicity Media Ltd]" <cal.leeming at simplicitymedialtd.co.uk>
> Subject: Re: [Freeswitch-users] Billing options
> Date: January 30, 2014 10:33:35 AM EST
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Reply-To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> 
> 
> Haha yeah, had a few run-ins with x-on in the past, fun times :P
> 
> Let us know how you get on - and feel free to join in on the Friday conference call, there's always people there happy to give their two cents.
> 
> Cal
> 
> 
> On Thu, Jan 30, 2014 at 3:09 PM, Callum Guy <callum.guy at x-on.co.uk> wrote:
> Thanks Dan - it'll take me a while to digest the docs on your website, and i'm actually watching your screencast on youtube at the moment to try and get a feel for the systems features and how it might integrate.
> 
> Also thanks for your response Cal, the self build would indeed be my preferred choice. In all honesty i'm mailing for my own interest at this time so i should probably have remembered to send from my personal address.. Highly amused by "X-on finally realized their systems need upgrading huh? ;)" - have you dealt with my employer before?! X-on are, of course, always upgrading our systems.
> 
> ______________________________
> 
> Callum Guy
> Developer
> 
> X-on
> Framlingham Technology Centre
> Station Road, Framlingham,
> Suffolk, IP13 9EZ
> 
> T       0333 332 0116
> E       callum.guy at x-on.co.uk
> 
> 
> 
> 
> X-on is a trading name of Storacall Technology Ltd a limited company registered in England and Wales
> Registered Office : Avaland House, 110 London Road, Apsley, Hemel Hempstead, Herts, HP3 9SD  
> Company Registration No. 2578478 
> 
> This email has been sent from X-on.The contents and attachments are confidential to the sender and the intended addressees.If the message
> is received by anyone other than the addressee please return the message to the sender by replying to it and then delete the message from 
> your computer without copying or disclosing the contents to anyone.Opinions, conclusions and statements of intent in this email are those of
> the sender and do not bind X-on unless confirmed by authorised representatives independently of this message.While best endeavours have 
> been taken to avoid transmission of viruses, it is the responsibility of the recipient to scan for these.Please note emails sent to and from X-on 
> are routinely monitored for record keeping and quality control, to ensure regulatory compliance and prevent unauthorised use of our systems.
> 
> Please consider the environment before printing this email.
> 
> 
> On 30 January 2014 14:57, Cal Leeming [Simplicity Media Ltd] <cal.leeming at simplicitymedialtd.co.uk> wrote:
> Hi Callum,
> 
> X-on finally realized their systems need upgrading huh? ;)
> 
> I spent some time researching this after I found FS, and quickly came to the conclusion that building our own was pretty much the best way forward if you want full control. There are tons of options out there, the only one that even came close to what we wanted was ITSPtec, and even that wasn't very good.
> 
> If you have a talented team of in-house programmers, then build your own and be prepared to spend 6 months minimum before you have anything close to a working beta. There are several ways you can do this, but seriously this is not a small task and there are an unbelievable amount of things to take into consideration.
> 
> If you want something out of the door quickly, review the features/pros/cons of each available solution and decide which one best fits your needs.
> 
> Cal
> 
> 
> 
> On Thu, Jan 30, 2014 at 1:29 PM, Callum Guy <callum.guy at x-on.co.uk> wrote:
> Thanks Avi, that looks like a neat little solution for billing. Unfortunately my requirements are for pre and post-pay billing and rating so i'm looking for options for a comprehensive package. 
> 
> I'm having a good look at the products listed on the wiki page http://wiki.freeswitch.org/wiki/Billing_Solutions of which ASTPP looks the best so far but i'm not finding answers in the documentation so i'm reaching out to the community for peoples experience.
> 
> Thanks again
> 
> ______________________________
> 
> Callum Guy
> Developer
> 
> X-on
> Framlingham Technology Centre
> Station Road, Framlingham,
> Suffolk, IP13 9EZ
> 
> T       0333 332 0116
> E       callum.guy at x-on.co.uk
> 
> 
> 
> 
> X-on is a trading name of Storacall Technology Ltd a limited company registered in England and Wales
> Registered Office : Avaland House, 110 London Road, Apsley, Hemel Hempstead, Herts, HP3 9SD  
> Company Registration No. 2578478 
> 
> This email has been sent from X-on.The contents and attachments are confidential to the sender and the intended addressees.If the message
> is received by anyone other than the addressee please return the message to the sender by replying to it and then delete the message from 
> your computer without copying or disclosing the contents to anyone.Opinions, conclusions and statements of intent in this email are those of
> the sender and do not bind X-on unless confirmed by authorised representatives independently of this message.While best endeavours have 
> been taken to avoid transmission of viruses, it is the responsibility of the recipient to scan for these.Please note emails sent to and from X-on 
> are routinely monitored for record keeping and quality control, to ensure regulatory compliance and prevent unauthorised use of our systems.
> 
> Please consider the environment before printing this email.
> 
> 
> On 30 January 2014 11:36, Avi Marcus <avi at avimarcus.net> wrote:
> I ended up writing my own rating system...
> 
> It sets the rate before hand, has a channel limit per account, and will schedule a cutoff when the balance reaches 0.
> It's not perfect for pre-bill (when you allow multiple channels and it's near 0 balance) but it's pretty good and has a full trail in the CDRs (as long as nothing crashes...)
> <action application="log" data="DEBUG Setting user outbound channel limit to 3."/>
> <action application="limit" data="hash outbound 1435 3"/>
> <action application="log" data="DEBUG Remaining for 1 channel: 543 minutes - 32597 seconds."/>
> <action application="export" data="nolocal:api_on_answer=sched_transfer +32597 ${uuid} cutoff_incall"/>
> 
> -Avi
> 
> On Wed, Jan 29, 2014 at 3:29 PM, Callum Guy <callum.guy at x-on.co.uk> wrote:
> Hi All,
> 
> I have been looking at some options for handling pre and post pay billing operations and wanted to ask the community for any feedback they might have.
> 
> The obvious starting choice would be mod_nibblebill however i am unclear about the maturity of this module and its flexibility with ever changing rates and destinations, although I could probably work around it if stable. Part of me also wonders if inclusion of billing in heartbeat events is going to affect performance at peak times.
> 
> Another option being considered is the following and i'd be keen to hear from anyone with experience of this software:
> 
> http://portaone.com/portabilling/
> 
> It offers complete pre and post pay billing solution via radius, sounds like a clean and simple implementation but i'm struggling to anyone who has used it for a realistic review!
> 
> Thanks,
> 
> Callum
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> 
> 
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> 
> 
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> 
> 
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> 
> 
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
> 
> 
> 
> 
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
> 
> 
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140130/80beb9d9/attachment-0001.html 