[Freeswitch-users] How to get the network address of registered Endpoint (NAT Problem)

[Francis]

1. Have you turned on STUN on the phone?
2. Does the phone support any kind of NAT keepalive, say 20 seconds or so?
3. Does the phone support RPORT?
4. Is there a firewall on the freeswitch server, and if so, are the 
appropriate SIP and RTP ports open to new traffic?
5. Does the router have SIP ALG disabled? (yes is a good answer :)

One more question- is the freeswitch server behind a nat as well, or 
does it have it's own public IP address?


On 7/01/2014 6:38 PM, Mitja wrote:
> Hello there,
>
> Im trying to solve NAT related Problem which is caused by missbehaving
> SIP phone.
> Up Front: I searched the wiki and the web for all the NAT related
> sites/mailling list. I think its a error of the invoxia IPhone docking
> station (the missbehaving SIP phone), thus I did not open a jira for it.
>
> We have a freeswitch server with internet accessibility and a Phone
> behind a natting router (Fritz!Box).
> FreeSWITCH (1.2.3.4) <-> (10.11.12.13) NAT (192.168.0.1) <->
> (192.168.0.2) SIP Phone
>
> The Phone is able to register and initiate calls. But when someone else
> to call that endpoint, its unreachable.
>
> I did some research and the problem seems to be that the phone registers
> with a Contact containing the private IP Adress (192.168.0.2).
>
> freeswitch at 1.2.3.4@internal> sofia status profile internal reg
>
> Registrations:
> =================================================================================================
>
> Call-ID:        aeac7f28-a6a0-4ba1-9d7c-30934924726d
> User:           270 at 1.2.3.4
> Contact:        "user" <sip:270 at 192.168.0.2:52767;ob>
> Agent:          invoxia-lemonvoice-v6.17.4
> Status:         Registered(UDP)(unknown) EXP(2014-01-06 13:06:35)
> EXPSECS(134)
> Host:           ippbx-border
> IP:             10.11.12.13
> Port:           52767
> Auth-User:      270
> Auth-Realm:     1.2.3.4
> MWI-Account:    270 at 1.2.3.4
>
> Other devices in the same Setup have their NAT IP [+Port]
> (10.11.12.13:52767) in their Contact Header which then works fine. In
> this setup however the FreeSWITCH tries to send the INVITE Message to
> 192.168.0.2 and even when a NAT Table on the firewall manages to map it
> to 10.11.12.13:52767 the answer from 10.11.12.13 is discarded.
>
> Normally I use bridge with user/270 at 1.2.3.4 with the dialstring
> "{presence_id=${dialed_user}@${dialed_domain}}${sofia_contact(internal/${dialed_user}@${dialed_domain})}".
> I tried to force freeswitch to use the NAT IP address by calling bridge
> with "sofia/internal/sip:270 at 10.11.12.13:52767;ob" which worked fine.
> The IP address is of course not static but if I would be able to extract
> the IP information which is stored in sofia registry (see above) I could
> arrange my dialplan in a way that would fix that phones missbehaviour.
>
> So after all that describing text (sorry for that), heres my question:
> Is there a way (an API or Dialplan command) to get the IP Information
> which is stored the sofia registry.
>
> Thanks in advance
>
> Regards,
> Mitja
>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org