[Freeswitch-users] 4 second delay in call.

Anthony Minessale anthony.minessale at gmail.com
Fri Jan 24 04:26:25 MSK 2014 

If you don't even ever see the logs or interact with FS over the API, I am
not sure how you have any chance.
Maybe load mod_event_socket and use fs_cli binary to turn on the debugging
and get the trace.....




On Thu, Jan 23, 2014 at 7:05 PM, Andrew <aademattia at comcast.net> wrote:

> Hi,
>
> Built my own exe and not using the console.  Console does do better
> performance than my .net exe.
>
> I start the server using
>
>
>
>           uint flags = (uint)(switch_core_flag_enum_t.SCF_USE_AUTO_NAT);
>
>
>
>             String err = "";
>
>             freeswitch.switch_core_set_globals();
>
>
>
>             switch_status_t res = freeswitch.switch_core_init(flags,
> switch_bool_t.SWITCH_TRUE, ref err);
>
>             search_bind = FreeSWITCH.SwitchXmlSearchBinding.Bind(xml_search,
> switch_xml_section_enum_t.SWITCH_XML_SECTION_CONFIG);
>
>             event_bind = FreeSWITCH.EventBinding.Bind("SampleClient",
> switch_event_types_t.SWITCH_EVENT_ALL, null, event_handler, true);
>
>             freeswitch.switch_core_init_and_modload(flags, switch_bool_t.SWITCH_TRUE,
> ref err);
>
>
>
>
>
> I then get the incoming even then I call the code for bridge.
>
> From the start of the incoming call to bridge code takes less than one sec.
>
> Here is part of the incoming call. (I had to crop it)
>
> First two is incoming call and 3248 is the sent message to my provider.
>
>
>
>
>
> [image: cid:image001.png at 01CF1875.DF84B410]
>
>
>
> I am running in 64bit mode and this happens in less than 100 cps.
>
>
>
> I have spent almost ½ year on this project to fail.
>
>
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Anthony
> Minessale
> *Sent:* Thursday, January 23, 2014 7:50 PM
>
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] 4 second delay in call.
>
>
>
> I'm not getting mixed up in some attempt to achieve 700cps, we don't have
> time for that kind of help. =D
>
>
>
> When I suggested the console I was telling you to make the call and look
> at the console with the commands I provided enabled so you could debug
> where the time was being spent.
>
>
>
>
>
>
>
>
>
> On Thu, Jan 23, 2014 at 6:21 PM, Andrew <aademattia at comcast.net> wrote:
>
> My brother did something using the console and made a .net dll and he gets
> 250 CPS+
>
> We are going to be renting a 64 CPU and 128 gb ran to run Freeswitch.
>
> We need to get 700 cps per profile and  hoping the super server will do it.
>
>
>
> I just don’t know why freeswitch is not working well when it’s a .net exe
> vs c++ or c exe.
>
>
>
> .net is not having the issue so I can only guess its something else.
>
> My brother said when using the console it is using a lot more threads then
> my .net exe.  I am sure why.
>
> On event of incoming call I start a new thread.  I do my LCR ado async.
>
> When the even comes back I start another tread to make the call.  Again
> all of this happens in less than a second more like 500 or less mill sec.
>
>
>
> The only difference in the config file is I am passing the gateway in code
> and build my own start up exe.
>
>
>
>
>
> I am willing to send the source code if it helps.
>
> Andrew
>
>
>
>
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Anthony
> Minessale
> *Sent:* Thursday, January 23, 2014 7:01 PM
> *To:* FreeSWITCH Users Help
> *Subject:* Re: [Freeswitch-users] 4 second delay in call.
>
>
>
> Did you ever get a trace on the console
>
>
>
> console loglevel debug
>
> sofia global siptrace on
>
> sofia tracelevel alert
>
>
>
>
>
> On Thu, Jan 23, 2014 at 5:46 PM, Andrew <aademattia at comcast.net> wrote:
>
> I know most of the people don’t like windows but I am looking for some
> help.
>
> I am building a switch and the exe is done in .net.
>
> I have everything in threads.  I found that I will take in a call then do
> a bridge all in less than 1 second.
>
> When doing a wire shark trace it looks like the bridge call take almost
> 4-6 seconds to send a request.
>
> I am close to giving up.  I did a study and traced every step of my code
> and its clear its not .net  due to the call will come in and out in less
> than a sec.
>
>
>
> Again all of this from incoming to bridge happens in less than 1 second
> but wire shark shows almost 4 seconds from incoming to outgoing call.
>
>
>
> string Route = "{bypass_media=" + MediaByPass + ",hangup_after_bridge=true,hangup_complete_with_xml=true,continue_on_fail=true,execute_on_answer=sched_hangup
> +" + SecMaxTalkTime + " alloted_timeout, ignore_early_media=true,
> origination_caller_id_number=" + CallerIDNumber + ",
> origination_caller_id_name=" + CallerIDName + ",originate_timeout=" +
> RingTimeOUT + ",call_timeout=" + RingTimeOUT + ",progress_timeout=" + PDD
> + ",fail_on_single_reject=USER_BUSY NO_ANSWER NO_USER_RESPONSE
> ORIGINATOR_CANCEL} " + DialPath;
>
>             ManagedSession leg_A = new ManagedSession(UUID_LegA);
>
>            // leg_A.begin_allow_threads();
>
>             leg_A.SetVariable("bypass_media", MediaByPass.ToString());
>
>
>
>             leg_A.Execute("bridge", Route);
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
>
>
> --
>
> Anthony Minessale II       ♬ @anthmfs  ♬ @FreeSWITCH  ♬
>
>
>
> ☞ http://freeswitch.org/  ☞ http://cluecon.com/  ☞
> http://twitter.com/FreeSWITCH
>
> ☞ irc.freenode.net #freeswitch ☞ http://freeswitch.org/g+
>
> ClueCon Weekly Development Call
>
> ☎ sip:888 at conference.freeswitch.org  ☎ +19193869900
>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
>
>
> --
>
> Anthony Minessale II       ♬ @anthmfs  ♬ @FreeSWITCH  ♬
>
>
>
> ☞ http://freeswitch.org/  ☞ http://cluecon.com/  ☞
> http://twitter.com/FreeSWITCH
>
> ☞ irc.freenode.net #freeswitch ☞ http://freeswitch.org/g+
>
> ClueCon Weekly Development Call
>
> ☎ sip:888 at conference.freeswitch.org  ☎ +19193869900
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>


-- 
Anthony Minessale II       ♬ @anthmfs  ♬ @FreeSWITCH  ♬

☞ http://freeswitch.org/  ☞ http://cluecon.com/  ☞
http://twitter.com/FreeSWITCH
☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+
<http://freeswitch.org/g+>*

ClueCon Weekly Development Call
☎ sip:888 at conference.freeswitch.org  ☎ +19193869900
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140123/40874d4b/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 18637 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140123/40874d4b/attachment-0001.jpe

Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users mailing list