[Freeswitch-users] Need help setting up Freeswitch with commercial SSL certificate

[Brian West]

http://www.sslshopper.com/ssl-checker.html

I use this to test, if your OpenSSL install doesn't have the chain certs it
can't verify the chain unless you provide it.


On Tue, Aug 26, 2014 at 12:21 PM, Szeto, Steven <steven_szeto at mitel.com>
wrote:

> I have also had issues with using third party certs with FreeSwitch. If I
> generated my own certs and used them with a FSClient, I can get the
> FSClient to register via TLS to my FreeSwitch server.
>
> However, I was unable to install the generated certs into my SIP phones
> and get them to register with my FreeSwitch server. I think there is a bit
> of work required here to get FreeSwitch to be a bit more flexible in its
> TLS registration protocol.
>
> Ideally, we should also be able to install multiple root certificates for
> various phones and allow these phones to register with the FreeSwitch
> server. As far as I am aware, multiple root certificate support is not
> supported.
>
>
> On Tue, Aug 26, 2014 at 9:12 AM, Tim Smith <gb10hkzo-fs1 at yahoo.co.uk>
> wrote:
>
>> Hi,
>>
>> The story so far :
>>
>> • I've installed new certs
>> • checked config in vars.xml is pointing to the right place
>> • restarted freeswitch entirely
>> • it is still using some sort of internal certificates ?? cafile and
>> agent contain my certs and not those referred to in the openssl output ??
>>
>> What am I missing ??
>>
>> Thanks
>>
>> Tim
>>
>>
>>
>> FreeSWITCH Version 1.4.8+git~20140821T185758Z~1fe89f530f~64bit (git
>> 1fe89f5 2014-08-21 18:57:58Z 64bit)
>>
>>
>> /usr/local/freeswitch/conf/ssl# openssl verify -CAfile cafile.pem
>> agent.pem
>> agent.pem: OK
>>
>> /usr/local/freeswitch/conf# cat vars.xml | grep ssl
>>      valid options: sslv2,sslv3,sslv23,tlsv1,tlsv1.1,tlsv1.2
>>   <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=true"/>
>>   <X-PRE-PROCESS cmd="set" data="internal_ssl_dir=$${base_dir}/conf/ssl"/>
>>   <X-PRE-PROCESS cmd="set" data="external_ssl_enable=true"/>
>>   <X-PRE-PROCESS cmd="set" data="external_ssl_dir=$${base_dir}/conf/ssl"/>
>>
>> $ openssl s_client -showcerts -connect my.server:5061
>> CONNECTED(00000003)
>> depth=0 /C=US/CN=FreeSWITCH
>> verify error:num=18:self signed certificate
>> verify return:1
>> depth=0 /C=US/CN=FreeSWITCH
>> verify return:1
>> ---
>> Certificate chain
>>  0 s:/C=US/CN=FreeSWITCH
>>    i:/C=US/CN=FreeSWITCH
>> -----BEGIN CERTIFICATE-----
>> -----END CERTIFICATE-----
>> ---
>> Server certificate
>> subject=/C=US/CN=FreeSWITCH
>> issuer=/C=US/CN=FreeSWITCH
>> ---
>> No client certificate CA names sent
>> ---
>> SSL handshake has read 615 bytes and written 328 bytes
>> ---
>> New, TLSv1/SSLv3, Cipher is AES256-SHA
>> Server public key is 1024 bit
>> Secure Renegotiation IS supported
>> Compression: NONE
>> Expansion: NONE
>> SSL-Session:
>>     Protocol  : TLSv1
>>     Cipher    : AES256-SHA
>>     Session-ID:
>>     Session-ID-ctx:
>>     Master-Key:
>>     Key-Arg   : None
>>     Start Time:
>>     Timeout   : 300 (sec)
>>     Verify return code: 18 (self signed certificate)
>> ---
>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> 
>> 
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
>
>
>
> --
>
> *Regards,*
>
> *Steve Szeto*
>
> *MiContact Center IVR Team*
>
> *Software Designer*
>
> Tel.: 613-592-5660 Ext. 71698
>
> Email: steven_szeto at mitel.com <steven_szeto at mitel.com_>
>
>
>
>
>
>
> 350 Legget Drive
>
> Kanata, ON
>
> Canada K2K 2W7
>
> *www.mitel.com <http://www.mitel.com/_>*
>
> This e-mail (including any attachments) is for the sole use of the
> intended recipient(s) and may contain information that is confidential
> and/or protected by legal privilege. Any unauthorized review, use, copy,
> disclosure or distribution of this e-mail is strictly prohibited. If you
> are not the intended recipient, please notify Mitel immediately and destroy
> all copies of this e-mail.  Mitel does not accept any liability for breach
> of security, error or virus that may result from the transmission of this
> message.
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> 
> 
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>



-- 

*Brian West*
brian at freeswitch.org


*Twitter: @FreeSWITCH , @briankwest*
http://www.freeswitchbook.com
http://www.freeswitchcookbook.com

*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378)
*iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140826/696804b7/attachment-0001.html