[Freeswitch-users] [ERR] sofia_reg.c:2110 "some gateway" Registration Failed with status Unauthorized [401]. failure #37 (Snabel Kaabiya)

Russell Treleaven rtreleaven at bunnykick.ca
Thu Apr 10 02:00:22 MSD 2014 

slow clap!


On Wed, Apr 9, 2014 at 5:20 PM, Brian West <brian at freeswitch.org> wrote:

> Actually it is NOT a bug in FreeSWITCH, Your provider is broken, If they
> wish to start the auth over they should put stale=true, now we have to hack
> sofia to break the rules per the RFC and reset it as if we received a
> stale.  Again NOT OUR BUG.   I’m growing ever tired of SIP and all the work
> arounds we must do to accept an obvious broken behavior.  At some point it
> has to stop and we have to make vendors fix it (i.e. the people you $PAID$
> money for a commercial product thats behaving badly).  Yet everyone comes
> to us the FREE software and makes us work around it which is not fair.
>
> sigh…
>
> --
> Brian West
> brian at freeswitch.org
> FreeSWITCH Solutions, LLC
> PO BOX 2531
> Brookfield, WI 53008-2531
> Twitter: @FreeSWITCH , @briankwest
> http://www.freeswitchbook.com
> http://www.freeswitchcookbook.com
>
> T: +1.918.420.9001  |  F: +1.918.420.9002  |  M: +1.918.424.WEST
> iNUM: +883 5100 1420 9001
> ISN: 410*543
> Skype:briankwest
> PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Apr 9, 2014, at 9:25 AM, Snabel Kabiya <snabel at lexifone.com> wrote:
>
> > Hi,
> >
> > This seems to be a freeswitch bug:
> >
> > http://jira.freeswitch.org/browse/FS-6287
> >
> > Thanks,
> > Snabel Kaabiya
> >
> >
> > On Tue, Apr 8, 2014 at 9:25 PM, <
> freeswitch-users-request at lists.freeswitch.org> wrote:
> > Send FreeSWITCH-users mailing list submissions to
> >         freeswitch-users at lists.freeswitch.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > or, via email, send a message with subject or body 'help' to
> >         freeswitch-users-request at lists.freeswitch.org
> >
> > You can reach the person managing the list at
> >         freeswitch-users-owner at lists.freeswitch.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of FreeSWITCH-users digest..."
> >
> > Today's Topics:
> >
> >    1. Re: mod_skinny --> Calling numbers with various   lenght (MS-R-IT)
> >    2. Re: Delayed sound after answer (Anthony Minessale)
> >    3. Re: Delayed sound after answer (Oleg Stolyar)
> >    4. Re: [ERR] sofia_reg.c:2110 "some gateway" Registration Failed
> >       with status Unauthorized [401]. failure   #37 (Snabel Kaabiya)
> >       (Brian West)
> >
> >
> > ---------- Forwarded message ----------
> > From: "MS-R-IT" <martin.schoepfer at ms-r-it.de>
> > To: "'FreeSWITCH Users Help'" <freeswitch-users at lists.freeswitch.org>
> > Cc:
> > Date: Tue, 8 Apr 2014 19:58:15 +0200
> > Subject: Re: [Freeswitch-users] mod_skinny --> Calling numbers with
> various lenght
> > Hello Nathan,
> >
> > thanks for your reply can i have checked this hack but i don´t think
> this is
> > a solution to communicate. Are there any plans to get this function into
> > freeswitch in the future?
> > I check now how I could handle the cisco phones temporary with a small
> > asterisk chan_sccp connected to freeswitch. Is there any way to get
> > chan_sccp transformed to
> > Freeswitch! Because its Opensource too! I only able to program some
> smalls
> > things in C or C++ so I have to ask if it is any reason and then I can
> check
> > it by myself!
> >
> > Thank you for your informations. I think you have luck with NANP!! :-)
> >
> > Mit freundlichen Grüßen
> >
> > Martin Schöpfer
> >
> >
> ____________________________________________________________________________
> > __________
> >
> > MS-R-IT
> > Martin Schöpfer
> > Regelungs- und Informationstechnik
> > Bergham 3
> > 83052 Bruckmühl
> > Tel.:  08062 7238870
> > Fax.: 08062 7238871
> > Mobil: 0176 80088253
> >
> >
> > -----Ursprüngliche Nachricht-----
> > Von: freeswitch-users-bounces at lists.freeswitch.org
> > [mailto:freeswitch-users-bounces at lists.freeswitch.org] Im Auftrag von
> Nathan
> > Neulinger
> > Gesendet: Dienstag, 8. April 2014 19:41
> > An: FreeSWITCH Users Help
> > Betreff: Re: [Freeswitch-users] mod_skinny --> Calling numbers with
> various
> > lenght
> >
> > On 04/08/2014 12:10 PM, MS-R-IT wrote:
> > > Hello,
> > >
> > > yes they can overlap you can have different length with overlap like
> > > my company siemens the central has the number 3-digit prefix (yes this
> can
> > also be) then 4-digit four our site (like 9221) and 0 for our central and
> > 5910 for me directly.
> > >
> > > There are many else expressions I could give you emergency call in
> > > Germany is 110 and 112 but there can be number with 110XXXXX too!
> >
> > This is not something you'll be able to do with the current built-in dial
> > handling for mod_skinny currently because of how it processes the
> dialing.
> >
> > The key part of the current processing for this is in
> > skinny_handle_keypad_button_message() where it calls
> > skinny_session_process_dest() with the non-null 2nd to last argument
> > (append_dest).
> >
> > The processing sets call to routing state after each digit in that
> routine.
> >
> > What would need to happen is some sort of time delayed callback to have
> it
> > not send the call to routing state until a certain time has elapsed.
> >
> >
> > You could do a workaround of requiring a terminating digit (# or
> something
> > like that) to "dial" - that would work with
> > current code, but is definitely a hack.
> >
> >
> > -- Nathan
> >
> > ------------------------------------------------------------
> > Nathan Neulinger                       nneul at mst.edu
> > Missouri S&T Information Technology    (573) 612-1412
> > System Administrator - Architect
> >
> > _________________________________________________________________________
> > Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > 
> > 
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://wiki.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Anthony Minessale <anthony.minessale at gmail.com>
> > To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> > Cc:
> > Date: Tue, 8 Apr 2014 13:04:48 -0500
> > Subject: Re: [Freeswitch-users] Delayed sound after answer
> > Its probably based on your network.  Are you behind NAT?  Sometimes it
> takes a few seconds for the automatic translation to kick in.
> > You can add a sleep 1000 after answer to ensure you have established
> media before you play the tone.
> >
> >
> >
> > On Mon, Apr 7, 2014 at 5:10 PM, Oleg Stolyar <olegstolyar at gmail.com>
> wrote:
> > Hi guys,
> >
> > I have the following in my dialplan:
> >
> >       <condition field="${<some field>}" expression="<some expression>">
> >         <action application="answer"/>
> >         <action application="set" data="api_hangup_hook=curl <some
> URL>"/>
> >         <action application="playback"
> data="tone_stream://v=0;%(1000,0,600)" />
> >         <action application="conference" data="$1 at default"/>
> >       </condition>
> >
> > Notice the line in bold.  In most cases the tone plays fine but in some
> cases it is shorter than 1 second and in a few cases it does not play at
> all.  Has anyone run into this?  Is there a way to make the occasional
> media delay after answer go away?
> >
> > _________________________________________________________________________
> > Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > 
> > 
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://wiki.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> >
> >
> > --
> > Anthony Minessale II       ♬ @anthmfs  ♬ @FreeSWITCH  ♬
> >
> > ☞ http://freeswitch.org/  ☞ http://cluecon.com/  ☞
> http://twitter.com/FreeSWITCH
> > ☞ irc.freenode.net #freeswitch ☞ http://freeswitch.org/g+
> >
> > ClueCon Weekly Development Call
> > ☎ sip:888 at conference.freeswitch.org  ☎ +19193869900
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Oleg Stolyar <olegstolyar at gmail.com>
> > To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> > Cc:
> > Date: Tue, 8 Apr 2014 12:12:42 -0600
> > Subject: Re: [Freeswitch-users] Delayed sound after answer
> > Thanks Anthony, I'll try that.
> >
> >
> > On Tue, Apr 8, 2014 at 12:04 PM, Anthony Minessale <
> anthony.minessale at gmail.com> wrote:
> > Its probably based on your network.  Are you behind NAT?  Sometimes it
> takes a few seconds for the automatic translation to kick in.
> > You can add a sleep 1000 after answer to ensure you have established
> media before you play the tone.
> >
> >
> >
> > On Mon, Apr 7, 2014 at 5:10 PM, Oleg Stolyar <olegstolyar at gmail.com>
> wrote:
> > Hi guys,
> >
> > I have the following in my dialplan:
> >
> >       <condition field="${<some field>}" expression="<some expression>">
> >         <action application="answer"/>
> >         <action application="set" data="api_hangup_hook=curl <some
> URL>"/>
> >         <action application="playback"
> data="tone_stream://v=0;%(1000,0,600)" />
> >         <action application="conference" data="$1 at default"/>
> >       </condition>
> >
> > Notice the line in bold.  In most cases the tone plays fine but in some
> cases it is shorter than 1 second and in a few cases it does not play at
> all.  Has anyone run into this?  Is there a way to make the occasional
> media delay after answer go away?
> >
> > _________________________________________________________________________
> > Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > 
> > 
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://wiki.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> >
> >
> > --
> > Anthony Minessale II       ♬ @anthmfs  ♬ @FreeSWITCH  ♬
> >
> > ☞ http://freeswitch.org/  ☞ http://cluecon.com/  ☞
> http://twitter.com/FreeSWITCH
> > ☞ irc.freenode.net #freeswitch ☞ http://freeswitch.org/g+
> >
> > ClueCon Weekly Development Call
> > ☎ sip:888 at conference.freeswitch.org  ☎ +19193869900
> >
> >
> > _________________________________________________________________________
> > Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > 
> > 
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://wiki.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Brian West <brian at freeswitch.org>
> > To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> > Cc:
> > Date: Tue, 8 Apr 2014 13:25:05 -0500
> > Subject: Re: [Freeswitch-users] [ERR] sofia_reg.c:2110 "some gateway"
> Registration Failed with status Unauthorized [401]. failure #37 (Snabel
> Kaabiya)
> > This is a bug in the provider, If they want to start auth over they
> should say stale=‘true’, this way the NC will start back at 1.  not 18e
> > --
> > Brian West
> > brian at freeswitch.org
> > FreeSWITCH Solutions, LLC
> > PO BOX 2531
> > Brookfield, WI 53008-2531
> > Twitter: @FreeSWITCH , @briankwest
> > http://www.freeswitchbook.com
> > http://www.freeswitchcookbook.com
> >
> > T: +1.918.420.9001  |  F: +1.918.420.9002  |  M: +1.918.424.WEST
> > iNUM: +883 5100 1420 9001
> > ISN: 410*543
> > Skype:briankwest
> > PGP Key: http://www.bkw.org/key.txt (AB93356707C76CED)
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On Apr 8, 2014, at 7:07 AM, Steven Ayre <steveayre at gmail.com> wrote:
> >
> > > It's not the first request because it's sending a challenge response
> using a nonce, which it must have received in a previous challenge (401)...
> It can't just make that up.
> >
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
> >
> > _________________________________________________________________________
> > Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > 
> > 
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://wiki.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140409/93df53f6/attachment-0001.html

Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users mailing list