[Freeswitch-users] About T.38 FAX Machine detail configuraion issue

[sparklezou]

Hi Steveu,

Thanks very much!

I didn't receive my previouse email and your reply email from this mail list. :-(

So I think, maybe my email problem, it was NOT send out. Then resend again.

Just checked, lost two email Issue 82 and Issue 85.

Please resend to my your reply email. Thanks very much! :-)

2014-04-11



sparklezou



发件人：Steve Underwood <steveu at coppice.org>
发送时间：2014-04-11 10:53
主题：Re: [Freeswitch-users] About T.38 FAX Machine detail configuraion issue
收件人："FreeSWITCH Users Help"<freeswitch-users at lists.freeswitch.org>
抄送：

Hi sparklezou, 

Why are you repeating yourself? If my previous reply didn't fully answer  
your questions you might at least reply to that and seek further help. 

Regards, 
Steve 

On 04/11/2014 10:35 AM, sparklezou wrote: 
> Hi All, 
> I have reviewed the Mod spandsp wiki  
> http://wiki.freeswitch.org/wiki/Mod_spandsp 
> There is an example about T.38 FAX. 
> *Samples* 
> 
> *Here is a working example using FreeSWITCH as a T.38-gateway. * 
> 
> *I used the following software and devices: * 
> 
>   * *FAX_B: Infotec IF2100e * 
>   * *ATA_B: Cisco 186 v3.2.1 * 
>   * *FAX_A: RICOH FAX2000L (Super G3, 14.400 Baud) * 
>   * *ATA_A: Grandstream HandyTone 502 * 
>       o *Product model: HT-502 V1.2A * 
>       o *Firmware: Program-- 1.0.3.10 Bootloader-- 1.0.0.9 Core-- 
>         1.0.3.6 Base-- 1.0.3.8 * 
>   * *FreeSWITCH: git head of 2010-11-19 * 
>   * *PRI E1-Stack: openzap * 
>   * *Sangoma-Wanpipe: version 3.5.17 * 
>   * *TDM-Card: Sangoma A104d* 
> 
> My questions: 
> 1. Is there any detail configuration manual for *RICOH FAX2000L? I  
> could NOT find on google also.* 
> ** 
> 2. I'm using RICHO MP2000. From the manual, seems it support T.38. But  
> only could set account, NO password. Freeswitch could accept account  
> without password? I also use Wireshark to catch the IP package. seems  
> NO sip regiest info from the RICHO MP2000. Also NO very detail  
> configuration manual from RICHO. 
> 3. Here the T.38 could connect to Freeswitch without ATA or NOT? it's  
> just in LAN? 
> Thanks all! 
> 2014-04-09 
> ------------------------------------------------------------------------ 
> sparklezou 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140411/207aaa45/attachment.html